Screening of nerve agent degradation products by MALDI-TOFMS

A novel method for the rapid screening of degradation products derived from nerve agents by matrix-assisted laser desorption ionization time-of-flight mass spectrometry is described. Five standard products were selected as model compounds, including isopropyl methylphosphonic acid (IMPA), pinacolyl methylphosphonic acid (PMPA), ethyl methylphosphonic acid (EMPA), isobutyl methylphosphonic acid (i-BuMPA), and cyclohexyl methylphosphonic acid (CHMPA), which are degradation products of Sarin (GB), Soman (GD), VX, Russian VX (RVX), and GF, respectively. For comparison, CHCA (alpha-cyano-4-hydroxycinnamic acid) and DCCA (7-(diethylamino)coumarin-3-carboxylic acid) were used as the MALDI-matrix when the third harmonic generation (355 nm) of a Nd:YAG laser and a hydrogen Raman laser (multifrequency laser) were used, respectively. The method permitted the five nerve agent degradation products to be screened rapidly and successfully, suggesting that it has the potential for use as a routine monitoring tool.     

Time-Efficient LC/MS/MS Determination of Low Concentrations of Methylphosphonic Acid

A time-efficient protocol for quantification of methylphosphonic acid (MPA), a final hydrolysis product of nerve agents in aqueous environments, via liquid chromatography mass spectrometry is described. Chromatographic separation and mass spectrometry detection conditions are optimized to enable high sensitivity, selectivity, and accuracy of the approach and to eliminate impeding matrix effects associated with the analysis of water samples of natural origin. The developed technique is tested by analyzing the samples of natural waters that are spiked with a known quantity of MPA. With direct LC/MS/MS, the detection limit for MPA in natural waters is 10 ng/mL.     

Potentiometric sensing of chemical warfare agents: surface imprinted polymer integrated with an indium tin oxide electrode

Rapid and specific recognition of methylphosphonic acid (MPA), the degradation product of nerve agents sarin, soman, VX, etc., was achieved with potentiometric measurements using a chemical sensor fabricated by a surface imprinting technique coupled with a nanoscale transducer, indium tin oxide (ITO). An octadecylsiloxane thin layer was covalently bound to the ITO-coated glass surface in the presence of MPA. After extraction of MPA, potentiometric measurements showed selective detection of MPA. The selectivity of the sensor has been tested on other alkylphosphonic acids, such as ethylphosphonic acid and propylphosphonic acid, as well as tert-butylphosphonic acid. The viability of the sensor in the presence of other chemical analogues, such as organophosphorus pesticides and herbicides, was investigated.     

Ultraviolet Raman spectra and cross-sections of the G-series nerve agents

Ultraviolet (UV) Raman spectroscopy is being applied to the detection of chemical agent contamination of natural and man-made surfaces. In support of these efforts, we have measured the UV Raman signatures of the G-series nerve agents GA (tabun), GB (sarin), GD (soman), GF (cyclosarin), and the agent simulant diisopropyl methylphosphonate (DIMP) at 248 nm and 262 nm, as well as taking their UV Raman and UV absorption cross-sections. Of these chemicals, only GA exhibits any significant pre-resonance enhancement. We also show that reduction of the excitation wavelength from 262 nm to 248 nm effectively shifts the Raman spectrum away from a substantial sample fluorescence background, implying a significant improvement in detection capability.     

Direct sampling of chemical weapons in water by photoionization mass spectrometry

The vulnerability of water supplies to toxic contamination calls for fast and effective means for screening water samples for multiple threats. We describe the use of photoionization (PI) mass spectrometry (MS) for high-speed, high-throughput screening and molecular identification of chemical weapons (CW) threats and other hazardous compounds. The screening technology can detect a wide range of compounds at subacute concentrations with no sample preparation and a sampling cycle time of approximately 45 s. The technology was tested with CW agents VX, GA, GB, GD, GF, HD, HN1, and HN3, in addition to riot agents and precursors. All are sensitively detected and give simple PI mass spectra dominated by the parent ion. The target application of the PI MS method is as a routine, real-time early warning system for CW agents and other hazardous compounds in air and in water. In this work, we also present comprehensive measurements for water analysis and report on the system detection limits, linearity, quantitation accuracy, and false positive (FP) and false negative rates for concentrations at subacute levels. The latter data are presented in the form of receiver operating characteristic curves of the form of detection probability P(D) versus FP probability P(FP). These measurements were made using the CW surrogate compounds, DMMP, DEMP, DEEP, and DIMP. Method detection limits (3sigma) obtained using a capillary injection method yielded 1, 6, 3, and 2 ng/mL, respectively. These results were obtained using 1-microL injections of water samples without any preparation, corresponding to mass detection limits of 1, 6, 3, and 2 pg, respectively. The linear range was about 3-4 decades and the dynamic range about 4-5 decades. The relative standard deviations were generally <10% at CW subacute concentrations levels.     

Surface-enhanced Raman spectra of VX and its hydrolysis products

Detection of chemical agents as poisons in water supplies not only requires microg/L sensitivity, but also requires the ability to distinguish their hydrolysis products. We have been investigating the ability of surface-enhanced Raman spectroscopy (SERS) to detect chemical agents at these concentrations. Here we expand these studies and present the SERS spectra of the nerve agent VX (ethyl S-2-diisopropylamino ethyl methylphosphonothioate) and its hydrolysis products, ethyl S-2-diisopropylamino methylphosphonothioate, 2(diisopropylamino) ethanethiol, ethyl methylphosphonic acid, and methylphosphonic acid. Vibrational mode assignments for the observed SERS peaks are also provided. Overall, each of these chemicals produces a series of peaks between 450 and 900 cm(-1) that are sufficiently unique to allow identification. SERS measurements were performed in silver-doped sol-gel-filled capillaries that are being developed as part of an extractive point sensor.     

Application of a microcoil probe head in NMR analysis of chemicals related to the chemical weapons convention

A 1.7-mm microcoil probe head was tested in the analysis of organophosphorus compounds related to the Chemical Weapons Convention. The microcoil probe head demonstrated a high mass sensitivity in the detection of traces of organophosphorus compounds in samples. Methylphosphonic acid, the common secondary degradation product of sarin, soman, and VX, was detected at level 50 ng (0.52 nmol) from a 30-microL water sample using proton-observed experiments. Direct phosphorus observation of methylphosphonic acid with (31)P{(1)H} NMR experiment was feasible at the 400-ng (4.17 nmol) level. Application of the microcoil probe head in the spiked sample analysis was studied with a test water sample containing 2-10 microg/mL of three organophosphorus compounds. High-quality (1)H NMR, (31)P{(1)H} NMR, 2D (1)H-(31)P fast-HMQC, and 2D TOCSY spectra were obtained in 3 h from the concentrated 1.7-mm NMR sample prepared from 1 mL of the water solution. Furthermore, a 2D (1)H-(13)C fast-HMQC spectrum with sufficient quality was possible to measure in 5 h. The microcoil probe head demonstrated a considerable sensitivity improvement and reduction of measurement times for the NMR spectroscopy in identification of chemicals related to the Chemical Weapons Convention.     

Measurements of chemical warfare agent degradation products using an electrophoresis microchip with contactless conductivity detector

This paper reports on a microfluidic device for the screening of organophosphonate nerve agent degradation products. The miniaturized system relies on an efficient chip-based separation of alkyl methylphosphonic acids (breakdown products of Sarin, Soman, and VX nerve agents) followed by their sensitive contactless conductivity detection. Experimental parameters relevant to the separation and detection processes have been optimized to yield high sensitivity (with 48-86 microg L(-1) detection limits), fast response (50 s for a three alkyl methylphosphonic acid mixture), high precision (RSD = 3.8-5.0%), and good linearity (over the 0.3-100 mg L(-1) range). Applicability to natural (river) water samples is demonstrated. The new microsystem offers promise for monitoring degradation products of chemical warfare agents, with advantages of speed/warning, efficiency, portability, sample size, and cost compared to conventional ion chromatography or capillary electrophoresis systems.     

Improved tert-butyldimethylsilylation gas chromatographic/mass spectrometric detection of nerve gas hydrolysis products from soils by pretreatment of aqueous alkaline extraction and strong anion-exchange solid-phase extraction

In the analysis of tert-butyldimethylsilyl derivatives (IBDMS) of alkyl methylphosphonic acids (RMPA) and methylphosphonic acid (MPA), from soils by gas chromatography/mass spectrometry (GC/MS), the detection yields are generally low, due to the suppression of TBDMS derivatization by the soil matrix components and the adsorption of RMPA and MPA to the soils. An ion-exchange pretreatment of the aqueous soil extract can be used to overcome the former factor by removing interfering compounds. A pretreatment method is described for improving the detection yields due to the latter factor, using an alkaline extraction procedure. The recovery was estimated quantitatively using capillary electrophoresis. The soil samples tested included volcanogenous immature soils and showed a low aqueous extraction recovery and GC/MS detection yields. The inclusion of sodium hydroxide in the extraction solvent dramatically increased the recovery. Using a 0.1 M sodium hydroxide solution, the recovery was in excess of 68%. Interfering components were removed from the alkaline soil extract by solid-phase extraction of the acids on a silica-based strong anion exchanger. The alkaline soil extract was neutralized with hydrofluoric acid and applied to the cartridge in the fluoride form. After washing with water, MPA and RMPA could be eluted with methanolic ammonia nearly quantitatively. Using the established pretreatment method, MPA and RMPA were detected from all the soil samples in more than 67% yield.     

V-type nerve agent detection using a carbon nanotube-based amperometric enzyme electrode

An enzyme electrode for the detection of V-type nerve agents, VX (O-ethyl-S-2-diisopropylaminoethyl methylphosphonothioate) and R-VX (O-isobutyl-S-2-diethylaminoethyl methylphosphonothioate), is proposed. The principle of the new biosensor is based on the enzyme-catalyzed hydrolysis of the nerve agents and amperometric detection of the thiol-containing hydrolysis products at carbon nanotube-modified screen-printed electrodes. Demeton-S was used as a nerve agent mimic. 2-(Diethylamino)ethanethiol (DEAET) and 2-(dimethylamino)ethanethiol (DMAET), the thiol-containing hydrolysis product and hydrolysis product mimic of R-VX and VX, respectively, were monitored by exploiting the electrocatalytic activity of carbon nanotubes (CNT). As low as 2 microM DMAET and 0.8 microM DEAET were detected selectively at a low applied potential of 0.5 V vs Ag/AgCl at a CNT-modified mediator-free amperometric electrode. Further, the large surface area and the hydrophobicity of CNT was used to immobilize organophosphorus hydrolase mutant with improved catalytic activity for the hydrolysis of the P-S bond of phosphothiolester neurotoxins including VX and R-VX nerve gases to develop a novel, mediator-free, membrane-free biosensor for V-type nerve agents. The applicability of the biosensor was demonstrated for direct, rapid, and selective detection of V-type nerve agents' mimic demeton-S. The selectivity of the sensor against interferences and application to spiked lake water samples was demonstrated.     

Chemical warfare agent detection using MEMS-compatible microsensor arrays

Microsensors have been fabricated consisting of TiO/sub 2/ and SnO/sub 2/ sensing films prepared by chemical vapor deposition (CVD) on microelectromechanical systems array platforms. Response measurements from these devices to the chemical warfare (CW) agents GA (tabun), GB (sarin), and HD (sulfur mustard) at concentrations between 5 nmol/mol (ppb) and 200 ppb in dry air, as well as to CW agent simulants CEES (chloroethyl ethyl sulfide) and DFP (diisopropyl fluorophosphate) between 250 and 3000 ppb, are reported. The microsensors exhibit excellent signal-to-noise and reproducibility. The temperature of each sensor element is independently controlled by embedded microheaters that drive both the CVD process (375/spl deg/C) and sensor operation at elevated temperatures (325/spl deg/C-475/spl deg/C). The concentration-dependent analyte response magnitude is sensitive to conditions under which the sensing films are grown. Sensor stability studies confirm little signal degradation during 14 h of operation. Use of pulsed (200 ms) temperature-programmed sensing over a broad temperature range (20/spl deg/C-480/spl deg/C) enhances analyte selectivity, since the resulting signal trace patterns contain primarily kinetic information that is unique for each agent tested.     

Adsorption of dimethyl methylphosphonate on metal impregnated carbons under static conditions

Active carbon, grade 80 CTC, of surface area 1199m(2)/g, 12x30 BSS particle size and coconut shell origin was impregnated (5%, W/W) with various impregnants such as Cu(II) 1,1,1,5,5,5-hexafluoroacetylacetonate, Cu(II) 1,1,1-trifluoroacetylacetonate, 1-phenylbute-1,3-dione-2-oxime plus Cu(II) using incipient wetness technique. These impregnated carbons along with active carbon (Grade 80 CTC) and whetlerite were studied for the adsorption of dimethyl methylphosphonate (DMMP) at 33+/-1 degrees C under static conditions. Cu(II) 1,1,1,5,5,5-hexafluoroacetylacetonate impregnated carbon system showed highest uptake (68.5%, W/W) of DMMP amongst all the carbon systems, however, active carbon with higher surface area could adsorb 61.5% (W/W) of DMMP under same conditions. It indicated that the adsorption by Cu(II) 1,1,1,5,5,5-hexafluoroacetylacetonate impregnated carbon was not only due to physisorption but chemisorption as well. Kinetics of adsorption was also studied and various parameters such as equilibration time, equilibration capacity, rate constant (k), diffusional exponent (n) and constant (K) were determined. Carbons with and without DMMP exposure were also studied using IR and TGA techniques. Reaction products were analyzed using gas chromatography coupled with mass spectrometry (GC/MS) and found to be methyl methylphosphonic acid (MMPA) and methylphosphonic acid (MPA) for Cu(II) 1,1,1,5,5,5-hexafluoroacetylacetonate impregnated carbon.     

Determination of trace amounts of chemical warfare agent degradation products in decontamination solutions with NMR spectroscopy

Decontamination solutions are used for an efficient detoxification of chemical warfare agents (CWAs). As these solutions can be composed of strong alkaline chemicals with hydrolyzing and oxidizing properties, the analysis of CWA degradation products in trace levels from these solutions imposes a challenge for any analytical technique. Here, we present results of application of nuclear magnetic resonance spectroscopy for analysis of trace amounts of CWA degradation products in several untreated decontamination solutions. Degradation products of the nerve agents sarin, soman, and VX were selectively monitored with substantially reduced interference of background signals by 1D 1H-31P heteronuclear single quantum coherence (HSQC) spectrometry. The detection limit of the chemicals was at the low part-per-million level (2-10 microg/mL) in all studied solutions. In addition, the concentration of the degradation products was obtained with sufficient confidence with external standards.     

Quantification of cytokines involved in wound healing using surface plasmon resonance

Sensing of three cytokines related to chronic wound healing, interleukin-1 (IL-1), interleukin-6 (IL-6), and tumor necrosis factor-alpha (TNF-alpha), with detection limits at or below 1 ng/mL in buffered saline solution and spiked cell culture medium (CCM) has been achieved. Fiber-optic surface plasmon resonance (SPR) sensors are coated with an antibody binding layer and antibodies specific to the cytokine of interest are covalently attached to this layer. To achieve such detection limits in a complex medium such as CCM, total protein content of 4 mg/mL, the use of a novel N-hydroxysuccinimide ester of 16-mercaptohexadecanoic acid (NHS-MHA) is necessary. A comparison of the detection limits for IL-6 using currently widely used CM-dextran and NHS-MHA shows an improvement by a factor of 3 using NHS-MHA. The detection limits for the monitoring of cytokines in spiked saline solutions and CCM were similar for TNF-alpha and slightly higher for IL-1 and IL-6. The detection of each cytokine in the presence of interfering agents resulted in concentration prediction well within the error of calibration. The SPR sensors are stable in CCM after 20 min of pretreatment in CCM, minimizing the reliance on a reference sensor to quantify the cytokines in complex media. This technique enables a major advancement in the field of real-time monitoring of biologically relevant molecules in complex biological fluids.     

Rapid screening of doping agents in human urine by vacuum MALDI-linear ion trap mass spectrometry

Detection of doping agents in urine frequently requires extensive separation prior to chemical analyses. Gas or liquid chromatography coupled to mass spectrometry has produced accurate and sensitive assays, but chromatographic separations require time and, sometimes, chemical derivatization. To avoid such tedious and lengthy procedures, vacuum matrix-assisted laser desorption ionization (vMALDI) coupled with the linear ion trap mass spectrometry (LIT/MS) technique is tested for its applicability as a rapid screening technique. Commonly used doping agents like nandrolone, boldenone, trenbolone, testosterone, and betamethasone were chosen as study compounds. Different MALDI matrixes like alpha-cyano-4-hydroxycinnamic acid (CHCA), dihyroxy benzoic acid (DHB) with and without cetyl trimethyl ammonium bromide (CTAB), a surfactant, and meso-tetrakis(pentafluorophenyl) porphyrin (F20TPP) were tested. Among them, F20TPP (MW 974.57 Da) was selected as the preferred matrix owing to the lack of interfering matrix peaks at the lower mass range (m/z 100-700). Urine samples spiked with study compounds were processed by solid-phase extraction (SPE) and consistently detected through a linear range of 0.1-100 ng/mL. The limit of detection and lower limit of quantification for all five analytes have been determined to be 0.03 and 0.1 ng/mL, respectively, in urine samples. Testosterone-d3 was used as an internal standard, and the quantitative measurements were achieved by the selective reaction monitoring (SRM) mode. The method was validated and showed consistency in the results. Hence, vMALDI-LIT/MS can be used as a rapid screening method to complement the traditional GC/MS and LC/MS techniques for simultaneous identification, confirmation, and quantification of doping agents in urine.     

A fully automated LC/MS method development and quantification protocol targeting 52 carbamates, thiocarbamates, and phenylureas

We have developed a fully automated LC/MS method development and quantification protocol targeting 52 carbamtes, thiocarbamates, and phenylureas. This is a simple LC/MS method with direct injection; no post-column derivatization was required. The method utilized the Waters Alliance HT Chromatography System and the Waters ZQ 2000 mass spectrometer. System control and data processing was by MassLynx 4.0 with QuanLynx Application Manager. Analyte separation was accomplished by Waters Symmetry reversed-phase C8 column. An ammonium acetate water/acetonitrile binary gradient was used for the separation. The MS multichannel ability minimized the LC method development time with less demand on chromatographic peak resolution. Quantification results were obtained for 46 analytes out of the 52 targets. The coefficients of determination ranged from 0.886 to 0.999. The automated LC/MS protocol has sufficient sensitivity to accommodate the current EPA requirements. The limits of detection (3 times the S/N) ranged from 0.091 to 19.3 ng/mL with 50-microL injection. The highly selective MS detector enabled the matrix effect to be minimized. This method was applied to local drinking water and wastewater samples. Each matrix was spiked with the 52 target analytes at 2 and 20 ng/mL. The recoveries were within the EPA acceptance range.     

Nanowires and nanoribbons formed by methylphosphonic acid

The production and physical properties of nanowires and nanoribbons formed by methylphosphonic acid (MPA)--CH3PO(OH)2--were investigated. These structures are formed on an aluminum coated substrate when immersed in an ethanolic solution of MPA for several days. A careful investigation of the growth conditions resulted in a narrow window of solution concentrations and temperatures for the successful development of nanowires and nanoribbons. Several different techniques were employed to characterize these nanostructures: (1) Photoluminescence experiments showed a strong emission at 2.3 eV (green), which is visible to the naked eye; (2) X-ray diffraction experiments indicated a significant cristalinity, in agreement with atomic force microscopy (AFM) and transmission electron microscopy (TEM) morphology images, which show organized nano-scale wires and ribbons, (furthermore, AFM-Phase and TEM images also suggest that nanoribbons are formed by well-aligned nanowires); (3) Conductive-AFM experiments revealed an intermediary conductivity for these structures (10(-1)/Ohm x m), which is similar to some intrinsic semiconductors and; (4) finally, Infrared, Raman, and X-Ray Photoelectron Spectroscopies produced information about the contents, structure, and composition of both wires and ribbons.     

Rapid screening of aqueous chemical warfare agent degradation products: ambient pressure ion mobility mass spectrometry

The use of electrospray ionization ambient pressure ion mobility spectrometry with an orthogonal reflector time-of-flight mass spectrometer to analyze chemical warfare (CW) degradation products from aqueous environmental samples has been demonstrated. Certified reference materials of analytical standards for the detection of Schedule 1, 2, or 3 toxic chemicals or their precursors as defined by the chemical warfare convention treaty verification were used in this study. A combination of six G/V-type nerve and four S-type vesicant related CW agent degradation products were separated with baseline resolution by this instrumental technique. Analytical figures of merit for each CW degradation product were determined. In some cases, reduced mobility constants (K0) have been reported for the first time. linear response ranges for the selected CW degradation products were found to be generally approximately 2 orders of magnitude, where the overall dynamic response ranges were found to extend to 4 orders of magnitude. Limits of detection for five of the nine chemical products tested were found to be less than 1 ppm. To demonstrate the potential of this instrumental method with complex mixtures, four CW degradation products were separated and detected from a spiked Palouse River water sample in less than 1 min. Finally, a homologous series of n-alkylamines were used as baseline reference standards, producing a mobility/mass trend line to which the CW degradation products could be compared. Comparison of these products in this manner is expected to reduce the number of false positive/negative responses.     

Porous graphitic carbon as stationary phase for LC-ICPMS separation of arsenic compounds in water

A new liquid chromatographic separation method was developed for the speciation of the four main arsenic compounds present in water. Arsenite (As(III)), dimethylarsinic acid (DMA), monomethylarsonic acid (MMA) and arsenate (As(V)) were separated on a recently introduced stationary phase: porous graphitic carbon (PGC). The separation was first obtained under formic acid gradient conditions, but an adsorption phenomenon of As(V) on PGC was observed. To overcome this problem, As(V) was backflushed, and an efficient separation of the four solutes was achieved within 10 min. Extremely low detection limits (ranging from 10 to 70 ng x L(-1)) were obtained by coupling LC with an ICPMS. The method was successfully applied to different spiked mineral waters and a naturally arsenic-containing freshwater.     

An analytical method for trifluoroacetic Acid in water and air samples using headspace gas chromatographic determination of the methyl ester

An analytical method has been developed for the determination of trace levels of trifluoroacetic acid (TFA), an atmospheric breakdown product of several of the hydrofluorocarbon (HFC) and hydrochlorofluorocarbon (HCFC) replacements for the chlorofluorocarbon (CFC) refrigerants, in water and air. TFA is derivatized to the volatile methyl trifluoroacetate (MTFA) and determined by automated headspace gas chromatography (HSGC) with electron-capture detection or manual HSGC using GC/MS in the selected ion monitoring (SIM) mode. The method is based on the reaction of an aqueous sample containing TFA with dimethyl sulfate (DMS) in concentrated sulfuric acid in a sealed headspace vial under conditions favoring distribution of MTFA to the vapor phase. Water samples are prepared by evaporative concentration, during which TFA is retained as the anion, followed by extraction with diethyl ether of the acidified sample and then back-extraction of TFA (as the anion) in aqueous bicarbonate solution. The extraction step is required for samples with a relatively high background of other salts and organic materials. Air samples are collected in sodium bicarbonate-glycerin-coated glass denuder tubes and prepared by rinsing the denuder contents with water to form an aqueous sample for derivatization and analysis. Recoveries of TFA from spiked water, with and without evaporative concentration, and from spiked air were quantitative, with estimated detection limits of 10 ng/mL (unconcentrated) and 25 pg/mL (concentrated 250 mL:1 mL) for water and 1 ng/m(3) (72 h at 5 L/min) for air. Several environmental air, fogwater, rainwater, and surface water samples were successfully analyzed; many showed the presence of TFA.