吉安散装人抗冰战雪保平安——江西吉安散办干部职工铲除冰保畅通纪实

春节前后,吉安市遭遇到罕见的冰冻雨雪灾害天气,连续出现了低温、阴雨和雨夹雪,成为全省灾情最严重地区之一.特别是1月25日以后,出现了持续大范围的雨雪冰冻天气.冰冻损坏了市区的电网,压垮了树枝,封锁了道路和桥梁.     

欧文斯科宁专访

欧文斯科宁公司(以下简称OC)创建66年来一直致力于开发玻璃纤维的新用途,是建筑材料和复合材料行业的领先创新者和制造商,OC进入亚太市场也已超过30年,长久以来他们专注于推广复合材料的应用领域以及扩大其供应基地.最近,欧文斯科宁在印度扩充了生产能力,并在上海设立了技术中心.至今为止,欧文斯科宁在亚太区已有超过1800名员工,从事建筑材料和复合材料的生产,销售和研发工作.     

2010～2011年世界塑料工业进展

收集了2010年7月～2011年6月世界塑料工业的相关资料,介绍了2010～2011年世界塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚氯乙烯、聚苯乙烯、ABS树脂),工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚),特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮),通用热固性树脂(酚醛、不饱和聚酯树脂、环氧树脂、聚氨酯)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍。     

花粉症诱因探究

花粉症又称季节性鼻炎或枯草热,是敏感个体对花粉的一种超敏反应.在美国,每一百个人当中就有两个以上的人患花粉症;现在日本有1300万人饱受花粉症折磨,超过总人口的10%[1].我国的发病率为0.5%～1%,高发区达到5%,虽没有上述一些国家那么严重,受害者亦相当可观.全世界花粉症发病人数到1999年就已有5000多万[2],可见花粉症患者是一个绝不可轻视的群体.图1显示了花粉过敏症的发病机制.     

酿酒酵母细胞表达异源萜类化合物的研究进展

萜类化合物具有可观的经济价值,但是目前的生产过程复杂、产量低。酿酒酵母甲羟戊酸途径为萜类化合物的合成提供直接前体,因此酿酒酵母细胞具有合成异源萜类化合物的天然优势。对酿酒酵母甲羟戊酸途径的清晰认识是对其进行有效利用的基础,本文从代谢途径、关键酶的特点和全局调控机制3个方面对该途径进行了介绍。从代谢途径的构建和优化、模块与底盘细胞的适配、模块构建及组装方式的角度概述了酿酒酵母细胞异源合成单萜、倍半烯萜、二萜、三萜类化合物的研究进展。指出实现酿酒酵母高效合成萜类化合物所需要解决的基础问题是对酿酒酵母甲羟戊酸途径进行更为全面了解和对萜类化合物的天然代谢途径进行明确解析;另外,合成生物学的进一步发展也将为此提供应用基础。     

喷涂前处理污染源的分析及其处理措施

随着我国国民经济的快速发展和国家"节能减排"重点项目的深入开展,各种污染源的分析及其处理措施的研究备受关注.本文在充分研究若干家电企业的钢铁喷涂制件的前处理工艺(如:预脱脂、脱脂、清洗、表调、磷化等)的基础上,分析喷涂前处理过程中的污染源,研究污染源的处理措施.     

回转窑耐火砖的砌筑及使用

我公司回转窑规格为Φ4.0m×60m.窑内使用的耐火砖为镁铬砖、隔热尖晶石、蓝晶石和黏土砖以及硅莫砖.镁铬砖规格为(81×90×150×200)mm,其它耐火砖规格皆为(81×90×200×200)mm.尽管每个品种的砖品质相同,但由于在镶砌和使用过程中方法不同,寿命有长有短.通过多年实践,现总结如下.     

硅酸钠缓蚀剂的研究现状与展望

硅酸盐资源丰富,无毒,价廉,不繁殖细菌,是一种对环境友好的缓蚀剂.近年来研究的以硅酸盐为主的缓蚀剂复合配方,大大提高了硅酸盐缓蚀剂的应用范围.目前,开发缓蚀剂复合配方已成为一种发展趋势.本文综述了硅酸钠缓蚀剂的应用现状,并对其发展作了展望.     

论啤酒瓶质量与啤酒灌装的协调和统一

为了使啤酒瓶质量与啤酒灌装质量协调统一,探讨了啤酒瓶外形设计、剩余空间和瓶壁厚度与瓶子强度和灌装质量的关系,提出啤酒瓶企业定点向啤酒企业供瓶,两企业协作互动,了解相关的技术、设备性能和工艺流程,以利同步发展.     

化妆品行业如何应对REACH法规

2006年12月7日～2006年12月8日化妆品化学家年会在美国纽约举行,该年会为化学品供应商提供了参与REACH法规的机会.REACH法规的实施引起了业界的广泛关注,来自世界各地的著名化学品及化妆品公司对REACH法规的实施所带来的一些问题,以及新原料、新技术进行了交流.会议主要对就REACH法规、制造及规模化和神经美容品等方面展开了研讨.     

Oxidation of acylglycerols and phosphoglycerides by soybean lipoxygenase

Lipoxygenase (EC 1.13.11.12) catalyzes the incorporation of oxygen into polyunsaturated fatty acids, resulting in the formation of their corresponding hydroperoxides. The ability of a commercial preparation of soybean (Glycine max L. Merr.) lipoxygenase to catalyze the oxidation of acylglycerols and phosphoglycerides was investigated. The oxidation rate of trilinolein increased nearly 100% when 5 mM deoxycholate was added to the reaction medium. With further increases in the concentration of deoxycholate, the oxidation rate decreased slightly. The pH profile of trilinolein oxidation was bell-shaped. The rate of oxidation was maximal at pH 8, and it decreased to near zero at pH 5 and pH 11. Even under optimal conditions, the rate of trilinolein oxidation was only 3% of that of linoleic acid, and analysis of time course data showed that, at most, 15% of available linoleate was oxidized. In contrast to the slow rate of trilinolein oxidation, tested phosphoglycerides and diacylglycerols were oxidized at moderate rates. The rate of phosphoglyceride oxidation depended upon the structure of the polar head group and varied between 7–28% of the rate of linoleic acid oxidation. Diacylglycerols reacted at a rate that was 40% of that of linoleic acid. Analysis of the time course of 1,3-dilinolein oxidation showed that as much as 67% of the available linoleate could be converted to the corresponding hydroperoxide. Analyses by high-performance liquid chromatography revealed that more than 20% of the 1,3-dilinolein was converted to unidentified products that are not hydroperoxides.     

Trapping the western pine beetle at and near a source of synthetic attractive pheromone Effects of trap size and position

Western pine beetles were caught on unbaited sticky traps placed near a source ofexo-brevicomin, frontalin, and myrcene. Size of trap, distance and direction from the source of attractant, and height from the ground were varied. Significant differences in trap catch were observed in relation to each of the variables. Traps close to the source of attractant caught more beetles than traps farther from the source. Traps downwind of the source of attractant caught more beetles than did upwind traps. More males than females were trapped close to the source of attractant.Based in part on a thesis submitted by the senior author to the University of California, Berkeley, California, in partial fulfillment of the requirements for the degree Master of Science in entomology, December 1976. These studies were supported by the U.S. Forest Service and in part by the Rockefeller Foundation and a joint grant (NSF GB-34718/BMS 75-04223) from the U.S. National Science Foundation and the U.S. Environmental Protection Agency to the University of California. The findings, opinions, and recommendations are not necessarily those of the University of California or the funding agencies.Trade names and commercial enterprises or products are mentioned solely for information and do not constitute endorsement by the U.S. Department of Agriculture or University of California.     

Breakage patterns of agglomerates

The experimental information available in the literature regarding the patterns of breakage of agglomerate materials is scarce, particularly in dynamic loading. The primary objective of this paper is to present our findings on the breakage patterns of the agglomerates and the interparticle bond. A high-speed digital video imaging technique is used here to gain an insight into the impact behaviour of individual agglomerates against a target plate. Several breakage patterns are observed. Agglomerates may suffer localised damage only, with the disintegration of the damaged zone into very fine debris, or localised damage combined with fracture. The frequency of occurrence of these patterns depends on the impact velocity and agglomerate structure. The pattern of breakage affects significantly the size distribution of the impact product. An investigation of the breakage of individual interparticle bonds is also presented. Two forms of failure are observed, internal (cohesive) and interfacial (adhesive) failure. The morphology of the fractured surface depends greatly on the type of breakage. Internal breakage shows irregular surfaces due to crack jumping, whereas interfacial failure produces clean, smooth fracture surfaces. These observations should provide the necessary foundation for the development of a fundamental model of agglomerate breakage.     

Distribution of birch (Betula SPP.), willow (Salix SPP.), and poplar (Populus SPP.) secondary metabolites and their potential role as chemical defense against herbivores

Isoprenoids and phenolics, major metabolites of important browse species, are reviewed in regard to concentrations, distribution within tissues, and between species. Seasonal variation of specific substances and changes with age of the plant are also considered. The distribution of substances may affect food selection and feeding behavior of animals. Wild mammalian herbivores tend to avoid plant parts rich in these substances, in spite of high nutritional content of the plant tissue. Possible mechanisms for defense by plants against depredation by mammalian herbivores are discussed within the framework of the plants' biochemistry.     

Charakterisierung von Suspensionen nanoskaliger Partikel mittels Ultraschallspektroskopie und elektroakustischer Methoden

Technical control over dispersions with particles in the nanometer size realm should bring about a boost in innovations for some parts of industry. Requirements for the development of these new products is the accurate characterization of the various materials systems. A characterization should always include a determination of the particle size distribution, since it is coupled to the specific effects of these systems. Ultrasound measurement techniques and electroacoustics are two if the available techniques that allow determination of the size distribution and zeta potential of particles with dimensions up to 10 nanometers. A further fundamental advantage of the method is the possibility of carrying out measurements in high‐concentration materials systems. This report describes ultrasound spectroscopy for the measurement of fine‐ and very‐fine‐dispersion particles, and the known theoretical concepts for the interpretation of spectra. In addition, experiences in the use of currently available measurement techniques are presented.     

Mechanical Means of Enhancing Drying Rates: Effect on Drying Kinetics and Quality

The effect of various pretreatments on drying kinetics as well as quality parameters of selected vegetables and fruits was studied experimentally in a convective dryer. The pretreatments tested include application of pinholes and drilled holes of different diameters and densities, blanching and freezing. Potato, cassava, dragon fruit and red chilli were used as the sample drying materials. As expected, increase of the diameter and density of the holes under fixed drying conditions increased the drying rate. Samples with drilled holes showed better drying performance than those with pinholes. The improvement of the drying rate was found to be dependent on the physical properties and the initial moisture content of the material. Results show that the drying performance of the products that possess a skin of low moisture diffusivity, such as chilli, can be improved significantly by blanching and making perforations in the skin. Overall changes of color and volume shrinkage during drying of the samples with and without holes were similar. The effect of different modes of heat input, such as convection, conduction and radiation, on the drying performance of the treated samples was also experimentally investigated. On-off type controllers were used to regulate the power of the heaters and maintain the product temperature within a range of pre-set values. Convection combined with radiation displayed the highest drying rate.     

Inorganic/organic nanocomposite coatings: The next step in coating performance

Inorganic/organic hybrid materials have considerable promise and are beginning to become a major area of research for many coating usages, including abrasion and corrosion resistance. Our primary approach is to prepare the inorganic phase in situ within the film formation process of the organic phase. The inorganic phase is introduced via sol-gel chemistry into a thermosetting organic phase. By this method, the size, periodicity, spatial positioning, and density of the inorganic phase can be controlled. An important aspect of the inorganic/organic hybrid materials is the coupling agent. The initial task of the coupling agent is to provide uniform mixing of the oligomeric organic phase with the sol-gel precursors, which are otherwise immiscible. UV-curable inorganic/organic hybrid systems have the advantages of a rapid cure and the ability to be used on heat sensitive substrates such as molded plastics. Also, it is possible to have better control of the growth of the inorganic phase using UV curing. It is our ultimate goal to completely separate the curing of inorganic and organic phases to gain complete control over the morphology, and hence optimization of “all” the coating properties. Thus far, it has been found that concomitant UV curing of the inorganic and organic phases using titanium sol-gel precursors afforded nanocomposite coatings which completely block the substrate from UV light while maintaining a transparent to visible light. Also, it has been found that the morphology of the inorganic phase is highly dependent on the concentration and reactivity of the coupling agent. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.     

燃煤烟气中单质汞吸附与氧化机理研究进展

燃煤电厂汞排放控制是当前的研究热点,实现燃煤烟气中汞的脱除涉及两个非常重要的过程：吸附与氧化。本文概述了汞在吸附剂表面吸附的相关理论和单质汞的催化氧化机理,结合碳基和非碳基吸附剂相关吸附特性的研究现状,对汞的吸附机理进行了讨论,回顾了SCR、碳基、以及金属和金属氧化物三种常见催化剂对单质汞的催化氧化性能并总结了其可能存在的机理。指出吸附剂表面活性位是决定其对汞吸附效果的关键因素,异相反应是单质汞氧化的重要途径,吸附和氧化是相辅相成的,不同催化剂不同气氛下氧化机理不同。并提出通过氯化物等物质改性能够提高吸附剂的吸附效果,深入研究汞的异相反应机理并开发经济有效的汞脱除方法是今后的研究方向。     

Effect of Dose and Administration Period of Seed Cake of Genetically Modified and Non-Modified Flax on Selected Antioxidative Activities in Rats

Flaxseed cake containing antioxidants is a valuable dietary component. Its nutritional effect may be diminished by the presence of anti-nutrients. The work was aimed at determining the effect of different contents of flaxseed cake in diets and their administration period on the development of rats and selected parameters of their health status. Diets with 15% and 30% addition of genetically modified (GM) flax seed cake with enhanced synthesis of polyphenols, as well as Linola non-GM flax were administered in short-term (33 days) and long-term (90 days) experiments. The 30% addition of flaxseed cake reduced digestibility of dietary nutrients, GM flaxseed cake lowered body weight gains. The relative weight of selected organs, hematological blood markers and serum activities of aspartate and alanine aminotransferases (AST, ALT) were not affected. Flaxseed cake consumption reduced serum concentration of albumins and increased globulins. Administration of 30% flaxseed cake improved plasma total antioxidant status and 30% GM flaxseed cake lowered liver thiobarbituric acid reactive substances. The activities of superoxide dismutase in erythrocytes, glutathione peroxidase in plasma and the liver concentration of 8-oxo-2′-deoxyguanosine were not changed. Most morphometric parameters of the small intestine did not differ between feeding groups. The administration of diets with 30% addition of flaxseed cake for 90 days improved the antioxidant status in rats.     

Emerging role of nanobiocatalysts in hydrolysis of lignocellulosic biomass leading to sustainable bioethanol production

Catalytic conversion (hydrolysis) of carbohydrate polymers present in the lignocellulosic biomass into fermentable sugars is a key step in the production of bioethanol. Although, acid and enzymatic catalysts are conventionally used for the catalysis of various lignocellulosic biomass, recently application of immobilized enzymes (biocatalysts) have been considered as the most promising approach. Immobilization of different biocatalysts such as cellulase, β-glucosidase, cellobiose, xylanase, laccase, etc. on support materials including nanomaterials to form nanobiocatalyst increases catalytic efficacy and stability of enzymes. Moreover, immobilization of biocatalysts on magnetic nanoparticles (magnetic nanobiocatalysts) facilitates easy recovery and reuse of biocatalysts. Therefore, utilization of nanobiocatalysts for catalysis of lignocellulosic biomass is helpful for the development of cost-effective and ecofriendly approach. In this review, we have discussed various conventional methods of hydrolysis and their limitations. Special emphasis has been made on nanobiocatalysts used for hydrolysis of lignocellulosic biomass. Moreover, the other most important aspects, like nanofiltration of biomass, conversion of lignocellulose to nanocellulose, and toxicological issues associated with application of nanomaterials are also discussed.