Synthesis of B–C–N nanotubes by means of gas arc discharge with a rotating anode

B–C–N nanotubes were synthesized by plasma rotating electrode process (PREP) and examined by scanning electron microscope (SEM) and X-ray diffraction (XRD). Compared with results at 0 rpm of the anode, the number of B–C–N nanotubes was increased by rotating the anode. In addition, peak intensity ratio of h-(BN)_0.26C_0.74 to graphite was increased with rotation of the anode and/or the increase of metal concentration. That indicates the yield of B–C–N nanotubes was increased. These results could be explained by an increase of plasma temperature and a swirl in the plasma by rotation of the anode that promote the mixing to aid chemical reactions between evaporated species and atomic nitrogen.     

Preparation and properties of antibacterial TiO2@C/Ag core–shell composite

Abstract

An environment-friendly hydrothermal method was used to prepare TiO₂@C core–shell composite using TiO₂ as core and sucrose as carbon source. TiO₂@C served as a support for the immobilization of Ag by impregnation in silver nitrate aqueous solution. The chemical structures and morphologies of TiO₂@C and TiO₂@C/Ag composite were characterized by x-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, energy dispersive x-ray spectroscopy and Brunauer–Emmett–Teller (BET) analysis. The antibacterial properties of the TiO₂@C/Ag core–shell composite against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were examined by the viable cell counting method. The results indicate that silver supported on the surface of TiO₂@C shows excellent antibacterial activity.     

Molecular dynamics simulations of the interactions between β-cyclodextrin derivatives and single-walled carbon nanotubes

Since cyclodextrins (CDs) were discovered to be an excellent reagent to disperse carbon nanotubes (CNTs), they were used for the construction of CD/CNT based electrodes. Therefore, it is crucial to investigate the interactions between CDs and CNTs for their applications. Herein, β-cyclodextrin (β-CD) and their four derivatives, 2-O-(2-hydroxypropyl)-β-cyclodextrin (2-HP-β-CD), 6-O-(2-hydroxypropyl)-β-cyclodextrin (6-HP-β-CD), 2-O-(2-hydroxybutyl)-β-cyclodextrin (2-HB-β-CD) and 6-O-(2-hydroxybutyl)-β-cyclodextrin (6-HB-β-CD), were employed to investigate the interactions with single-walled carbon nanotubes (SWNTs) both in anhydrous and aqueous conditions by molecular dynamics simulation. The results showed that the interactions between SWNTs and CDs were strongly influenced by the structures of CDs such as substituted group and position. The attractive interactions between SWNTs and CDs monotonically increased with the radius of SWNT. Van der Waals attraction was the dominating force for CDs wrapped onto the surface of the nanotube ropes. Therefore, the results could provide a fundament for the choice of CDs in their further applications.     

Development of a Sn–Ag–Cu solder reinforced with Ni-coated carbon nanotubes

In this study, Ni-coated carbon nanotubes (Ni-CNTs) were incorporated into the 95.8Sn-3.5Ag-0.7Cu solder alloy using the powder metallurgy route. Up to 0.3 wt% of Ni-CNTs were successfully incorporated. The effects of Ni-CNTs on the physical, thermal and mechanical properties of Sn–Ag–Cu solder alloy were investigated. With the addition of increasing weight percentages of Ni-CNTs, the composite solders showed a corresponding decrease in density values and improved wetting properties. The thermomechanical property results showed an improvement in thermal stability for the composite solders. Mechanical characterization revealed an improvement in ultimate tensile strength (up to 12%) and 0.2% yield strength (up to 8%) with the addition of 0.05 wt% Ni-CNTs in the solder.     

Preparation and characterization of magnetic carbon nanomaterials bearing APTS–silica on their surface

The formation of metal-encapsulated carbon nanomaterials by using metallic catalysts (iron, cobalt, and nickel) has been studied. Moreover, these materials were coated with silica surface modified by (3-Aminopropyl)-trimethoxysilane (APTS). Each intermediate structure was confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The surface morphology of silica-coated carbon nanomaterials was analyzed by scanning electron microscopy (SEM). The modified, APTS–silica surface was additionally characterized by Fourier transform infrared spectroscopy (FT-IR), elemental (EA), and thermogravimetric analysis (TGA).     

Interaction between gallium atoms and the inner walls of single-walled carbon nanotubes

The interaction between individual Ga atoms and the inner walls of both (8, 8) and (12, 0) carbon nanotubes (CNTs) is investigated using first principles calculations based on the density functional theory. We find that a single Ga atom favorably adsorbs at the center site (H) of a hexagonal ring and diffuses on the inner wall of a perfect CNT with very low energy barriers. In the case of CNTs containing monovacancies, a single Ga?atom can heal the topological structure of a monovacancy in a (8, 8) CNT but not in a (12, 0) CNT. Our calculations show that the Ga atom adsorbed at the monovacancy in the CNT can alter the electronic structure of the tube significantly.     

Cytotoxicity of single-walled carbon nanotubes suspended in various surfactants

The cytotoxicity of single-walled carbon nanotubes (SWCNTs) suspended in various surfactants was investigated by phase contrast light microscopy characterization in combination with an absorbance spectroscopy cytotoxicity analysis. Our data indicate that individual SWCNTs suspended in the surfactants, sodium dodecyl sulfate (SDS) and sodium dodecylbenzene sulfonate (SDBS), were toxic to 1321N1 human astrocytoma cells due to the toxicity of SDS and SDBS on the nanotube surfaces. This toxicity was observed when cells were exposed to an SDS or SDBS solution having a concentration as low as 0.05?mg?ml(-1) for 30?min. The proliferation and viability of the cells were not affected by SWCNTs alone or by conjugates of SWCNTs with various concentrations of sodium cholate (SC) or single-stranded DNA. The cells proliferated similarly to untreated cells when surrounded by SWCNTs as they grow, which indicated that the nanotubes did not affect cells adversely. The cytotoxicity of the nanotube-surfactant conjugates was controlled in these experiments by the toxicity of the surfactants. Consequently, when evaluating a surfactant to be used for the dispersion of nanoscale materials in applications such as nanoscale electronics or non-viral biomolecular transporters, the cytotoxicity needs to be evaluated. The methodology proposed in this study can be used to investigate the cytotoxicity of other nanoscale materials suspended in a variety?of?surfactants.     

Preparation of water dispersible,fluorescent Ag–PAA–PVP hybrid nanogels and their optical properties

A simple method of synthesizing hybrid silver–polyacrylic acid–poly(N-vinylpyrrolidone) (Ag–PAA–PVP) nanogels was demonstrated through in situ reducing Ag⁺ inside PAA–PVP nanogels, which were formed by polymerization of acrylic acid in the PVP solution. Due to the ion exchange between Ag⁺ and acid protons of PAA, stable Ag⁺ clusters were formed inside the PAA–PVP nanogels, and hybrid nanogels were obtained by reducing Ag⁺ by ascorbic acid. Transmission electronic microscopic (TEM) images clearly showed the existence of silver nanoparticles inside the Ag–PAA–PVP nanogels. These hybrid nanogels showed typical surface plasma resonance absorption peak around 420 nm, and the size of the silver nanoparticles inside the Ag–PAA–PVP nanogels could be controlled from 9.5 ± 1.6 nm to 1.9 ± 0.4 nm by increasing the feeding amount of Ag⁺. In addition, these hybrid nanogels showed photoluminescent properties in fluorescent spectra. Considering the pH sensitive property of these hybrid nanogels, they will have potential application in drug delivery and biomedical imaging systems.     

Chirality-controlled synthesis of single-walled carbon nanotubes—From mechanistic studies toward experimental realization

Carbon nanotubes (CNTs) have the recorded mechanical strength, exceptionally high thermal stability close to that of diamond, and an extremely high carrier mobility, which is two orders of magnitude higher than that of silicon. A CNT can be conducting, medium or small band gap semiconducting, depending on the exact atomic configuration and the tube diameter. To realize its applications in high-end electronics and even replacing silicon in semiconductor industry, the synthesis of high-purity single-walled CNTs (SWCNTs) with unique structure (chirality) at a relatively low price, is essential. Direct synthesis of SWCNTs with the desired chirality has been one of the great challenges for more than 20?years and it is only very recently that direct synthesis of SWCNTs with purity >90% was achieved. In this review, we have summarized previous researches and state-of-the-art chirality-selective SWCNT synthesis, including experimental and theoretical studies dealing with the mechanism of SWCNT growth, potential routes toward chirality-selection during growth, and recent experimental techniques targeted toward the selective growth of high-purity SWCNTs.     

Synthesis of carbon and carbon–nitrogen nanotubes using green precursor: jatropha-derived biodiesel

The jatropha-derived biodiesel, a green precursor was found to be a new and promising precursor for the synthesis of carbon nanotubes (CNTs) and carbon–nitrogen (C–N) nanotubes. The CNTs and C–N nanotubes have been synthesised by spray pyrolysis of biodiesel with ferrocene and ferrocene–acetonitrile, respectively, at elevated temperature under an argon atmosphere. The typical length and diameter of as-grown CNTs are 20?µm and 20–50?nm, respectively. The C–N nanotubes are found in bundles with effective length of ～30?µm and diameter ranging between 30 and 60?nm with bamboo-shaped morphology. The as-grown CNTs and C–N nanotubes were characterised through scanning and transmission electron microscopes, X-ray photoelectron, Raman and Fourier transform infrared spectroscopic techniques. These investigations revealed that the nanotubes synthesised by jatropha-derived biodiesel are clean from carbonaceous impurities and the bamboo compartment formations in C–N nanotubes are due to nitrogen incorporation. The nitrogen concentration in C–N nanotubes decreases with the increase in synthesis temperature.     

Growth of Ag nanoparticles using plasma-modified multi-walled carbon nanotubes

This study presents a novel method for preparing multi-walled carbon nanotubes (MWNTs) grafted with a poly(2-hydroxyethyl methacrylate) (HEMA)-silver complex (CNTs-HEMA-Ag complex) through plasma-induced grafting polymerization. The characteristics of the MWNTs after being grafted with HEMA polymer are monitored by Fourier transform infrared (FT-IR) spectroscopy. The chelating groups in the HEMA polymer grafted on the surface of the CNTs-HEMA are the coordination sites for chelating silver ions, and are further used as nanotemplates for the growing of Ag nanoparticles (quantum dots). Transmission electron microscopy (TEM) reveals that the particle size of Ag nanoparticles on the CNT surfaces increases with the Ag(+) chelating concentration, reaction time, and reaction temperature. Moreover, the crystalline phase of Ag nanoparticles is identified by using x-ray diffraction (XRD). In addition, high-resolution x-ray photoelectron spectroscopy (XPS) is used to characterize the functional groups on the surface of the MWNTs after chemical modification through plasma treatment; it demonstrates that the growing amount of the Ag nanoparticles on the nanotubes increases with the Ag(+) chelating concentration due to the blocking effect of the Ag particles forming on the MWNTs.     

Repair and stabilization in confined nanoscale systems — inorganic nanowires within single-walled carbon nanotubes

Repair is ubiquitous in biological systems, but rare in the inorganic world. We show that inorganic nanoscale systems can however possess remarkable repair and reconfiguring capabilities when subjected to extreme confinement. Confined crystallization inside single-walled carbon nanotube (SWCNT) templates is known to produce the narrowest inorganic nanowires, but little is known about the potential for repair of such nanowires once crystallized, and what can drive it. Here inorganic nanowires encapsulated within SWCNTs were seen by high-resolution transmission electron microscopy to adjust to changes in their nanotube template through atomic rearrangement at room temperature. These observations highlight nanowire repair processes, supported by theoretical modeling, that are consistent with atomic migration at fractured, ionic ends of the nanowires encouraged by long-range force fields, as well as release-blocking mechanisms where nanowire atoms bind to nanotube walls to stabilize the ruptured nanotube and allow the nanowire to reform. Such principles can inform the design of nanoscale systems with enhanced resilience.      

Electroless preparation and characterization of Ni–B nanoparticles supported on multi-walled carbon nanotubes and their catalytic activity towards hydrogenation of styrene

Nickel–boron (Ni–B) nanoparticles supported on multi-walled carbon nanotubes (MWCNTs) were successfully synthesized through an electroless deposition process using the plating bath with sodium borohydride as a reducing agent. The structural and morphological analyses using field-emission scanning electron microscopy, X-ray diffractometry and high-resolution transmission electron microscopy have shown that the Ni–B nanoparticles deposited on the sidewalls of MWCNTs are fine spheres comprised of amorphous structure with the morphologically unique fine-structure like flowers, and homogenously dispersed with a narrow particle size distribution centered at around 60 nm diameter. The catalytic activity of MWCNT/Ni–B nanoparticles was evaluated with respect to hydrogenation of styrene. The hydrogenation catalyzed by MWCNT-supported Ni–B nanoparticles has been found to make styrene selectively converted into ethylbenzene. The highest conversion reaches 99.8% under proper reaction conditions, which demonstrates the high catalytic activity of MWCNT/Ni–B nanoparticles.     

A new antibacterial titanium–copper sintered alloy: Preparation and antibacterial property

Copper element was added in pure titanium by a powder metallurgy to produce a new antibacterial titanium–copper alloy (Ti–Cu alloy). This paper reported the very early stage results, emphasizing on the preparation, mechanical property and antibacterial activity. The phase constitution was analyzed by XRD and the microstructure was observed under SEM equipped with EDS. The hardness, the compressive strength and the corrosion resistance of Ti–Cu alloy were tested in comparison with cp-Ti. The antibacterial property of the Ti–Cu alloy was assessed by two methods: agar diffusion assay and plate-count method, in which Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) were used. XRD and SEM results showed that Ti₂Cu phase and Cu-rich phase were synthesized in the Ti–Cu sintered alloy, which significantly increases the hardness and the compressive strength compared with cp-Ti and slightly improves the corrosion resistance. No antibacterial activity was detected by the agar diffusion assay on the Ti–Cu alloy, but the plate-count results indicated that the Ti–Cu alloy exhibited strong antibacterial property against both bacteria even after three polishing treatments, which demonstrates strongly that the whole alloy is of antibacterial activity. The antibacterial mechanism was thought to be in associated with the Cu ion released from the Ti–Cu alloy.     

Selective growth of vertically aligned double- and single-walled carbon nanotubes on a substrate at 590 °C

Vertically aligned double-?and single-walled carbon nanotubes (DWNTs and SWNTs) were synthesized on a substrate at 590?°C by hot-filament chemical vapor deposition. An optimized combination of iron and aluminum layers as the catalyst resulted in iron particles ranging from 1-5?nm floating in an aluminum matrix after annealing. Selective synthesis of DWNTs and SWNTs from such particles was achieved by adjusting the dilution ratio of acetylene that was used as the source gas. The yield of DWNTs among all CNTs was as high as 81%, while that of SWNTs was almost 100%. The diameter distribution of DWNTs was narrow, with a standard deviation of about 12%.     

Effect of carbon nanotubes and their dispersion on electroless Ni–P under bump metallization for lead-free solder interconnection

Electroless Ni–P under bump metallization (UBM) has advantages of even surface, low cost and simplicity to deposit, but their mechanical strength, corrosion resistance and stability still face challenges under high soldering temperature. Incorporating carbon nanotubes (CNTs) into electroless Ni–P UBM might be expected to provide Ni–P–CNT composites with high mechanical strength and stability. Ni–P–CNT composite coatings as well as Ni–P coatings were fabricated by electroless plating process. In order to homogeneously disperse CNTs in composite coatings, acid pre-treatment and surfactant dispersant were introduced. During composite electroless plating, the ultrasonic agitation was also employed. In this study, scanning electronic microscopy (SEM) was used to observe the morphology and the CNTs were proved to be uniformly distributed in Ni–P–CNT coatings by SEM and atomic force microscopy. It was verified that the surface of the composite was quite smooth and continuous; CNTs are equably embedded in the matrix, which is advantageous for conductivity, mechanical strength and corrosion resistance. Shear tests were conducted to evaluate the effect of CNT reinforcement on the mechanical properties of joints, and the joints with CNT additions exhibited higher shear strength at different reflow cycles. Moreover, deposition mechanism of CNTs with Ni was analyzed and confirmed by transmission electron microscopy. Factors that affecting plating process was also discussed, and the optimum plating condition was suggested in this study.     

Collapse and stability of single- and multi-wall carbon nanotubes

The collapse and stability of carbon nanotubes (CNTs) have important implications for their synthesis and applications. While nanotube collapse has been observed experimentally, the conditions for the collapse, especially its dependence on tube structures, are not clear. We have studied the energetics of the collapse of single-?and multi-wall CNTs via atomistic simulations. The collapse is governed by the number of walls and the radius of the inner-most wall. The collapsed structure is energetically favored about a certain diameter, which is 4.12, 4.96 and 5.76?nm for single-, double-?and triple-wall CNTs, respectively. The CNT chirality also has a strong influence on the collapsed structure, leading to flat, warped and twisted CNTs, depending on the chiral angle.