共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
最近几年,汽车燃油管路系统中用的橡胶制品要求提高耐热性与耐燃油性,能满足这些性能要求的橡胶材料是氟橡胶。出于氟橡胶价格昂贵,与燃油接触的内层薄壁可以使用氟橡胶,而它的外层胶宜为常用的丁腈橡胶。为此,对氟橡胶与丁腈橡胶的硫化粘合进行了试验研究。试验结果是,要使氟橡胶与丁腈橡胶两者粘合:(i)丁腈橡胶部分要添加20份金属化合物(氢氧化钙);(ii)氟橡胶部分要把硫化促进剂(有机鏻盐)的用量增加到0.9份;(iii)宜采用与含有二乙氨基团的甲基丙烯酸酯共聚的丁腈橡胶。这样得到的氟橡胶与丁腈橡胶的硫化粘合,其粘接强度可达到橡胶层破坏的程度。其中采用以8.5wt%甲基丙烯酸乙酯共聚的丁腈橡胶显示最佳的粘合强度。另外,对氟橡胶与丁腈橡胶的共交联机理也进行一些探讨。 相似文献
4.
讨论了Viton氟橡胶与金属的粘合,阐述了配方设计、粘合剂选择、金属嵌件处理方法、二次硫化、模腔压力等因素对粘合质量的影响。分析了含氧化铅难粘胶料的粘结方法 相似文献
5.
6.
本文综述了A/B型氟橡胶双酚硫化系统的技术进展,阐述了各类硫化系统的特点及用途。介绍了A/B型氟橡胶与金属粘合的技术进展。 相似文献
7.
氟橡胶与黑色金属的热硫化粘合试验 总被引:2,自引:0,他引:2
试验研究了氟橡胶与黑色金属的热硫化粘合。考察了CHEMLOK CH607等5种粘合剂的粘合效果。试验结果表明,香港适树公司的512粘合剂与氟橡胶的粘合性能优良,并且具有防锈能力。 相似文献
8.
9.
10.
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
13.
14.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
15.
利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。 相似文献
16.
18.
The miscibility of various amorphous polybutadienes with mixed microstructures of 1,4 addition units (cis, 1,4 and trans 1,4) and 1,2 addition units have been investigated. The studies here involved optical transparency, differential scanning calorimetry, and small angle light scattering. It was found that a 90 percent (cis) 1, 4 addition polybutadiene was immiscible with high (91 percent) 1,2 addition polybutadiene. Reduction of the 1,2 content to 71 percent induced an upper critical solution temperature (UCST) with the cis 1,4 polymer. Polybutadienes with 50 percent and 10 percent 1,2 contents were miscible above the crystalline melting temperature of the cis 1,4 polybutadiene. Immiscibility of the 91 percent 1,2 addition polymer was also found with a 10 percent 1,2 polybutadiene. The latter polymer also exhibits an UCST with the 71 percent 1,2 polymer. The results are used to interpret the characteristics of blends of polybutadienes of varying microstructure. 相似文献
19.
以F类粉煤灰为例,详细介绍了测定粉煤灰中烧失量的步骤、计算数学模型、影响测量不确定度的因素以及各项测量不确定度分量评定,人员、设备、材料、方法、环境都是影响测量不确定的因素。 相似文献
20.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献