改进的无线Mesh网路由判据算法及其路由协议

为了改善802.11s无线Mesh网传输过程中因重传次数过大而造成的丢包问题,根据实际无线传输中的网络重传次数特性,提出一种基于最大重传次数的空中传播时间改进路由判据算法.同时为了缓解因单根节点造成的网络拥塞,提高实际场景中边缘节点的传输性能,并保证网络中所有节点使用无线信道资源的公平性,基于树的寻径机制从拓扑结构的角度,提出一种改进的多根节点的混合无线Mesh网路由协议(M-HWMP).理论及仿真结果表明,改进的路由判据算法及路由协议优化了无线Mesh网传输不同数据流时的吞吐量、时延特性,并在一定程度上避免了网络拥塞.     

一种树形拓扑的无线Mesh网络路由协议

研究和分析无线Mesh网络路由协议及其特点,提出无线Mesh网络路由协议设计原则。遵循这些原则,充分利用Mesh网络全相连的优点构建出树形逻辑拓扑结构,该拓扑结构能满足无线Mesh网络业务特点的要求。在该拓扑树基础上设计一种基于树形拓扑的无线Mesh网络路由协议(TTRP),该协议采用无开销的源地址学习方式构建路由相关表项,提高了TTRP路由协议的健壮性和网络的抗毁性。     

基于树形拓扑的无线Mesh网络路由协议研究

研究和分析了无线Mesh网络路由协议及其特点,提出了无线Mesh网络路由协议设计原则.遵循这些原则,充分利用Mesh网络全相连的优点构建出树形逻辑拓扑结构,该拓扑结构能满足无线Mesh网络业务特点的要求.在该拓扑树基础上设计了一种基于树形拓扑的无线Mesh网络路由协议(TTRP),该协议采用无开销的源地址学习方式构建路由相关表项,快速链路切换和路由重定向机制大大提高了TTRP路由协议的健壮性和网络的抗毁性.网络仿真结果表明了该路由协议的可行性.     

一种基于P2P技术的无线mesh网路由协议

无线Mesh网是一种新型的无线组网形式,网络中包含两类节点:组成无线mesh网骨干的mesh路由器和通过mesh路由器接入网络的mesh客户端.由于mesh路由器和mesh客户端在功能和性能上存在较大差异,使无线mesh网成为一种复杂的异构网络,现有的无线路由协议不能在这一网络结构上直接适用.针对无线mesh网的结构特点提出了一种大型无线mesh网络下的路由协议,采用基于P2P的分层结构实现网络节点信息的自动注册、快速查询和路由转发,同时网络具有较好的负载均衡和抗毁性能.仿真结果表明,与传统的分层路由协议相比,该方案可以得到更优的移动路由.     

无线Mesh网络中基于路由信息的拥塞控制策略研究

针对无线Mesh网络的网络特性,分析了无线Mesh网络的拥塞控制策略,对无线Mesh网络的拥塞程度进行分级,并提出了一种无线Mesh网络的拥塞控制算法——RICC算法.该算法主要通过移动节点不同的拥塞程度发送不同的拥塞通告消息,收到拥塞通告消息的移动节点动态地调整发送数据的速率以达到拥塞控制的目的,并通过仿真验证了该算法可提高无线Mesh网络性能.     

战术通信中异构Ad-hoc网络路由策略

针对战术通信中的网络异构性和节点群组移动性,在建立群组移动模型的基础上,采用簇头稳定分簇算法动态划分管理异构网络分层结构,提出基于链路状态的分层路由策略整合异构无线资源。该策略分为区内路由策略和区间路由策略,面向不同网络层次采用不同路由机制。OPNET仿真结果表明,该策略的分组成功接收率和平均端到端延时性能均优于分层AODV协议。     

多路径DSR和AODV路由协议性能研究

在支持移动节点和自组织网络的路由协议中,最典型的单径路由协议是DSR和AODV协议,对它们进行扩展分别得到相应的多径路由协议。通过仿真比较分析这2种多径路由协议在混合无线Mesh网络和移动AdHoc网络中的性能。结果显示,混合无线Mesh网络中的这2种多径路由协议具有分组传输率高、端到端的平均延时和路由开销小等优点。以DSR协议为基础扩展得到的多径路由协议,在高度动态的网络环境中,性能得到了改善,能广泛应用于移动性强的环境中。     

基于链路状态加权的无线Mesh网络路由协议

由于无线Mesh网络还没有统一标准,ad hoc中的路由算法并不能完全适合无线Mesh网络.在分析ad hoc中经典路由协议AODV的基础上,结合无线Mesh网络的特点,提出了一种新颖的、基于链路状态加权的路由协议.该协议利用节点的可用带宽、吞吐性能和缓冲队列的饱和度等计算路由每一跳的代价(即权重),选择从信源到信宿累计权重最小的路径作为路由.仿真结果表明,提出的路由协议在数据包转发率、平均端到端延迟和标准化路由负栽等性能上均优于AODV,是一种适合无线Mesh网络的路由协议.     

基于P2P的无线mesh网移动性管理研究

无线Mesh网是一种新型的无线组网技术,现有的无线移动管理协议还不能在这一网络结构上直接适用.在典型无线mesh网络分层结构模型上,对现有的几种无线网络移动管理协议进行了比较,并且针对无线mesh网的结构特点提出了一种大型无线mesh网络下的移动性管理方案,采用了基于P2P的分层结构实现网络移动定位信息的自动注册、自动管理和快速查询,同时网络具有较好的负载均衡和抗毁性能.仿真结果表明,与传统的分层移动管理协议相比,该方案可以得到更优化的移动路由.     

邻居认证的Mesh网络安全多路径路由协议

Mesh网络节点的移动性和数据传输的多跳性,使得路由协议的质量以及安全性成为衡量Mesh网络性能的关键因素,迫切需要一种能适应网络拓扑变化,高效、安全的路由协议。而目前针对Mesh网络的路由协议很少考虑到协议本身的安全性问题。提出了一种基于认证的节点分离安全多路径路由协议,在多路径的建立过程中加入了安全机制。分析表明,该路由算法在提供负载平衡、提高整体吞吐量、增加容错性的基础上能够很好地保证路由协议的安全性,而且多路径之间节点分离能够降低链路断开的概率,为数据传输提供更高的可靠性。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。