共查询到19条相似文献,搜索用时 281 毫秒
1.
无位置传感器的开关磁阻电机转子位置检测技术 总被引:7,自引:0,他引:7
转子位置检测是开关磁阻电机调速系统的重要环节,直接位置检测技术能够提供稳定的转子位置信号,但需要增加附加的机械结构,从而限制了开关磁阻电机的应用范围.目前,无位置传感器检测技术是开关磁阻电机研究领域的热点之一.全面介绍了国内外开关磁阻电机无位置传感器检测技术的研究现状,详细阐述了每一典型检测方法的原理,对其优缺点及适用范围进行了详细讨论与客观评述,并展望了其发展趋势.对新型无位置传感器检测技术的研究具有重要的参考价值. 相似文献
2.
3.
基于滑模观测器的单绕组多相无轴承电机无位置传感器控制 总被引:1,自引:0,他引:1
针对单绕组多相无轴承电机的特点,讨论了此类电机中悬浮平面电流对电机转子位置带来的扰动,建立了基于滑模观测器的检测模型和控制算法,实现了单绕组多相无轴承电机的无转子位置传感器运行。文中采用饱和函数代替开关函数,并设计了随转速变化的低通滤波器,取得了良好的观测效果。该方法克服了传统基于电机模型的无位置传感器控制方法对电机参数的依赖性,抑制了由无轴承电机悬浮平面耦合带来的固有扰动,提升了无轴承系统的鲁棒性。实验结果表明系统采用该观测器进行转子位置及速度观测后,具有较好的静、动态性能,验证了滑模观测器在单绕组多相无轴承驱动系统无位置传感器中应用的正确性和可行性。 相似文献
4.
5.
位置传感器会增加系统成本和测量噪声,且无法应用在一些恶劣环境。介绍了一种基于锁相环的永磁同步电动机无位置传感器控制方法。它利用检测得到的电压、电流,基于电机模型,计算出电机的转子位置偏差。采用锁相环结构对转子位置进行跟踪估算,得到较为满意的结果。理论分析和仿真结果都证明了该方法的正确性和可行性。 相似文献
6.
7.
8.
9.
10.
针对开关磁阻电机调速系统(SRD),提出了一种基于特殊位置检测的开关磁阻电机(SRM)转子位置估算方法。通过在线计算每相绕组实时磁链数据,检测出各相转子到达特殊位置的时刻。提出了基于特殊位置检测的电机转子位置重构策略,对电机瞬时转子位置进行还原。在提出的转子位置估算方法基础上,设计了SRD转速闭环控制系统。样机试验表明,提出的转子位置估算策略具有较高的检测精度与较宽的转速使用范围。基于关键位置检测的转速闭环无位置传感器控制策略具有较快的动态响应和较强的鲁棒性。 相似文献
11.
12.
13.
Takeshi Mizuno Hannes Bleuler Hiroaki Tanaka Hideki Hashimoto Fumio Harashima Hirochika Ueyama 《Electrical Engineering in Japan》1996,117(5):124-133
Active magnetic bearings (AMBs) are applied to turbomolecular pumps (TMPs) and milling spindles. However, their application areas are limited because they are costlier and require larger space than conventional mechanical bearings. Omitting position sensors from AMBs is one of the promising methods to solve such problems. An additional merit is that rotors can be shortened to have a higher critical speed by removing sensor targets from the rotor. The sensorless operation of AMBs has already been achieved in several instruments developed for experimental study. In this research, the sensorless magnetic suspension method is applied to a TMP manufactured as an industrial product, and it is demonstrated that sensorless AMBs can suspend a high-speed rotor. 相似文献
14.
High‐performance drive of synchronous motors such as a permanent magnet synchronous motor and a synchronous reluctance motor can be achieved by current vector control. In such drive systems, the armature current is controlled as a sinusoidal waveform based on rotor position information from a high‐resolution position sensor, and the current vector (d‐ and q‐axis currents) is suitably controlled by current feedback control. This paper proposes a current sensorless drive system with a low‐resolution position sensor in order to simplify the SM drive system. High‐performance current control is achieved in the proposed drive system, where the current sensors are eliminated and the simulated currents are used for current control. The low‐resolution position sensor is used instead of a conventional high‐resolution position sensor, and the higher position information is estimated. The steady‐state and transient characteristics are examined in several experiments with respect to the synchronous reluctance motor and the interior permanent magnet synchronous motor. It is confirmed that sinusoidal current drive, high‐performance current vector control, and speed control can be achieved by the proposed drive system. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(4): 34–43, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10072 相似文献
15.
低分辨率位置传感器永磁同步电机精确位置估计方法综述 总被引:1,自引:0,他引:1
伺服电机在装备制造、新能源和家电等领域有着广阔的应用,为得到高精度转子位置信息,通常采用旋转变压器或光电编码器等高分辨率位置码盘,但其价格普遍较高,增加了系统设计成本。而无传感器技术当前还很难全面满足工业及家电等领域的应用要求。低分辨率位置传感器永磁同步电机驱动技术是一种能够保证电机运行性能,同时能有效控制系统成本、提高系统可靠性的转子位置检测技术,受到国内外产业界的广泛关注。介绍开关型霍尔位置传感器的使用方法与工作原理,总结原始霍尔位置信息误差的来源与校正方法;重点讨论基于插值法、同步坐标系滤波器法和观测器法的转子位置/转速估算策略,从提高低分辨率位置传感器电机系统低速性能等方面分析和比较不同估算策略的原理、优缺点、适用范围及应用情况;最后,总结现有研究成果及有待解决的问题。 相似文献
16.
17.
18.
提出了一种应用于混合式步进电动机闭环驱动的内置位置传感器技术,利用气隙比磁导法分析了这种新型传感器的工作原理,在此基础上提出了利用步进电机磁阻变化实现连续转子位置的检测方法,为实现步进电动机自同步闭环控制奠定了基础。 相似文献
19.
针对无位置传感器永磁同步电机控制存在的转子位置与转速估计精度不高的问题,结合自适应算法设计了一种新型的自适应滑模观测器。滑模自身机制引起的系统抖振问题是影响电机转子位置与转速估计的最大因素。为了降抖减振,采用连续的sigmoid阈值函数代替sign符号函数;提出一个反电动势自适应估计环节代替传统的低通滤波器,提高反电动势估计精度;此外为了降低转子位置及其转速的估计误差,采用锁相环对其进行估计。最后,基于200W的PMSM搭建实验平台对上述改进算法进行验证。结果表明:电机转子位置与转速估计稳态误差分别为0.129 rad、79 r/min,能够实现无位置传感器PMSM高精度控制。 相似文献