Effect of a multiscale reinforcement by carbon fiber surface treatment with graphene oxide/carbon nanotubes on the mechanical properties of reinforced carbon/carbon composites

An effective carbon fiber/graphene oxide/carbon nanotubes (CF-GO-CNTs) multiscale reinforcement was prepared by co-grafting carbon nanotubes (CNTs) and graphene oxide (GO) onto the carbon fiber surface. The effects of surface modification on the properties of carbon fiber (CF) and the resulting composites was investigated systematically. The GO and CNTs were chemically grafted on the carbon fiber surface as a uniform coating, which could significantly increase the polar functional groups and surface energy of carbon fiber. In addition, the GO and CNTs co-grafted on the carbon fiber surface could improve interlaminar shear strength of the resulting composites by 48.12% and the interfacial shear strength of the resulting composites by 83.39%. The presence of GO and CNTs could significantly enhance both the area and wettability of fiber surface, leading to great increase in the mechanical properties of GO/CNTs/carbon fiber reinforced composites.     

Enhanced mechanical properties of multiscale carbon fiber/epoxy composites by fiber surface treatment with graphene oxide/polyhedral oligomeric silsesquioxane

Graphene oxide (GO) and polyhedral oligomeric silsesquioxane (POSS) grafted carbon fiber (CF) was demonstrated to reinforce the mechanical properties of fiber composites. Such a fiber composite was prepared by grafting POSS onto the CF surface using GO as the linkage. The presence of GO linkage and POSS could significantly enhance both the area and wettability of fiber surface, leading to an increase in the interfacial strength between fibers and resin. Compared with the desized CF composites, the grafted CF composites fabricated by compression molding method exhibited 53.05% enhancement in the interlaminar shear strength. The changed surface morphology, surface composition and surface energy were supposed to be related with the interfacial performance of unidirectional composites, as revealed by scanning electron microscopy, atomic force microscope, dynamic contact angle test and X-ray photoelectron microscopy charaterizations.     

Highly conductive graphene oxide/polyaniline hybrid polymer nanocomposites with simultaneously improved mechanical properties

Graphene oxide (GO) was added to a polymer composites system consisting of surfactant-wrapped/doped polyaniline (PANI) and divinylbenzene (DVB). The nanocomposites were fabricated by a simple blending, ultrasonic dispersion and curing process. The new composites show higher conductivity (0.02–9.8 S/cm) than the other reported polymer system filled with PANI (10⁻⁹–10⁻¹ S/cm). With only 0.45 wt% loading of GO, at least 29% enhancement in electric conductivity and 29.8% increase in bending modulus of the composites were gained. Besides, thermal stability of the composites was also improved. UV–Vis spectroscopy, X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) revealed that addition of GO improves the dispersion of PANI in the polymer composite, which is the key to realize high conductivity.     

氧化石墨烯增强水泥基复合材料的力学性能及微观结构

本文采用改进的Hummers法制备了氧化石墨烯（Graphene oxide,GO）悬浮液,通过FTIR、XRD和AFM等测试技术对GO晶体结构和尺寸形态进行了表征,考察了GO掺量和水灰比的变化对GO增强水泥基复合材料力学性能和微观结构的影响。结果表明：GO增强水泥基复合材料抗折抗压强度随GO掺量增加而先提高后降低,且对于抗折强度增强效果远超过抗压强度,当GO掺量为0.03%时,抗折强度达到最大值13.72 MPa;高水灰比条件下掺入GO对水泥胶砂强度的提高更显著;通过SEM对GO增强水泥基复合材料微观结构进行表征,发现GO能够优化水泥水化产物的微观结构形态,细化晶体尺寸,形成更加致密均匀的网络结构,从而改善水泥基复合材料的宏观性能。     

Reduced graphene oxide deposited carbon fiber reinforced polymer composites for electromagnetic interference shielding

Reduced graphene oxide deposited carbon fiber (rGO-CF) was prepared by introducing GO onto CF surface through electrophoretic deposition method, following by reducing the GO sheets on CF with NaBH₄ solution. The rGO-CF was found to be more effective than CF to improve the electromagnetic interference (EMI) shielding property of unsaturated polyester (UP) based composites. With 0.75% mass fraction of rGO-CF, the shielding effectiveness of the composite reached 37.8 dB at the frequency range of 8.2–12.4 GHz (x-band), which had 16.3% increase than that of CF/UP composite (32.5 dB) in the same fiber mass fraction. The results suggest that rGO-CF is a good candidate for the use as a light-weight EMI shielding material.     

氧化石墨烯改性玄武岩纤维及其增强环氧树脂复合材料性能

为了改善玄武岩纤维/环氧树脂复合材料的界面性能,通过偶联剂对氧化石墨烯进行改性,并将改性后的氧化石墨烯引入到上浆剂中对玄武岩纤维进行表面涂覆改性,同时制备了氧化石墨烯-玄武岩纤维/环氧树脂复合材料.采用FTIR表征了氧化石墨烯的改性效果;运用SEM分析了改性上浆剂处理对玄武岩纤维表面及复合材料断口形貌的影响和作用机制.结果表明:偶联剂成功接枝到氧化石墨烯表面;玄武岩纤维经氧化石墨烯改性的上浆剂处理后,表面粗糙度及活性官能团含量增加,氧化石墨烯-玄武岩纤维/环氧树脂界面处的机械齿合作用及化学键合作用增强,界面黏结强度得到改善,玄武岩纤维的断裂强力提高了30.8%,氧化石墨烯-玄武岩纤维/环氧树脂复合材料的层间剪切强度提高了10.6%.     

Free-standing functional graphene reinforced carbon films with excellent mechanical properties and superhydrophobic characteristic

In this work, we reported a simple method to fabricate novel free-standing stiff carbon-based composite films with excellent mechanical properties and superhydrophobic behaviors. The free-standing stiff carbon composite films based on reduced graphene oxide/glassy carbon (rGO/GC) were prepared by the combination of in-situ polymerization and carbonization process. The obtained composite films exhibited excellent mechanical properties by the addition of rGO nanosheets. It was found that incorporating 0.5 wt.% of rGO sheets in GC precursors resulted in enhancements of 99% in strength (202.6 MPa) and 184% in modulus (33.8 GPa), respectively. More interestingly, carbon nanoarrays were uniformly grown on the surface of composite films by the incorporation of rGO sheets. Superhydrophobic surfaces of carbon films were subsequently formed through functionalizing carbon nanoarrays with Trichloro(1H, 1H, 2H, 2H-perfluorodecyl)silane. Contact angle (CA) analysis suggested that superhydrophobic surfaces with a CA as high as 155° could be formed through optimizing the fabrication process.     

Greatly enhanced cryogenic mechanical properties of short carbon fiber/polyethersulfone composites by graphene oxide coating

In order to employ polyethersulfone (PES) in cryogenic engineering field, its cryogenic mechanical performance should be examined and should also be improved to meet the high requirement for cryogenic engineering application. In this work, pure PES, graphene oxide (GO)/PES, short carbon fiber (SCF)/PES, GO/SCF/PES and GO-coated SCF/PES composites are prepared using the extrusion compounding and injection molding techniques. The tensile and flexural properties of these composites are systematically investigated at a typical cryogenic temperature (77 K). It is shown that the cryogenic mechanical properties are enhanced by the addition of GO, SCFs and coated-SCFs. In particular, the GO-coated SCF/PES composites display the greatly enhanced cryogenic mechanical properties with the highest values compared to other PES composites. In addition, it is exhibited that the cryogenic mechanical properties at 77 K of PES and its composites are far higher than those at room temperature (RT).     

Interfacial resistive heating and mechanical properties of graphene oxide assisted CuO nanoparticles in woven carbon fiber/polyester composite

Woven carbon fiber (WCF)-based polyester composites were developed via a vacuum-assisted resin transfer molding (VARTM) process in combination with CuO and graphene oxide (GO). The interlaminar resistive heating behavior and allied mechanical properties of the composites were investigated. The CuO nanoparticles were synthesized from copper nitrate and hexamethylenetetramine precursors using traditional microwave green synthesis, while the GO was synthesized by slight modification of Hummer’s method. The nanoparticle shapes and sizes were assessed via scanning electron microscopy, and the nanoparticle distributions in the composites and their chemical interactions were examined using X-ray diffraction and Fourier transform infrared spectroscopy. It was found that the composite strengths and moduli were enhanced by up to 61.2% and 57.5%, whereas the interfacial shear strength was enhanced by 89.9%. A composite filled with 120-mM CuO and 1.2-phr GO exhibited maximum performance as regards mechanical and resistive heating. Impact resistance measurements were conducted at 3-J penetration energy, and a 154.2% increase in nanofiller content was achieved. The addition of CuO nanoparticles increased the interlaminar resistive heating of the composite and, at 120-mM concentration, a 78.9% increment in the average temperature was attained. The presence of nanoparticles in the interlaminar region also decelerated the cooling process.     

Mechanical properties of graphene oxide: A molecular dynamics study

In this paper, the mechanical properties of graphene oxide are obtained using the molecular dynamics analysis, including the ultimate stress, Young modulus, shear modulus and elastic constants, and the results are compared with those of pristine graphene. It is observed that the increase of oxide agents (–O) and (–OH) leads to the increase of C–C bond length at each hexagonal lattice and as a result, alter the mechanical properties of the graphene sheet. It is shown that the elasticity modulus and ultimate tensile strength of graphene oxides (–O) and (–OH) decrease significantly causing the failure behavior of graphene sheet changes from the brittle to ductile. The results of shear loading tests illustrate that the increase of oxide agents (–O/–OH) results in the decrease of ultimate shear stress and shear module of the graphene sheet. It is shown that the increase of oxide agents in the graphene sheet leads to decrease of the elastic constants, in which the reduction of elastic properties in the armchair direction is more significant than the zigzag direction. Moreover, the graphene sheet with oxide agents (–O) and (–O/–OH) presents an anisotropic behavior.     

Improvements in mechanical properties of carbon fiber-reinforced epoxy composites: A microwave-assisted approach in functionalization of carbon fiber via diamines

A microwave-assisted approach was introduced for functionalization of carbon fibers (CFs) via aliphatic and aromatic diamines in order to enhance the interactions between CF filaments and epoxy resin. CFs was successfully functionalized via one monoamine and three diamine functions. Qualitative (FT-IR) and quantitative (TGA) characterizations have been performed to study the effect of operational parameters, such as retention time and microwave output power, on functionalization degree of CFs. Single fiber tensile testing was employed to investigate possible disruption of CF structure during the functionalization. Moreover, wettability of functionalized CFs was characterized in order to assay the compatibility of functionalized CF with epoxy resin. Mechanical properties of CF-reinforced composites also evaluated for all functionalized CFs. Results revealed that the proposed functionalization procedure is able to highly functionalize the CFs without any discernable structural disruption. Moreover, functionalized CFs demonstrates better compatibility with epoxy resin which led to considerable improvements in mechanical properties of composites (60%). The reinforcing mechanism of different aliphatic and aromatic diamines was also compared in detail.     

氧化石墨烯对玄武岩织物/酚醛树脂复合材料性能的影响

将偶联剂改性的氧化石墨烯(GO)添加到酚醛树脂中,制备了GO改性的玄武岩织物/酚醛树脂复合材料板材。采用三点弯曲、短梁剪切和落锤冲击试验方法,研究了GO的含量对复合材料弯曲性能、层间剪切强度(ILSS)和冲击性能的影响。结果表明,GO的加入显著提高了玄武岩织物/酚醛树脂复合材料的力学性能,随着GO含量的增加,复合材料的力学性能先增大后减小;相对于空白样,当GO的含量为2wt%时,弯曲强度和弯曲模量分别提高了39%和25%;ILSS提高了43%;当GO的含量为1wt%时,冲击破坏载荷增加40%,破坏吸收能量增加60%。     

Tribological properties of copper matrix composites reinforced with homogeneously dispersed graphene nanosheets

Graphene reinforced copper matrix composites (Gr/Cu) were fabricated by electrostatic self-assembly and powder metallurgy. The morphology and structure of graphene oxide, graphene oxide-Cu powders and Gr/Cu composites were characterized by scanning electronic microscopy, transmission electronic microscopy, X-ray diffraction and Raman spectroscopy, respectively. The effects of graphene contents, applied loads and sliding speeds on the tribological behavior of the composites were investigated. The results indicate that the coefficient of friction of the composites decreases first and then increases with increasing the graphene content. The lowest friction coefficient is achieved in 0.3?wt% Gr/Cu composite, which decreases by 65% compared to that of pure copper. The coefficient of friction of the composite does not have significant change with increasing the applied load, however, it increases with increasing the sliding speed. The tribological mechanisms of the composite under different conditions were also investigated.     

Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber–matrix interphase

In this study, carbon fibers (CFs) were coated with graphene nanoplatelets (GnP), using a robust and continuous coating process. CFs were directly immersed in a stable GnP suspension and the coating conditions were optimized in order to obtain a high density of homogeneously and well-dispersed GnP. GnP coated CFs/epoxy composites were manufactured by a prepreg and lay-up method, and the mechanical properties and electrical conductivity of the composites were assessed. The GnP coated CFs/epoxy composites showed 52%, 7%, and 19% of increase in comparison with non-coated CFs/epoxy composites, for 90° flexural strength, 0° flexural strength and interlaminar shear strength, respectively. Meanwhile, incorporating GnP in the CF/epoxy interphase significantly improved the electrical conductivity through the thickness direction by creating a conductive path between the fibers.     

Characterization and mechanical properties of electrospun cellulose acetate/graphene oxide composite nanofibers

Graphene oxide incorporated cellulose acetate composite nanofibers were prepared via an electrospinning technique. The weight percentage of graphene oxide varied from 0.05 to 1.5 wt.% in the polymer solution. The morphologies and crystal structures of the resultant composite nanofibers were investigated by scanning electron microscopy and X-ray diffraction. The specific interaction was demonstrated by Fourier-transform infrared spectroscopy. Tensile test was performed to measure the mechanical properties of the prepared cellulose acetate/graphene oxide composite nanofibers. 1.5 wt.% cellulose acetate/graphene oxide composite nanofibers showed the highest tensile strength and Young's modulus.     

Tensile and thermomechanical properties of short carbon fiber reinforced polyamide 6 composites

In this study, carbon fiber (CF) reinforced polyamide 6 (PA6) composites were prepared by using melt mixing method. Effects of fiber length and content, on the mechanical, thermal and morphological properties of CF reinforced PA6 composites were investigated. Fiber length distributions of composites were also determined by using an image analyzing program. It was seen that the maximum number of fibers were observed in the range of 0–50 μm. Mechanical test results showed that, increasing CF content increased the tensile strength, modulus and hardness values but decreased strain at break values of composites. DSC results showed that T_g and T_m values of composites were not changed significantly with increasing CF content and length. However, heat of fusion and the relative degree of crystallinity values of composites decreased with ascending CF content. DMA results revealed that storage modulus and loss modulus values of composites increased with increasing CF content.     

Electrical conductivity and interlaminar shear strength enhancement of carbon fiber reinforced polymers through synergetic effect between graphene oxide and polyaniline

Utilizing synergetic effect of different ingredients is an important strategy to design new multi-functional composites. In this work, high-strength graphene oxide and conductive polyaniline were selected to dope into divinylbenzene to fabricate a new type carbon fiber reinforced polymer laminates, where a cooperative improvement of through-thickness electrical conductivity and interlaminar shear strength was observed. With addition of 15 wt% of PANI-GO at the optimized weight ratio of 60:1 in the CF/DVB-PANI-GO, 150% enhancement of the electrical conductivity compared to the CF/DVB-PANI, and 76% enhancement of the ILSS compared to the CF/DVB-GO were realized. Our laminates reach 66% in ILSS of that for the conventional CFRP made of epoxy, but the former features about 103 times higher AC conductivity. The mechanism for such a synergic enhancement for both electrical and mechanical performance was investigated by rheology measurement and scanning electron microscopy, where uniform 3-D network formed by PANI/GO has been clearly observed.     

Improving the thermal and mechanical properties of polysulfone by incorporation of graphene oxide

Nanocomposites of polysulfone (PSF)-graphene oxide (GO) were prepared by classical phase inversion method. The structural and surface features and the mechanical and thermal performances of the prepared materials were investigated in detail. TEM and X-ray diffraction analysis indicated a good compatibility and excellent dispersability with PSF matrix for the low GO content (0.25, 0.5 and 1 wt.%) composites. It was observed that GO dispersion was reasonably homogeneous for the composite with 2 wt.% GO. The mechanical properties of the prepared materials were found to be greatly enhanced by the addition of GO for some compositions. The thermogravimetrical investigation demonstrated considerable improvements in thermal stability for the composite with low GO content. This novel material offers a feasible candidate for practical membrane application.     

Hybrid carbon nanotube–carbon fiber composites with improved in-plane mechanical properties

In this study carbon nanotubes (CNTs) were grown on carbon fibers to enhance the in-plane and out-of-plane properties of fiber reinforced polymer composites (FRPs). A relatively low temperature synthesis technique was utilized to directly grow CNTs over the carbon fibers. Several composites based on carbon fibers with different surface treatments (e.g. growing CNTs with different lengths and distribution patterns and coating the fibers with a thermal barrier coating (TBC) layer) were fabricated and characterized via on- and off-axis tensile tests. The on-axis tensile strength and ductility of the hybrid FRPs were improved by 11% and 35%, respectively, due to the presence of the TBC and the surface grown CNTs. This configuration also exhibited 16% improvement on the off-axis stiffness. Results suggest that certain CNT growth patterns and lengths are more pertinent than the other surface treatments to achieve superior mechanical properties.     

Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets

One-dimensional carbon nanotubes and two-dimensional graphene nanosheets with unique electrical, mechanical and thermal properties are attractive reinforcements for fabricating light weight, high strength and high performance metal-matrix composites. Rapid advances of nanotechnology in recent years enable the development of advanced metal matrix nanocomposites for structural engineering and functional device applications. This review focuses on the recent development in the synthesis, property characterization and application of aluminum, magnesium, and transition metal-based composites reinforced with carbon nanotubes and graphene nanosheets. These include processing strategies of carbonaceous nanomaterials and their composites, mechanical and tribological responses, corrosion, electrical and thermal properties as well as hydrogen storage and electrocatalytic behaviors. The effects of nanomaterial dispersion in the metal matrix and the formation of interfacial precipitates on these properties are also addressed. Particular attention is paid to the fundamentals and the structure–property relationships of such novel nanocomposites.