Potential rare-earth modified CeO2 catalysts for soot oxidation: Part III. Effect of dopant loading and calcination temperature on catalytic activity with O2 and NO + O2

CeO₂ and CeReO_x_y catalysts are prepared by the calcination at different temperatures (y = 500–1000 °C) and having a different composition (Re = La³⁺ or Pr^3+/4+_, 0–90 wt.%). The catalysts are characterised by XRD, H₂-TPR, Raman, and BET surface area. The soot oxidation is studied with O₂ and NO + O₂ in the tight and loose contact conditions, respectively. CeO₂ sinters between 800–900 °C due to a grain growth, leading to an increased crystallite size and a decreased BET surface area. La³⁺ or Pr^3+/4+ hinders the grain growth of CeO₂ and, thereby, improving the surface catalytic properties. Using O₂ as an oxidant, an improved soot oxidation is observed over CeLaO_x_y and CePrO_x_y in the whole dopant weight loading and calcination temperature range studied, compared with CeO₂. Using NO + O₂, the soot conversion decreased over CeLaO_x_y catalysts calcined below 800 °C compared with the soot oxidation over CeO₂_y. CePrO_x_y, on the other hand, showed a superior soot oxidation activity in the whole composition and calcination temperature range using NO + O₂. The improvement in the soot oxidation activity over the various catalysts with O₂ can be explained based on an improvement in the external surface area. The superior soot oxidation activity of CePrO_x_y with NO + O₂ is explained by the changes in the redox properties of the catalyst as well as surface area. CePrO_x_y, having 50 wt.% of dopant, is found to be the best catalyst due to synergism between cerium and praseodymium compared to pure components. NO into NO₂ oxidation activity, that determines soot oxidation activity, is improved over all CePrO_x catalysts.     

Potential rare earth modified CeO2 catalysts for soot oxidation: I. Characterisation and catalytic activity with O2

Ceria (CeO₂) and rare-earth modified ceria (CeReO_x with Re = La, Pr, Sm, Y) catalysts are prepared by nitrate precursor calcination and are characterised by BET surface area, XRD, H₂-TPR, and Raman spectroscopy. Potential of the catalysts in the soot oxidation is evaluated in TGA with a feed gas containing O₂. Seven hundred degree Celsius calcination leads to a decrease in the surface area of the rare-earth modified CeO₂ compared with CeO₂. However, an increase in the meso/macro pore volume, an important parameter for the soot oxidation with O₂, is observed. Rare-earth ion doping led to the stabilisation of the CeO₂ surface area when calcined at 1000 °C. XRD, H₂-TPR, and Raman characterisation show a solid solution formation in most of the mixed oxide catalysts. Surface segregation of dopant and even separate phases, in CeSmO_x and CeYO_x catalysts, are, however, observed. CePrO_x and CeLaO_x catalysts show superior soot oxidation activity (100% soot oxidation below 550 °C) compared with CeSmO_x, CeYO_x, and CeO₂. The improved soot oxidation activity of rare-earth doped CeO₂ catalysts with O₂ can be correlated with the increased meso/micro pore volume and stabilisation of external surface area. The segregation of the phases and the enrichment of the catalyst surface with unreducible dopant decrease the intrinsic soot oxidation activity of the potential CeO₂ catalytic sites. Doping CeO₂ with a reducible ion such as Pr^4+/3+ shows an increase in the soot oxidation. However, the ease of catalyst reduction and the bulk oxygen-storage capacity is not a critical parameter in the determination of the soot oxidation activity. During the soot oxidation with O₂, the function of the catalyst is to increase the ‘active oxygen’ transfer to the soot surface, but it does not change the rate-determining step, as evident from the unchanged apparent activation energy (around 150 kJ mol⁻¹), for the catalysed and un-catalysed soot oxidation. Spill over of oxygen on the soot surface and its subsequent adsorption at the active carbon sites is an important intermediate step in the soot oxidation mechanism.     

On the mechanism of model diesel soot-O2 reaction catalysed by Pt-containing La-doped CeO2: A TAP study with isotopic O2

Pt supported on CeO₂ and 10 wt.% La³⁺-doped CeO₂ catalysts have been prepared, characterised and tested for soot oxidation by O₂ in TGA. The reaction mechanism has been studied in a TAP reactor with labelled O₂. Isotopic oxygen exchange between molecular O₂ and ‘O’ on the support/catalyst was observed and soot oxidation is being carried out by lattice oxygen. TAP studies further show that Pt improves O₂ adsorption and, therefore, 5 wt.% Pt-containing catalysts are more active for soot oxidation than the counterpart supports. In addition, CeO₂ doping by La³⁺ leads to an improved support, since La³⁺ stabilises the structure of CeO₂ when calcined at high temperature (1000 °C) and minimises sintering. In addition, La³⁺ improves the Ce⁴⁺/Ce³⁺ reduction as deduced from H₂-TPR experiments and favours oxygen mobility into the lattice. A synergetic effect of Pt and La³⁺ is observed, Pt-containing La³⁺-doped CeO₂ being the most active catalyst for soot oxidation by O₂ among the samples studied.     

Co3O4 based catalysts for NO oxidation and NOx reduction in fast SCR process

Reaction activities of several developed catalysts for NO oxidation and NO_x (NO + NO₂) reduction have been determined in a fixed bed differential reactor. Among all the catalysts tested, Co₃O₄ based catalysts are the most active ones for both NO oxidation and NO_x reduction reactions even at high space velocity (SV) and low temperature in the fast selective catalytic reduction (SCR) process. Over Co₃O₄ catalyst, the effects of calcination temperatures, SO₂ concentration, optimum SV for 50% conversion of NO to NO₂ were determined. Also, Co₃O₄ based catalysts (Co₃O₄-WO₃) exhibit significantly higher conversion than all the developed DeNO_x catalysts (supported/unsupported) having maximum conversion of NO_x even at lower temperature and higher SV since the mixed oxide Co-W nanocomposite is formed. In case of the fast SCR, N₂O formation over Co₃O₄-WO₃ catalyst is far less than that over the other catalysts but the standard SCR produces high concentration of N₂O over all the catalysts. The effect of SO₂ concentration on NO_x reduction is found to be almost negligible may be due to the presence of WO₃ that resists SO₂ oxidation.     

Catalytic behavior of La–Sr–Ce–Fe–O mixed oxidic/perovskitic systems for the NO+CO and NO+CH4+O2 (lean-NOx) reactions

Mixed oxides of the general formula La_0.5Sr_xCe_yFeO_z were prepared by using the nitrate method and characterized by XRD and Mössbauer techniques. The crystal phases detected were perovskites LaFeO₃ and SrFeO_3−x and oxides -Fe₂O₃ and CeO₂ depending on x and y values. The low surface area ceramic materials have been tested for the NO+CO and NO+CH₄+O₂ (“lean-NO_x”) reactions in the temperature range 250–550°C. A noticeable enhancement in NO conversion was achieved by the substitution of La³⁺ cation at A-site with divalent Sr⁺² and tetravalent Ce⁺⁴ cations. Comparison of the activity of the present and other perovskite-type materials has pointed out that the ability of the La_0.5Sr_xCe_yFeO_z materials to reduce NO by CO or by CH₄ under “lean-NO_x” conditions is very satisfying. In particular, for the NO+CO reaction estimation of turnover frequencies (TOFs, s⁻¹) at 300°C (based on NO chemisorption) revealed values comparable to Rh/-Al₂O₃ catalyst. This is an important result considering the current tendency for replacing the very active but expensive Rh and Pt metals. It was found that there is a direct correlation between the percentage of crystal phases containing iron in La_0.5Sr_xCe_yFeO_z solids and their catalytic activity. O₂ TPD (temperature-programmed desorption) and NO TPD studies confirmed that the catalytic activity for both tested reactions is related to the defect positions in the lattice of the catalysts (e.g., oxygen vacancies, cationic defects). Additionally, a remarkable oscillatory behavior during O₂ TPD studies was observed for the La_0.5Sr_0.2Ce_0.3FeO_z and La_0.5Sr_0.5FeO_z solids.     

The bifunctional reaction pathway and dual kinetic regimes in NOx SCR by methane over cobalt mordenite catalysts

The pathway for selective reduction of NO_x by methane over Co mordenite cataysts has been studied by comparing the rates of the individual reactions (NO oxidation, CH₄ oxidation, NO₂ reduction) with that of the combined reaction (NO + O₂ + CH₄). Co⁽⁺²⁾ was exchanged into H-MOR and Na-MOR to give catalysts with different metal loading and number of support protons. Additionally, exchanged Co⁽⁺²⁾ ions were precipitated with NaOH to produce dispersed cobalt oxide on Na-MOR. The NO oxidation rate is the same for ion exchanged Co⁽⁺²⁾ ions in H-MOR and Na-MOR, but the rate of Co⁽⁺²⁾ ions is much lower than that of cobalt oxide. NO oxidation equilibrium is obtained only for those catalysts with high metal loading, cobalt oxide or run at low GHSV. Under the conditions of selective catalytic reduction, methane oxidation by O₂ is low for all catalysts. The turnover frequency of Co on Na-MOR, however, is higher than that on H-MOR. The rate of NO₂ reduction to N₂ is directly proportional to the number of support acid sites and independent of the amount of Co. Comparison of the rates and selectivities for the individual reactions with the combined reaction of NO + O₂ + CH₄ indicates that there are two types of catalysts. For the first, the NO oxidation is in equilibrium and the rate determining step is reduction of NO₂. For these catalysts, the rate (and selectivity) for formation of N₂ is identical from NO + O₂ + CH₄ and NO₂ + CH₄. These catalysts have high metal loading and few acid sites. Nevertheless, the rate of N₂ formation increases with increasing number of protons. For the second type of catalyst, NO oxidation is not in equilibrium and is the rate limiting step. For these catalysts the rate of N₂ formation increases with increasing metal loading. Neither catalyst type, however, is optimized for the maximum formation of N₂. By using a mixture of catalysts, one with high NO oxidation activity and one with a large number of Brønsted acid sites, the rate of N₂ is greater than the weighted sum of the individual catalysts. The current results support the proposal that the pathway for selective catalytic reduction is bifunctional where metal sites affect NO oxidation, while support protons catalyze the formation of N₂.     

Catalytic effect of platinum on the kinetics of carbon oxidation by NO2 and O2

The effect of a commercial Pt/Al₂O₃ catalyst on the oxidation by NO₂ and O₂ of a model soot (carbon black) in conditions close to automotive exhaust gas aftertreatment is investigated. Isothermal oxidations of a physical mixture of carbon black and catalyst in a fixed bed reactor were performed in the temperature range 300–450 °C. The experimental results indicate that no significant effect of the Pt catalyst on the direct oxidation of carbon by O₂ and NO₂ is observed. However, in presence of NO₂–O₂ mixture, it is found that besides the well established catalytic reoxidation of NO into NO₂, Pt also exerts a catalytic effect on the cooperative carbon–NO₂–O₂ oxidation reaction. An overall mechanism involving the formation of atomic oxygen over Pt sites followed by its transfer to the carbon surface is established. Thus, the presence of Pt catalyst increases the surface concentration of –C(O) complexes which then react with NO₂ leading to an enhanced carbon consumption. The resulting kinetic equation allows to model more precisely the catalytic regeneration of soot traps for automotive applications.     

The combustion of carbon particulates using NO/O2 mixtures: The influence of SO4 and NOx trapping materials

The activity of several catalysts are studied in the soot combustion reaction using air and NO/air as oxidising agents. Over Al₂O₃-supported catalysts NO_(g) is a promoter for the combustion reaction with the extent of promotion depending on the Na loading. Over these catalysts SO₄²⁻ poisons this promotion by preventing NO oxidation through a site blocking mechanism. SiO₂ is unable to adsorb NO or catalyse its oxidation and over SiO₂-supported Na catalysts NO_(g) inhibits the combustion reaction. This is ascribed to a competition between NO and O₂. Over Fe-ZSM-5 catalysts the presence of a NO_x trapping component does not increase the combustion of soot in the presence of NO_(g) and it is proposed that this previously reported effect is only seen under continuous NO_x trap operation as NO₂ is periodically released during regeneration and thus available for soot combustion. Experiments during which the [NO]_(g) is varied show that CO, rather than an adsorbed carbonyl-like intermediate, is formed upon reaction between NO₂ (the proposed oxygen carrier) and soot.     

Catalytic oxidation of HCN over a 0.5% Pt/Al2O3 catalyst

The adsorption of HCN on, its catalytic oxidation with 6% O₂ over 0.5% Pt/Al₂O₃, and the subsequent oxidation of strongly bound chemisorbed species upon heating were investigated. The observed N-containing products were N₂O, NO and NO₂, and some residual adsorbed N-containing species were oxidized to NO and NO₂ during subsequent temperature programmed oxidation. Because N-atom balance could not be obtained after accounting for the quantities of each of these product species, we propose that N₂ and was formed. Both the HCN conversion and the selectivity towards different N-containing products depend strongly on the reaction temperature and the composition of the reactant gas mixture. In particular, total HCN conversion reaches 95% above 250 °C. Furthermore, the temperature of maximum HCN conversion to N₂O is located between 200 and 250 °C, while raising the reaction temperature increases the proportion of NO_x in the products. The co-feeding of H₂O and C₃H₆ had little, if any effect on the total HCN conversion, but C₃H₆ addition did increase the conversion to NO and decrease the conversion to NO₂, perhaps due to the competing presence of adsorbed fragments of reductive C₃H₆. Evidence is also presented that introduction of NO and NO₂ into the reactant gas mixture resulted in additional reaction pathways between these NO_x species and HCN that provide for lean-NO_x reduction coincident with HCN oxidation.     

Preparation and characterization of LaFe1−xMgxO3/Al2O3/FeCrAl: Catalytic properties in methane combustion

MnO_x–CeO₂ mixed oxides prepared by sol–gel method, coprecipitation method and modified coprecipitation method were investigated for the complete oxidation of formaldehyde. Structure analysis by H₂-TPR and XPS revealed that there were more Mn⁴⁺ species and richer lattice oxygen on the surface of the catalyst prepared by the modified coprecipitation method than those of the catalysts prepared by sol–gel and coprecipitation methods, resulting in much higher catalytic activity toward complete oxidation of formaldehyde. The effect of calcination temperature on the structural features and catalytic behavior of the MnO_x–CeO₂ mixed oxides prepared by the modified coprecipitation was further examined, and the catalyst calcined at 773 K showed 100% formaldehyde conversion at a temperature as low as 373 K. For the samples calcined below 773 K, no any diffraction peak corresponding to manganese oxides could be detected by XRD measurement due to the formation of MnO_x–CeO₂ solid solution. While the diffraction peaks corresponding to MnO₂ phase in the samples calcined above 773 K were clearly observed, indicating the occurrence of phase segregation between MnO₂ and CeO₂. Accordingly, it was supposed that the strong interaction between MnO_x and CeO₂, which depends on the preparation route and the calcination temperature, played a crucial role in determining the catalytic activity toward the complete oxidation of formaldehyde.     

Catalytic reduction of NO by CO over NiO/CeO2 catalyst in stoichiometric NO/CO and NO/CO/O2 reaction

A new catalyst composed of nickel oxide and cerium oxide was studied with respect to its activity for NO reduction by CO under stoichiometric conditions in the absence as well as the presence of oxygen. Activity measurements of the NO/CO reaction were also conducted over NiO/γ-Al₂O₃, NiO/TiO₂, and NiO/CeO₂ catalysts for comparison purposes. The results showed that the conversion of NO and CO are dependent on the nature of supports, and the catalysts decreased in activity in the order of NiO/CeO₂ > NiO/γ-Al₂O₃ > NiO/TiO₂. Three kinds of CeO₂ were prepared and used as support for NiO. They are the CeO₂ prepared by (i) homogeneous precipitation (HP), (ii) precipitation (PC), and (iii) direct decomposition (DP) method. We found that the NiO/CeO₂(HP) catalyst was the most active, and complete conversion of NO and CO occurred at 210 °C at a space velocity of 120,000 h⁻¹. Based on the results of surface analysis, a reaction model for NO/CO interaction over NiO/CeO₂ has been proposed: (i) CO reduces surface oxygen to create vacant sites; (ii) on the vacant sites, NO dissociates to produce N₂; and (iii) the oxygen originated from NO dissociation is removed by CO.     

Effect of Pt on the water resistance of Co-zeolites upon the SCR of NOx with CH4

The objective of this work was to study the promotional effect of Pt on Co-zeolite (viz. mordenite, ferrierite, ZSM-5 and Y-zeolite) and Co/Al₂O₃ on the selective catalytic reduction (SCR) of NO_x with CH₄ under dry and wet reaction stream. After being reduced in H₂ at 350°C, the PtCo bimetallic zeolites showed higher NO to N₂ conversion and selectivity than the monometallic samples, as well as a combination of the latter samples such as mechanical mixtures or two-stage catalysts. After the same pretreatment, under wet reaction stream, the bimetallic samples were also more active. Among the other catalysts studied with 5% of water in the feed, (NO = CH₄ = 1000 ppm, O₂ = 2%), the NO conversion dropped to zero over Co_2.0Mor at 500°C and GHSV = 30,000 h⁻¹, whereas it is 20% in Pt_0.5Co_2.0Mor. In Pt/Co/Al₂O₃ the NO_x conversion dropped below 5% with only 2% of water under the same reaction conditions. The specific activity given as molecules of NO converted per total metal atom per second were 16.5 × 10⁻⁴ s⁻¹ for Pt_0.5Co_2.0Fer, 13 × 10⁻⁴ s⁻¹ for Pt_0.5Co_2.0Mor, 4.33 × 10⁻⁴ s⁻¹ for Pt_0.5Co_2.0ZSM-5 and 0.5 × 10⁻⁴ s⁻¹ for Pt/Co/Al₂O₃. The Y-zeolite-based samples were inactive in both mono and bimetallic samples. The species initially present in the solid were Pt° and Co°, together with Co²⁺ and Pt²⁺ at exchange positions. Co° seems not to participate as an active site in the SCR of NO_x. Those species remained after the reaction but some reorganization occurred. A synergetic effect among the different species that enhances both the NO to NO₂ reaction, the activation of CH₄ and also the ability of the catalyst to adsorb NO, could be responsible for the high activity and selectivity of the bimetallic zeolites.     

The origin of N2O formation in the selective catalytic reduction of NOx by NH3 in O2 rich atmosphere on Cu-faujasite catalysts

The selective catalytic reduction (SCR) of NO_x (NO + NO₂) by NH₃ in O₂ rich atmosphere has been studied on Cu-FAU catalysts with Cu nominal exchange degree from 25 to 195%. NO₂ promotes the NO conversion at NO/NO₂ = 1 and low Cu content. This is in agreement with next-nearest-neighbor (NNN) Cu ions as the most active sites and with N_xO_y adsorbed species formed between NO and NO₂ as a key intermediate. Special attention was paid to the origin of N₂O formation. CuO aggregates form 40–50% of N₂O at ca. 550 K and become inactive for the SCR above 650 K. NNN Cu ions located within the sodalite cages are active for N₂O formation above 600 K. This formation is greatly enhanced when NO₂ is present in the feed, and originated from the interaction between NO (or NO₂) and NH₃. The introduction of selected co-cations, e.g. Ba, reduces very significantly this N₂O formation.     

Pt/MnOx–CeO2 catalysts for the complete oxidation of formaldehyde at ambient temperature

MnO_x–CeO₂ mixed oxides with a Mn/(Mn + Ce) molar ratios of 0–1 were prepared by a modified coprecipitation method and investigated for the complete oxidation of formaldehyde. The MnO_x–CeO₂ with Mn/(Mn + Ce) molar ratio of 0.5 exhibited the highest catalytic activity among the MnO_x–CeO₂ mixed oxides. Structure analysis by X-ray powder diffraction and temperature-programmed reduction of hydrogen revealed that the formation of MnO_x–CeO₂ solid solution greatly improved the low-temperature reducibility, resulting in a higher catalytic activity for the oxidation of formaldehyde. Promoting effect of Pt on the MnO_x–CeO₂ mixed oxide indicated that both the Pt precursors and the reduction temperature greatly affected the catalytic performance. Pt/MnO_x–CeO₂ catalyst prepared from chlorine-free precursor showed extremely high activity and stability after pretreatment with hydrogen at 473 K. 100% conversion of formaldehyde was achieved at ambient temperature and no deactivation was observed for 120 h time-on-stream. The promoting effect of Pt was ascribed to enhance the effective activation of oxygen molecule on the MnO_x–CeO₂ support.     

Synergistic catalysis of carbon black oxidation by Pt with MoO3 or V2O5

A series of SiO₂-supported MoO₃, V₂O₅, and Pt catalysts were prepared for the study of model soot oxidation with simulated diesel exhaust gas. Composite samples of Pt with the metal oxides demonstrated higher oxidation activities than the single-component SiO₂-supported MoO₃, V₂O₅ or Pt catalysts in the absence of SO₂ in the reactant gas. Based on the effects of NO₂ on carbon oxidation, a synergistic reaction mechanism was suggested to explain the effects of combining Pt with the oxides: Pt catalyzes the oxidation of NO with gas phase O₂ to NO₂, while MoO₃ and V₂O₅ catalyze the oxidation of carbon with NO₂. Finally, the effects of SO₂ on the carbon oxidation reaction were examined and discussed.     

Catalytic decomposition of N2O over CeO2 promoted Co3O4 spinel catalyst

A series of CeO₂ promoted cobalt spinel catalysts were prepared by the co-precipitation method and tested for the decomposition of nitrous oxide (N₂O). Addition of CeO₂ to Co₃O₄ led to an improvement in the catalytic activity for N₂O decomposition. The catalyst was most active when the molar ratio of Ce/Co was around 0.05. Complete N₂O conversion could be attained over the CoCe0.05 catalyst below 400 °C even in the presence of O₂, H₂O or NO. Methods of XRD, FE-SEM, BET, XPS, H₂-TPR and O₂-TPD were used to characterize these catalysts. The analytical results indicated that the addition of CeO₂ could increase the surface area of Co₃O₄, and then improve the reduction of Co³⁺ to Co²⁺ by facilitating the desorption of adsorbed oxygen species, which is the rate-determining step of the N₂O decomposition over cobalt spinel catalyst. We conclude that these effects, caused by the addition of CeO₂, are responsible for the enhancement of catalytic activity of Co₃O₄.     

Water-induced bulk Ba(NO3)2 formation from NO2 exposed thermally aged BaO/Al2O3

Phase changes in high temperature treated (>900 °C) 8 or 20 wt% BaO supported on γ-Al₂O₃ model lean NO_x trap (LNT) catalysts, induced by NO₂ and/or H₂O adsorption, were investigated with powder X-ray diffraction (XRD), solid state ²⁷Al magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy, and NO₂ temperature programmed desorption (TPD) experiments. After calcination in dry air at 1000 °C, the XRD and solid state ²⁷Al MAS NMR results confirm that stable surface BaO and bulk BaAl₂O₄ phases are formed for 8 and 20 wt% BaO/Al₂O₃, respectively. Following NO₂ adsorption over these thermally treated samples, some evidence for nanosized Ba(NO₃)₂ particles are observed in the XRD results, although this may represent a minority phase. However, when water was added to the thermally aged samples after NO₂ exposure, the formation of bulk crystalline Ba(NO₃)₂ particles was observed in both samples. Solid state ²⁷Al MAS NMR is shown to be a good technique for identifying the various Al species present in the materials during the processes studied here. NO₂ TPD results demonstrate a significant loss of uptake for the 20 wt% model catalysts upon thermal treatment. However, the described phase transformations upon subsequent water treatment gave rise to the partial recovery of NO_x uptake, demonstrating that such a water treatment of thermally aged catalysts can provide a potential method to regenerate LNT materials.     

Structure evolution of nanocrystalline CeO2 and CeLnOx mixed oxides (Ln = Pr, Tb, Lu) in O2 and H2 atmosphere and their catalytic activity in soot combustion

This paper reports results of studies on structure and activity in soot combustion of nanocrystalline CeO₂ and CeLnOx mixed oxides (Ln = Pr, Tb, Lu, Ce/Ln atomic ratios 5/1). Nano-sized (4–5 nm) oxides with narrow size distribution were prepared by a microemulsion method W/O. Microstructure, morphology and reductivity of the oxides annealed up to 950 °C in O₂ and H₂ were analyzed by HRTEM, XRD, FT-IR, Raman spectroscopy and H₂-TPR. Obtained mixed oxides had fluorite structure of CeO₂ and all exhibited improved resistance against crystal growth in O₂, but only CeLuOx behaved better than CeO₂ in hydrogen.

The catalytic activity of CeO₂, CeLnOx and physical mixtures of CeO₂ + Ln₂O₃ in a model soot oxidation by air was studied in “tight contact” mode by using thermogravimetry. Half oxidation temperature T_1/2 for soot oxidation catalysed by nano-sized CeO₂ and CeLnOx was similar and ca. 100 °C lower than non-catalysed oxidation. However, the mixed oxides were much more active during successive catalytic cycles, due to better resistance to sintering. Physical mixtures of nanooxides (CeO₂ + Ln₂O₃) showed exceptionally high initial activity in soot oxidation (decrease in T_1/2 by ca. 200 °C) but degraded strongly in successive oxidation cycles. The high initial activity was due to the synergetic effect of nitrate groups present in highly disordered surface of nanocrystalline Ln₂O₃ and enhanced reductivity of nanocrystalline CeO₂.     

Quantification of the in situ DRIFT spectra of Pt/K/γ-A12O3 NOx adsorber catalysts

A method to quantify DRIFT spectral features associated with the in situ adsorption of gases on a NO_x adsorber catalyst, Pt/K/Al₂O₃, is described. To implement this method, the multicomponent catalyst is analysed with DRIFT and chemisorption to determine that under operating conditions the surface comprised a Pt phase, a pure γ-Al₂O₃ phase with associated hydroxyl groups at the surface, and an alkalized-Al₂O₃ phase where the surface –OH groups are replaced by –OK groups. Both DRIFTS and chemisorption experiments show that 93–97% of the potassium exists in this form. The phases have a fractional surface area of 1.1% for the 1.7 nm-sized Pt, 34% for pure Al₂O₃ and 65% for the alkalized-Al₂O₃. NO₂ and CO₂ chemisorption at 250 °C is implemented to determine the saturation uptake value, which is observed with DRIFTS at 250 °C. Pt/Al₂O₃ adsorbs 0.087 μmol CO₂/m²and 2.0 μmol NO₂/m², and Pt/K/Al₂O₃ adsorbs 2.0 μmol CO₂/m²and 6.4 μmol NO₂/m². This method can be implemented to quantitatively monitor the formation of carboxylates and nitrates on Pt/K/Al₂O₃ during both lean and rich periods of the NO_x adsorber catalyst cycle.     

Isomerization of n-hexane over mono- and bimetallic Pd–Pt catalysts supported on ZrO2–Al2O3–WOx prepared by sol–gel

The catalytic performance of mono- and bimetallic Pd (0.6, 1.0 wt.%)–Pt (0.3 wt.%) catalysts supported on ZrO₂ (70, 85 wt.%)–Al₂O₃ (15, 0 wt.%)–WO_x (15 wt.%) prepared by sol–gel was studied in the hydroisomerization of n-hexane. The catalysts were characterized by N₂ physisorption, XRD, TPR, XPS, Raman, NMR, and FT-IR of adsorbed pyridine. The preparation of ZrW and ZrAlW mixed oxides by sol–gel favored the high dispersion of WO_x and the stabilization of zirconia in the tetragonal phase. The Al incorporation avoided the formation of monoclinic-WO₃ bulk phase. The catalysts increased their S_BET for about 15% promoted by Al₂O₃ addition. Various oxidation states of WO_x species coexist on the surface of the catalysts after calcination. The structure of the highly dispersed surface WO_x species is constituted mainly of isolated monotungstate and two-dimensional mono-oxotungstate species in tetrahedral coordination. The activity of Pd/ZrW catalysts in the hydroisomerization of n-hexane is promoted both with the addition of Al to the ZrW mixed oxide and the addition of Pt to Pd/ZrAlW catalysts. The improvement in the activity of Pd/ZrAlW catalysts is ascribed to a moderated acid strength and acidity, which can be correlated to the coexistence of W⁶⁺ and reduced-state WO_x species (either W⁴⁺ or W⁰). The addition of Pt to the Pd/ZrAlW catalyst does not modify significantly its acidic character. Selectivity results showed that the catalyst produced 2MP, 3MP and the high octane 2,3-dimethylbutane (2,3-DMB) and 2,2-dimethylbutane (2,2-DMB) isomers.