Thermal characterization and thermal degradation of copolyimides containing fluorine and phosphine oxide

A series of copolyimides containing different ratios of fluorine and phosphine oxide were synthesized. The copolymers were characterized with Fourier transform infrared, differential scanning calorimetry, and thermogravimetric analysis measurements. The copolymers were thermally stable up to 700 K and exhibited glass‐transition temperatures in the range of 495–562 K. The glass‐transition temperatures of the copolymers decreased with an increase in the phosphine oxide content. The thermal decomposition behavior of the copolymers was investigated. The copolymers with higher phosphine oxide contents displayed lower onset decomposition temperatures and char yields. A new method involving the multiple‐rate isotemperature was used to define the most possible mechanism [G(α)] for the reactions. The overall kinetic model function of the thermal decomposition of these copolymers obeyed the Avrami–Erofeev model equation, G(α) = [?ln(1 ? α)]^1/m, where α is the conversion degree. The apparent kinetic parameters of the degradation processes were also obtained. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2139–2143, 2005     

Preparation of polyimide/nylon 6 graft copolymers from polyimides containing ester moieties: Synthesis and characterization

Polyimide‐g‐nylon 6 copolymers were prepared by the polymerization of phenyl 3,5‐diaminobenzoate with several diamines and dianhydrides with a one‐step method. The polyimides containing pendant ester moieties were then used as activators for the anionic polymerization of molten ?‐caprolactam. In the graft copolymer syntheses, the phenyl ester groups reacted quickly with caprolactam anions at 120°C to generate N‐acyllactam moieties, which activated the anionic polymerization. The thermal stability and chemical resistance were dramatically increased by the incorporation of only 5 wt % polyimide in the graft copolymers. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 309–318, 2006     

polyimides containing s-triazine rings in the main chain: Synthesis and characterization

Eight s-triazine-containing polyimides were synthesized by solution polycondensation of diisocyanates having an s-triazine ring with pyromellitic dianhydride in dimethylacetamide. Polyimides derived from meta-oriented diisocyanates were amorphous and soluble in dipolar aprotic solvents while those based on para-oriented diisocyanates were semicrystalline and insoluble in organic solvents. However, all the polyimides were soluble in concentrated sulphuric acid. The polyimides showed similar patterns of decomposition with no weight loss below 300°C in air.     

Synthesis and characterization of soluble random copolyimides

Random copolyimides with different proportions of a diamine component were prepared by polymerizing different compositions of diamines with various dianhydrides and imidized thermally to 260°C. The imidization percent of poly(amic acid) was characterized at various temperatures by infrared spectroscopy. The homopolyimide based on bis[4‐(3‐aminophenoxy)phenyl]sulfone and pyromellitic dianhydride was the only one soluble. By changing the compositions of bis[4‐(3‐aminophenoxy)phenyl]sulfone and other diamines with pyromellitic dianhydride in N‐methyl‐2‐pyrrolidone, soluble random copolyimides could be prepared. By random copolymerization, the thermal properties and viscosities of homopolyimide could be controlled. All the soluble polyimides prepared in this work were amorphous because of the lack of stereoregularity. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 272–277, 1999     

Synthesis and characterization of sulfonated polyimides containing aliphatic linkages in the main chain

A series of six‐membered sulfonated polyimides with aliphatic linkages (SPIAs) was successfully synthesized using 1,4,5,8‐naphthalenetetracarboxylic dianhydride (NTDA), 4,4′‐diaminobiphenyl 2,2′‐disulfonic acid (BDSA) as the sulfonated diamine, and aliphatic diamines H₂N(CH₂)_nNH₂ where n = 6, 8, 10, 12. These SPIAs were evaluated for thermal stability, ion exchange capacity (IEC), water uptake, proton conductivity, and hydrolytic stability. Proton conductivity and hydrolytic stability of the SPIAs were compared with the fully aromatic polyimide (MDA‐SPI) prepared from 4,4′‐methylenedianiline (MDA), BDSA, and NTDA. All the SPIAs exhibited high thermal stability. As the chain length of the aliphatic diamine decreased, the IEC and water uptake of the SPIAs increased. The SPIAs showed higher proton conductivity than commercially available membranes such as Nafion 117 at high temperatures and higher proton conductivity than MDA‐SPI at all temperatures. All SPIAs exhibited a hydrolytic stability more than twice as high as that of MDA‐SPI. Copyright © 2006 Society of Chemical Industry     

Synthesis and characterization of pyridine‐containing poly(imide‐siloxane)s and their adhesion to copper foil

A series of pyridine‐containing poly(imide‐siloxane) (PIS) copolymers with different amounts of PDMS with various segmental lengths were synthesized from 2,6‐diaminopyridine (DAP), α,ω′‐aminopropylpoly(dimethylsiloxane) (PDMS), 1,3‐bis(4‐aminophenoxy)benzene (APB), and 4,4′‐oxydiphthalic dianhydride (ODPA). A modified synthetic approach was applied instead of approaches commonly reported in the literature, to ensure the incorporation of DAP and PDMS. The effects of the content and the segmental length of PDMS on the thermal glass transition temperature (T_g), dielectric constant, and surface electrical resistivity of the copolymer are investigated. The copolymers were attached to copper foil by hot‐pressing, and changes in wettability caused the peel strength of the laminates to increase with the PDMS content, but to decrease as the DAP content increased. Furthermore, X‐ray photoelectron spectroscopy was employed to determine the loci of failures (LOF) of the laminates and to monitor the movement of LOF, which varies with the PDMS content. For those laminates with good peel strengths, the LOF occur in the interior of PIS layer, indicating that the adhesion is cohesive rather than adhesive. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and characterization of highly soluble poly(ether imide)s containing indane moieties in the main chain

A new indane containing unsymmetrical diamine monomer ( 3 ) was synthesized. This diamine monomer leads to a number of novel semifluorinated poly (ether imide)s when reacted with different commercially available dianhydrides like benzene‐1,2,4,5‐tetracarboxylic dianhydride (PMDA), benzophenone‐3,3′, 4,4′‐tetracarboxylic dianhydride (BTDA), 4,4′‐(hexafluoro‐isopropylidene)diphthalic anhydride (6FDA), 4,4′‐oxydiphthalic anhydride (ODPA), and 4,4′‐(4,4′‐Isopropylidenediphenoxy)bis(phthalic anhydride) (BPADA) by thermal imidization route. All the poly(ether imide)s showed excellent solubility in several organic solvents such as N‐methylpyrrolidone (NMP), N,N‐dimethylformamide (DMF), N,N‐dimethylacetamide (DMAc), tetrahydrofuran (THF), chloroform (CHCl₃) and dichloromethane (DCM) at room temperature. These light yellow poly (ether imide)s showed very low water absorption (0.19–0.30%) and very good optical transparency. Wide angle X‐ray diffraction measurements revealed that these polymers were amorphous in nature. The polymers exhibited high thermal stability up to 526°C in nitrogen with 5% weight loss, and high glass transition temperature up to 265°C. The polymers exhibited high tensile strength up to 85 MPa, modulus up to 2.5 GPa and elongation at break up to 38%, depending on the exact polymer structure. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of novel polyimides containing triazoles units in the main chain by click chemistry

In this study, some polyimides containing triazoles units in the main chain was prepared from the polymerization of dialkynes including imide linkages and diazides in the presence of Cu (I) catalyst in yield of 76.2–87.6%, with inherent viscosity of 0.37–0.53 dL g^?1. The obtained polymers are soluble in polar aprotic solvents such as N,N‐dimethyformamide (DMF), N,N‐dimethyacetamide (DMAc), dimethyl sulfoxide (DMSO), and N‐methyl‐2‐pyrrolidone (NMP). These polymers were characterized using FT‐IR, ¹H‐NMR, and elemental analysis techniques. Their thermal stability was evaluated with thermogravimetric (TGA) analysis and differential scanning calorimetry (DSC) techniques under a nitrogen atmosphere which is indicative of their good thermal stability. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of soluble copoly(arylene ether sulfone phenyl-s-triazine)s containing phthalazinone moieties in the main chain

A series of new poly(arylene ether sulfone phenyl-s-triazine) copolymers containing phthalazinone moieties in the main chain (PPESPs) were prepared by a direct solution polycondensation of 4-(4-hydroxylphenyl)(2H)-phthalazin-1-one (HPPZ) with 2-phenyl-4,6-bi(4-fluorophenyl)-1,3,5-triazine (BFPT) and 4,4′-dichlorodiphenyl sulfone (DCS). Model reactions monitored by HPLC indicated that BFPT had slightly higher reactivity than DCS in nucleophilic displacement reactions. The obtained random copolymers were characterized by FTIR, NMR, elemental analysis and GPC. The presence of sulfone and phthalazinone in the polymer chain results in an improvement in the solubility of poly(arylene ether phenyl-s-triazine)s in common organic solvents, such as N-methylpyrrolidone, N,N-dimethyl acetamide (DMAc), chloroform, sulfolane and pyridine. Thermal analysis reveal that the copolymers exhibit high glass transition temperatures (T_gs) ranging from 271–300 °C, and excellent thermal stability associated with decomposition temperatures for 5% mass-loss exceeding 503 °C. All copolymers are amorphous except PPESP28 as evidenced by WAXD. Their T_gs and solubility increase with an increase in sulfone content in the polymer backbone, while the crystallinity and overall thermal stability appear to decrease. This kind of phthalazinone-based copoly(arylene ether sulfone phenyl-s-triazine)s may be considered a good candidate for using as high-performance structural materials.     

Synthesis and characterization of new flame‐retardant poly(amide‐imide)s containing phosphine oxide and hydantoin moieties in the main chain

Six new flame‐retardant poly(amide‐imide)s (PAIs) 9a–f with high inherent viscosities containing phosphine oxide and hydantoin moieties in main chain were synthesized from the polycondensation reaction of N,N′‐(3,3′‐diphenylphenylphosphine oxide) bistrimellitimide diacid chloride 7 with six hydantoin derivatives 8a–f by two different methods such as solution and microwave assisted polycondensation. Results showed that the microwave assisted polycondensation, by using a domestic microwave oven, proceeded rapidly, compared with solution polycondensation, and was completed in about 7–9 min. All of the obtained polymers were fully characterized by means of elemental analysis, viscosity measurements, solubility test, and FTIR spectroscopy. Thermal properties and flame retardant behavior of the PAIs 9a–f were investigated using thermal gravimetric analysis (TGA and DTG) and limited Oxygen index (LOI). Data obtained by thermal analysis (TGA and DTG) revealed that these polymers showed good thermal stability. Furthermore, high char yields in TGA and good LOI values indicated that these polymers are capable of exhibiting good flame retardant properties. These polymers can be potentially utilized in flame retardant thermoplastic materials. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5062–5071, 2006     

Synthesis,characterization, and thermal studies of polyamides and polyimides containing two silarylene units in the main chain

Polyamides (PAs) and polyimides (PIs) containing two silarylene units were synthesized and characterized by their spectroscopic properties. Bis(4‐aminophenyl)methylphenylsilane was employed as a unique diamine, whereas acid dichloride and dianhydride monomers contained combinations of methyl and phenyl groups bonded to the silicon atom. The PAs were obtained in dimethylformamide solutions, and the PIs were prepared by thermal cyclization of the respective poly(amic acid)s (PAAs). The yields were low (32–51%), and the inherent viscosities for PAAs were slightly higher than the PA values. The low inherent viscosities were indicative of oligomeric species. The thermal stability was also evaluated by thermogravimetric analysis and differential scanning calorimetry analysis. In both series, the glass‐transition temperatures increased with the replacement of methyl groups by aromatic rings according to the lower mobility of the polymeric chain. On the other hand, an increase in the aromatic content also increased the thermal stability of the PAs and PIs, and this was registered through their thermal decomposition temperatures. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of new polyamides containing p‐phenylenediacryloyl moieties in the main chain

Six new polyamides 8a–f containing p‐phenylenediacryloyl moieties in the main chain were prepared by the direct polycondensation reaction of bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 with 1,4‐diphenylene diamine 7a , 1,3‐diamino toluene 7b , 1,5‐diamino naphthalene 7c , 4,4′‐diamino diphenyl ether 7d , 4,4′‐diamino diphenyl sulfone 7e , and 3,3′‐diamino diphenylsulfone 7f by using thionyl chloride, N‐methyl‐2‐pyrolidone, and pyridine as condensing agents. These new polymers 8a–f were obtained in high yield and inherent viscosity between 0.35–0.65 dL/g. The resulting polyamides were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test, FTIR and UV–vis spectroscopy. Diacid acid 6 as a new monomer containing p‐phenylenediacryloyl moiety was synthesized by using a three‐step reaction. First, p‐phenylenediacrylic acid 3 was prepared by reaction of terephthal aldehyde 1 with malonic acid 2 in the presence of pyridine, then diacid 3 was converted to p‐phenylenediacryloyl chloride 4 by reaction with thionyl chloride. Finally, bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 was prepared by the condensation reaction of phenylenediacryloyl chloride 4 with p‐aminobenzoic acid 5 . © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Clay-reinforced semi-aromatic polyether-amide nanocomposites containing phosphine oxide moieties: synthesis and characterization

Semi-aromatic flame retardant polyether-amide/organoclay nanocomposites were synthesis through solution blending technique. Surface modification of the montmorillonite clay was performed with 1,4-bis[4,4′-amino phenoxy]butane for ample compatibilization with the polyamide matrix. The polymer chains were produced from the poly condensation reaction of bis(3-amino phenyl)phenyl phosphine oxide (4) with 1,4-(4-carboxy phenoxy)butane (3). The effect of clay dispersion and the interaction between clay and polyamide chains on the properties of nanocomposites were investigated using X-ray diffraction, scanning electron microscopy, limited oxygen index, differential scanning calorimetry, thermogravimetric analysis, and water uptake measurements. The diacid 3 as a monomer was prepared from the reaction of 4-hydroxy benzoic acid (1) with 1,4-dibromo butane (2) in the presence of NaOH solution.     

Synthesis,characterization, and electro‐optical properties of a soluble conjugated polymer containing an oxadiazole unit in the main chain

A novel copolymer, poly{[2,5‐diphenylene‐1,3,4‐oxadiazole‐vinylene]‐alt‐[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene]}(MEH‐OPPV) containing a high‐electron‐affinity unit of aromatic oxadiazole in the main chain is synthesized through the Wittig condensation reaction. The obtained copolymer is easily soluble in conventional organic solvents. The structure of the copolymer was characterized by Fourier transform infrared, ¹H nuclear magnetic resonance, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and ultraviolet‐visible and photoluminescence spectroscopy. The TGA result indicates that the copolymer has very high thermal stability (stable up to 310°C in nitrogen), while DSC investigation demonstrates that the glass transition temperature (T_g) is 143°C, which might be a merit for the long‐life operation of light‐emitting devices. The absorption spectrum of film sample of the copolymer reveals two peaks at 310 and 370 nm, respectively, and the edge absorption corresponds to a band gap of 2.46 eV. A single‐layer light‐emitting diode device ITO/MEH‐OPPV/Al is successfully fabricated. The device emits visible yellowish‐green light above the bias voltage of 4.0 V under ambient condition. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2618–2623, 2003     

Synthesis and characterization of photo-crosslinkable liquid crystalline copolyesters containing arylidene-keto and chalcone moieties

A series of six photo-crosslinkable thermotropic liquid crystalline copolyesters were prepared by polycondensation method at room temperature using tetra-n-butylammonium bromide as the phase transfer catalyst. The diacid chloride involved in this process was adipoyl chloride, the common diol (diol-1), also referred to as bischalcone diol, used was 3,3′-benzene-1,4-diylbis[1-(4-hydroxyphenyl)prop-2-en-1-one] and six different arylidene diols were involved as varying diols (diol-2), in the ratio 2:1:1. The common diol and the six arylidene diols were synthesized by the acid-catalyzed Claisen-Schmidt synthesis. The inherent viscosity η_inh of these six copolyesters was found between 0.35 and 0.45. The microstructure of the repeating unit present in the copolyester chain was confirmed by FT-IR, ¹H–NMR and ¹³C–NMR spectroscopic techniques. Thermal transition temperatures, resolved from the DSC thermograms, were found to be well above room temperature. Optical polarizing microscopy was employed to establish the liquid crystalline property and all the polymers were found to have nematic phase. The photo-crosslinking behaviour of these copolyesters was studied in DMF solution at different time intervals. The copolyesters having methoxy group in them absorb UV-A rays (315–400 nm) for a longer duration, which promotes them to be good candidates for UV filters and sunscreens.     

Synthesis and characterization of copolyimides with high solubility

A series of copolyimides were prepared from various diamines (polysiloxane and isophorone units) with aromatic tetracarboxylic dianhydrides via a two‐step (thermal imidization) method. The monomers and polymers were produced in high yields, and the copolyimides containing Si? O? C bonds and asymmetric meta catenation in the polymer backbone exhibited good solubility. The glass‐transition temperatures (T_g's) of all the copolyimides were found to be 201–262 and 215–258°C by differential scanning calorimetry (DSC) and dynamic mechanical analysis, respectively. Thermogravimetric analyses indicated that the polymers were fairly stable up to 502–578°C (10 wt % loss in N2) and 490–574°C (10 wt % loss in air). The char yields at 800°C in N2 and air atmospheres were 26–59 and 20–53%, respectively. The copolymerization results, determined with 1H‐NMR and DSC, indicated a random copolymer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1963–1970, 2003     

Synthesis,characterization and antimicrobial properties of new poly(ether-ketone)s and copoly(ether-ketone)s containing diarylidenecycloalkanone moieties in the main chain

A new category of linear poly(ether-ketone)s IV_a–d and copoly(ether-ketone)s V_a–f containing diarylidenecycloalkanone moieties in the main chain has been synthesized by solution polycondensation of 4,4′-bis (chloroacetyl)diphenylether I , with different phenoxides of diarylidenecycloalkanones II_a–d . The model compound III was synthesized from the monomer I with sodium phenoxide in DMF and K₂CO₃, and its structure was confirmed by elemental and spectral analyses. The resulting polyketones and copolyketones were characterized by elemental and spectral analyses, beside solubility and viscometry measurements. The thermal properties of those polymers were evaluated by TGA and DTA measurements and correlated to their structural units. X-ray analysis showed that polymers having some degree of crystallinity in the region 2θ = 5–60°. In addition, the biological screening and morphological properties of selected examples of the polymers were tested. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Heterocyclic polyimides containing siloxane groups in the main chain

BACKGROUND: Among the polymers widely studied for applications in advanced techniques, aromatic polyimides have received considerable attention due to their outstanding thermal stability associated with good electrical and mechanical properties. However, these polymers are usually difficult to process, being insoluble and without a glass transition. To improve the processing characteristics of polyimides, modification of their structure is often achieved by the introduction of flexible linkages in the macromolecular chain or various substituents on the aromatic rings. RESULTS: A series of polyimides and intermediate polyamidic acids were synthesized from aromatic oxadiazole‐diamines and a dianhydride containing a siloxane bridge (? R₂Si? O? SiR₂? ). These polymers exhibit good solubility in certain organic solvents and can be cast into thin and very thin films from their solutions. They exhibit high thermal stability with decomposition being above 440 °C and relatively low glass transition temperatures in the range 160–190 °C. These polymers show strong photoluminescence in the blue spectral region. CONCLUSION: The introduction of oxadiazole rings together with siloxane groups into the chains of aromatic polyimides gives highly thermostable polymers with remarkable solubility and film‐forming ability and that emit blue light, being attractive for applications in micro‐ and nanoelectronics and other related advanced fields. Copyright © 2009 Society of Chemical Industry     

Synthesis,characterization, and properties of new siloxane grafted copolyimides

Three new siloxane containing grafted copolyimides have been prepared by one‐pot solution imidization technique. The polymers are made by the reaction of 4,4′‐(4,4′‐isopropylidenediphenoxy)bis(phthalic anhydride) (BPADA) with commercially available diamine 4,4′‐oxydianiline (ODA) with variation of silicon containing diamine, namely 3,5‐diaminobenzoate terminated polydimethylsiloxane (DBPDMS), as a comonomer to 10, 20, and 30 wt %. The films of the polymers were prepared by casting the polymer solution in dichloromethane. The polymers have been well‐characterized by GPC, IR, and NMR techniques. Thermal stabilities and decomposition behavior of the copolyimides were studied by DSC and TGA. The water contact angle values of the films indicate hydrophobic nature of the polymers. Thermal, flame retardant, mechanical, and surface properties of these polymers have been compared with the homopolyimide and with polyimides where polysiloxane is incorporated in the main chain. DSC revealed melting of the grafted siloxane chain at sub‐ambient temperature and a glass transition corresponding to the main polymer chain above 200°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and properties of novel flame‐retardant poly(amide‐imide)s containing phosphine oxide moieties in main chain by microwave irradiation

Eight new flame‐retardant poly(amide‐imide)s with high inherent viscosities containing phosphine oxide moieties in main chain were synthesized from the polycondensation reaction of N,N′‐(3,3′‐diphenylphenylphosphine oxide) bistrimellitimide diacid chloride 7, with eight ;aromatic diamine 8a–h by two different methods such as solution and microwave‐assisted polycondensation. Results showed that the microwave‐assisted polycondensation by using a domestic microwave oven proceeded rapidly, compared with solution polycondensation and were completed within about 10–12 min. The resulting poly(amide‐imide)s 9a–h showed high thermal stability and flame‐retardant properties. All of the obtained polymers were fully characterized by means of elemental analysis, viscosity measurements, solubility test, and FTIR spectroscopy. Thermal properties of the PAIs 9a–h were investigated by using thermal gravimetric analysis (TGA), derivative thermogravimetric analysis (DTG), and differential scanning calorimetry (DSC). Char yield measurements at 600°C demonstrated that incorporating phosphine oxide moieties in polymer backbone markedly improves their flame retardancy. All of the earlier polymers were soluble at room temperature in various organic solvents such as NMP, DMF, DMSO, DMAc, and concentrated sulfuric acid. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4263–4269, 2006