Thermal properties of poly(vinyl alcohol)/poly(diallyldi‐methylammonium chloride) interpenetrating polymer networks

Interpenetrating polymer networks (IPNs) constructed with poly(vinyl alcohol) (PVA) and poly(diallyldimethyl ammonium chloride) (PDADMAC) using a sequential IPN method were prepared. The thermal characterization of the IPNs was investigated by differential scanning calorimetry (DSC), dielectric analysis (DEA), and thermogravimtric analysis (TGA). Decreases in the melting temperature of PVA segments in IPNs were observed with increasing PDADMAC content using DSC. DEA was employed to ascertain glass transition temperature of IPNs. The thermal decomposition of IPNs was investigated using TGA, and thermal decomposition of IPNs could be decelerated by changing PVA content. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1346–1349, 2003     

Rheological behavior and thermal properties of poly(butyl acrylate‐co‐2‐ethylhexyl acrylate)‐grafted vinyl chloride resin

The rheological behavior and thermal properties of a poly(butyl acrylate‐co‐2‐ethylhexyl acrylate) [P(BA‐EHA)]‐grafted vinyl chloride (VC) composite resin [P(BA‐EHA)/poly(vinyl chloride) (PVC)] and its materials were investigated. The rheological behavior, thermal stability, and Vicat softening temperature (VST) of P(BA‐EHA)/PVC were measured with capillary rheometry, thermal analysis, and VST testing, respectively. The effects of the P(BA‐EHA) content and the polymerization temperature of grafted VC on the rheological behavior of the composite resin were examined. The weight loss of the composite resin and its extracted remainder via heating were analyzed. The influence of the content and crosslinking degree of P(BA‐EHA) and the polymerization temperature of the grafted VC on VST of the materials was determined. The results indicated the pseudoplastic‐flow nature of the composite resin. The flow property of the modified PVC resin was improved because of the incorporation of the acrylate polymer. The molecular weight of PVC greatly influenced the flow behavior and VST of the composite resin and its materials. The flowability of the composite resin markedly increased, and the VST of its materials decreased as the polymerization temperature of the grafted VC increased. The initial degradation temperature of the composite resin increased as the P(BA‐EHA) content increased. The VST of the samples was enhanced a little as the content of the crosslinking agent increased in P(BA‐EHA). As expected, the composite resin, with good impact resistance, had better heating stability and flowability than pure PVC, whereas the VST of the material decreased little with increasing P(BA‐EHA) content. Therefore, P(BA‐EHA)/PVC resins prepared by seeded emulsion polymerization have excellent potential for widespread applications. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 419–426, 2005     

Thermal characteristics of interpenetrating polymer networks composed of poly(vinyl alcohol) and poly(N‐isopropylacrylamide)

Interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(N‐isopropylacrylamide) (PNIPAAm) were prepared by the sequential‐IPN method. The thermal characterization of the IPNs was investigated using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). Depression of the melting temperature (T_m) of the PVA segment in IPNs was observed with increasing PNIPAAm content using DSC. DEA was employed to ascertain the glass‐transition temperature (T_g) of IPNs. From the result of DEA, IPNs exhibited two T_g values, indicating the presence of phase separation in the IPNs. The thermal decomposition of IPNs was investigated using TGA and appeared at near 200°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 881–885, 2003     

New interpenetrating polymer networks based on uralkyd–poly(butyl methacrylate)

A study on two‐component semi‐ and full‐interpenetrating polymer networks (IPNs) of soyabean‐oil based uralkyd resin (UA) and poly(butyl methacrylate) (PBMA) synthesized by a sequential technique, has been conducted. The IPNs obtained are characterized with respect to their mechanical properties, such as tensile strength, percentage elongation and hardness (Shore A). Phase morphology has been studied by scanning electron microscopy. Glass transition studies have been carried out using differential scanning calorimetry. The thermal characterization of the IPNs was undertaken with the aid of thermogravimetric analysis. The apparent densities of these samples have been determined and are compared. The effect of the compositional variation on the above‐mentioned properties was examined. The tensile strength exhibits a sudden rise (approximately three‐fold) for the semi‐ and full‐IPNs with composition UA: PBMA 40% : 60% compared with the UA:PBMA composition of 20% : 40%. © 2001 Society of Chemical Industry     

Uralkyd and poly (butyl methacrylate) interpenetrating polymer networks

ABSTRACT:: Hydroxyl terminated alkyds synthesized from castor oil, glycerol, and different dibasic acids were used to develop uralkyds and their interpenetrating polymer networks (IPNs) with polybutyl methacrylate (PBMA). Glass transition temperature measurements gave the evidence of interpenetration. The IPNs were characterized for their physicomechanical properties and their phase morphology was studied by scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). As the concentration of the uralkyd in IPNs increases, a gradual increase in elongation, density, and swelling with a consequent decrease in the hardness were observed for all IPNs. Swelling is relatively more prominent in methyl ethyl ketone (MEK) and toluene than in water. From SEM it was observed that IPNs of PBMA‐uralkyd containing phthalic anhydride (UA‐P) as an acid part showed greater compatibility than those containing dimethyl terephthalate (UA‐D). From thermogravimetric analysis (TGA) no significant change was observed in the degradation behavior of the IPNs. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 825–832, 2000     

Electroresponsive behavior of 2‐hydroxypropyltrimethyl ammonium chloride chitosan/poly(vinyl alcohol) interpenetrating polymer network hydrogel

An interpenetrating polymer network hydrogel composed of 2‐hydroxypropyltrimethyl ammonium chloride chitosan and poly(vinyl alcohol) was prepared. Its swelling properties and electroresponsive behavior in aqueous NaCl solutions were studied. The results indicated that the water uptake ability of the hydrogel decreased with increasing ionic strength of aqueous NaCl solution. The Young's modulus, elongation at break and tensile strength of the hydrogel swollen in deionized water were 4.29 MPa, 76.5% and 3.26 MPa, respectively. The hydrogel swollen in the NaCl solution bent toward the anode under non‐contact direct current electric fields, and its bending speed and equilibrium strain increased with increasing applied voltage. The electroresponsive behavior of the hydrogel was also affected by the electrolyte concentration of external NaCl solution, and there was a critical ionic strength of 0.10 where the maximum equilibrium strain of the hydrogel occurred. By changing the direction of the applied potential cyclically, the hydrogel exhibited good reversible bending behavior. Copyright © 2011 Society of Chemical Industry     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005     

Poly(vinyl acetate)/polyacrylate semi‐interpenetrating polymer networks. II. Thermal,mechanical, and morphological characterization

The thermal, dynamic mechanical, and mechanical properties and morphology of two series of semi‐interpenetrating polymer networks (s‐IPNs) based on linear poly(vinyl acetate) (PVAc) and a crosslinked n‐butyl acrylate/1,6‐hexanediol diacrylate copolymer were investigated. The s‐IPN composition was varied with different monoacrylate/diacrylate monomer ratios and PVAc concentrations. The crosslinking density deeply affected the thermal behavior. The results showed that a more densely crosslinked acrylate network promoted phase mixing and a more homogeneous structure. The variation in the linear polymer concentration influenced both the morphology and mechanical properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Water sorption of poly(vinyl alcohol)/ poly(diallyldimethylammonium chloride) interpenetrating polymer network hydrogels

Temperature‐responsive interpenetrating polymer network (IPN) hydrogels constructed with poly(vinyl alcohol) and poly(diallyldimethylammonium chloride) using the sequential IPN method were studied. The characteristics of IPN hydrogels were investigated using the dynamic vapor sorption system. IPN hydrogels exhibited a relatively high sorption ratio, 180–360% at room temperature. The sorption ratio of hydrogels depended on temperature. Diffusion coefficients were calculated according to the Fickian Law at several temperatures. The apparent activation energy was 5.43 kJ mol^?1, which corresponds to typical diffusion processes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1389–1392, 2003     

Modification of poly(vinyl chloride) by IPN formation with poly(ethyl acrylate)

Semi‐1 and semi‐2 interpenetrating polymer networks (IPNs) of poly(vinyl chloride) (PVC) and in situ formed poly(ethyl acrylate) (PEA) have been synthesized using diallyl phthalate and ethylene glycol dimethacrylate as the crosslinkers of PVC and PEA, respectively. These two types of IPNs have been compared with respect to their physical, mechanical, and thermal properties and an endeavor has been made to find a correlation of these properties with the morphology generated in these systems. The semi‐1 IPNs displayed a decrease in their tensile strength and modulus while in contrast; the semi‐2 IPNs exhibited a marginal increase with increasing crosslinked PEA incorporation. The semi‐1 and semi‐2 IPNs containing 10 and 30 wt % of PEA displayed a two‐stage degradation typical of PVC in their thermogravimetric and DSC studies while confirming the increased stability of the samples with higher percentages of PEA. The softening characteristics as detected by the extent of penetration of the thermomechanical probe as has been detected by thermomechanical analysis are in conformity with their mechanicals. The biphasic cocontinuous systems as explicit from the morphological studies reveal fibrillar characteristics in both the systems. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

n‐Butyl acrylate based latex interpenetrating polymer networks used as processing modifiers and impact modifiers of poly(vinyl chloride)

A latex interpenetrating polymer network (LIPN), consisting of poly(n‐butyl acrylate), poly(n‐butyl acrylate‐co‐ethylhexyl acrylate), and poly(methyl methacrylate‐co‐ethyl acrylate) and labeled PBEM, with 1,4‐butanediol diacrylate as a crosslinking agent was synthesized by three‐stage emulsion polymerization. The initial poly(n‐butyl acrylate) latex was agglomerated by a polymer latex containing an acrylic acid residue and then was encapsulated by poly(n‐butyl acrylate‐co‐ethylhexyl acrylate) and poly(methyl methacrylate‐co‐ethyl acrylate). A polyblend of poly(vinyl chloride) (PVC) and PBEM was prepared through the blending of PVC and PBEM. The morphology and properties of the polyblend were studied. The experimental results showed that the processability and impact resistance of PVC could be enhanced considerably by the blending of 6–10 phr PBEM. This three‐stage LIPN PBEM is a promising modifier for manufacturing rigid PVC. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1168–1173, 2004     

Epoxy resin–poly(ethyl methacrylate) interpenetrating polymer networks: Morphology,mechanical, and thermal properties

Full (interpenetrating networks (IPNs)) and semi-IPNs of the epoxy resin and poly(ethyl methacrylate) (PEMA) were prepared by the sequential mode of synthesis. These were characterized with respect to their mechanical properties, namely, tensile strength, elongation at break, modulus, and toughness. Thermal properties were studied by differential scanning calorimetry and thermogravimetry. The morphological features were studied through scanning electron microscopy (SEM) and polarized light microscopy. The effects of variation of the blend ratios on the above-mentioned properties were examined. There was a gradual decrease of modulus and tensile strength with consequent increases in elongation at break and toughness for both types of IPNs with increases in PEMA content. The weight retentions in the thermal decomposition of both the semi-IPNs and full IPNs were higher than the epoxy homopolymer. This enhancement was presumably related to the presence of the unzipped ethyl methacrylate monomer, which acted as radical scavengers in the epoxy degradation. An inward shift and lowering (with respect to pure epoxy) of the T_g of the IPNs was observed. The polarized light microscopy exhibits bimodal distribution of particle sizes. The fractography as studied by SEM shows change in fracture mechanics from shear yielding to crazing with increasing PEMA content. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:1051–1059, 1998     

Evaluation of the effects of biobased plasticizers on the thermal and mechanical properties of poly(vinyl chloride)

Blends were prepared of poly(vinyl chloride) (PVC) with four different plasticizers; esters of aconitic, citric, and phthalic acids; and other ingredients used in commercial flexible PVC products. The thermal and mechanical properties of the fresh products and of the products after 6 months of aging were measured. Young's modulus of the PVC blends was reduced about 10‐fold by an increase in the plasticizer level from 15 to 30 phr from the semirigid to the flexible range according to the ASTM classification, but a 40‐phr level was required for PVC to retain its flexibility beyond 6 months. At the 40‐phr level, tributyl aconitate performed better than diisononyl phthalate (DINP) or tributyl citrate, in terms of lowering Young's modulus, both in the fresh materials and those aged for 6 months. The effects of the four plasticizers on the glass‐transition temperature (T_g) were similar, with T_g close to ambient temperature at the 30‐ and 40‐phr levels in freshly prepared samples and at 40–60°C in those aged for 6 months. The thermal stability of the PVC plasticized with DINP was superior among the group. Overall, tributyl aconitate appeared to be a good candidate for use in consumer products where the alleged toxicity of DINP may be an issue. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1366–1373, 2006     

Synthesis and characterization of semi‐interpenetrating networks based on poly(dimethylsiloxane) and poly(vinyl alcohol)

Semi‐interpenetrating networks (Semi‐IPNs) with different compositions were prepared from poly(dimethylsiloxane) (PDMS), tetraethylorthosilicate (TEOS), and poly(vinyl alcohol) (PVA) by the sol‐gel process in this study. The characterization of the PDMS/PVA semi‐IPN was carried out using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and swelling measurements. The presence of PVA domains dispersed in the PDMS network disrupted the network and allowed PDMS to crystallize, as observed by the crystallization and melting peaks in the DSC analyses. Because of the presence of hydrophilic (? OH) and hydrophobic (Si? (CH₃)₂) domains, there was an appropriate hydrophylic/hydrophobic balance in the semi‐IPNs prepared, which led to a maximum equilibrium water content of ～ 14 wt % without a loss in the ability to swell less polar solvents. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Mechanochemical improvement of the flame‐retardant and mechanical properties of zinc borate and zinc borate–aluminum trihydrate‐filled poly(vinyl chloride)

In this study, the effect of the high‐energy mechanical milling of a mixture of poly(vinyl chloride) (PVC) with zinc borate (ZB) or ZB–aluminum trihydrate (ATH), a mixture of ZB and ATH, on the flame‐retardant and mechanical properties of ZB and ZB–ATH filled PVC was examined. The high‐energy mechanical milling of PVC/ZB and the PVC/ZB–ATH mixture produced chemical bonding between PVC and ZB or ZB–ATH, increasing the interfacial interaction of PVC/ZB and PVC/ZB–ATH blends, which resulted in a great increase in the limiting oxygen index, the impact and yield strengths, and the elongation at break of PVC/ZB and PVC/ZB–ATH blends. The results from ultraviolet spectroscopy and gas chromatography–mass spectroscopy show that mechanochemical modification of ZB and ZB–ATH much more effectively suppressed the release of aromatic compounds in PVC/ZB and PVC/ZB–ATH blends during burning. Mechanochemical modification provided an excellent route for the improvement of the flame‐retardant and mechanical properties of flame‐retardant‐additive‐filled PVC. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 753–762, 2003     

Curing and mechanical properties of dicyanate/poly(ether sulfone) semi‐interpenetrating polymer networks

Semi‐interpenetrating polymer networks (semi‐IPNs) composed of a dicyanate resin and a poly(ether sulfone) (PES) were prepared, and their curing behavior and mechanical properties were investigated. The curing behavior of the dicyanate/PES semi‐IPN systems catalyzed by an organic metal salt was analyzed. Differential scanning calorimetry was used to study the curing behavior of the semi‐IPN systems. The curing rate of the semi‐IPN systems decreased as the PES content increased. An autocatalytic reaction mechanism was used to analyze the curing reaction of the semi‐IPN systems. The glass‐transition temperature of the semi‐IPNs decreased with increasing PES content. The thermal decomposition behavior of the semi‐IPNs was investigated. The morphology of the semi‐IPNs was investigated with scanning electron microscopy. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1079–1084, 2003     

Properties of poly(vinyl chloride) blended with an emulsion copolymer of N‐cyclohexylmaleimide and methyl methacrylate

Emulsion‐polymerized copolymers of methyl methacrylate and N‐cyclohexylmaleimide were synthesized and used for blending with poly(vinyl chloride) (PVC) to improve the heat resistance of PVC. The thermal stabilities of the blends with different copolymer contents were characterized by thermogravimetric analysis, torsional braid analysis, and the Vicat softening temperature. The mechanical properties and rheological behavior of the blends were also determined. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 201–205, 2003     

Preparation and characterization of poly(vinyl alcohol)‐poly(vinyl pyrrolidone) blend: A biomaterial with latent medical applications

Aqueous solutions of poly(vinyl alcohol) and poly(vinyl pyrrolidone) are blended and films are produced by casting method with the further intention of being used as bio‐materials with latent medical application. Glutaraldehyde, 4,4′‐diazido‐2,2′‐stilbenedisulfonic acid disodium salt tetra‐hydrate are used as crosslinker agents, whereas lactic acid is the plasticizer in the blend. The obtained films are characterized by differential scanning calorimetry (DSC), mechanical properties, swelling and solubility behavior. DSC measurements show that the blends exhibit a single glass transition temperature indicating that they are miscible, even in the presence of the plasticizer and crosslinker agents. By the combination of all mentioned additives, a relevant enhancement of the swelling is observed, accompanied by a stabilization of the solubility during the tested time. Finally, mechanical properties show an appropriate performance in the studied parameters. As a consequence, the obtained films could be suitable for use as medium or long‐term implants. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Melt grafting of n‐butyl methacrylate onto poly(vinyl chloride): Synthesis and characterization*

The graft copolymerization of n‐butyl methacrylate monomer onto compounded poly(vinyl chloride) was carried out by melt‐mixing process in a Brabender plasticorder (BPCR) using a free‐radical initiator. The reaction conditions such as initiator and monomer concentration, shear rate (rpm), residence time, and temperature were optimized in the mixing head of BPCR attached to a torque rheometer. The graft copolymers were Soxhlet extracted with cyclohexane and were characterized by intrinsic viscosity, FTIR, and ¹³C‐NMR spectroscopy. A maximum of 14% grafting was obtained. The graft copolymer showed significant improvement in processibility and both thermal and mechanical properties. Scale‐up studies of the optimized recipe were carried out in a single‐screw extruder for commercial trials/evaluation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2442–2449, 2004     

Preparation of chlorinated poly(vinyl chloride)‐g‐poly(N‐vinyl‐2‐pyrrolidinone) membranes and their water permeation properties

Chlorinated poly(vinyl chloride) (CPVC) membranes for microfiltration processes were prepared with the combined process of a solvent evaporation technique and the water‐vapor induced‐phase‐inversion method. CPVC membranes with a mean pore size of 0.7 μm were very hydrophobic. These membranes were subjected to surface modification by ultraviolet (UV)‐assisted graft polymerization with N‐vinyl‐2‐pyrrolidinone (NVP) to increase their surface wettability and decrease their adsorptive fouling. The grafting yields of the modified membranes were controlled by alteration of UV irradiation time and NVP monomer concentration. The changes in chemical structure between the CPVC membrane and the CPVC‐g‐poly(N‐vinyl‐2‐pyrrolidinone) membrane and the variation of the topologies of the modified PVC membranes were characterized by Fourier transform infrared spectroscopy, gel permeation chromatography, and field emission scanning electron microscopy. According to the results, the graft yield of the modified CPVC membrane reached a maximum at 5 min of UV exposure time and 20 vol % NVP concentration. The filtration behavior of these membranes was investigated with deionized water by a crossflow filtration measurement. The surface hydrophilicity and roughness were easily changed by the grafting of NVP on the surface of the CPVC membrane through a simultaneous irradiation grafting method by UV irradiation. To confirm the effect of grafting for filtration, we compared the unmodified and modified CPVC membranes with respect to their deionized water permeation by using crossflow filtration methods. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3188–3195, 2003