Synthesis of soluble poly(9,10-dihydrophenanthrene-2,7-diyl)s. A new class of luminescent poly(p-phenylene)s with ethylene type bridges

Poly(9,10-dihydrophenanthrene-2,7-diyl)s with -OSi(R)₂(R′) groups at the 9,10-positions were synthesized by dehalogenative polycondensation of the corresponding monomers by using a zerovalent nickel complex. They showed number average molecular weights (M_n's) of 9800-69,000 and high quantum yields (62%-quantitative) in photoluminescence. Palladium catalyzed copolymerization of 2,7-dibromo-9,10-dihydrophenanthrene having -OCH₃ or -OSi(R)₂(R′) groups at the 9,10-positions with diethynyl- or diboronic-aromatic compounds also gave photoluminescent polymers with high quantum yields.     

Synthesis and properties of polymer brush consisting of poly(phenylacetylene) main chain and poly(dimethylsiloxane) side chains

A novel polymer brush consisting of poly(phenylacetylene) (PPA) main chain and poly(dimethylsiloxane) (PDMS) side chains was synthesized by the polymerization of phenylacetylene-terminated PDMS macromonomer (M-PDMS). The macromonomer was prepared by the esterfication of monohydroxy-ended PDMS (PDMS-OH, degree of polymerization (DP) = 42) with p-ethynylbenzoic acid. The polymerization of M-PDMS using [(nbd)RhCl]₂/Et₃N catalyst led to polymer brush, poly(M-PDMS), with M_n up to 349?000 (DP of main chain 104). Poly(M-PDMS) with narrow molecular weight distribution (M_n = 39?900, M_w/M_n = 1.11) was obtained with a vinyl-Rh catalyst, [Rh{C(Ph)CPh₂}(nbd){P(4-FC₆H₄)₃}]/(4-FC₆H₄)₃P. Poly(M-PDMS)s were brown to orange viscous liquids and soluble in organic solvents such as toluene and CHCl₃. The UV-vis absorptions of poly(M-PDMS) were observed in the range of 350-525 nm, which are attributable to the PPA main chain.     

Synthesis and electrochemical capacitance of core-shell poly (3,4-ethylenedioxythiophene)/poly (sodium 4-styrenesulfonate)-modified multiwalled carbon nanotube nanocomposites

A noncovalent method was used to functionalize multiwalled carbon nanotubes with poly (sodium 4-styrene sulfonate). And then, the core-shell poly (3,4-ethylenedioxythiophene)/functionalized multiwalled carbon nanotubes (PEDOT/PSS-CNTs) nanocomposite was successfully realized via in situ polymerization under the hydrothermal condition. In the process, PSS served for not only solubilizing and dispersing CNTs well into an aqueous solution, but also tethering EDOT monomer onto the surface of CNTs to facilitate the formation of a uniform PEDOT coating. Fourier transform infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM) were used to characterize the resultant PEDOT/PSS-CNTs. In addition, the PEDOT/PSS-CNTs nanocomposite (50 wt.% PEDOT) had a specific capacitance (SC) of 198.2 F g⁻¹ at a current density of 0.5 A g⁻¹ and a capacitance degradation of 26.9% after 2000 cycles, much better than those of pristine PEDOT and PEDOT/CNTs (50 wt.% PEDOT). The enhanced electrochemical performance of the PEDOT/PSS-CNTs nanocomposite (50 wt.% PEDOT) should be attributed to the high uniform system of the nanocomposite, resulting in the large surface easily contacted by abundant electrolyte ions through the three-dimensional conducting matrix.     

Poly(N-vinylpyrrolidone)-grafted poly(N-isopropylacrylamide) copolymers: Synthesis, characterization and rapid deswelling and reswelling behavior of hydrogels

Poly(N-isopropylacrylamide)-block-poly(N-vinylpyrrolidone) diblock copolymer (PNIPAAm-b-PVPy) was successfully synthesized via sequential reversible addition-fragmentation chain transfer/macromolecular design via the interchange of xanthate (RAFT/MADIX) process, in which the chain transfer agent of xanthate was in situ afforded via the reaction of isopropylxanthic disulfide (DIP) with 2,2-azobisisobutylnitrile (AIBN). The RAFT/MADIX technique was employed to prepare the poly(N-vinylpyrrolidone)-grafted poly(N-isopropylacrylamide) copolymers (PNIPAAm-g-PVPy) with N,N-methylenebisacrylamide as the crosslinking agent. The comb-like PNIPAAm-g-PVPy copolymer networks with PVPy as the pendent chains were characterized by means of Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and small angle X-ray scattering (SAXS). The hydrogel behavior of PNIPAAm-g-PVPy networks was investigated in terms of swelling, deswelling and reswelling tests. With the inclusion of PVPy chains, the swelling ratios of the hydrogels were significantly enhanced compared to the control PNIPAAm hydrogel. It is found that the PVPy-modified PNIPAAm hydrogels displayed faster response to the external temperature changes than the control PNIPAAm hydrogel. The improved thermoresponsive properties of hydrogels are ascribed to the formation of the comb-like architectures in the copolymer networks.     

Synthesis of poly(ferrocenylsilanes) with different molecular weight and their electrochemical behavior

A series of poly(ferrocenylsilanes) (PFS) with different molecular weight have been prepared via the thermal ring‐opening polymerization of the corresponding monomers. The electrochemical behavior of poly(ferrocenyldimethylsilane) (PFDMS) and poly(ferrocenylmethylphenylsilane) (PFMPS) in solutions were investigated by cyclic voltammetry (CV). It was found that PFS could be adsorbed and electrodeposited on the Pt electrode surface, and the electroactive multilayer films formed on the Pt electrode surface influenced the shape of the voltammogram. The redox potential varied with the molecular weight slightly, and ΔE_1/2 became smaller with the increase in molecular weight. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 473–477, 2006     

Synthesis and characterization of copolymers of poly(m-xylylene adipamide) and poly(ethylene terephthalate) oligomers by melt copolycondensation

Poly(m-xylylene adipamide)/poly(ethylene terephthalate)(MXD6/PET) copolymers are synthesized by melt copolycondensation with 1–5 wt% low molecular weight PET oligomers into the MXD6 oligomers at 260 °C.FR-IR and1 H NMR analysis results indicate that the interchange reaction has occurred between MXD6 oligomers and PET oligomers. The thermal behavior of copolymers shows that the melting temperature of MXD6/PET copolymers decreases with the increasing of amount of PET oligomers, while the crystallization temperature accordingly increases. And the equilibrium temperature Tm0 is evaluated to be 251.8 °C for the copolymers with5 wt% PET oligomer adding, which is very close to that of neat MXD6. The tensile and impact strength of MXD6/PET copolymers are significantly improved than that of pure MXD6 by mechanical properties test, and the microfibril structure in the impact fracture sample's surface reveals the feature of ductile fracture.     

Effects of europium (III) acetylacetonate doping on the miscibility and photoluminescent properties of polycarbonate and poly(methyl methacrylate) blends

Blends stand out as simple and cheap materials with unique properties. The miscibility of blends formed by bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) doped with europium (III) acetylacetonate have been studied by differential scanning calorimetry (DSC), infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and photoluminescent (PL) spectroscopy. DSC studies demonstrated that undoped PC/PMMA blends obtained by precipitation method present one glass transition temperature, evidencing their apparent miscibility. FTIR spectra revealed synergic effects in the PC/PMMA system as well as the incorporation of the Eu³⁺ complex. TGA analysis suggested that the Eu³⁺ complex remains preferably in the PC micro-phase. SEM analysis showed that europium (III) acetylacetonate is homogeneously distributed within the blend and PL spectra evidenced the photoluminescence of Eu³⁺ incorporated into the blend.     

Synthesis and properties of novel poly(tetramethylsilnaphthylenesiloxane) derivatives

Novel poly(tetramethylsilnaphthylenesiloxane) derivatives were synthesized and characterized by differential scanning calorimetry (DSC), thermogravimetry (TG), and X-ray diffraction analyses. Poly(tetramethylsilnaphthylenesiloxane) derivatives were obtained by condensation polymerization of the corresponding disilanol derivatives, i.e. 1,4-, 1,5-, 2,6-, and 2,7-bis(dimethylhydroxysilyl)naphthalenes, which were prepared by the Grignard reaction using chlorodimethylsilane and the corresponding dibromonaphthalene derivatives followed by the hydrolyses, catalyzed by palladium on charcoal. The obtained poly(tetramethyl-1,5-silnaphthylenesiloxane) was insoluble in common organic solvents; however, the other polymers exhibited the good solubility in common organic solvents, such as tetrahydrofuran (THF), chloroform, dichloromethane, and toluene. The introduction of tetramethyl-1,5-silnaphthylenesiloxane units into the resulting polymer was confirmed by ¹H NMR spectrum of the copolymer obtained by condensation copolymerization of 1,5-bis(dimethylhydroxysilyl)naphthalene with 1,4-bis(dimethylhydroxysilyl)naphthalene. It was revealed from the DSC and X-ray diffraction measurements that poly(tetramethyl-1,5-silnaphthylenesiloxane) and poly(tetramethyl-2,6-silnaphthylenesiloxane) exhibited the crystallinity; however, poly(tetramethyl-1,4-silnaphthylenesiloxane) and poly(tetramethyl-2,7-silnaphthylenesiloxane) were amorphous. The glass transition temperature (T_g) and the temperature at 5% weight loss (T_d5) of poly(tetramethylsilnaphthylenesiloxane) derivatives with dimethylsilyl group at 1-position of the naphthylene moiety were higher than those at 2-position of the naphthylene moiety. The T_g and melting point (T_m) of the present polymers were higher than those of poly(tetramethyl-1,4-silphenylenesiloxane).     

Molecular dynamics simulation studies of binary blend miscibility of poly(3-hydroxybutyrate) and poly(ethylene oxide)

By means of full atomistic molecular dynamics simulation, the solubility parameters for pure poly(3-hydroxybutyrate) and poly(ethylene oxide) are calculated and the results are in agreement with the literature values. Furthermore, in order to reveal the blend property, the volume-temperature curve of the PHB/PEO blend system (1:2 blends in terms of repeated units) is simulated by employing the united atom approximation to obtain the glass transition temperature. From the volume-temperature curve, the glass transition temperature is about 258 K, which is compared well with the experimental results. It should be pointed out that the two simulated solubility parameters are similar and there is only one glass transition of the blend system, these indicate that the studied blend system is miscible.     

Synthesis and thermal characterization of poly(butylene terephthalate-co-thiodiethylene terephthalate) copolyesters

Poly(butylene terephthalate-co-thiodiethylene terephthalate) copolymers of various compositions were synthesized and characterized in terms of chemical structure and molecular weight. The thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. All the polymers under investigation show a good thermal stability. At room temperature they appear as semicrystalline materials: the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of melting temperature with respect to homopolymers. A pure crystalline phase has been evidenced at high content of butylene terephthalate or thiodiethylene terephthalate units and Baur's equation was found to describe well the T_m-composition data. Amorphous samples (containing 50-100 mol% of thiodiethylene terephthalate units) showed a monotonic decrease of T_g as the content of sulfur-containing units is increased, due to the presence of flexible C-S-C bonds in the polymeric chain. Finally, the Fox equation described well the T_g-composition data.     

Synthesis and properties of ABA-type triblock copolymers of poly(glycolide-co-caprolactone) (A) and poly(ethylene glycol) (B)

Poly(glycolide-co-caprolactone) (A)-poly(ethylene glycol) (B) ABA-type triblock copolymers (PGCE) were synthesized by bulk ring opening polymerization, using the hydroxyl endgroups of poly(ethylene glycol) (PEG) as initiator and stannous octoate as catalyst. The resulting copolymers were characterized by various analytical techniques. Gel permeation chromatographic analysis indicated that the polymerization product was free of residual monomers, PEG and oligomers. ¹H NMR and differential scanning calorimeter results demonstrated that the copolymers had a structure of poly(glycolide-co-caprolactone) (PGC) chains chemically attached to PEG segments. All the PGCE copolymers showed improved hydrophilicity in comparison with the corresponding PGC copolymers with the same molar ratio of glycolidyl and caproyl units. The microspheres of PGCE copolymer exhibited rough surfaces quite different from the smooth surface of PGC microspheres. This phenomenon was attentively ascribed to the highly swollen ability of PGCE copolymers and the freeze-drying process in the microspheres fabrication.     

Synthesis and characterization of adamantane-containing poly(enaminonitriles)

The first aliphatic bis(chlorovinylidene cyanide) monomer, 1,3-bis(1-chloro-2,2-dicyanovinyl)adamantane, has been synthesized and polymerized with appropriate diamines to give adamantane-containing aromatic-aliphatic and all aliphatic poly(enaminonitriles) (PEANs) via vinylic nucleophilic substitution polymerization. The PEANs showed excellent solubility in polar aprotic solvents and good thermal stability (10% weight loss in air > 320 °C), despite the aliphatic contents of the polymers. Solution inherent viscosities of 0.23-0.90 dL/g were obtained.Three other new PEANs containing the adamantane-based cardo group were also synthesized via vinylic nucleophilic substitution polymerization from the adamanaine-containing cardo diamine 2,2-bis[4-(4-aminophenoxy)phenyl]adamantane. The cardo PEANs showed better solubility in common organic solvents than the corresponding cardo polyamides. They also showed good thermal stabilities (10% weight loss in air > 339 °C) comparable to those of the corresponding cardo polyamides.     

Photodegradation of poly(neopentyl terephthalate)

In this paper we investigate the mechanism of photodegradation in simulated sun light (in a SUNTEST XXL+) of a polyester based on terephthalic units (poly(neopentyl terephthalate); PNT). The mechanisms of degradation were studied with MALDI-ToF MS, ATR-FTIR and SEC.     

Synthesis, characterization, and properties of poly(ethylene terephthalate)/poly(1,4-butylene succinate) block copolymers

Reactive blending at 290 °C of a series of mixtures of poly(ethylene terephthalate) (PET) and poly(1,4-butylene succinate) (PBS) led to the formation of block PET/PBS copolyesters. The block lengths of the resulting copolymers decreased with the severity of the treatment. Copolyesters with PET/PBS molar compositions of 90/10, 80/20, 70/30, and 50/50 were prepared by this method and their composition and microstructure were characterized by ¹H and ¹³C NMR, respectively. The T_g, T_m, and crystallinity of the copolymers decreased as the content in PBS and the degree of randomness increased. The elastic modulus and tensile strength of the copolymers decreased with the content of PBS, whereas, on the contrary, the elongation at break increased. The PET/PBS copolymers exhibited a pronounced hydrolytic degradability, which increased with the content in 1,4-butylene succinic units. Hydrolysis mainly occurred on the aliphatic ester groups.     

Polymer micelle-like aggregates of novel amphiphilic biodegradable poly(asparagine) grafted with poly(caprolactone)

Novel amphiphilic graft copolymers composed of poly(asparagine) (PAsn) as the hydrophilic backbone and poly(caprolactone) (PCL) as the hydrophobic segment were successfully synthesized by grafting PCL-HMDs to poly(succinimde). After tosylating PCL-diol with p-toluenesulfonylchloride (TsCl), tosylated poly(caprolactone) (PCL-OTs) was then reacted with hexamethylenediamine (HMD). The reaction of the amine terminated PCL with poly(succinimide) (PSI) and the following aminolysis resulted in poly(aspargine)-graft-poly(caprolactone) (PAsn-g-PCL). The degree of substitution (DS) and grafting reaction was confirmed by ¹³C NMR, FT-IR spectroscopy and elemental analysis. X-ray diffraction and DSC thermogram showed that the crystalline domain originated from PCL became apparent with an increase of DS. The amphiphilic comb-type graft polymer formed self-aggregates in aqueous solution when precipitated and dialysed against distilled water. Strong hydrophobic interaction of associated PCL grafts facilitated primary aggregate formation with DS, significantly reducing critical aggregation concentration and secondary aggregates also appeared in DLS measurements. Self-aggregates showed a bimodal size distribution originated from the self-aggregation and kinetically controlled particle aggregation, although the smaller primary aggregates was predominant. Spherical and dispersed aggregates of about 20 nm in diameter were observed by a transmission electron microscope.     

Synthesis and physicochemical characterization of a well-defined poly(butadiene 1,3)-block-poly(dimethylsiloxane) copolymer

For the first time, order-order and order-disorder transitions were detected and characterized in a model diblock copolymer of poly(butadiene-1,3) and poly(dimethylsiloxane) (PB-b-PDMS). This model PB-b-PDMS copolymer was synthesized by the sequential anionic polymerization (high vacuum techniques) of butadiene 1,3 (B) and hexamethylciclotrisiloxane (D₃), and subsequently characterized by nuclear magnetic resonance (¹H and ¹³C NMR), size exclusion chromatography (SEC), Fourier Transform infrared spectroscopy (FTIR), Small-Angle X-ray scattering (SAXS) and rheology. SAXS combined with rheological experiments shows that the order-order and order-disorder transitions are thermoreversible. This fact indicates that the copolymer has sufficient mobility at the timescale and at the temperatures of interest to reach their equilibrium morphologies.     

DSC and TMDSC study of melting behaviour of poly(butylene succinate) and poly(ethylene succinate)

The subsequent melting behaviour of poly(butylene succinate) (PBSU) and poly(ethylene succinate) (PES) was investigated using DSC and temperature modulated DSC (TMDSC) after they finished nonisothermal crystallization from the melt. PBSU exhibited two melting endotherms in the DSC traces upon heating to the melt, which was ascribed to the melting and recrystallization mechanism. However, one melting endotherm with one shoulder and one crystallization exotherm just prior to the melting endotherm were found for PES. The crystallization exotherm was ascribed to the recrystallization of the melt of the crystallites with low thermal stability, and the shoulder was considered to be the melting endotherm of the crystallites with high thermal stability. The final melting endotherm was ascribed to the melting of the crystallites formed through the reorganization of the crystallites with high thermal stability during the DSC heating process. TMDSC experiments gave the direct evidences to support the proposed models to explain the melting behaviour of PBSU and PES crystallized nonisothermally from the melt.     

Thermal studies of poly(carbonates) and poly(thiocarbonates) containing silicon or germanium in the main chain

The thermal properties of poly(carbonates) and poly(thiocarbonates) containing silicon or germanium in the main chan, derived from thediphenolsbis(4-hydroxy-phenyl)-dimethylsilane, bis(4-hydroxyphenyl)-dimethylgermane, bis(4-hydroxy-phenyl)-diphenylsilane and bis(4-hydroxyphenyl)-diphenylgermane, and phosgene or thiophosgene, were studied by differential scanning calorimetry and dynamic thermogravimetry. Polymers containing phenyl groups bonded to the heteroatoms showed higher Tg values, and the same was valid for those with Ge in respect to Si. Poly(carbonates) showed higher Tg values than poly(thiocarbonates). The thermogravimetric curves revealed that poly(carbonates) are more stable than poly(thiocarbonates)and the same is valid for those containing Ge with respect to the silicon-containing polymers. The kinetic parameters associated with the degradation process, showed that probably there are complex degradation mechanisms, which depend on the heteroatom in the main chain, Si or Ge, and the groups bonded to it, and the nature of the functional group, carbonate or thiocarbonate.     

Syndiotactic poly(propene-co-norbornene): Synthesis and properties at low norbornene incorporation

Copolymerizations of propene with norbornene were carried out using a syndiotactic metallocene catalyst at low initial comonomer concentrations for different polymerization times. The influence of the norbornene concentration on the catalytic activity and on the resulting material properties has been analyzed. The copolymer molecular weight decreased drastically when small amounts of norbornene were added in reactions which lasted 30 min. When longer reaction times were used the molecular weight increased with time, however living polymerization was ruled out because the polydispersity was ca. 2. The DSC measurements showed copolymers with low crystallinity or which were completely amorphous.     

Preparation of poly(β-hydroxybutyrate) and poly(lactide) hollow spheres with controlled wall thickness

In recent years, polymer microcapsules have attracted more and more attention because of their specific properties and applications in encapsulation and drug delivery. Great effort has been made to investigate the preparation methods, structure controls as well as the property designs for the polymer microcapsules. In this work, we reported an effective route for the preparation of poly(β-hydroxybutyrate) (PHB) and poly(lactic acid) (PLA) hollow spheres with controlled wall thickness, which involves the graft polymerization of the biodegradable polymers from the surface of silica spheres followed by removing the template cores. Nuclear magnetic resonance spectroscopy (NMR), thermal gravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and transmission electron microscope (TEM) have been used to prove the structure of the hollow sphere and the intermediates. The result reveals that with the increase of reaction time the wall thickness of the hollow sphere will increase gradually.