共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
3.
提出面向注塑模具的CAPP系统开发方法。即以归纳出的抽象零件而建立的工艺模板为基础,开发了基于网络 和数据库、具有企业集成层、项目管理层和工艺设计层的注塑模具CAPP系统。该系统能够满足注塑模具零件特别是非 成型零件的工艺设计要求。 相似文献
4.
5.
6.
7.
MoldFlow和Plastic Ad-visor在注射成型中的应用1.注射模具设计的传统方法与C A E技术图1和图2给出了利用传统方法设计注塑模具和利用C A E技术设计注塑模具特点和差异。从中可以看出,利用传统方法设计注塑模具,设计成功与否在很大程度上依赖设计者的经验,而且对复杂零件浇口位 相似文献
8.
9.
在进行注塑模具数控加工时,成型零件的加工极为重要,其加工质量的优劣直接影响到模具后续成型产品的质量。文章以塑料面盖注塑模成型零件之一型腔的数控加工为例,从模具零件的数控加工工艺策略、运用CAM软件编程加工的方法与技巧等方面进行了详尽的论述。 相似文献
10.
11.
Xi-Ping Li Guo-Qun Zhao Can Yang 《The International Journal of Advanced Manufacturing Technology》2014,73(5-8):639-645
In injection molding process, the mold temperature can strongly affect the fiber orientation and distribution state in plastic parts. The fiber orientation behavior is discussed, and a model is used to describe the layered structure in injection parts. By studying the injected specimens, the fiber distribution and the layered structure in the part are illustrated and a variation of the fiber distribution along with the increasing of the mold temperatures is also demonstrated. The surface morphologies of the fiber-reinforced specimens at different mold temperatures are analyzed which are used to study the effect of the mold temperature on the fiber motion process of the resultant parts. Results show that in proper mold temperature, the fibers can be completely covered in polymer matrix and the mold temperature can greatly affect the part surface quality. 相似文献
12.
13.
根椐塑料垫的结构特点,设计了由对称布置在模具内部的四组齿轮齿条斜抽芯机构、推杆推出机构等主要部分组成的四型腔单分型面注塑模。介绍了注塑模主要零件的结构设计,注塑机的选择,模具的校核和工作原理。设计的模具结构紧凑、合理,工作可靠。 相似文献
14.
Huamin Zhou Dequn Li 《The International Journal of Advanced Manufacturing Technology》2006,28(1-2):53-60
Functional parts are needed for design verification testing, field trials, customer evaluation, and production planning. By
eliminating multiple steps, the creation of the injection mold directly by a rapid prototyping (RP) process holds the best
promise of reducing the time and cost needed to mold low-volume quantities of parts. The potential of this integration of
injection molding with RP has been demonstrated many times. What is missing is the fundamental understanding of how the modifications
to the mold material and RP manufacturing process impact both the mold design and the injection molding process. In addition,
numerical simulation techniques have now become helpful tools of mold designers and process engineers for traditional injection
molding. But all current simulation packages for conventional injection molding are no longer applicable to this new type
of injection molds, mainly because the property of the mold material changes greatly. In this paper, an integrated approach
to accomplish a numerical simulation of injection molding into rapid-prototyped molds is established and a corresponding simulation
system is developed. Comparisons with experimental results are employed for verification, which show that the present scheme
is well suited to handle RP fabricated stereolithography (SL) molds. 相似文献
15.
16.
Jaehoon Lee Jinrae Cho Seongryeol Han 《Journal of Mechanical Science and Technology》2018,32(8):3645-3652
The gloss of plastic products is an important factor with which customers rapidly and directly decide the value of product. In general, these high-gloss plastic molded parts are produced through the injection molding of glass fiber-added plastic resin using a high temperature mold with the fine surfaces like glass. However, making the mold temperature higher causes the cooling time of injection molding longer, and the prolongation of cooling time leads to the extension of whole cycle of injection molding process. In order to resolve this problem, we developed a resin which makes the high-gloss injection modeling possible at low mold temperature by replacing conventional glass fiber filler with wollastonite filler. The tensile strength, flexural strain, impact strength, flow rate, gloss level and so on of the developed resin were tested with respect to the content of wollastonite. The results show that most of the properties except for the flow rate and gloss level are reduced in the newly developed resin. However, the decline in these properties was not enough to limit the use of new resins. In the gloss level test, as for the equal gloss of injection molded parts, the mold temperature for the developed resin was 30 °C lower than the mold temperature for the conventional resin. The difference of gloss between two injection molded parts using two different resins has been confirmed from the surface inspection of injection molded parts by SEM (scanning electron microscope). 相似文献
17.
为提高塑件生产质量,研究了CAE技术应用于注射模设计,论述了该技术的优点和意义;结合具体塑件,在浇注、冷却系统确定的前提下,CAE分析能够模拟注射过程,以流动、冷却和翘曲分析为例,分析结果以3D彩图形式给出,形象直观.通过应用CAE分析克服了以往只有在试模中才会发现的问题,缩短模具设计、制造周期,优化了注射模设计,提升了塑件质量. 相似文献
18.
文章叙述了扣板塑件的注射成型工艺分析,扣板模具的Pro/E模具设计、模具的虚拟装配干涉检测,模具零件加工工艺分析,复杂模具零件的数控加工程序的自动生成、加工仿真等。 相似文献
19.
为了提高注射成型模具的维修水平,对维修工艺做了深入的探索,阐述了模具在使用过程中的损坏情况,讨论了维修工艺规程的编制,分析了编制数控设备加工的程序,研究了零件维修的加工方法和维修过程中的检验,并探讨了注射成型模具的维护、保养及报废问题。 相似文献
20.
Shanmugasundaram Sankar Muthusamy Nataraj 《The International Journal of Advanced Manufacturing Technology》2011,53(1-4):1-10
This work applies modular design concepts to designating beverage-container injection molds. This study aims to develop a method of controlling costs and time in relation to mold development, and also to improve product design. This investigation comprises two parts: functionality coding, and establishing a standard operation procedure, specifically designed for beverage-container injection mold design and manufacturing. First, the injection mold is divided into several modules, each with a specific function. Each module is further divided into several structural units possessing sub-function or sub-sub-function. Next, dimensions and specifications of each unit are standardized and a compatible interface is constructed linking relevant units. This work employs a cup-shaped beverage container to experimentally assess the performance of the modular design approach. The experimental results indicate that the modular design approach to manufacturing injection molds shortens development time by 36% and reduces costs by 19??23% compared with the conventional approach. Meanwhile, the information on modularity helps designers in diverse products design. Additionally, the functionality code helps effectively manage and maintain products and molds. 相似文献