AlGaN/GaN HEMTs on SiC with f/sub T/ of over 120 GHz

AlGaN/GaN high electron mobility transistors (HEMTs) grown on semi-insulating SiC substrates with a 0.12 /spl mu/m gate length have been fabricated. These 0.12-/spl mu/m gate-length devices exhibited maximum drain current density as high as 1.23 A/mm and peak extrinsic transconductance of 314 mS/mm. The threshold voltage was -5.2 V. A unity current gain cutoff frequency (f/sub T/) of 121 GHz and maximum frequency of oscillation (f/sub max/) of 162 GHz were measured on these devices. These f/sub T/ and f/sub max/ values are the highest ever reported values for GaN-based HEMTs.     

High DC and microwave characteristics of subhalf-micrometre gate ion-implanted GaAs MESFETs using trilayer deep UV lithography

Subhalf-micrometre gate length ion-implanted GaAs MESFETs have been fabricated on 3 inch diameter substrates using trilayer deep UV lithography. Implanted MESFETs with 0.3 mu m gate lengths exhibit a maximum extrinsic transconductance of 205 mS/mm at a drain current of 600 mA/mm. From S-parameter measurements, a current gain cutoff frequency f/sub t/ of 56 GHz and a maximum available gain cutoff frequency f/sub max/ greater than 90 GHz are achieved. The gate-to-drain diode characteristics of the devices show a sharp breakdown voltage of 13-15 V. The high drain current-drain voltage and microwave characteristics indicate that ion-implanted technology with trilayer deep UV lithography has potential for the manufacture of power devices and amplifiers for Q-band communication applications. This is the first reported result using trilayer deep UV lithography to demonstrate both f/sub t/ over 56 GHz and 13-15 V gate-to-drain breakdown on 0.3 mu m gate-length ion-implanted GaAs MESFETs.<>     

High-performance 0.1-/spl mu/m In/sub 0.4/AlAs/In/sub 0.35/GaAs MHEMTs with Ar plasma treatment

High-performance 0.1-/spl mu/m In/sub 0.4/AlAs/In/sub 0.35/GaAs metamorphic high-electron mobility transistors (MHEMTs) on GaAs substrate have been successfully fabricated with Ar plasma treatment. Before the gate Schottky metallization, the devices were treated with Ar plasma, which might clean and improve the surface of exposed barrier layer. The devices fabricated with Ar plasma treatment exhibited the excellent characteristics such as 50% reduction of the reverse gate leakage currents, the improved Schottky ideality factor of 1.37, high extrinsic transconductance of 700 mS/mm, and high maximum drain current density of 780 mA/mm. And the cutoff frequency f/sub T/ as high as 210 GHz was achieved. To our knowledge, this is the best reported cutoff frequency for a 0.1-/spl mu/m MHEMT with an indium content of 35% in the channel.     

0.23 mu m gate length MODFETs on InAlAs/InGaAs/InP heterostructure grown by MOVPE

Modulation-doped field effect transistors (MODFETs) with 0.23 mu m gate lengths have been fabricated on an InAlAs/InGaAs/InP heterostructure grown by metal organic vapour phase epitaxy (MOVPE/MOCVD). Extrinsic DC transconductance as high as 800 mS/mm, and unity current gain cutoff frequency f/sub t/ of over 120 GHz at room temperature have been achieved. These g/sub m/ and f/sub t/ values compare favourably with the best devices of similar gate length grown by molecular-beam epitaxy (MBE) and are the highest values reported for any device grown by MOVPE.<>     

547-GHz f/sub t/ In/sub 0.7/Ga/sub 0.3/As-In/sub 0.52/Al/sub 0.48/As HEMTs with reduced source and drain resistance

We fabricated 30-nm gate pseudomorphic channel In/sub 0.7/Ga/sub 0.3/As-In/sub 0.52/Al/sub 0.48/As high electron mobility transistors (HEMTs) with reduced source and drain parasitic resistances. A multilayer cap structure consisting of Si highly doped n/sup +/-InGaAs and n/sup +/-InP layers was used to reduce these resistances while enabling reproducible 30-nm gate process. The HEMTs also had a laterally scaled gate-recess that effectively enhanced electron velocity, and an adequately long gate-channel distance of 12nm to suppress gate leakage current. The transconductance (g/sub m/) reached 1.5 S/mm, and the off-state breakdown voltage (BV/sub gd/) defined at a gate current of -1 mA/mm was -3.0 V. An extremely high current gain cutoff frequency (f/sub t/) of 547 GHz and a simultaneous maximum oscillation frequency (f/sub max/) of 400 GHz were achieved: the best performance yet reported for any transistor.     

DC, RF, and microwave noise performances of AlGaN/GaN HEMTs on sapphire substrates

High-performance AlGaN/GaN high electron-mobility transistors with 0.18-/spl mu/m gate length have been fabricated on a sapphire substrate. The devices exhibited an extrinsic transconductance of 212 mS/mm, a unity current gain cutoff frequency (f/sub T/) of 101 GHz, and a maximum oscillation frequency (f/sub MAX/) of 140 GHz. At V/sub ds/=4 V and I/sub ds/=39.4 mA/mm, the devices exhibited a minimum noise figure (NF/sub min/) of 0.48 dB and an associated gain (Ga) of 11.16 dB at 12 GHz. Also, at a fixed drain bias of 4 V with the drain current swept, the lowest NFmin of 0.48 dB at 12 GHz was obtained at I/sub ds/=40 mA/mm, and a peak G/sub a/ of 11.71 dB at 12 GHz was obtained at I/sub ds/=60 mA/mm. With the drain current held at 40 mA/mm and drain bias swept, the NF/sub min/,, increased almost linearly with the increase of drain bias. Meanwhile, the Ga values decreased linearly with the increase of drain bias. At a fixed bias condition (V/sub ds/=4 V and I/sub ds/=40 mA/mm), the NF/sub min/ values at 12 GHz increased from 0.32 dB at -55/spl deg/C to 2.78 dB at 200/spl deg/C. To our knowledge, these data represent the highest f/sub T/ and f/sub MAX/, and the best microwave noise performance of any GaN-based FETs on sapphire substrates ever reported.     

The effects of isoelectronic Al doping and process optimization for the fabrication of high-power AlGaN-GaN HEMTs

In order to improve the electrical characteristics of AlGaN-GaN heterostructures for applications in high electron mobility transistors (HEMTs), high-quality AlGaN-GaN was grown by way of metal-organic chemical vapor deposition on sapphire. We applied isoelectronic Al doping into the GaN-channel layers of modified AlGaN-Al-doped GaN channel-GaN heterostructures. We then compared the electrical performance of the fabricated heterostructures with those of conventional AlGaN-GaN heterostructures. The AlGaN-GaN HEMTs that were fabricated achieved power densities of up to 4.2 W/mm, some of the highest values ever reported for 0.25-/spl mu/m gate length AlGaN-GaN HEMTs. These devices exhibited a maximum drain current density of 1370 mA/mm, a high transconductance of 230 mS/mm, a short-circuit current gain cutoff frequency (f/sub T/) of 67 GHz, and a maximum frequency of oscillation (f/sub max/) of 102 GHz.     

Fabrication and characterization of 100-nm In/sub 0.53/Ga/sub 0.47/As-In/sub 0.52/Al/sub 0.48/As double-gate HEMTs with two separate gate controls

In this letter, we demonstrate successful operation of 100-nm T-gates double-gate high electron mobility transistors with two separate gate controls (V/sub g1s/ /spl ne/ V/sub g2s/). These devices are fabricated by means of adhesive bonding technique using enzocyclocbutene polymer. The additional gate enables the variation of the threshold voltage V/sub th/ in a wide range from -0.68 to -0.12V while keeping high cutoff frequency f/sub t/ of about 170 GHz and high maximum oscillation frequency f/sub max/ of about 200 GHz. These devices are considered as being very effective for millimeter-wave mixing applications and are promising devices for the fabrication of velocity modulation transistor (VMT) (Sakaki et al., 1982).     

Millimeter-wave high-power 0.25-/spl mu/m gate-length AlGaN/GaN HEMTs on SiC substrates

Reports on the CW power performance at 20 and 30 GHz of 0.25 /spl mu/m /spl times/ 100 /spl mu/m AlGaN/GaN high electron mobility transistors (HEMTs) grown by MOCVD on semi-insulating SiC substrates. The devices exhibited current density of 1300 mA/mm, peak dc extrinsic transconductance of 275 mS/mm, unity current gain cutoff (f/sub T/) of 65 GHz, and maximum frequency of oscillation (f/sub max/) of 110 GHz. Saturated output power at 20 GHz was 6.4 W/mm with 16% power added efficiency (PAE), and output power at 1-dB compression at 30 GHz was 4.0 W/mm with 20% PAE. This is the highest power reported for 0.25-/spl mu/m gate-length devices at 20 GHz, and the 30 GHz results represent the highest frequency power data published to date on GaN-based devices.     

High microwave and noise performance of 0.17-/spl mu/m AlGaN-GaN HEMTs on high-resistivity silicon substrates

AlGaN-GaN high-electron mobility transistors (HEMTs) based on high-resistivity silicon substrate with a 0.17-/spl mu/m T-shape gate length are fabricated. The device exhibits a high drain current density of 550 mA/mm at V/sub GS/=1 V and V/sub DS/=10 V with an intrinsic transconductance (g/sub m/) of 215 mS/mm. A unity current gain cutoff frequency (f/sub t/) of 46 GHz and a maximum oscillation frequency (f/sub max/) of 92 GHz are measured at V/sub DS/=10 V and I/sub DS/=171 mA/mm. The radio-frequency microwave noise performance of the device is obtained at 10 GHz for different drain currents. At V/sub DS/=10 V and I/sub DS/=92 mA/mm, the device exhibits a minimum-noise figure (NF/sub min/) of 1.1 dB and an associated gain (G/sub ass/) of 12 dB. To our knowledge, these results are the best f/sub t/, f/sub max/ and microwave noise performance ever reported on GaN HEMT grown on Silicon substrate.     

Highly linear Al/sub 0.3/Ga/sub 0.7/N-Al/sub 0.05/Ga/sub 0.95/N-GaN composite-channel HEMTs

We report an Al/sub 0.3/Ga/sub 0.7/N-Al/sub 0.05/Ga/sub 0.95/N-GaN composite-channel HEMT with enhanced linearity. By engineering the channel region, i.e., inserting a 6-nm-thick AlGaN layer with 5% Al composition in the channel region, a composite-channel HEMT was demonstrated. Transconductance and cutoff frequencies of a 1 /spl times/100 /spl mu/m HEMT are kept near their peak values throughout the low- and high-current operating levels, a desirable feature for linear power amplifiers. The composite-channel HEMT exhibits a peak transconductance of 150 mS/mm, a peak current gain cutoff frequency (f/sub T/) of 12 GHz and a peak power gain cutoff frequency (f/sub max/) of 30 GHz. For devices grown on sapphire substrate, maximum power density of 3.38 W/mm, power-added efficiency of 45% are obtained at 2 GHz. The output third-order intercept point (OIP3) is 33.2 dBm from two-tone measurement at 2 GHz.     

Self-aligned InP DHBT with f/sub /spl tau// and f/sub max/ over 300 GHz in a new manufacturable technology

We report self-aligned indium-phosphide double-heterojunction bipolar transistor devices in a new manufacturable technology with both cutoff frequency (f/sub /spl tau//) and maximum oscillation frequency (f/sub max/) over 300 GHz and open-base breakdown voltage (BV/sub ceo/) over 4 V. Logic circuits fabricated using these devices in a production integrated-circuit process achieved a current-mode logic ring-oscillator gate delay of 1.95 ps and an emitter-coupled logic static-divider frequency of 152 GHz, both of which closely matched model-based circuit simulations.     

AlGaN/GaN MIS-HFETs with f/sub T/ of 163 GHz using cat-CVD SiN gate-insulating and passivation Layers

Al/sub 0.4/Ga/sub 0.6/N/GaN heterostructure field-effect transistors (HFETs) with an AlGaN barrier thickness of 8 nm and a gate length (L/sub G/) of 0.06-0.2 /spl mu/m were fabricated on a sapphire substrate. We employed two novel techniques, which were thin, high-Al-composition AlGaN barrier layers and SiN gate-insulating, passivation layers formed by catalytic chemical vapor deposition, to enhance high-frequency device characteristics by suppressing the short channel effect. The HFETs with L/sub G/=0.06-0.2 /spl mu/m had a maximum drain current density of 1.17-1.24 A/mm at a gate bias of +1.0 V and a peak extrinsic transconductance of 305-417 mS/mm. The current-gain cutoff frequency (f/sub T/) was 163 GHz, which is the highest value to have been reported for GaN HFETs. The maximum oscillation frequency (f/sub max/) was also high, and its value derived from the maximum stable gain or unilateral gain was 192 or 163 GHz, respectively.     

Double-side planar-doped AlGaAs/InGaAs/AlGaAs MODFET with currentdensity of 1 A/mm

AlGaAs/InGaAs/AlGaAs double-side planar-doped (DSPD) pseudomorphic MODFETs of 0.3-μm gate length with both excellent DC and RF performances are reported. A maximum unilateral gain cutoff frequency of 170 GHz and a maximum current gain cutoff frequency of 60 GHz are achieved. The devices exhibit a maximum transconductance of 500 mS/mm and an extremely high current density of 1 A/mm. These are the highest frequencies reported so far for MODFET devices capable of driving 1-A/mm current density. This current density is the highest ever reported with this type of layer structure     

Microwave performance of GaAs MOSFET with wet thermally oxidized InAlP gate dielectric

This paper reports the first demonstration of a microwave-frequency operation of a GaAs MOSFET fabricated using a wet thermal oxidization of InAlP lattice-matched to GaAs to form a native-oxide gate insulator. Devices with 1-/spl mu/m gate lengths exhibit a cutoff frequency (f/sub t/) of 13.7 GHz and a maximum frequency of oscillation (f/sub max/) of 37.6 GHz, as well as a peak extrinsic transconductance of 73.6 mS/mm. A low-leakage current density of 3.8/spl times/10/sup -3/ A/cm/sup 2/ at 1-V bias for an MOS capacitor demonstrates the good insulating properties of the /spl sim/ 11-nm thick native gate oxide.     

High-performance 94-GHz single balanced mixer using 70-nm MHEMTs and surface micromachined technology

We reported 94-GHz, low conversion loss, and high isolation single balanced active gate mixer based on 70-nm gate length InGaAs/InAlAs metamorphic high-electron mobility transistors (MHEMTs). This mixer showed that the conversion loss and isolation characteristics were 2.5/spl sim/3.5 dB and under -29 dB in the range of 92.95/spl sim/94.5 GHz, respectively. The low conversion loss of the mixer is mainly attributed to the high-performance of the MHEMTs exhibiting a maximum drain current density of 607 mA/mm, an extrinsic transconductance of 1015 mS/mm, a current gain cutoff frequency (f/sub t/) of 330 GHz, and a maximum oscillation frequency (f/sub max/) of 425 GHz. High isolation characteristics are due to hybrid ring coupler which adopted dielectric-supported air-gapped microstrip line structure using surface micromachined technology. To our knowledge, these results are the best performance demonstrated from 94 GHz single balanced mixer utilizing GaAs-based HEMTs in terms of conversion loss as well as isolation characteristics.     

Enhanced microwave performance of ion-implanted MESFET with graded GaAs/AlGaAs heterojunctions

Ion-implanted MESFETs have been fabricated on an inverted GaAs/AlGaAs heterostructure. The aluminium concentration in the AlGaAs is graded from 0% at the substrate to 30% at the heterointerface. A maximum extrinsic transconductance of 410 mS/mm is achieved with 0.5 mu m gate devices. This heterojunction ion-implanted FET (HIFET) also exhibits enhanced microwave performance, especially at low drain current, when compared to conventional ion-implanted GaAs MESFETs. At 20% of I/sub dss/, the current gain cutoff frequency f/sub t/ is 40 GHz, which increases up to a maximum value of 47 GHz as the drain current rises. These characteristics of high f/sub t/ and high gain at low current are advantageous for low-noise applications.<>     

High-performance enhancement-mode AlGaN/GaN HEMTs using fluoride-based plasma treatment

We report a novel approach in fabricating high-performance enhancement mode (E-mode) AlGaN/GaN HEMTs. The fabrication technique is based on fluoride-based plasma treatment of the gate region in AlGaN/GaN HEMTs and post-gate rapid thermal annealing with an annealing temperature lower than 500/spl deg/C. Starting with a conventional depletion-mode HEMT sample, we found that fluoride-based plasma treatment can effectively shift the threshold voltage from -4.0 to 0.9 V. Most importantly, a zero transconductance (g/sub m/) was obtained at V/sub gs/=0 V, demonstrating for the first time true E-mode operation in an AlGaN/GaN HEMT. At V/sub gs/=0 V, the off-state drain leakage current is 28 /spl mu/A/mm at a drain-source bias of 6 V. The fabricated E-mode AlGaN/GaN HEMTs with 1 /spl mu/m-long gate exhibit a maximum drain current density of 310 mA/mm, a peak g/sub m/ of 148 mS/mm, a current gain cutoff frequency f/sub T/ of 10.1 GHz and a maximum oscillation frequency f/sub max/ of 34.3 GHz.     

GaAs MOSFET with oxide gate dielectric grown by atomic layer deposition

For the first time, a III-V compound semiconductor MOSFET with the gate dielectric grown by atomic layer deposition (ALD) is demonstrated. The novel application of the ALD process on III-V compound semiconductors affords tremendous functionality and opportunity by enabling the formation of high-quality gate oxides and passivation layers on III-V compound semiconductor devices. A 0.65-/spl mu/m gate-length depletion-mode n-channel GaAs MOSFET with an Al/sub 2/O/sub 3/ gate oxide thickness of 160 /spl Aring/ shows a gate leakage current density less than 10/sup -4/ A/cm/sup 2/ and a maximum transconductance of 130 mS/mm, with negligible drain current drift and hysteresis. A short-circuit current-gain cut-off frequency f/sub T/ of 14.0 GHz and a maximum oscillation frequency f/sub max/ of 25.2 GHz have been achieved from a 0.65-/spl mu/m gate-length device.     

Influences of sulfur passivation on temperature-dependent characteristics of an AlGaAs/InGaAs/GaAs PHEMT

The influences of (NH/sub 4/)/sub 2/S/sub x/ treatment on an AlGaAs/InGaAs/GaAs pseudomorphic high electron mobility transistor (PHEMT) are studied and demonstrated. Upon the sulfur passivation, the studied device exhibits better temperature-dependent dc and microwave characteristics. Experimentally, for a 1/spl times/100 /spl mu/m/sup 2/ gate/dimension PHEMT with sulfur passivation, the higher gate/drain breakdown voltage of 36.4 (21.5) V, higher turn-on voltage of 0.994 (0.69) V, lower gate leakage current of 0.6 (571) /spl mu/A/mm at V/sub GD/=-22 V, improved threshold voltage of -1.62 (-1.71) V, higher maximum transconductance of 240 (211) mS/mm with 348 (242) mA/mm broad operating regime (>0.9g/sub m,max/), and lower output conductance of 0.51 (0.53) mS/mm are obtained, respectively, at 300 (510) K. The corresponding unity current gain cutoff frequency f/sub T/ (maximum oscillation frequency f/sub max/) are 22.2 (87.9) and 19.5 (59.3) GHz at 250 and 400 K, respectively, with considerably broad operating regimes (>0.8f/sub T/,f/sub max/) larger than 455 mA/mm. Moreover, the relatively lower variations of device performances over wide temperature range (300/spl sim/510 K) are observed.