[NH3(CH2)2NH3][Co(SO4)2(H2O)4]: Chemical preparation, crystal structure, thermal decomposition and magnetic properties

Cobalt ethylenediammonium bis(sulfate) tetrahydrate, [NH₃(CH₂)₂NH₃][Co(SO₄)₂(H₂O)₄], has been synthesised by slow evaporation at room temperature. It crystallises in the triclinic system, space group , with the unit cell parameters: a = 6.8033(2), b = 7.0705(2), c = 7.2192(3) Å, α = 74.909(2)°, β = 72.291(2)°, γ = 79.167(2)°, Z = 1 and V = 317.16(2) Å³. The Co(II) atom is octahedrally coordinated by four water molecules and two sulfate tetrahedra leading to trimeric units [Co(SO₄)₂(H₂O)₄]. These units are linked to each other and to the ethylenediammonium cations through OW-H…O and N-H…O hydrogen bonds, respectively. The zero-dimensional structure is described as an alternation between cationic and anionic layers along the crystallographic b-axis. The dehydration of the precursor proceeds through three stages leading to crystalline intermediary hydrate phases and an anhydrous compound. The magnetic measurements show that the title compound is predominantly paramagnetic with weak antiferromagnetic interactions.     

Growth and characterization of (SnS2)x-(SnSe2)1−x mixed crystals

(SnS₂)_x-(SnSe₂)_1−x layered crystals were grown using the vertical Bridgman technique for x=0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.9, 1.0. IR-spectra of these compounds were obtained using a Bruker-spectrometer. The structural properties were studied using transmission electron microscopy (TEM). The variation of the structural and optical properties was studied as a function of the composition x.     

Inorganic phosphate crystal Na15−n[Al(PO4)2F2]3−n[Ti(PO4)2F2]n (0 ≤ n < 1): A novel cation exchanger with high exchange selectivity for Li and Pb ions

A series of inorganic phosphate crystals have been hydrothermally synthesized, which have high chemical stability and can keep their crystal structure after acid/base treatments. Its cation-exchange properties have been investigated and the results show that it is an excellent ion exchanger with high exchange capacities for H⁺, Li⁺ and Pb²⁺ ions (12.74, 6.98 and 3.92 mequiv./g, respectively). Selective extractions of Li⁺ and Pb²⁺ from the synthetic mixtures containing (Li⁺, Sr⁺, K⁺, Mg²⁺, Ca²⁺ and Ba²⁺) and (Pb²⁺, Ca²⁺, Ba²⁺, Co²⁺, Ni²⁺, Zn²⁺ and Mg²⁺) have been observed. The reasons of the high exchange selection of NATP for Li⁺ and Pb²⁺ ions have been discussed.     

Phase transitions, structure and ion conductivity of zirconium hydrogen phosphates, H1±XZr2−XMX(PO4)3·H2O (M = Nb, Y)

Structure transformations and proton conductivity of hydrogen zirconium phosphates with the NASICON structure, H_1±XZr_2−XM_X(PO₄)₃·H₂O (X = 0, 0.02 and 0.1, M = Nb, Y), were studied by X-ray powder diffraction, calorimetry, IR- and impedance spectroscopy. Substitution of zirconium by niobium leads to decrease of the lattice parameters, while yttrium doping leads to their increase. H_0.9Zr_1.9Nb_0.1(PO₄)₃ structure was determined at 493 and 733 K. This phase crystallizes in rhombohedral space group with lattice parameters a = 8.8564(5) Å, c = 22.700(1) Å at 493 K and a = 8.8470(2) Å, c = 22.7141(9) Å at 733 K. The a parameter and lattice volume were found to decrease with temperature increasing. Structure transformations upon heating are caused mainly by the decrease of the M1 site and C cavities. Ion conductivity of obtained materials was found to increase in humid atmosphere. Activation energies of conductivity were calculated. Rhombohedral-triclinic phase transition found by X-ray powder diffraction was proved by calorimetry data. According to XRD and IR spectroscopy data hydrogen bond in HZr₂(PO₄)₃ was found to be weaker than in hydrated material.     

Lead nitroprusside: A new precursor for the synthesis of the multiferroic Pb2Fe2O5, an anion-deficient perovskite

In order to investigate the formation of multiferroic oxide Pb₂Fe₂O₅, the thermal decomposition of Pb[Fe(CN)₅NO] has been studied. The complex precursor and the thermal decomposition products were characterized by IR and Raman spectroscopy, thermal analysis, powder X-ray diffraction (PXRD), scanning electron microscopy and magnetic measurements. The crystal structure of Pb[Fe(CN)₅NO] was refined by Rietveld analysis. It crystallizes in the orthorhombic system, space group Pnma. The thermal decomposition in air produces highly pure Pb₂Fe₂O₅ as final product. This oxide is an anion deficient perovskite with an incommensurate superstructure. The magnetic measurements confirm that Pb₂Fe₂O₅ shows a weak ferromagnetic signal probably due to disorder in the perfect antiferromagnetic structure or spin canting. The estimated ordering temperature from the fit of a phenomenological model was 520 K. The SEM images reveal that the thermal decomposition of Pb[Fe(CN)₅NO] produces Pb₂Fe₂O₅ with small particle size.     

Reinvestigation of the binary diagram Na3PO4-FePO4 and crystal structure of a new iron phosphate Na3Fe3(PO4)4

A new iron(III) phosphate Na₃Fe₃(PO₄)₄ has been synthesized and characterized. It decomposes before melting at 860°C into FePO₄ and Na₃Fe₂(PO₄)₃. The structure of the compound was determined by single-crystal X-ray diffraction. The unit cell is monoclinic with the following parameters: a=19.601(8) Å, b=6.387(1) Å, c=10.575(6) Å and β=91.81(4)°; Z=4; space group: C2/c. Na₃Fe₃(PO₄)₄ exhibits a layered structure involving corner-linkage between FeO₆ octahedra, and corner- and edge-sharing between FeO₆ octahedra and PO₄ tetrahedra. The Na⁺ cations occupying the interlayer space are six- and seven-fold coordinated by oxygen atoms. The relationship between the structure of Na₃Fe₃(PO₄)₄ and the previous reported hydrate K₃Fe₃(PO₄)₄·H₂O will be discussed.     

Visible quantum cutting via downconversion in a novel green-emitting K2Gd(WO4)(PO4):Tb phosphor

A novel phosphor K₂Gd(WO₄)(PO₄):Tb was prepared via a solid-state reaction. The crystal structure of K₂Gd(WO₄)(PO₄) as a new host matrix for luminescence was defined to be the orthorhombic system with space group Ibca (73). Visible quantum cutting under Tb³⁺ 4f⁸–4f⁷5d¹ excitation and host excitation in K₂Gd(WO₄)(PO₄):Tb³⁺ via a downconversion was identified. In order to rationalize the quantum cutting effect, the proper mechanism was proposed. According to calculations, the quantum efficiency was up to 183.2% and 176.4% under excitation at 235 nm and 150 nm, respectively. When compared with Zn₂SiO₄:Mn²⁺ (P1-G1S), KGWP:0.5Tb³⁺ is slightly less bright over 450–650 nm but has a shorter decay time.     

Correlation between structure and photoluminescence of the europium doped glaserite-type phosphate Na2SrMg(PO4)2

A new phosphate Na₂SrMg(PO₄)₂ has been synthesized and investigated by X-ray diffraction, DTA, ³¹P NMR spectroscopy and photoluminescence measurements. This compound crystallizes in the space group P2₁/a of the monoclinic system with the cell parameters: a = 9.158(1) Å, b = 5.267(1) Å, c = 13.498 (1) Å, β = 90.01(1)° and four formula units per cell. Its structure is closely related to that of the mineral glaserite K₃Na(SO₄)₂ and thus it can be described by the general formula XY₂M(TO₄)₂. The X, Y, M and T sites are fully occupied by Sr²⁺, Na⁺, Mg²⁺ and P⁵⁺ cations, respectively. The anionic framework is consisted by the stacking along the [001] direction of two kinds of alternating [MgP₂O₈⁴⁻]_∞ mixed layers parallel to the (a, b) plane and resulting from a corner-sharing between MgO₆ octahedra and PO₄ tetrahedra. The Sr²⁺ cations are located within the interlayer space, while those Na⁺ are found in large cavities bounded to the layers. The DTA analysis showed a congruent melting of this compound at 1374 K. The ³¹P NMR spectroscopy confirmed the presence of two distinct phosphors sites in the structure. Optical studies were performed on the Na₂SrMg(PO₄)₂ compound doped with Eu³⁺ and Eu²⁺. The trivalent europium was used as a local probe, replacing strontium and sodium, what gives complementary and consistent results to the crystallographic analyses. The divalent europium was used to analyze preliminary the potentiality for this compound to be integrated as phosphor in Light Emitting Diode (LED).     

Spectral properties of Tm:NaGd(MoO4)2 crystal

The Tm³⁺:NaGd(MoO₄)₂ crystal with dimensions of Φ 15 × 38 mm² was grown by Czochralski method. Polarized absorption and fluorescence spectra at room temperature were investigated. The absorption bands attributed to ³H₆ → ³H₄ transition have large absorption cross-sections, which are 3.99 × 10⁻²⁰ and 2.36 × 10⁻²⁰ cm² for σ- and π-polarization, respectively. The emission bands corresponding to the ³H₄ → ³H₆ transition are strong and broad with emission cross-sections of 1.33 × 10⁻²⁰ and 1.20 × 10⁻²⁰ cm² for σ- and π-polarization, respectively. The correlative full widths at half maximum are 35 nm for σ-polarization and 36 nm for π-polarization. The fluorescence lifetime for the ³H₄ → ³F₄ transition is 146 μs and the luminescent quantum efficiency is 76.8%.     

Flower-like microparticles and novel superparamagnetic properties of new binary Co1/2Fe1/2(H2PO4)2·2H2O obtained by a rapid solid state route at ambient temperature

A new binary Co_1/2Fe_1/2(H₂PO₄)₂·2H₂O was synthesized by a simple, rapid and cost-effective method using CoCO₃-Fe(c)-H₃PO₄ system at ambient temperature. Thermal treatment of the obtained Co_1/2Fe_1/2(H₂PO₄)₂·2H₂O at 600 °C yielded as a binary cobalt iron cyclotetraphosphate CoFeP₄O₁₂. The FTIR and XRD results of the synthesized Co_1/2Fe_1/2(H₂PO₄)₂·2H₂O and its final decomposed product CoFeP₄O₁₂ indicate the monoclinic phases with space group P2₁/n and C2/c, respectively. The particle morphologies of both binary metal compounds appear the flower-like microparticle shapes. Room temperature magnetization results show novel superparamagnetic behaviors of the Co_1/2Fe_1/2(H₂PO₄)₂·2H₂O and its final decomposed product CoFeP₄O₁₂, having no hysteresis loops in the range of ±10,000 Oe with the specific magnetization values of 0.045 and 12.502 emu/g at 10 kOe, respectively. The dominant physical properties of the obtained binary metal compounds (Co_1/2Fe_1/2(H₂PO₄)₂·2H₂O and CoFeP₄O₁₂) are compared with the single compounds (M(H₂PO₄)₂·2H₂O and M₂P₄O₁₂; where M = Co, Fe), indicating the presence of Co ions in substitution position of Fe ions.     

Evaluation of enthalpy of sublimation of Zr(tmhd)4 by using thermogravimetric transpiration method

The metallo-organic chemical vapour deposition (MOCVD) of ZrO₂ films is promising in various technological fields. Zr(tmhd)₄, tetrakis(2,2,6,6-tetramethyl-3,5-heptanedionato)zirconium(IV), has been identified as an ideal precursor. The thermal stability and complete volatility of the synthesized zirconium precursor were inferred from the thermogravimetric analysis. The monomeric structure of the complex was confirmed by electron spray-ionization mass spectroscopy. The vapour pressure measurement was carried out by TG-based transpiration technique and the enthalpy of sublimation was calculated from the slope of Clausius-Clapeyron equation. This yielded a value of 85.36 (± 3.60) kJ mol^− 1 for the standard enthalpy of sublimation over the temperature span of 411-463 K.     

Temperature anomalies of DEA-CuCl4 and TEA-CoCl2Br2/PMMA nanocomposites

Phase transitions were studied for the new synthesized ferroic (NH₂(C₂H₅)₂CuCl₄ (DEA-CuCl₄) and (NH₂(C₂H₅)₄CoCl₂Br₂ (TEA-CoCl₂Br₂) nanocrystallites (NC) incorporated into polymer matrices. Comparison with the bulk crystals is performed. A giant temperature shift (from 305.1°C to 360.3°C) of onset temperature for TEA-CoCl₂Br₂ nanoparticles after their incorporation into the PMMA matrix was found and is substantially larger compared to the DEA-CuCl₄. The DSC analysis shows that the temperature of phase transition is crucially dependent on the thermocycling and temperature rate. The principal role of the nano-sized effects is shown.     

Enhancement of red emission intensity of Ca9Y(VO4)7:Eu phosphor via Bi co-doping for the application to white LEDs

The present investigation aims at the luminescence properties of Ca₉Y(VO₄)₇:Eu³⁺, Bi³⁺ red phosphor materials. The red emission at 613 nm originating from ⁵D₀–⁷F₂ transition of Eu³⁺ in Ca₉Y(VO₄)₇ is enhanced strongly with Bi³⁺–V⁵⁺ couple as the sensitizer, under excitation either into the ⁵L₆ state or the ⁵D₂ state. The energy transfer from Bi³⁺–V⁵⁺ to Eu³⁺ is discussed. For a fixed Eu³⁺ concentration, there is an optimal Bi³⁺ concentration with 15 mol%, at which the maximum luminescence intensity of Eu³⁺ is achieved. The red emission of Ca₉Y(VO₄)₇:0.8Eu³⁺, 0.15Bi³⁺ (under 395 nm and 465 nm excitations) is stronger than that of commercial Y₂O₃:Eu³⁺ phosphor (under 395 nm and 467 nm excitations). Based on the ratios of the red emission at 613 nm to orange one at 592 nm, it is considered that the symmetry of Eu³⁺ site decreases with doping of Bi³⁺, leading to more opposite parity components. Lifetime and diffuse reflection spectra measurements indicate that the red emission enhancement is due to the enhanced transition probabilities from the ground state to ⁵L₆ and ⁵D₂ states of Eu³⁺ in the distorted crystal field. Therefore the present material is a promising red-emitting phosphor for white-light diodes with near-ultraviolet/blue GaN-based chips.     

Structural and thermochemical properties, and energetics of C8(NO2)8 and C20(NO2)4n (n = 0–4)

Density-functional-theory calculations, at the B3LYP level with the 6–31 G basis set, have been performed to investigate the structural and electronic properties of octanitrocubane, C₈(NO₂)₈, and polynitrofullerenes of type C₂₀(NO₂)_4n, with n = 0–4, in their ground states. Having determined their energetically optimized geometric structures, energetics, and vibrational frequencies, we have calculated the enthalpies of combustion and decomposition of these molecules. Extrapolating from the so-obtained data, we have also estimated, as a by-product, the enthalpy values of C₂₀(NO₂)₂₀.     

A modified model for calculating lattice thermal expansion of I2-IV-VI3 and I3-V-VI4 tetrahedral compounds

A general empirical formula was found for calculating lattice thermal expansion for compounds having their properties extended for compound groups having different mean ionicity as well as more than one type of cation atoms with that of different numbers of them such as I₂-IV-VI₃ and I₃-V-VI₄. The difference in the valence electrons for cations and anions in the compound was used to correlate the deviations caused by the compound ionicity. The ionicity effects, which are due to their different numbers for their types, were also added to the correlation equation. In general, the lattice thermal expansion for a compound semiconductor can be calculated from a relation containing melting point, mean atomic distance and number of valence electrons for the atoms forming the compound. The mean ionicity for the group compounds forming I₂-IV-VI₃ was found to be 0.323 and 0.785 for the ternary group compounds of I₃-V-VI₄.     

The synthesis and selected properties of new compounds: Mg3Fe4(VO4)6 and Zn3Fe4(VO4)6

New compounds: Mg₃Fe₄(VO₄)₆ and Zn₃Fe₄(VO₄)₆ were obtained from a solid state reaction. The temperatures of melting of Mg₃Fe₄(VO₄)₆ and Zn₃Fe₄(VO₄)₆ amount to 950±5 and 850±5°C, respectively. The indexing results and the calculated unit cell parameters for both compounds are given and suggest that both phases are isotypic with Mn₃Fe₄(VO₄)₆. The IR spectra of the above-mentioned compounds are presented.     

Single crystalline Co3O4: Synthesis and optical properties

Crystals of Co₃O₄ have been prepared from thermal decomposition of molecular precursors derived from salicylic acid and cobalt (II) acetate or chloride at 500 °C. A cubic phase Co₃O₄ micro- and nanocrystals have been obtained. The as-synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM). The images of electron microscopes showed octahedral crystals of Co₃O₄. The volume and polarizability of the optimized structures of molecular precursors have been calculated and related to the particle size. The optical band gap of the obtained crystals has been measured. The results indicated two optical band gaps with values 2.65 and 2.95 eV for (E_g1) (E_g2), respectively.     

Phase transitions and ionic mobility in hydrogen zirconium phosphates with the NASICON structure, H1±XZr2−XMX(PO4)3·H2O, M = Nb, Y

Phase transitions and the mobility of proton-containing groups in hydrogen zirconium phosphate HZr₂(PO₄)₃·nH₂O with the NASICON structure were studied by X-ray powder diffraction, ¹H, ³¹P NMR, IR spectroscopy and TG analysis. Heating HZr₂(PO₄)₃·H₂O above 420 K results in dehydration and in a rhombohedral-triclinic phase transition. Continued heating to about 490 K results in the thermal activation of cation disordering and phase transition of HZr₂(PO₄)₃ from triclinic to rhombohedral phase. Parameter “a” of HZr₂(PO₄)₃ lattice decreases during the heating. It is shown that oxonium ions in HZr₂(PO₄)₃·H₂O are characterized by high rotation and translation mobility. Rotation mobility of oxonium ions can be increased by the substitution of zirconium by yttrium or niobium.     

Thermoelectric properties of Zn4Sb3 prepared by hot pressing

Polycrystalline specimens of the thermoelectric material Zn₄Sb₃ were prepared by the hot-pressing method at various temperatures and pressures and their thermoelectric properties were evaluated in a temperature range from 298 K to 673 K. A single phase of Zn₄Sb₃ was obtained in the samples prepared at 673 K with a pressure above 150 MPa, whereas ZnSb was placed in the Zn₄Sb₃ matrix for the samples prepared at 100 MPa. The electrical transport properties of the single phase compound showed p-type conduction and metallic transport behavior based on the temperature dependence. The sample produced at 673 K under a pressure of 200 MPa exhibited the highest ZT value of 1.36 at 673 K. This study suggests that the dense and single-phase Zn₄Sb₃ compound is a route to achieve a high thermoelectric performance.     

Hydrothermal synthesis, characterization and magnetic properties of (N4C6H21)·(Co(H2PO4)(HPO4)2)

The title compound, (N₄C₆H₂₁)·(Co(H₂PO₄)(HPO₄)₂), was prepared hydrothermally (473 K, 10 days, autogenous pressure), in the presence of the tris(2-aminoethyl)amine as organic template. Its structure is built up from a network of four membered-rings, formed by the vertex linkages between [CoO₄] and [H₂PO₄] tetrahedra with [HPO₄] moieties hanging from the Co center. Hydrogen bonds involving the cobalt phosphate units and the triply protonated amine molecule, contribute to the stability of the structure. The IR spectrum shows bands characteristic of the (N₄C₆H₂₁)³⁺ cations and the (H₂PO₄)⁻ and (HPO₄)²⁻ phosphate anions. The UV-Visible-NIR spectrum confirms the tetrahedral coordination of Co²⁺ ions. The TGA analysis indicates that the dehydration of (N₄C₆H₂₁)·(Co(H₂PO₄)(HPO₄)₂) occurs in one step. Magnetic measurements from 4.5 to 305 K show a weak antiferromagnetic character of this compound.