Carbon nanorod supported metal alloy nanocubes using polydopamine as location reagent for water splitting

Transition metal catalysts were supposed to be the most likely substitute for commercial noble metal catalysts, and the development of highly active and long-term catalyst for water splitting are the future trend. Herein, Ni rectangular nitrogen doped carbon nanorods@Fe–Co nanocubes (Ni-CNRs@Fe–Co cubes) were fabricated via a facile template-free method. This simple strategy not only realizes the structure tailoring, but also achieves high-quality nitrogen-doping. Specifically, nickel dimethylglyoxime [Ni(dmg)₂] with rectangular rodlike structure was firstly synthesized by solution method, then metal-organic frameworks Fe–Co nanocube with different contents were loaded on rectangular carbon nanorods with polydopamine as the locating and the connecting agent, and finally Ni-CNRs@xFe-Co cubes were obtained by a one-step calcination. A series of electrochemical tests were researched on materials with different metal contents in the 1 M KOH solution. The Ni-CNRs@Fe–Co cubes show excellent electrocatalytic activity in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). For HER and OER, the Tafel slopes were 83.3 mV dec⁻¹ and 71 mV dec⁻¹, the onset potential were −167 mV and 1.62 V, and reached the current densities of 10 mA cm⁻², the overpotential just needed 196 mV and 433 mV, respectively. This novel synthetic strategy will provide a template-free way for cheap electrocatalysts of non-precious metal for OER and HER.     

Trimetallic PdCuIr nanocages as efficient bifunctional electrocatalysts for polyalcohol oxidation and hydrogen evolution reaction

Despite amounts of researches in recent years, it is still desirable but challenging to fabricate well-defined bifunctional catalysts with high performance towards alcohol oxidation and hydrogen evolution reaction (HER). Herein, a unique trimetallic PdCuIr catalyst with a nanocage (NC) structure is synthesized to be an excellent bifunctional catalyst by a seed-mediated growth strategy. The as-prepared PdCuIr NC catalyst exhibits remarkably enhanced mass activity and durability towards glycerol oxidation reaction (GOR) and ethylene glycol oxidation reaction (EGOR) as compared with commercial Pd/C catalyst. The optimal Pd₅₈Cu₃₂Ir₁₀ NCs show electrocatalytic activities of 2565.79 mA mg_Pd⁻¹ and 4498.30 mA mg_Pd⁻¹ for GOR and EGOR, respectively. Meanwhile, the well-defined PdCuIr NC catalyst also displays outstanding electrocatalytic performance for HER, and the overpotential of Pd₅₈Cu₃₂Ir₁₀ NCs only requires 54 mV to arrive at a current density of 10 mA cm⁻², along with excellent electrochemical durability. The enhancement of electrocatalytic properties is attributed to the introduction of Cu and Ir atoms, which could modify the electronic structure of Pd to optimize the adsorption of reactants and intermediates. Moreover, the unique NC structure also significantly increases the number of reaction active sites as well as accelerates mass transport. Following this method, the trimetallic PdCuRu NCs and PdCuRh NCs are also synthesized. This work not only offers a general strategy for the fabrication of well-defined ternary alloy nanocatalysts, but also presents an advanced class of bifunctional catalysts for polyalcohol electrooxidation and HER.     

Spherical Co/Co9S8 as electrocatalyst for hydrogen production from alkaline solution and alkaline seawater

Cobalt-based sulfide catalysts are considered as potential materials for electrocatalytic hydrogen production from seawater. Here, we have successfully prepared a Co/Co₉S₈ electrocatalyst with hollow spherical structure. As-prepared material exhibited excellent electrocatalytic activity in hydrogen evolution reaction (HER) in alkaline seawater. The overpotentials for Co/Co₉S₈ in alkaline seawater were measured as low as 136.2 mV, when reached a current density of 10 mA cm^{− 2}. It also had good stability and could be maintained for 24 h in 1.0 M KOH and alkaline seawater. The results of SEM and TEM confirmed that the catalyst had excellent reaction structure. Due to the hollow structure, Co/Co₉S₈ showed remarkable catalytic performance for HER. The construction method of Co/Co₉S₈ hollow structure is an effective strategy to improve the performance of HER for seawater splitting.     

Copper induced phosphide for enhanced electrochemical hydrogen evolution reaction

Research on highly efficient catalysts for electrochemical hydrogen evolution reaction (HER) remains a challenge. In this work, we successfully wrap copper (Cu) inside of copper phosphide (Cu₃P) nanoparticle to form a copper/copper phosphide (Cu/Cu₃P) core/shell structure attached on carbon nanotubes (CNTs) for enhanced HER activity in acid. The average size of the core/shell particles is around 25 nm, with about 5 nm of Cu₃P as the outer layer. The catalytic activity of the core/shell structure is significantly promoted compared to the metallic Cu and Cu₃P pure phases nanoparticles on CNTs, requiring overpotentials of 84 and 161 mV to achieve 10 and 100 mA cm⁻² of current density, respectively. The core/shell structure also presents high HER durability and stability, with the polarization curve overlapped after 5000 cycles of CVs and steady current density at 25 mA cm⁻² for as long as 10 h. To account for the promoted HER performance, the Cu/Cu₃P structure is fully investigated by physical and electrochemical characterizations and density functional theory (DFT) calculations. The DFT results depict that the neutralized the adsorption Gibbs free energy of hydrogen atoms (ΔG_H1) is induced by the electronic interactions between metallic Cu and phosphide phase.     

Cu–Co–P electrodeposited on carbon paper as an efficient electrocatalyst for hydrogen evolution reaction in anion exchange membrane water electrolyzers

To solve the issues of energy shortage and environmental pollution, it is essential to develop highly effective catalysts for hydrogen evolution reaction (HER) in water electrolysis. Herein, we report a facile and rapid fabrication of a Cu–Co–P catalyst on a carbon paper (CP) substrate using electrodeposition. First, the deposition conditions for Co–P/CP were optimized. The prepared Co–P consisted of numerous spheres and exhibited acceptable catalytic activity towards HER in an alkaline medium with an overpotential of 72 mV at current density of ?10 mA/cm². Further performance enhancement was achieved by the incorporation of Cu to modify the electronic structure of the Co–P catalyst. In a half-cell test, the optimized Cu–Co–P/CP exhibits remarkable performance, achieving ?10 mA/cm² at an overpotential of 59 mV, and the Tafel slope is 38 mV/dec. In a single-cell test, an anion exchange membrane water electrolyzer with a Cu–Co–P/CP cathode and commercial IrO₂/CP anode exhibited high current density of 0.70 A/cm² at 1.9 V_cell.     

Bimetallic metal-organic framework derived electrocatalyst for efficient overall water splitting

The development of bifunctional catalysts that can be applied to both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is widely regarded as a key factor in the production of sustainable hydrogen fuel by electrochemical water splitting. In this work, we present a high-performance electrocatalyst based on nickel-cobalt metal-organic frameworks for overall water splitting. The as-obtained catalyst shows low overpotential to reaches the current density of 10 mA cm⁻² with 249 mV for OER and 143 mV for HER in alkaline media, respectively. More importantly, when the electrolyzer was assembled with the as-prepared catalyst as anode and cathode simultaneously, it demonstrates excellent activity just applies a potential of 1.68 V to achieve 10 mA cm⁻² current density for overall water splitting.     

Synergistic effects of Mo2C/CeO2 nanoparticles anchored on nitrogen-doped carbon as an efficiently electrocatalyst for hydrogen evolution reaction

As a catalyst, Mo₂C has excellent hydrogen evolution reaction (HER) performance due to its platinum-like structure. However, insufficient exposure of active sites and excessive Mo–H binding energy of single Mo₂C catalyst limits the improvement of HER performance. In this work, a nitrogen-doped porous carbon anchored Mo₂C and CeO₂ nanoparticles (Mo₂C/CeO₂/NC) for HER was manufactured by utilizing electronic fuel injection (EFI) technology. At the current density of 10 mA cm⁻², it revealed a lower overpotential of 220 mV and a smaller Tafel slope value of 123 mV dec⁻¹, and after 20 h of continuous tests and 2000 CV cycles, and exhibited excellent electrochemical stability. Owing to the synergetic effects between Mo₂C, CeO₂ and nitrogen-doped porous carbon, the intrinsic catalytic activity of the catalyst was greatly improved, and the electron/proton transport was accelerated, therefore the Mo₂C/CeO₂/NC catalyst exhibited excellent HER catalytic performance and superior durability. And this work was expected to promote the development of nonmetal-doped carbon-supported nanoparticle-based catalysts in the field of electrochemistry.     

Partial phosphorization of porous Co–Ni–B for efficient hydrogen evolution electrocatalysis

Design of cost-effective and high-efficient electrocatalysts for hydrogen evolution reaction (HER) is of vital significance for the current renewable energy devices — fuel cells. Herein, we report a facile strategy to prepare partial phosphorization of Co–Ni–B material with porous structure via a water-bath boronizing and subsequent phosphorization process at moderate temperature. The optimal atomic proportion of Co to Ni is investigated via physical and electrochemical characterization. As a result, Co₉–Ni₁–B–P exhibits the best HER activity, which require an lower overpotential of ~192 mV to deliver a current density value of 10 mA cm⁻² and a smaller Tafel slope of 94 mV dec⁻¹ in alkaline media, relative to P-free Co–Ni–B catalysts, Co₉–Ni₁–B–P with other Co: Ni proportion and mono metallic borides The excellent electrocatalytic performance of Co₉–Ni₁–B–P is mainly ascribed to the three-dimensional (3D) porous structure and the coordinate functionalization between the borides and phosphides. This work provides a promising strategy for the exploration of quaternary composites as efficient and cost-effective electrocatalysts for HER.     

Synthesis and characterisation of platinum–cobalt–manganese ternary alloy catalysts supported on carbon nanofibers: An alternative catalyst for hydrogen evolution reaction

A systematic method for obtaining a novel electrode structure based on PtCoMn ternary alloy catalyst supported on graphitic carbon nanofibers (CNF) for hydrogen evolution reaction (HER) in acidic media is proposed. Ternary alloy nanoparticles (Co0.6Mn0.4 Pt), with a mean crystallite diameter under 10 nm, were electrodeposited onto a graphitic support material using a two-step pulsed deposition technique. Initially, a surface functionalisation of the carbon nanofibers is performed with the aid of oxygen plasma. Subsequently, a short galvanostatic pulse electrodeposition technique is applied. It has been demonstrated that, if pulsing current is employed, compositionally controlled PtCoMn catalysts can be achieved. Variations of metal concentration ratios in the electrolyte and main deposition parameters, such as current density and pulse shape, led to electrodes with relevant catalytic activity towards HER. The samples were further characterised using several physico-chemical methods to reveal their morphology, structure, chemical and electrochemical properties. X-ray diffraction confirms the PtCoMn alloy formation on the graphitic support and energy dispersive X-ray spectroscopy highlights the presence of the three metallic components from the alloy structure. The preliminary tests regarding the electrocatalytic activity of the developed electrodes display promising results compared to commercial Pt/C catalysts. The PtCoMn/CNF electrode exhibits a decrease in hydrogen evolution overpotential of about 250 mV at 40 mA cm⁻² in acidic solution (0.5 M H₂SO₄) when compared to similar platinum based electrodes (Pt/CNF) and a Tafel slope of around 120 mV dec⁻¹, indicating that HER takes place under the Volmer-Heyrovsky mechanism.     

Interface engineering of crystalline/amorphous Pt/TeOx nanocapsules for efficient alkaline hydrogen evolution

Hydrogen evolution reaction (HER) is an important process in electrochemical energy technology, and efficient electrocatalysts are of great significance for renewable and sustainable energy conversion. Here, we report a facile hydrothermal and heat treatment process to synthesize a series of Pt-based nanocapsules (NCs) as an effective hydrogen evolution catalyst. The Pt/TeO_x NCs exhibit excellent HER activity in an alkaline medium. The Pt/TeO_x NCs only need the overpotential of 33 mV to achieve the current density of 10 mA cm⁻², and the Tafel slope was as low as 29 mV dec⁻¹, which was even better than that of commercial Pt/C. Detailed experimental characterizations demonstrate that the interface between the crystalline Pt/amorphous TeO_x and the strong electron transfer contribute to alkaline HER activity. This work opens up a new direction for the preparation of efficient catalysts for electrocatalytic reactions or other conversion filed.     

Ru nanoclusters coupling with hierarchical phosphorus and oxygen dual-doped carbon nanotube architectures for effective hydrogen evolution reaction

The construction of an effective catalyst for hydrogen evolution reaction (HER) is a top priority. Herein, we demonstrate ruthenium (Ru) nanoclusters coupled with phosphorus and oxygen dual-doped carbon nanotube (CNT) architecture (Ru-POCA). The increased hydrophilicity and negatively charged surface of CNTs can strongly trap Ru ions. The hierarchical structure is favorable of providing abundant pathways and exposing more active sites for HER. Due to the synergistic effect of the hierarchical structure and modified surface chemistry, Ru-POCA exhibits excellent catalytic HER activity. The overpotential is 22 and 40 mV with a Tafel slope of 28.0 and 27.1 mV dec⁻¹ in 1 M KOH and 0.5 M H₂SO₄ at 10 mA cm⁻². Moreover, Ru-POCA processes good catalytic stability in both acidic and alkaline electrolytes, while the boosted catalytic HER activity is fundamentally studied by density functional theory calculation. This work provides a rational approach to constructing hierarchically structured Ru-CNTs-based catalysts for hydrogen evolution reaction.     

Novel 3-D urchin-like Ni– Co–W porous nanostructure as efficient bifunctional superhydrophilic electrocatalyst for both hydrogen and oxygen evolution reactions

Fabrication of an electrocatalyst with remarkable electrocatalytic activity for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is important for the production of hydrogen energy. In this study, Ni–Co–W alloy urchin-like nanostructures were fabricated by binder-free and cost-effective electrochemical deposition method at different applied current densities and HER and OER electrocatalytic activity was studied. The results of this study showed that the microstructure and morphology are strongly influenced by the electrochemical deposition parameters and the best electrocatalytic properties are obtained at the electrode created at the 20 mA.cm⁻²applied current density. The optimum electrode requires −66 mV and 264 mV, respectively, for OER and HER reactions for delivering the 10 mA cm⁻² current density. The optimum electrode also showed negligible potential change after 10 h electrolysis at 100 mA cm⁻², which means remarkable electrocatalytic stability. In addition, when this electrode used as a for full water splitting, it required only 1.58 V to create a current density of 10 mA cm⁻². Such excellent electrocatalytic activity and stability can be related to the high electrochemical active surface area, being binder-free, high intrinsic electrocatalytic activity and hydrophilicity. This study introduces a simple and cost-effective method for fabricating of effective electrodes with high electrocatalytic activity.     

Nanoporous NiFeMoP alloy as a bifunctional catalyst for overall water splitting

High performance bifunctional catalysts for water splitting are very promising. Transition metal phosphides as catalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) have attracted considerable attention due to their high performance. However, the catalyst with excellent properties still remains a significant challenge. Herein, the nanoporous NiFeMoP(np-NiFeMoP) ribbon was prepared by quenching and dealloying method. It was found that np-NiFeMoP showed excellent HER and OER performance in 1 M KOH. The overpotential of OER is as low as 197 mV at a current density of 20 mA·cm⁻². When the current density is 10 mA·cm⁻², the overpotential of HER is 223 mV. Moreover, np-NiFeMoP only needs a cell voltage of 1.41 V when current density is 10 mA·cm⁻² for water splitting. Our current work may provide some new insights on rationally constructing nanoporous structure with rich active sites to boost the catalytic performances for overall water splitting.     

Construction of hollow structure cobalt iron selenide polyhedrons for efficient hydrogen evolution reaction

The development of highly active, robust and cost-effective noble metal-free electrocatalysts for hydrogen evolution reaction (HER) in alkaline solution remains a severe challenge. In this work, a hollow structure CoSe₂-FeSe₂ heterojunction electrocatalyst (denoted by “(Co,Fe)Se₂”) was designed by a simple anion exchange reaction and selenization. Benefiting from the unique hollow structure, the (Co,Fe)Se₂ catalyst accelerates diffusion of electrolyte, besides, the CoSe₂-FeSe₂ heterojunction could provide rapid interfacial charge transportation and more active sites for the HER reaction. The (Co,Fe)Se₂ electrode material exhibits good performance for HER in 1 M KOH electrolyte. It needs an overpotential of 124 mV to obtain a current density of 10 mA cm⁻², and the Tafel slope is 65 mV dec⁻¹. Besides, (Co,Fe)Se₂ has a smaller charge transfer resistance compared with CoSe₂. At the same time, it has relatively large electrochemical active surface area due to the porosity. Most importantly, the (Co,Fe)Se₂ electrode displays good stability in alkaline conditions for 15 hours, the linear sweep voltammetry curves are almost coincident before and after 1000 cycles, the overpotential with current density of 10 mA cm⁻² increased by only 9.76% after 5000 cycles of CV. It shows great application potential in HER.     

Preparation of Ni–P–La alloy as a novel electrocatalysts for hydrogen evolution reaction

Ternary Ni–P–La alloy was synthesized by the co-electrodeposition method on the copper substrate. The energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), and X-ray diffraction (XRD) were used for characterization of the synthesized alloy. The electrochemical performance of the novel alloy was investigated based on electrochemical data obtained from steady-state polarization, Tafel curves, linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS) in alkaline solution and at ambient temperature. The results showed that the microstructural properties play a vital purpose in determining the electrocatalytic activity of the novel alloys. Also, the HER on investigated alloys was performed via the Volmer-Heyrovsky mechanism and Volmer step as RDS in this work. Ni–P–La catalyst was specified by ƞ₂₅₀ = −139.0 mV, b = −93.0 mV dec⁻¹, and j_o = −181.0 μA cm⁻². The results revealed that the Ni–P–La catalysts have a high potential for HER electrocatalysts in 1M NaOH solution.     

Preparation of ultrathin molybdenum disulfide dispersed on graphene via cobalt doping: A bifunctional catalyst for hydrogen and oxygen evolution reaction

The development of highly active and low-cost catalysts for hydrogen evolution reaction (HER) is significant for the development of clean and renewable energy research. Owing to the low H adsorption free energy, molybdenum disulfide (MoS₂) is regarded as a promising candidate for HER, but it shows low activity for oxygen evolution reaction (OER). Herein, graphene-supported cobalt-doped ultrathin molybdenum disulfide (Co–MoS₂/rGO) was synthesized via a one-pot hydrothermal method. The obtained hybrids modified electrode exhibits a high HER catalytic activity with a low overpotential of 147 mV at the current density of 10 mA cm⁻², a small Tafel slope of 49.5 mV dec⁻¹, as well as good electrochemical stability in acidic electrolyte. Meanwhile, the catalyst shows remarkable OER activity with a low overpotential of 347 mV at 10 mA cm⁻². The superior activity is ascribed not only to the high conductivity originated from the reduced graphene, but also to the synergistic effect between MoS₂ and cobalt.     

Hollow bimetallic M-Fe-P (M=Mn,Co, Cu) nanoparticles as efficient electrocatalysts for hydrogen evolution reaction

Searching for low-cost electrocatalysts with high activity towards the hydrogen evolution reaction (HER) is of great significance to enable large-scale hydrogen production via water electrolysis. In this study, by using inverse spinel MFe₂O₄(M = Mn, Fe, Co, Cu) nanoparticles (NPs) as the precursors, monodisperse bimetallic phosphide M-Fe-P NPs/C with hollow structures were readily obtained by a gas-solid annealing method. These hollow phosphide NPs displayed excellent HER activity in an acidic medium with a low loading amount of 0.2 mg cm⁻². In particular, the Co–Fe–P NPs/C shows highest HER activity that only requiring an overpotential of 97 mV to retain a current density of 10 mA cm⁻². A volcano relation between activity and incorporated elements was revealed. Incorporation of cation with high electronegativity stabilized the FeP active centres, while phase segregation resulted in the loss of activity for Cu–Fe–P NPs/C.     

Urchin-like Co0.8-Mn0.2-P/CC nanowires array: a high-performance and cost-effective hydrogen evolution electrocatalyst

Using cost-effective materials to replace precious Pt-based hydrogen evolution reaction (HER) catalysts holds great foreground for energy saving and environmental protection. In this work, we successfully prepared an urchin-like Co_0.8-Mn_0.2-P nanowires array supported on carbon cloth (CC) through a hydrothermal-phosphatization strategy and we also systematically studied its electrocatalytic HER performance. Electrochemical tests demonstrate that our urchin-like Co_0.8-Mn_0.2-P/CC possesses outstanding HER activity in acidic and alkaline media. In 0.5 M H₂SO₄, this urchin-like Co_0.8-Mn_0.2-P/CC only requires an overpotential of 55 mV to drive a current density of 10 mA cm⁻², with the Tafel slope of 55.9 mV dec⁻¹. Similarly, when reaching the same current density, just a particularly low overpotential of 61 mV is required with a corresponding Tafel slope of 41.7 mV dec⁻¹ in 1 M KOH. Furthermore, this electrocatalyst exhibits superior stability with 1000 cycles of cyclic voltammetry and 24 h in the I-T test. Such excellent HER catalytic performance can be attributed to the synergistic effect between Co and Mn atoms and high electrochemical active surface area (ECSA). Our work provides a valuable synthesis strategy of non-precious and high HER performance catalytic material.     

Cobalt-molybdenum disulfide supported on nitrogen-doped graphene towards an efficient hydrogen evolution reaction

Herein, the cobalt-molybdenum bimetallic sulfide catalysts supported on nitrogen-doped graphene (CoMoS₂/NGO) were facilely synthesized by a one-pot hydrothermal route. These composites exhibit various special nanostructures, rich in abundant edge site exposure and defects, which play an important role in providing active sites for catalyzing hydrogen evolution reaction (HER). When hydrogen peroxide (H₂O₂) was used as an additive in hydrothermal process, the as-fabricated composite exhibited more efficiency towards HER, showing as low onset overpotential (η_on) as −54 mV in 0.5 M H₂SO₄. Typical H₂O₂-assisted composite realized a remarkable cathodic current density of 30 mA cm⁻² at an overpotential η = −137 mV and it possessed a small Tafel slope of 34.13 mV dec⁻¹. Moreover, it exhibited an excellent cycling stability and superior electronic exchange rate. The results prove that CoMoS₂/NGO catalysts have great potential for electrochemical HER.     

Co-based MOF-derived Co/CoN/Co2P ternary composite embedded in N- and P-doped carbon as bifunctional nanocatalysts for efficient overall water splitting

In this work, we developed ternary metallic cobalt-cobalt nitride-dicobalt phosphide composite embedded in nitrogen and phosphorus co-doped carbon (Co/CoN/Co₂P-NPC) as bifunctional catalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). The as-prepared Co/CoN/Co₂P-NPC is achieved by simultaneous annealing and phosphating of a Co–N rich metal-organic frameworks (MOFs) precursor. Compare with the phosphorus-free Co/CoN embedded nitrogen-doped carbon electrocatalyst (Co/CoN-NC), the as-prepared Co/CoN/Co₂P-NPC display superior HER and OER low overpotential of 99 mV and 272 mV at current density of 10 mA cm⁻². When Co/CoN/Co₂P-NPC electrocatalyst is use as bifunctional catalysts in overall alkaline water splitting, it exhibit excellent behaviour with 10 mA cm⁻² current at overall cell potential of 1.60 V. The excellent performance of Co/CoN/Co₂P-NPC electrocatalyst is attributed to the phosphating process that could further enhance synergistic effect, create stronger electronic interactions, and form efficient dual heteroatom doping to optimize the interfacial adhesion within the electrocatalyst. This present work will create more opportunities for the development of new, promising and more active sites electrocatalysts for alkaline electrolysis.