Cyclometallated iridium(III) complexes with dicyanamide or tricyanomethanide

Reaction of cyclometallated iridium(III) complex Ir(ppy)₂(PPh₃)Cl (2, ppy = 2-phenylpyridine) with dicyanamide or tricyanomethanide gave neutral mononuclear complexes Ir(ppy)₂(PPh₃)N(CN)₂ (3a) or Ir(ppy)₂(PPh₃)C(CN)₃ (3b), and dicyanamide/tricyanomethanide-linked binuclear iridium(III) complexes [{Ir(ppy)₂(PPh₃)}₂N(CN)₂]⁺ (4a) or [{Ir(ppy)₂(PPh₃)}₂C(CN)₃]⁺ (4b). Substitution of coordinated chloride in the precursor 2 with dicyanamide or tricyanomethanide improved significantly the luminescence properties of 3a–4b. Compared with that in the precursor 2 (1.6%), 2.2 to 9.3-fold enhancement of emission quantum yields was detected in 3a–4b.     

Study of Gold Species in Iron-Oxide-Supported Gold Catalysts Derived from Gold-Phosphine Complex Au(PPh3)(NO3) and As-Precipitated Wet Fe(OH)3*

Iron-oxide-supported gold catalysts were prepared by supporting a Au phosphine complex Au(PPh₃)(NO₃) on as-precipitated wet iron hydroxide Fe(OH)₃^*, followed by temperature-programmed calcination. The Au/Fe(OH)₃^*catalysts calcined at the temperatures 573–773 K showed extremely high catalytic performance for CO oxidation at temperatures as low as 203–253 K. Interaction of the Au(PPh₃)(NO₃) gold precursor with the Fe(OH)₃^*upon supporting, transformation of the precursor during the heat treatments, and state of the gold in the catalysts were studied by FT-IR, XRD, TEM, XPS, and EXAFS. The gold precursor dissociated on the Fe(OH)₃^*surface to produce [Au(PPh₃)]⁺species which partially decomposed at 473 K and was transformed to small gold metallic particles with coordination numbers of 7.4–8.0 for Au-Au bond at calcination temperatures ≥573 K. In contrast, decomposition of the gold complex over crystalline Fe₂O₃^*resulted in large gold particles. The Au/Fe₂O₃^*sample was inactive at 203–253 K and exhibited very low activity for CO oxidation at room temperature. The efficiency of the as-precipitated wet Fe(OH)₃^*as a support is explained in terms of a higher stability of [Au(PPh₃)]⁺on the Fe(OH)₃^*as compared to the Fe₂O₃^*due to more effective interaction of the Au species with OH groups and defects of the amorphous Fe(OH)₃^*surface. The results demonstrate the importance of support–metal precursor interactions, both upon supporting and during calcination, in the formation of highly active catalysts with small Au particles for low-temperature CO oxidation.     

Ring opening metathesis copolymerization of norbornene with norbornadiene from solutions with different mole fractions of the comonomers catalyzed by Ru‐amine complexes

Copolymers from norbornene (NBE) with norbornadiene (NBD) were synthesized via ring opening metathesis copolymerization varying the mole fractions of the comonomers (0.8 : 0.2; 0.6 : 0.4; 0.4 : 0.6; 0.2 : 0.8) for a total monomer quantity of 5000 equivalents/[Ru]. The batch reactions were performed with [RuCl₂(PPh₃)₂(amine)] complex types as precatalysts, where amine is perhydroazepine ( 1 ) or piperidine ( 2 ), in CHCl₃ (2 mL) in the presence of ethyl diazoacetate (5 μL) for different intervals of times (5, 30, 60, and 120 min) at 40°C. The copolymers were characterized by ¹³C NMR. Quantitative yields of isolated materials were obtained from solutions with NBD : NBE 0.8 : 0.2 mole fraction in the presence of 1, decreasing to 70% for NBD : NBE 0.2 : 0.8 solutions. Concerning 2 , the yields were 70% at most. Polymeric materials obtained with 1 were less soluble in CHCl₃ than those synthesized with 2 . The dependence of the reaction yields and occurrence of crosslinking on the starting NBE : NBD proportion related to reactivity of the complexes 1 and 2 were discussed. A few differences in the amines such as ancillary ligands were sufficient to change the reactivity of the {RuCl₂(PPh₃)} moiety complex to provide copolymers with different compositions. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

ETS-10 Supported Au Nanoparticles for Solvent-Free Oxidation of 1-Phenylethanol with Oxygen

Abstract  

Au nanoparticles (NPs) were uniformly dispersed on ETS-10 titanosilicate using the cation exchange procedure and [Au(NH₃)₄](NO₃)₃ complex as the gold source. [Au(NH₃)₄]³⁺ cations were first introduced inside ETS-10 micropores, ligands were then released, Au³⁺ was reduced to Au⁺ forming electron-deficient Au clusters, and finally aggregation to Au NPs occurred. In comparison to the incipient-wetness and deposition–precipitation methods, the ion-exchange led to greater activity of the Au NPs in the oxidation of 1-phenylethanol by oxygen.     

The Uptake of Gold(I) from Ammonia Leaching Solution by Imidazole Containing Polymeric Resins

Abstract

The polymeric resins containing guanylthiourea, 1-methylimidazole, 2-mercapto-1-methylimidazole ligands have been synthesized from vinylbenzyl chloride-divinylbenzene copolymers and used in the removal of Au(I) from ammonium buffer and ammoniacal thiosulphate solutions. The best gold sorption from ammonium buffer that contains 100 g/dm³ NH₃ · H₂O and 5 g/dm³ (NH₄)₂SO₄, is reached in the case of 1-methylimidazole resin (2) (27.9 mg/g) and all three resins do not have a measurable sorption of copper(II) ammine complexes. The resins display a higher affinity towards gold(I) from ammoniacal thiosulphate solutions than from the ammonium buffer solution. The XPS analysis of gold loaded resins suggests the presence of gold at Au(I) oxidation state, most likely in the form of ionic pair Au(NH₃)₂ ⁺OH^? or neutral complex AuNH₃OH and as highly-dispersed metallic gold. The degree of gold desorption is about 50% using 1% potassium cyanide solution in 0.3% hydrogen peroxide solution. Resins retain their capacity towards gold in five consecutive sorption/desorption cycles.     

Gold‐cyanide biosorption with L‐cysteine

L ‐Cysteine increased gold‐cyanide biosorption by protonated Bacillus subtilis, Penicillium chrysogenum and Sargassum fluitans biomass. At pH 2, the maximum Au uptakes were 20.5 µmol g⁻¹, 14.2 µmol g⁻¹ and 4.7 µmol g⁻¹ of Au, respectively, approximately 148–250% of the biosorption performance in the absence of cysteine. Au biosorption mainly involved anionic AuCN₂⁻ species adsorbed by ionizable functional groups on cysteine‐loaded biomass carrying a positive charge when protonated [(biomass–cysteine–H⁺)–(AuCN₂⁻)]. Deposited gold could be eluted from Au‐loaded biomass at pH 3–5. The elution efficiencies were higher than 92% at pH 5.0 with the Solid‐to‐Liquid ratio, S/L, = 4. Increasing solution ionic strength (NaNO)₃ decreased Au uptake. FTIR analyses indicated that the main functional groups involved in gold biosorption in the presence of L ‐cysteine are probably N‐, S‐ and O‐containing groups. The present results confirm that certain waste microbial biomaterials are capable of effectively removing and concentrating gold from solutions containing residual cyanide if applied under appropriate conditions. © 2000 Society of Chemical Industry     

Diastereotopic relationship between planar and central chiralities in the formation of Ru(η3-allyl)(CO)(PPh3)(L–L′) complexes

Hydride ruthenium complexes, RuHCl(CO)(PPh₃)₂(L–L^′) 3 (L–L^′=bidentate ligand having nitrogen and oxygen) react with allenes to give Ru(η³-allyl)(CO)(PPh₃)(L–L^′) complexes 5 in good yields via hydrometalation reaction. The complexes 5 have planar chirality at the η³-allyl ligand and central chirality at the Ru metal, and consist of one pair of enantiomers. Ligand substitution reaction of Ru(η³-allyl)Cl(CO)(PPh₃)₂ complexes 6 with bidentate ligands (L–L^′) also afford the complexes 5 which have the same stereochemistry as those formed by the hydrometalation reaction. The planar chirality is controlled by the central chirality at the Ru metal in both the formations of the complexes 5. The structure of 5a (L–L^′=N–N bidentate ligand) was determined by the X-ray crystal structure analysis.     

Novel ether-containing ligands as potential technetium(I) heart agents

A novel pair of lipophilic cationic technetium complexes utilizing the ^99mTc-tricarbonyl core have been developed and evaluated for cardiac uptake. Di-(pyridyl-2-methyl)amine (DPA) and di-(imidazol-2-ylmethyl)amine (DIA) ligands were functionalized using aliphatic or aromatic ether substituents to provide the ligands 3 and 4. Octahedral complexes with the fac {^99mTc(CO)₃(ligand)}⁺ configuration were readily formed by reaction of ^99m[Tc(CO)₃(H₂O)₃]⁺ with the ether-containing tridentate ligands. The ^99mTc-tricarbonyl complexes, formed in >90% RCY and >90% RCP, were stable to transchelation in vitro against molar excesses of cysteine and histidine. Preliminary evaluation in rats after intravenous administration showed that the complexes concentrated in the heart muscle to an extent greater than surrounding tissue and blood. The ^99mTc-complex with derivatized DIA, {^99mTc(CO)₃(4)}⁺ (8), demonstrated 1.8% ID/g in the heart and a 90:1 heart to blood ratio at 120 min post-injection. These initial results provide support for an expanded evaluation of novel cationic ^99mTc-complexes for cardiac imaging.     

Research in Nanosciences – Great Opportunity for Catalysis Science

Au/MFI was prepared by sublimation of AuCl₃ onto HMFI. The oxidation state of the gold in the as-synthesized sample is Au³⁺. Upon heating in He or O₂, it transforms into gold metal and electron-deficient gold particles which agglomerate to larger Au particles. Reduction of Au³⁺ with CO to Au⁺ is accompanied by formation of an Au⁺(CO) complex. The carbonyl ligand has a remarkable stabilization effect on Au⁺ ions in zeolite cages. Strong IR bands show the CO vibration, and also the strong perturbation of the T–O–T vibrations of the zeolite lattice. [Au⁺(CO)]/MFI has a characteristic XRD pattern and is stable up to 200°C. Au/MFI catalyzes the decomposition of N₂O to N₂ even in the presence of 3% O₂. With hydrocarbons or NH₃ as the reductant, it has some NO_x reduction activity, but these catalysts deactivate at higher temperature even in inert gas atmosphere.     

Photoluminescence of [Pt(C3Ph3)Ln]PF6 with L = phenylphosphine ligands. Emission from a (Pt0 to C3Ph3+) MLCT triplet

The complex cations [Pt⁰(C₃Ph₃)(PPh₃)₂]⁺ and [Pt⁰(C₃Ph₃)(tripod)]⁺ with tripod = CH₃C(CH₂PPh₂)₃ contain the smallest Hückel aromat C₃R₃⁺ (with n = 0) as ligand. Since this cation is a CT acceptor, the complexes are characterized by low-energy (Pt⁰ to C₃Ph₃⁺) MLCT states. The complexes show a photoluminescence which originates from the lowest MLCT triplet.     

A convenient method for the synthesis of [Pd{[(η5-C5H3)–CHN–(CH2)2–NMe2]Fe(η5-C5H5)}Cl] and the study of its reactivity with diphosphines

A one-pot method for the preparation of [Pd{[(η⁵-C₅H₃)–CHN–(CH₂)₂–NMe₂]Fe(η⁵-C₅H₅)}Cl] is described. Its X-ray crystal structure and its reactions with the diphosphines Ph₂P–(CH₂)_n–PPh₂ {with n=1 (ddpm) or 2 (dppe)} are also reported.     

Electrochemical studies on gold electrodes in acidic solutions of thiourea containing gold (I) thiourea complex ions

Electrochemical studies were made of the behaviour of gold electrodes in degassed acidic solutions containing between 0.00l to 0.03 M thiourea and between 10^–5 to 10^–3 M gold(I)thiourea. At anodic overpotentials of up to 0.3 V the dissolution of gold was rapid, and nearly reached the maximum diffusioncontrolled rate. The exchange current density was greater than 10^–6 A cm^–2, and dissolution proceeded at 100% efficiency. At higher anodic potentials, thiourea was oxidized to formamidine disulphide and other sulphur-containing compounds and the dissolution of gold became partly inhibited, while the current efficiency decreased markedly.The reduction of gold(I)thiourea was diffusion-controlled at cathodic overpotentials between –0.15 to –0.35 V, after which slight inhibition was observed. Thiourea itself did not contribute to the cathodic reaction, but formamidine disulphide could be reduced on a freshly deposited gold surface; in the absence of gold(I)thiourea in the solution, the reduction of formamidine disulphide caused rapid passivation of the gold surface. In 0.01 M thiourea and 0.1 M sulphuric or perchloric acid, the diffusion coefficient of the Au(CS(NH₂)₂) ₂ ⁺ ion was 1·1 x 10^–5 cm² s^–1 at 30°C.The standard reduction potential at 30° C of the redox couple Au(CS(NH₂)₂) ₂ ⁺ ¦Au on a fresh gold surface wasE ₀=0.352 V, but on a passivated gold surface this value increased to as much asE ₀=041V.     

Supramolecular Polymers and Chiral Phosphine Oxides by Oxidation of Gold(I) Complexes

The chiral diphosphine ligand R,R-cyclo-C₆H₁₀-trans-1,2-{NHC(=O)C₆H₄-2-PPh₂}₂, 1, forms complexes with gold(I) of formula [Au(1)]Cl, 2, and [(ClAu)₂(µ-1)], 3, in which the diphosphine acts as a trans-chelate and bridging ligand, respectively. Oxidation of these gold(I) complexes leads to dissociation and oxidation of the diphosphine ligand to form the corresponding diphosphine dioxide R,R-cyclo-C₆H₁₀-1,2-{NHC(=O)C₆H₄-2-P(=O)Ph₂}₂, which has been crystallized in its protonated form and as complexes with Na⁺ and Fe²⁺, with [AuBr₂]^? or [AuBr₄]^? anions. Some of these compounds form supramolecular polymers by intermolecular hydrogen bonding.     

In situ preparation of Au or Ag nanoparticles in the presence of hyperbranched poly(amidoamine)s with hydrophobic end‐groups as nanoreactors and reductants

Hyperbranched poly(amidoamine)s with methyl ester terminals (HPAMAM‐COOCH₃) were used as nanoreactors and reductants to prepare gold or silver nanoparticles (Au NPs or Ag NPs). HPAMAM‐COOCH₃ could bind AuCl₄ ⁻ (or Ag⁺) and then reduce AuCl₄ ⁻ (or Ag⁺) into Au NPs (or Ag NPs) through their internal amines, while the external methyl ester groups prevented the aggregation of polymers. The formation of Au NPs or Ag NPs was verified using transmission electron microscopy (TEM), ultraviolet‐visible spectroscopy (UV‐Vis), X‐Ray powder diffraction (XRD), Fourier‐transform infrared spectroscopy (FT‐IR), and thermogravimetric analysis (TGA), confirming the formation of Au NPs or Ag NPs with small particle size and low size distribution.POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers     

Synthesis and characterisation of the first examples of four-membered ring ruthenalactam complexes

Reaction of the complexes [RuCl₂(PPh₃)L] (L = η⁶-p-cymene or η⁶-hexamethylbenzene) with N-cyanoacetylurethane [NCCH₂C(O)NHCO₂Et] and tertiary amine base in refluxing methanol gives the first examples of mononuclear complexes containing the four-membered ruthenalactam ring, Ru–C–C(O)–N. The complexes were characterised by ¹H and ³¹P{¹H} NMR spectroscopy and ESI mass spectrometry. A single-crystal X-ray diffraction study on the p-cymene complex showed the four-membered ruthenalactam ring to be planar.     

Synthesis,characterization, and catalytic applications of Ru(III) complexes containing N-[di(alkyl/aryl)carbamothioyl]benzamide derivatives and triphenylphosphine/triphenylarsine

Six coordinated ruthenium(III) complexes of the type [RuX₂(L)(PPh₃)₂] or [RuX₂(L)(AsPh₃)₂] {where L = N-[di(alkyl/aryl)carbamothioyl]benzamide derivatives, X = Cl or Br} have been prepared by the reaction between [RuX₃(PPh₃)₃] or [RuX₃(AsPh₃)₃] (where X = Cl or Br) and N-[di(alkyl/aryl)carbamothioyl]benzamide derivatives in toluene and characterized by elemental analysis, spectral data (electronic, IR and EPR) and magnetic moment studies. The complexes act as efficient catalysts for the oxidation of alcohols in presence of N-methylmorpholine-N-oxide as oxidant at room temperature.     

Preparation of supported gold catalysts from gold complexes and their catalytic activities for CO oxidation

A phosphine-stabilized mononuclear gold complex Au(PPh₃)(NO₃) (1) and a phosphine-stabilized gold cluster [Aug(PPh₃)₈](NO₃)₃ (2) were used as precursors for preparation of supported gold catalysts. Both complexes 1 and 2 supported on inorganic oxides such as -Fe₂O₃, TiO₂, and SiO₂ were inactive for CO oxidation, whereas the 1 or 2/ oxides treated under air or CO or 5% h₂/Ar atmosphere were found to be active for CO oxidation. The catalytic activity depended on not only the treatment conditions but also the kinds of the precursor and the supports used. The catalysts derived from 1 showed higher activity than those derived from 2. -Fe₂O₃ and TiO₂ were much more efficient supports than SiO₂ for the gold particles which were characterized by XRD and EXAFS.     

Modeling gold/iron oxide interface system

The effect of gold particle size and Au/FeO _x interface on the electronic properties and catalytic activity using samples of Au/SiO₂/Si(100), Au/FeO _x /SiO₂/Si(100), FeO _x /Au/SiO₂/Si(100) has been modelled. Nanosize gold particles of varying size were fabricated by deposition of a 10 nm thick gold film onto SiO₂/Si(100) substrate by electron beam evaporation followed by modification using low energy Ar⁺ ion bombardment or Ar⁺ ion implantation. These modifications formed Au islands of decreasing size accompanied by the strong redistribution of the Au 5d valence band structure determined by ultraviolet and X-ray photoelectron spectroscopy (UPS, XPS) and increased activity in catalytic CO oxidation. The gold/iron oxide interface was prepared by deposition of iron oxide using pulsed laser deposition (PLD). The structural properties of gold and iron oxide were characterized by XPS, atomic force microscopy (AFM), transmission electron microscopy (TEM) and secondary ion mass spectroscopy (SIMS). Generally, the formation of gold/iron oxide interface increases the catalytic activity in CO oxidation regardless of the sequence of deposition, namely either Au/FeO _x /SiO₂/Si(100) or FeO _x /Au/SiO₂/Si(100) is formed. Furthermore, the interface formed is operative in determining the catalytic activity even if gold is not exposed to the surface, but it is located underneath the iron oxide layer. This is a promoting effect of the Au nanoparticles, which is more efficient than that of the bulk like Au films.     

Anticancer Profile of a Series of Gold(III) (2‐phenyl)pyridine Complexes

Six phosphorescent (2‐phenyl)pyridine (ppy) gold(III) 2,4,6‐tris(trifluoromethyl)phenyl (FMes) complexes were synthesized and investigated for their anticancer potential. The compounds demonstrated strong antiproliferative activity, with EC₅₀ values in the low micromolar range, along with significant accumulation in HeLa cancer cells after treatment for only 6 h (up to 119 ng gold per milligram of protein as measured by high‐resolution continuum source atomic spectroscopy). Enzyme inhibition studies showed interaction of the gold(III) complexes with thioredoxin reductase (TrxR), a key homeostasis‐regulation flavoprotein. TrxR was inhibited with IC₅₀ values in the micromolar range. Furthermore, five of the complexes displayed selectivity toward TrxR against glutathione reductase (GR, a disulfide reductase structurally related to TrxR) by up to >49‐fold. Because no major differences in bioactivity were observed across the series, [(ppy)Au(FMes)(PPh₃)OTf] (complex 4 ) was chosen for further in‐depth biological characterization. Complex 4 was also found to interact with guanosine monophosphate in ¹H NMR studies under long incubation times. Interestingly, 4 induced a significant increase in intracellular levels of reactive oxygen species, which led to late apoptotic events and cytocidal effects.     

Decavanadate with a novel coordination complex: Synthesis and characterization of (NH4)2[Ni(H2O)5(NH3)]2(V10O28)·4H2O

A new compound (NH₄)₂[Ni(H₂O)₅(NH₃)]₂[V₁₀O₂₈]·4H₂O (1) containing a {V₁₀O₂₈} ⁶⁻ anionic cluster and a novel complex cation, [Ni(H₂O)₅(NH₃)]^2 +, has been synthesized and fully characterized by single crystal X-ray crystallography, spectroscopy and thermogravimetric analysis. The presence of the ammonia ligand in the complex cation in 1 was established unambiguously by X-ray crystallography and variable temperature (200–400 °C) thermogravimetric analyses in combination with FTIR spectroscopic studies. The formation of the novel complex species {Ni(H₂O)₅(NH₃)}^2 + during the synthesis of 1 can be rationalized in terms of ligand substitution involving {Ni(H₂O)₆}^2 +.