An investigation of colour appearance for unrelated colours under photopic and mesopic vision

Data were obtained for the colour appearance of unrelated colours under photopic and mesopic conditions. The effects of changes in luminance level and stimulus size were investigated. The method used was magnitude scaling of brightness, colourfulness, and hue. Two stimulus sizes (10° and 0.5°) and four starting luminance levels (60, 5, 1, and 0.1, cd/m²) were used. The results at 0.1 cd/m² had large variations, so data were obtained for two additional stimulus sizes (1° and 2°) at this luminance level. Ten observers judged 50 unrelated colours. A total of 17,820 estimations were made. The observations were carried out in a completely darkened room, after 20 min adaptation; each test colour was presented on its own. Brightness and colourfulness were found to decrease with decreases of both luminance level and stimulus size. The CAM97u model predicted brightness more accurately than CIECAM02 but gave worse performance in predicting colorfulness. For hue, CAM97u and CIECAM02 both gave satisfactory predictions. Using the brightness correlate from CAM97u, a new colour‐appearance model based on CIECAM02 was developed specifically for unrelated colours under photopic and mesopic conditions, with parameters to allow for the effects of luminance level and stimulus size. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2011;     

Correcting veiling glare of refined CIECAM02 for mobile display

Small displays are widely used; they are small enough to be carried around and are often viewed under extreme surround conditions. Under bright illumination, mobile display users experience “veiling glare” caused by bright ambient lighting. A refined version of CIECAM02 called “Refined CIECAM02 and original CIECAM02” were tested to predict visual results in terms of lightness (J), colourfulness (M), and brightness (Q) on a 2‐inch sized display (2″) mobile phone under four surround conditions; dark (0 cd/m²), dim (5 cd/m²), average (1000 cd/m²), and bright (10,000 cd/m²). Other than the two versions of CIECAM02 using the original data, a correction to the models' predicted lightness J and a black correction to the original data were developed. Overall, the refined CIECAM02 plus the J correction performed the best for predicting the lightness, brightness and colourfulness under all the viewing conditions, especially for bright surround condition. Furthermore, another experiment was carried out using complex images to verify different versions of CIECAM02. The images were reproduced using JMh (lightness, colourfulness, and hue) spaces from the modified CIECAM02 versions. The experiment was conducted by comparing original images viewed under dim, average, or bright surround conditions and the predicted images were viewed under dark surround condition on two identical mobile displays. The different versions of the CIECAM02 showed similar results to each other for dim and average surround conditions but large differences when predicting the images under bright surround condition. The refined CIECAM02 with the J′ formula performed the best amongst all four CIECAM02 versions. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2013.     

Unique hue data for colour appearance models. Part I: Loci of unique hues and hue uniformity

Psychophysical experiments were conducted to assess unique hues on a CRT display for a large sample of colour‐normal observers (n = 185). These data were then used to evaluate the most commonly used colour appearance model, CIECAM02, by transforming the CIEXYZ tristimulus values of the unique hues to the CIECAM02 colour appearance attributes, lightness, chroma and hue angle. We report two findings: (1) the hue angles derived from our unique hue data are inconsistent with the commonly used Natural Color System hues that are incorporated in the CIECAM02 model. We argue that our predicted unique hue angles (derived from our large dataset) provide a more reliable standard for colour management applications when the precise specification of these salient colours is important. (2) We test hue uniformity for CIECAM02 in all four unique hues and show significant disagreements for all hues, except for unique red which seems to be invariant under lightness changes. Our dataset is useful to improve the CIECAM02 model as it provides reliable data for benchmarking. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2011     

Changes in colour appearance of a large display in various surround ambient conditions

This article focuses on the change in colour appearance of a large display arising from various illumination conditions. Nine experimental phases were conducted according to different surround conditions including dark, indoor, and outdoor conditions. Each of the presented test colours was assessed by 10 observers using a magnitude estimation method. The surrounds used in all phases were divided into two groups: excluding and including veiling glare. Additionally, the effect due to different sizes of both stimuli and surround was investigated. Diverse visual effects were examined and reported. Finally, the visual colour appearance data were used to test the CIECAM02 colour appearance model. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010     

Testing the performance of CIECAM02 from 100 to 3500 cd/m2

Color appearance models were developed to characterize the color attributes of stimuli under different viewing conditions based on data collected through magnitude estimation or color matching experiments. Although human beings experience very high light levels under daylight and the reproduction of colors under daylight is important in the color and imaging industries, the existing color appearance models were developed based on the data that were collected under the conditions with luminance levels below 700 cd/m² due to the lack of facilities to produce stable illumination at high light levels. A recent study investigating color preference of an artwork under a wide range of light levels from 20 to 15 000 lx suggested that CIECAM02 cannot accurately characterize the color appearance under extremely high light levels. This study was designed to directly test the performance of CIECAM02 from 100 to 3500 cd/m². Human observers performed color match for four hues under a series pairs of adapting conditions with a haploscopic viewing condition. It was found that CIECAM02 had the best performance in characterizing the hue angles but the worse performance in characterizing the brightness with a maximum underprediction around 200% across a wide range of luminance. This was mainly due to the fact that CIECAM02 was developed based on the data collected under relatively low adapting luminance levels. The color appearance model that was proposed to use the adapting luminance levels in characterizing the cone compression in the postadaptation process was found to have a much better performance in characterizing the brightness.     

Proposed modification to the CIECAM02 colour appearance model to include the simultaneous contrast effects

A modified CIECAM02 colour appearance model, named CIECAM02‐m2, is proposed to enable CIECAM02 to predict the simultaneous contrast effect. The structure of the CIECAM02‐m2 is a development from CIECAM02, and contains two different procedures for modifying the reference white; one is for lightness and the other is for hue. The model was tested using a data set accumulated in this study and the LUTCHI data. The CV values for three colour attributes between predictions and experimental data were used to evaluate the accuracy of the model. The low CV values obtained show the performance of the CIECAM02‐m2 model to predict the simultaneous contrast effect satisfactorily. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 121 – 129, 2007     

Mathematical approach for predicting non‐negative tristimulus values using the CAT02 chromatic adaptation transform

It has been reported that for certain colour samples, the chromatic adaptation transform CAT02 imbedded in the CIECAM02 colour appearance model predicts corresponding colours with negative tristimulus values (TSVs), which can cause problems in certain applications. To overcome this problem, a mathematical approach is proposed for modifying CAT02. This approach combines a non‐negativity constraint for the TSVs of corresponding colours with the minimization of the colour differences between those values for the corresponding colours obtained by visual observations and the TSVs of the corresponding colours predicted by the model, which is a constrained non‐linear optimization problem. By solving the non‐linear optimization problem, a new matrix is found. The performance of the CAT02 transform with various matrices including the original CAT02 matrix, and the new matrix are tested using visual datasets and the optimum colours. Test results show that the CAT02 with the new matrix predicted corresponding colours without negative TSVs for all optimum colours and the colour matching functions of the two CIE standard observers under the test illuminants considered. However, the accuracy with the new matrix for predicting the visual data is approximately 1 CIELAB colour difference unit worse compared with the original CAT02. This indicates that accuracy has to be sacrificed to achieve the non‐negativity constraint for the TSVs of the corresponding colours. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2011     

Colour appearance of room colours

Psychophysical experiments were conducted to investigate the colour appearance changes between small colour patches and real room colours. The results clearly showed that colours appear lighter and more colourful for room colours. A method based on CIECAM02 was developed to quantify the colour size effect. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010     

A comprehensive model of colour appearance for related and unrelated colours of varying size viewed under mesopic to photopic conditions

CIE has recommended two previous appearance models, CIECAM97s and CIECAM02. However, these models are unable to predict the appearance of a comprehensive range of colours. The purpose of this study is to describe a new, comprehensive colour appearance model, which can be used to predict the appearance of colours under various viewing conditions that include a range of stimulus sizes, levels of illumination that range from scotopic through to photopic, and related and unrelated stimuli. In addition, the model has a uniform colour space that provides a colour‐difference formula in terms of colour appearance parameters. © 2016 Wiley Periodicals, Inc. Col Res Appl, 42, 293–304, 2017     

Grids for Assessing Colour Appearance

A technique of subjective magnitude estimation has been used to assess a set of pseudosurface colours, each having a luminance equal to half that of its adapting surround. Five observers scaled each of the colours three times in each of two adaptation conditions corresponding to daylight and tungsten light at 120 cd/m². Loci of constant hue and saturation were derived in u', v' chromaticity space for daylight and tungsten light. These grids enable the appearance of a colour to be specified from a knowledge of its chromaticity coordinates and they enable such effects as colour constancy and colour fidelity to be investigated in terms of perceived colour appearance.     

Colour appearance shifts in two different‐sized viewing conditions

This study assessed the effect of size on colour appearance, using a colour matching paradigm where two sizes were presented in a setting similar to a normal colour selection interface. Twelve colours sampling the entire range of the colour spectrum were chosen as target stimuli. The target stimuli consisted of either a large (30° by 50°) or a small (0.5° by 0.5°) test field displayed on a cathode ray tube (CRT). In the experiment, a set of small colour samples consisting of the target and its neighboring colours was presented on the screen. Fifty‐seven participants were asked to pick a colour from the sample set that appeared to exactly match the target. Results in CIECAM02 showed a consistent increase in the apparent brightness (Q) but some decrease in saturation (s) for the larger field. Hue shifts were observed to form a systematic pattern. We noticed a discernable trend showing that, for targets of bluish or purplish colour hues, the accuracy of colour matching is lower and colour difference is greater in the condition of the large viewing field. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010     

Unique hue data for colour appearance models. Part III: Comparison with NCS unique hues

In this study, Swedish Natural Color System (NCS) unique hue data were used to evaluate the performance of unique hue predictions by the CIECAM02 colour appearance model. The colour appearance of 108 NCS unique hue stimuli was predicted using CIECAM02, and their distributions were represented in a CIECAM02 a_c–b_c chromatic diagram. The best‐fitting line for each of the four unique hues was found using orthogonal distance regression in the a_c–b_c chromatic diagram. Comparison of these predicted unique hue lines (based on the NCS data) with the default unique hue loci in CIECAM02 showed that there were significant differences in both unique yellow (UY) and unique blue (UB). The same tendency was found for hue uniformity: hue uniformity is worse for UY and UB stimuli in comparison with unique red (UR) and unique green (UG). A comparison between NCS unique hue stimuli and another set of unique hue stimuli (obtained on a calibrated cathode ray tube) was conducted in CIECAM02 to investigate possible media differences that might affect unique hue predictions. Data for UY and UB are in very good agreement; largest deviations were found for UR. © 2014 Wiley Periodicals, Inc. Col Res Appl, 40, 256–263, 2015     

Different matrices for CIECAM02

CIECAM02 has been used to predict colour appearance under a wide range of viewing conditions, to provide a uniform colour space, and to provide a profile connection space for colour management. However, some problems have been identified with CIECAM02. CIE Technical Committee 8‐11 is currently working on the methods to resolve the problems for practical applications. Part of the CIE TC8‐11 work is to repair the lightness computational failure. This article incorporates most of the previous suggestions and makes some further tests. It is hoped that this article will aid the ongoing work of the CIE TC8‐11 and perhaps be the starting point for repairing the CIECAM02 for colour management and for the new recommendation. © 2012 Wiley Periodicals, Inc. Col Res Appl, 39, 143–153, 2014     

Quantifying colour appearance. Part I. Lutchi colour appearance data

The work described here forms part of a research project entitled Predictive Perceptual Colour Models. The aim of this project is to develop a colour appearance model capable of predicting changes of colour appearance under various different viewing conditions. This will provide industry with a quantitative measure for assessing the quality of colour reproduction and enable more rapid and accurate proofing simulations in the graphic art industry. A large-scale experiment has been carried out in which colour appearance was assessed under a wide range of viewing conditions. The parameters studied were (1) D65, D50, white fluorescent, and tungsten light sources, (2) luminance levels of about 40 and 240 cd/m², (3) five background conditions: white, grey, black, grey with white border, and grey with black border, and (4) two media: luminous colours (displayed on a high-resolution colour monitor) and nonluminous colours (presented in a viewing cabinet). Each colour was assessed by a panel of six or seven observers using a magnitude estimation method. In total, 43,332 estimations were made, and these form the LUTCHI Colour Appearance Data. Data analysis has been carried out to examine the reliability of the experimental results and to understand the effects of the various viewing parameters studied. (Part II of this article describes how the LUTCHI Colour Appearance Data has been used to test the performance of various colour spaces and models.     

Quantifying colour appearance. part V. simultaneous contrast

Experiments were carried out to investigate the effect of simultaneous contrast on colour appearance by varying the lightness, colourfulness, and hue of an induction field surrounding a test colour. A total of 814 test/surround combinations were displayed on high-resolution colour displays. Each was assessed by a panel of five to six observers using a magnitude estimation technique. the results indicate that colours presented on a computer display are affected by simultaneous contrast in a similar way to surface colours. All three colour appearance parameters studied (i.e., lightness, colourfulness, and hue) are affected and these effects are summarized. In general, the results support and add to the findings of the other studies. the Hunt colour appearance model was tested and gave a somewhat poor prediction to this data set. Further modifications are required to improve its performance. © 1995 John Wiley & Sons, Inc.     

Preprocessing to CIECAM02 input color with chromatic background

A preprocessing to CIECAM02 input color for color appearance prediction was proposed. In this study, 8640 color appearance matching pairs (NCS color charts with red, green, yellow, and blue backgrounds in a light booth and their reproductions with gray background on a CRT screen) were obtained by psychophysical experiment using the simultaneous‐binocular technique. Because only the lightness of background is included in CIECAM02, a color inducing vector based on opponent‐colors theory was introduced to preprocess CIECAM02 inputs, so that CIECAM02 may predict the corresponding color of an input color with chromatic background as well. By data fitting, a color preprocessing formula describing a relationship between the color inducing vector and the NCS chromaticness was conducted. Furthermore, the formula's performance was tested and the results showed that it was good for implementing the color appearance prediction of input colors with different chromatic backgrounds.© 2006 Wiley Periodicals, Inc. Col Res Appl, 32, 40–46, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20287     

Dynamic cone response functions for models of colour appearance

The CIECAM97s type of colour appearance models results in some changes in hue and saturation for series of colours of constant chromaticity but changing luminance factor. To keep hue and saturation constant for such series, a model in which the dynamic cone response is based on a power function has been developed. By optimizing its parameters, its correlates of hue, lightness, colourfulness, brightness, and saturation perform nearly as well as those of CIECAM97s. A similar performance is achieved in a modified power model, which is more physiologically plausible. © 2003 Wiley Periodicals, Inc. Col Res Appl, 28, 82–88, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.10128     

Optimum solution of the CIECAM02 yellow–blue and purple problems

Brill [Color Res Appl 2006;31:142‐145] and Brill and Süsstrunk [Color Res Appl 2008;33:424‐426] found that CIECAM02 has the yellow–blue and purple problems and gave partial solutions to them. In this article we model the optimum solution to the yellow–blue and purple problems simultaneously as a constrained non‐linear optimization problem. An optimum solution resulting in a new CAT02 matrix is numerically obtained. This new matrix satisfies the nesting rule and performs better than the Hunt‐Pointer‐Estévez (HPE) matrix in predicting both corresponding colours and colour appearance data sets. Specifically, it was found that the new and HPE matrices performed significantly different on nine (out of 21) corresponding colour data sets and on all corresponding colours data sets as a whole. © 2014 Wiley Periodicals, Inc. Col Res Appl, 40, 491–503, 2015     

Lightness and hue contrast effects in surface (fabric) colours

Simultaneous contrast effects on lightness and hue in surface colours were investigated. Test colours, surrounded by induction colours, were matched by colours surrounded by neutral gray. The matching colours were selected from a series of samples that varied in either lightness or hue respectively. The lightness experiments were carried out by a panel of 20 observers on 135 test/induction colour combinations. The hue experiments were conducted on 51 test/induction colour combinations by a panel of eight observers. The lightness of the test colour was found to decrease linearly with the lightness of the induction colour, regardless of the hue of the induction colour. The magnitude of the lightness contrast effect in fabric colours was found to be about one‐quarter of that found in CRT display colours in a previous study. The hue contrast effect found in this study followed the opponent‐colour theory. Two distinctly different regions could be identified when the hue difference was plotted against hue‐angle difference between the induction colour and the test colour. The slope of the line in the region where the hue of the induction colour is close to the test colour was much larger than the slope in the other region, indicating that the hue contrast effect was more obvious when the induction colour was close to the test colour. © 2006 Wiley Periodicals, Inc. Col Res Appl, 32, 55–64, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20285     

Experimental object color unique hue data for the mean observer for color appearance modeling

Color appearance models, among other things, predict the hue of a stimulus when compared with defined stimuli that represent the four unique hues. Recent studies have indicated that the stimuli representing with high reliability unique hue (UH) percepts vary widely for different color‐normal observers. The average yellow and blue UH stimuli for 102 observers, as determined in a recent experiment at medium chroma, differ considerably from the CIECAM02 defined unique hues, based on the Swedish NCS. Wide inter‐observer variability precludes color appearance models from accurately predicting, for individual observers, all four unique hue stimuli. However, models should predict accurately those of a well‐defined average observer. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 505–506, 2008