Adsorption thermodynamics and kinetics study for the self-assembly of 1,8,15,22-tetraaminophthalocyanatocobalt(II) on glassy carbon surface

Spontaneous adsorption of 1,8,15,22-tetraaminophthalocyanatocobalt(II) (4α-Co^IITAPc) on glassy carbon (GC) electrode leads to the formation of a stable self-assembled monolayer (SAM). Since the SAM of 4α-Co^IITAPc is redox active, its adsorption on GC electrode was followed by cyclic voltammetry. SAM of 4α-Co^IITAPc on GC electrode shows two pairs of well-defined redox peaks corresponding to Co^III/Co^II and Co^IIIPc⁻¹/Co^IIIPc⁻². The surface coverage (Γ) value, calculated by integrating the charge under Co^II oxidation, was used to study the adsorption thermodynamics and kinetics of 4α-Co^IITAPc on GC surface. Cyclic voltammetric studies show that the adsorption of 4α-Co^IITAPc on GC electrode has reached the saturation coverage (Γ_s) within 3 h. The Γ_s value for the SAM of 4α-Co^IITAPc on GC electrode was found to be 2.37 × 10⁻¹⁰ mol cm⁻². Gibbs free energy (ΔG_ads) and adsorption rate constant (k_ad) for the adsorption of 4α-Co^IITAPc on GC surface were found to be −16.76 kJ mol⁻¹ and 7.1 M⁻¹ s⁻¹, respectively. The possible mechanism for the self-assembly of 4α-Co^IITAPc on GC surface is through the addition of nucleophilic amines to the olefinic bond on the GC surface in addition to a meager contribution from π stacking. The contribution of π stacking was confirmed from the adsorption of unsubstituted phthalocyanatocobalt(II) (CoPc) on GC electrode. Raman spectra for the SAM of 4α-Co^IITAPc on carbon surface shows strong stretching and breathing bands of Pc macrocycle, pyrrole ring and isoindole ring. Raman and CV studies suggest that 4α-Co^IITAPc is adopting nearly a flat orientation or little bit tilted orientation.     

Synthesis and electrochemical properties of benzyl-mercapto and dodecyl-mercapto tetrasubstituted manganese phthalocyanine complexes

Manganese tetrakis (benzyl-mercapto) phthalocyanine (MnTBMPc) and manganese tetrakis (dodecyl-mercapto) phthalocyanine (MnTDMPc) complexes were synthesized and their spectral and electrochemical properties are reported. Cyclic voltammetric data showed three reversible to quasi-reversible and two irreversible redox processes for both complexes. Ring substituents influenced the positions of both oxidation and reduction redox couples. Spectroelectrochemistry confirmed the first two reductions to be due to Mn^IIIPc²⁻/Mn^IIPc²⁻ and Mn^IIPc³⁻/Mn^IIPc²⁻ processes. The first example of a formation of self-assembled monolayers (SAMs) using thiol substituted MnPc complexes is presented, the SAMs were found to show blocking characteristics towards some faradaic reactions.     

Synthesis and electrochemical characterisation of benzylmercapto and dodecylmercapto tetra substituted cobalt, iron, and zinc phthalocyanines complexes

The work reports on cyclic voltammetry (CV), square wave voltammetry and spectroelectrochemistry of the following complexes: tetrakis (benzylmercapto) phthalocyanine complexes of Zn(II) (ZnTBMPc, 4a), Co(II) (CoTBMPc, 5a), and Fe(II) (FeTBMPc 6a); tetrakis (dodecylmercapto) phthalocyanine complexes of Zn(II) (ZnTDMPc, 4b), Co(II) (CoTDMPc, 5b), and Fe(II) (FeTDMPc, 6b). More reversible CV couples were observed for complexes 4a, 5a, and 6a containing thiol phenyl ring substituents. Complexes 4b, 5b, and 6b containing long chain thiol substituents showed less reversible couples. Complexes 6a and 6b showed a relatively large number of redox processes (5 for 6a and 6 for 6b) within the potential window employed in this work. The processes for FePc derivatives (6a) are assigned to Fe^IIIPc⁻¹/Fe^IIIPc⁻², Fe^IIIPc⁻²/Fe^IIPc⁻², Fe^IIPc⁻²/Fe^IPc⁻², Fe^IPc⁻²/Fe^IPc⁻³, and Fe^IPc⁻³/Fe^IPc⁻⁴ and for the CoPc derivative (5a) to Co^IIIPc⁻¹/Co^IIIPc⁻², Co^IIIPc⁻²/Co^IIPc⁻², Co^IIPc⁻²/Co^IPc⁻², and Co^IPc⁻²/Co^IPc⁻³.     

Kinetic study on regeneration of FeEDTA in the wet process of NO removal

Cyclic voltammetry, quasi-steady-state polarization curves and potentiostatic step method were applied to study the regeneration of Fe^IIEDTA in the wet process of NO removal. The results showed that the Fe^IIIEDTA reduction was a fast reversible process with one electron transferred on Pt electrode surface. Standard rate constant k⁰ of Fe^IIIEDTA reduction at 298 K was found to be 0.0263 cm s⁻¹. According to the calculated diffusion activation energy of 24.93 kJ mol⁻¹, apparent activation energy of 25.74 kJ mol⁻¹ and the electron transfer activation energy of 16.56 kJ mol⁻¹, the rate-determining step for Fe^IIIEDTA reduction was diffusion step. Potentiostatic electrolysis tests revealed that direct electrochemical regeneration of Fe^IIEDTA in the wet process of NO removal was a promising method because of its high efficiency.     

Electrochemical characterisation of tetra- and octa-substituted oxo(phthalocyaninato)titanium(IV) complexes

The synthesis and electrochemical characterisation of the following oxotitanium tetra-substituted phthalocyanines are reported: 1,(4)-(tetrabenzyloxyphthalocyaninato)titanium(IV) oxide (5a); 1,(4)-{tetrakis[4-(benzyloxy)phenoxy]phthalocyaninato}titanium(IV) oxide (5b); 2,(3)-(tetrabenzyloxyphthalocyaninato)titanium(IV) oxide (6a) and 2,(3)-{tetrakis[4-(benzyloxy)phenoxy]phthalocyaninato}titanium(IV) oxide (6b). The electrochemical characterisation of complexes octa-substituted with 4-(benzyloxy)phenoxy (9b), phenoxy (9c) and tert-butylphenoxy (9d) groups is also reported. The cyclic voltammograms of the complexes exhibit reversible couples I-III and couple IV is quasi-reversible for complexes 5a, 5b, 6a and 6b. The first two reductions are metal-based processes, confirmed by spectroelectrochemistry to be due to Ti^IVPc²⁻/Ti^IIIPc²⁻ and Ti^IIIPc²⁻/Ti^IIPc²⁻ redox processes and the last two reductions are ring-based processes due to Ti^IIPc²⁻/Ti^IIPc³⁻ and Ti^IIPc³⁻/Ti^IIPc⁴⁻. Chronocoulometry confirmed a one-electron transfer at each reduction step. The electrochemistry of the above complexes is also compared to the previously reported 5c, 5d, 6c and 6d.     

Novel Hg and Mn supramolecular complexes with a versatile building block 5-(4-pyridyl)-1,3,4-oxadiazole-2-thiolate involving in situ ligand formation

Reaction of potassium N′-(pyridine-4-carbonyl)-hydrazinecarbodithioate ([K⁺(H₂L)⁻]) with Hg^II or Mn^II inorganic salt in the presence of 1,10-phenanthroline (phen) or 4,4′-bipyridine (bipy), yields complexes [Hg(pyt)₂(phen)] (1) and {[Mn(pyt)₂(H₂O)₂]·(bipy)·(H₂O)₂}_n (2), in which the pyt ligand (Hpyt = 5-(4-pyridyl)-1,3,4-oxadiazole-2-thiol) is obtained by in situ ligand formation from the acyclic precursor [K⁺(H₂L)⁻]. Single crystal X-ray diffraction suggests that the pyt anionic ligands in 1 and 2 behave as thiolate and thione isomers, respectively, and display S- and μ-N_pyridyl, N_oxadiazole-binding fashions. Complex 1 shows a 1-D fishbone-like supramolecular array via strong aromatic stacking interactions between the discrete mononuclear coordination motifs, whereas 2 has a 2-D layered host coordination framework with the inclusion of bipy and water guests in the cavities.     

New members in the [Mn10] supertetrahedron family

Two manganese complexes, [Mn^II₄Mn^III₆Cl₄(CH₃OCH₂CH₂O)₁₂ O₄][Mn^II₃Ti^IVCl₆(CH₃OCH₂CH₂O)₆] (1) and [Mn^II₄Mn^III₆Cl₄(CH₃OCH₂CH₂O)₁₂O₄] [Mn₄^II Cl₁₀(CH₃OCH₂CH₂OH)₄]∙0.5CH₃OCH₂CH₂OH, (2) have been obtained and characterized by single-crystal X-ray diffraction. Both structures consist of the decametallic dicationic [Mn^II₄Mn^III₆Cl₄(CH₃OCH₂CH₂O)₁₂O₄]^2 + core constructed by four vertex-sharing [Mn^III₃Mn^IIO]^9 + tetrahedra. Also, these compounds contain the different tetrametallic dianions: [Mn^II₃Ti^IVCl₆(CH₃OCH₂CH₂O)₆]^2 − (in complex 1) and [Mn₄^IICl₁₀(CH₃OCH₂CH₂OH)₄]^2 − (in complex 2). Magnetic dc and ac susceptibility measurements for compound (1) show that the dicationic decanuclear magnetic cluster possesses an S = 12 ± 1 spin ground-state.     

Synthesis and electrochemical and in situ spectroelectrochemical characterization of manganese, vanadyl, and cobalt phthalocyanines with 2-naphthoxy substituents

Metallo (Mn, Co, VO) phthalocyanines bearing peripheral 2-naphthoxy groups were synthesized by cyclotetramerisation of the corresponding phthalonitrile derivative. The phthalocyanine compounds were characterized by elemental analyses, mass, FT-IR and UV–vis spectral data. Three intense bands in the electronic spectra clearly indicate the absorptions resulting from naphthyl groups along with the Q and B bands of the phthalocyanines. Electrochemical and spectroelectrochemical measurements exhibit that incorporation of redox active metal ions, Co^II and Mn^III, into the phthalocyanine core extends the redox capabilities of the Pc ring including the metal-based reduction and oxidation couples of the metal. Presence of molecular oxygen in the electrolyte system affects the voltammetric and spectroelectrochemical responses of the cobalt and manganese phthalocyanines due to the interaction between the complexes and molecular oxygen. Interaction reaction of oxygen with CoPc occurs via an “inner sphere” chemical catalysis process. While CoPc gives the intermediates [O₂⁻–Co^IIPc⁻²]⁻ and [O₂²–Co^IIPc⁻²]²⁻, MnPc forms μ-oxo MnPc species. An in situ electrocolorimetric method has been applied to investigate the color of the electro-generated anionic and cationic forms of the complexes for possible electrochromatic applications.     

Solvent-induced assembly of two supramolecular isomers of Mn thiophenedicarboxylate coordination polymers

Two supramolecular isomers of Mn^II thiophenedicarboxylate coordination polymers, namely, [Mn₂(tdc)₂(dmf)₂]_n (1) and [Mn₃(tdc)₃(dmf)₃]_n (2) (H₂tdc = 2,5-thiophenedicarboxylic acid, dmf = N,N-dimethylformamide), were synthesized with solvent-induced assembly method and the antiferromagnetic interactions between the Mn^II ions in their solid phase were measured.     

The synthesis,cyclic voltammetry and spectroelectrochemical studies of Co(II) phthalocyanines tetra-substituted at the α and β positions with phenylthio groups

Non-peripherally substituted cobalt 1,(4)-(tetraphenylthiophthalocyaninato) and peripherally substituted cobalt 2,(3)-(tetraphenylthiophthalocyaninato) complexes were synthesized. Redox processes were observed at E_1/2 = ?1.44 V (I), ?0.39 V (II), +0.37 V (III), +0.78 V (IV) and 1.15 V (V) for the non-peripherally substituted and at E_1/2 = ?1.42 V (I), ?0.57, ?0.39 V (II), +0.27 V (III), +0.79 V (IV) and +1.10 V (V) for the peripherally substituted complexes, respectively. The couples were assigned to Co^IPc^?2/Co^IPc^?3 (I), Co^IIPc^?2/Co^IPc^?2 (II), Co^IIIPc^?2/Co^IIPc^?2 (III), and Co^IIIPc^?1/Co^IIIPc^?2 (IV) using spectroelectrochemistry. The last process (V) could not be ascertained by spectroelectrochemistry but is associated with ring oxidation. Upon reduction or oxidation, the Q band of the non-peripherally substituted complex became less red shifted compared to that of its peripherally substituted counterpart.     

Activation of glassy carbon electrodes by photocatalytic pretreatment

This paper describes a simple and rapid photocatalytic pretreatment procedure that removes contaminants from glassy carbon (GC) surfaces. The effectiveness of TiO₂ mediated photocatalytic pretreatment procedure was compared to commonly used alumina polishing procedure. Cyclic voltammetric and chronocoulometric measurements were carried out to assess the changes in electrode reactivity by using four redox systems. Electrochemical measurements obtained on photocatalytically treated GC electrodes showed a more active surface relative to polished GC. In cyclic voltammograms of epinephrine, Fe(CN)₆^3−/4− and ferrocene redox systems, higher oxidation and reduction currents were observed. The heterogeneous electron transfer rate constants (k^o) were calculated for Fe(CN)₆^3−/4− and ferrocene which were greater for photocatalytic pretreatment. Chronocoulometry was performed in order to find the amount of adsorbed methylene blue onto the electrode and was calculated as 0.34 pmol cm⁻² for photocatalytically pretreated GC. The proposed photocatalytic GC electrode cleansing and activating pretreatment procedure was more effective than classical alumina polishing.     

A peculiar heterotrimetallic Mn–Co–Ni complex: Synthesis, crystal structure and magnetic properties

The first complex [Mn(H₂O)₆][NiCo(TTHA)(H₂O)₂] · 4H₂O 1 (TTHA⁶⁻ = triethylenetetraminehexaacetate) containing Mn^II–Co^II–Ni^II three different 3d metal ions is synthesized and magnetic measurement suggests that ferromagnetic interactions occur between Ni²⁺ ions and rarely found low-spin Co²⁺ ions.     

Zirconium phosphonate immobilized chiral amino alcohol for heterogeneous enantioselective addition of diethylzinc to benzaldehyde

The chiral (1R,2S)-(−)-2-amino-1,2-diphenylethanol and (1S,2R)-(+)-2-amino-1,2-diphenylethanol had been immobilized on the layered frame of zirconium phosphate to obtain zirconium phosphonates (1R,2S)-(−)-4a and (1S,2R)-(+)-4b. The enantioselective addition of Et₂Zn to benzaldehyde using zirconium phosphonates (1R,2S)-(−)-4a and (1S,2R)-(+)-4b as heterogeneous catalysts yielded secondary alcohol in 80.1% yield and e.e. values of up to 54.3%, which was only 7.6% e.e. lower than that using the corresponding ligands (1R,2S)-(−)-2a and (1S,2R)-(+)-2b as homogeneous catalysts. The zirconium phosphonates (1R,2S)-(−)-4a and (1S,2R)-(+)-4b were characterized by IR, SEM, XRD and TG analysis. SEM and XRD data showed that the catalysts (1S,2R)-(+)-4b and (1R,2S)-(−)-4a were in aggregate and mesopore structure with the same interlayer spacing 2.48 nm and pore diameter 5.6 nm.     

Rare monomeric structure of CpRh(III) dithiolene complex: Combined ESR and electronic absorption studies on electrochemically generated Rh(II) species

The [CpRh^III(mnt)] (1) (Cp = η⁵-cyclopentadienyl, mnt = maleonitrile-1,2-dithiolate) was characterized as a rare monomeric structure. The CV of 1 showed a reversible reduction wave which attributed to Rh(II)/Rh(III) couple. UV–Vis spectral measurement during electrolysis using an OTTLE cell indicated that lifetime of electrochemically generated 1⁻ (Rh(II) species) was only a few seconds. Isotropic (g_iso = 2.045, A_iso = 1.15 mT) and anisotropic ESR (g₁ = 2.173, a₁ = 1.85 mT, g₂ = 1.982, a₂ = 0.98 mT) spectra of 1⁻ were observed while electrochemical reduction of 1. Both ESR spectra showed hyperfine splittings due to the central Rh (I = 1/2).     

The dipeptide H-Aib-l-Ala-OH ligand in copper(II) chemistry: Variation of product identity as a function of pH

A systematic investigation of the influence of “pH” on the product identity from the Cu^II/H-Aib-l-Ala-OH (LH) reaction system is described, where H-Aib-l-Ala-OH is α-aminoisobutyryl-l-alanine. The pH variation has led to the synthesis of two discrete complexes, the structures of which have been determined by single-crystal X-ray crystallography. The “low pH” complex {[CuClL](H₂O)_2.5}_n (1) is a 3D coordination polymer, in which the dipeptide monoanion L⁻ behaves as a η¹:η¹:η¹:μ₂ ligand binding one Cu^II atom through its amino nitrogen and neutral peptide oxygen, and an adjacent Cu^II atom through one of its carboxylate oxygen. The “higher pH” complex {[Cu(H₋₁L)(EtOH)](EtOH)}_n (2) is a chain (1D) compound, in which the dipeptide dianion H₋₁L²⁻ uses its amino nitrogen, deprotonated peptide nitrogen and both carboxylate oxygens to bridge two metal centres.     

The first polypseudo-rotaxane structure based on the Wells–Dawson polyoxometalate

A polyoxometalate-based compound, (bix)[Cu(bix)][Cu₂(bix)₂(P₂W₁₈O₆₂)]·2H₂O (1) (bix = 1,4-bis(imidazol-1-ylmethyl)benzene), was hydrothermally synthesized, and characterized by elemental analyses, IR spectroscopy, thermogravimetric analysis, and single X-ray diffraction. Compound 1 exhibits the 1D + 1D polypseudo-rotaxane structure consists of two parts: the P₂W₁₈–Cu₂–(bix)₂ chain which contains 26-membered Cu₂(bix)₂ macrocycles and the 1D Cu-bix line. Remarkably, it represents the first polypseudo-rotaxane structure based on the Wells–Dawson polyoxometalate.     

Study of LiNi0.5Mn1.5O4 synthesized via a chloride-ammonia co-precipitation method: Electrochemical performance, diffusion coefficient and capacity loss mechanism

LiNi_0.5Mn_1.5O₄ powders are prepared via a new co-precipitation method. In this method, chloride salts are used as precursors and ammonia as a precipitator. The impurity of chlorine can be removed via a thermal decomposition of NH₄Cl in the subsequent calcination. X-ray diffraction pattern reveals that the final product is a pure spinel phase of LiNi_0.5Mn_1.5O₄. Scanning electron microscopy shows that the powders have an octahedron shape with a particle size of about 2 μm. Electrochemical test shows that the LiNi_0.5Mn_1.5O₄ powders exhibit an excellent cycling performance and after 300 cycles, the capacity retention is 83%. The lithium diffusion coefficient is measured to be 5.94 × 10⁻¹¹ cm² s⁻¹ at 4.1 V, 4.35 × 10⁻¹⁰ cm² s⁻¹ at 4.75 V and 7.0 × 10⁻¹⁰ cm² s⁻¹ at 4.86 V. The mechanism of capacity loss is also explored. After 300 cycles, the cell parameter ‘a’ decreases by 0.54% for the quenched sample (LiNi_0.5Mn_1.5O_4−δ) and by 0.42% for the annealed sample (LiNi_0.5Mn_1.5O₄). Besides, it is the first time to identify experimentally that the Ni and Mn ions dissolved in the electrolyte can be further deposited on the surface of anode.     

Effect of Al content on the electrochemical properties of Mg2−xAlxNi thin film hydride electrodes

Thin films of Mg_2−xAl_xNi alloys have been prepared by magnetron sputtering, and the effects of partial substitution of Al for Mg on the electrochemical properties of the films were studied. EIS results indicate the rate-limiting process for the thin film hydride electrode is the charge transfer reaction during the process of total discharge. A theoretical model has been derived for the impedance of a thin film hydride electrode based upon the assumption that hydrogen diffusion is neglected in the electrode. The charge-transfer reaction rate at the electrode surface and hydrogen diffusivity in the Mg_2−xAl_xNi thin film hydride electrodes were observed to initially decrease then increase with increasing Al content. Results from capacitance measurements indicate n-type semiconductor properties for the corrosion layer during the charge–discharge process. Hydrogen atom and OH⁻ transfer became more difficult with increasing Al content until x = 0.3, after which a significant drop in the barrier resistance was observed.     

Mechanistic Insights on the Formation of High-Valent MnIII/IV=O Species Using Oxygen as Oxidant: A Theoretical Perspective

High-valent metal−oxo species are of great interest as they serve as a robust catalyst for various organic transformations, and at the same time, they offer significant insight into the reactivity of various metalloenzymes. Formation of Mn−Oxo species is of great interest as they are involved in the Oxygen Evolving Complex of Photosystem II, and various bio-mimic models were synthesized to understand its reactivity. In this context, using urea decorated amine ligands, Borovik et al. have reported the facile formation of Mn^III=O and Mn^IV=O species from [Mn^IIH₂buea]²⁻ (here H2buea=tris[(N′-tert-butylureayl)-N-ethyl]amine) precursor complex using oxygen as the oxidant. While reactivity of these species is thoroughly studied, mechanism of formation of such species is scarcely explored. In this work, we have attempted to establish the formation of these species from the Mn^II precursor using the experimental conditions. Our calculations reveal the following fundamental steps in the formation of such species: i) O₂ activation by Mn^II lead to formation of Mn^II−superoxide species wherein the oxidation state of the Mn^II found to be intact upon O₂ binding facilitated by the deprotonated nitrogen atom present in the cavity (ii) in the second step, superoxo species is converted to Mn^II−hydroperoxo species, [Mn^IIH₂buea(OOH)]²⁻ using dimethylacetamide solvent as source for HAT reaction (iii) presence of water molecule found to aid the O−O bond cleavage in [Mn^IIH₂buea(OOH)]²⁻ species leading to the formation of the putative Mn^III=O species, [Mn^IIIH₃buea(O)]²⁻ (iv) one-electron oxidation of Mn^III=O, leads to the formation of [Mn^IVH₃buea(O)]⁻ species and this step is endothermic and need some external oxidants for its formation. While various spin-states and their roles are explored, our calculations reveal that the Mn atom prefers to be in the high-spin state across the potential energy surface studied. However, the nature of the formation is strongly correlated to the spin state arising from the radical nature present in the O₂ moiety and also in the deprotonated nitrogen atom. This offers a unique multistate reactivity channel for the formation these species easing various kinetic barriers across the potential energy surface. Further, we have also computed the spectral parameters for the experimentally observed species, which are in agreement with the reported data offering confidence on the mechanism established. To this end, our study unveils a facile formation of high-valent Mn−Oxo species using O₂ as oxidant and role of water molecules in the formation of such species, and these mechanistic insights are likely to have implications beyond the example studied here.     

Surface chemistry and electrocatalytic behaviour of tetra-carboxy substituted iron, cobalt and manganese phthalocyanine monolayers on gold electrode

Surface chemistry and electrocatalytic properties of self-assembled monolayers of metal tetra-carboxylic acid phthalocyanine complexes with cobalt (Co), iron (Fe) and manganese (Mn) as central metal ions have been studied. These phthalocyanine molecules are immobilized on gold electrode via the coupling reaction between the ring substituents and pre-formed mercaptoethanol self-assembled monolayer (Au-ME SAM). X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy confirmed chemisorption of mercaptoethanol via sulfur group on gold electrode and also coupling reaction between phthalocyanines and Au-ME SAM. Electrochemical parameters of the immobilized molecules show that these molecules are densely packed with a perpendicular orientation. The potential applications of the gold modified electrodes were investigated towards l-cysteine detection and the analysis at phthalocyanine SAMs. Cobalt and iron tetra-carboxylic acid phthalocyanine monolayers showed good oxidation peak for l-cysteine at potentials where metal oxidation (M^III/M^II) takes place and this metal oxidation mediates the catalytic oxidation of l-cysteine. Manganese tetra-carboxylic acid phthalocyanine monolayer also exhibited a good catalytic oxidation peak towards l-cysteine at potentials where Mn^IV/Mn^III redox peak occurs and this redox peak mediates l-cysteine oxidation. The analysis of cysteine at phthalocyanine monolayers displayed good analytical parameters with good detection limits of the orders of 10⁻⁷ mol L⁻¹ and good linearity for a studied concentration range up to 60 μmol L⁻¹.