Nanoelectronics from the bottom up

Electronics obtained through the bottom-up approach of molecular-level control of material composition and structure may lead to devices and fabrication strategies not possible with top-down methods. This review presents a brief summary of bottom-up and hybrid bottom-up/top-down strategies for nanoelectronics with an emphasis on memories based on the crossbar motif. First, we will discuss representative electromechanical and resistance-change memory devices based on carbon nanotube and core-shell nanowire structures, respectively. These device structures show robust switching, promising performance metrics and the potential for terabit-scale density. Second, we will review architectures being developed for circuit-level integration, hybrid crossbar/CMOS circuits and array-based systems, including experimental demonstrations of key concepts such lithography-independent, chemically coded stochastic demultipluxers. Finally, bottom-up fabrication approaches, including the opportunity for assembly of three-dimensional, vertically integrated multifunctional circuits, will be critically discussed.     

Synthesis of glasses from gels: the problem of monolithic gels

The synthesis of glasses from gels has recently aroused considerable interest both from the theoretical and practical standpoint. The conditions of gel formation which determine the structure of the wet gel are first examined. During the drying process, which is a decisive step in the obtention of monolithic gels, an essential role is played by capillary forces. It is shown that, among the various methods of obtaining monolithic gels, that based on the hypercritical evacuation of the solvent is the most reliable.     

“top down”和“bottom up”——评我国纳米科技发展的导向问题

纳米科技有“top down”和“bottom up”两种研究方法,这两种研究方法中“top down”方法是今后一个时期的主要科研方法,但是决不能忽略甚至放弃“bottom up”方法的探索和研究,因为“bottom up”方法代表着纳米科技发展的未来。这是对我国纳米科技发展策略的挑战。     

Permeation of piroxicam from the poloxamer gels

Topical formulations of piroxicam were prepared using poloxamer 407 or poloxamer 188 by a cold method, and the permeation characteristics of piroxicam were evaluated. The permeation rate of piroxicam across the synthetic cellulose membrane and the rat skin decreased as the concentration of poloxamer increased. Though poloxamer gel exhibits reversed thermal behavior, the permeation rate of piroxicam increased with increasing temperature, indicating that the diffusional pathway of piroxicam is a water channel within the gel formulation. The pH of the gel did not affect the permeation rate of piroxicam significantly. As the concentration of piroxicam in the gel formulation increased, the permeation rate of piroxicam increased up to 1% and reached a plateau above 1%. Among various enhancers tested, polyoxyethylene-2-oleyl ether showed the highest enhancing effect, with an enhancement ratio of 2.84. Based on experimental results, the permeation rate of piroxicam can be controlled by changing the poloxamer concentration or drug concentration and by the addition of an appropriate enhancer.     

Six-helix bundles designed from DNA

We present a designed cyclic DNA motif that consists of six DNA double helices that are connected to each other at two crossover sites. DNA double helices with 10.5 nucleotide pairs per turn facilitate the programming of DNA double crossover molecules to form hexagonally symmetric arrangements when the crossover points are separated by seven or fourteen nucleotide pairs. We demonstrate by atomic force microscopy well-formed arrays of hexagonal six-helix bundle motifs both in 1D and in 2D.     

Alloy catalysts designed from first principles

The rational design of pure and alloy metal catalysts from fundamental principles has the potential to yield catalysts of greatly improved activity and selectivity. A promising area of research concerns the role that near-surface alloys (NSAs) can play in endowing surfaces with novel catalytic properties. NSAs are defined as alloys wherein a solute metal is present near the surface of a host metal in concentrations different from the bulk; here we use density functional theory calculations to introduce a new class of these alloys that can yield superior catalytic behaviour for hydrogen-related reactions. Some of these NSAs bind atomic hydrogen (H) as weakly as the noble metals (Cu, Au) while, at the same time, dissociating H(2) much more easily. This unique set of properties may permit these alloys to serve as low-temperature, highly selective catalysts for pharmaceuticals production and as robust fuel-cell anodes.     

羧基化聚醚有机硅及其构筑的超分子膜

利用Si-H封端的聚二甲基硅氧烷(PHMS)与烯丙基聚氧乙烯聚氧丙烯醚(F6)的硅氢化加成反应合成聚醚-b-聚硅氧烷中间体(PESO),再用马来酸酐对其进一步改性,合成了羧基化聚醚有机硅(CPES),用红外光谱(IR)、核磁共振氢谱(1H-NMR)确认了CPES的结构,然后用原子力显微镜(AFM)对基于CPES及其构筑的超分子膜形貌进行了研究.结果表明,由CPES与N-β-氨乙基γ-氨丙基聚二甲基硅氧烷(ASO-1)在乙酸乙酯稀溶剂介质中自组装构筑的超分子膜CPES/ASO-1,其形貌完全不同于结构基元CPES与ASO-1,在其表面不仅有众多细小亮斑存在,而且还分布有一定数目形体较大、环形亮斑套有小亮斑的分子聚集体.其原因可能是离子化后的CPES胶束在ASO-1分子周围发生单层或多层吸附、团聚而产生的.     

Deployable membranes designed from folding tree leaves

A simple model of deploying tree leaves is assembled in different arrangements to produce polygonal foldable membranes for use as deployable structures. One family of folding patterns exhibits a small strain mechanism, which is investigated. Variations on the basic arrangements can be used to fold membranes with a discretized curvature.     

Preparation and release of ibuprofen from polyacrylamide gels

The conditions of preparation of polyacrylamide (polyAC) gels, the incorporation of ibuprofen (IB), and the kinetics of IB release under various conditions have been evaluated. Transparent, opaque, or elastic gels were prepared depending on the concentration of acrylamide (AC) and the cross-linking agent, N,N'-methylenebisacrylamide (BIS). Release studies in media below pH 5.0 resulted in opaque gels. The kinetics of IB release was a function of the AC, BIS, and the pH of the medium, but the optimum composition, in terms of gel integrity and release characteristics, was 7% AC cross-linked with BIS at a 50:1 ratio. Modulation of the release rate was possible with the incorporation of 10% of certain polymers. The amount of IB that could be incorporated per gram of transparent gel was a function of the amount of polymer initiator N,N,N',N'-tetramethylene diamine (TEMED) used per gram of gel. More than 200 mg of IB could be incorporated per gram of transparent gel by using 100 microliters of TEMED. The release of IB obeyed matrix/swelling-controlled kinetics and 70-80% of the IB was released from gels containing 10 to 40 mg IB per gram of gel in 5 hr at pH 7.4 and 37 degrees C.     

The evolution of vesicles from bulk lamellar gels

The remarkable ability of phospholipids to generate vesicles and lamellar morphologies has been mimicked by amphiphilic block copolymers and both classes of amphiphiles have been extensively studied in bulk and in dilute solution. The most common vesicle preparation method involves diffusion of water into a lamellar gel. The transformation proceeds from a collection of water-poor planar lamellae, to a water-rich interconnected layer-phase and then a collection of closed lamellae (vesicles) that form a close-packed gel. This is demonstrated by scattering and microscopy with the evolution of the gel structure being driven by increasing curvature. Vesicles have been observed to form when the copolymer-water system still has long-range order, with a discrete, clustered-vesicle structure leading to a turbid dispersion. Eventually, at very low concentration, the packed vesicles separate, generating very stable isotropic dispersions that are transparent. This phase sequence, involving a dispersion of close-packed vesicles, accounts for the formation of a narrow size distribution in these systems.     

Mass spectrometry of proteins directly from polyacrylamide gels

The direct combination of thin-layer gel electrophoresis and matrix-assisted laser desorption/ionization mass spectrometry has been demonstrated with good sensitivity and mass accuracy, offering potential advantages in speed and reduced complexity. Mass spectra have been obtained from isoelectric focusing, sodium dodecyl sulfate, and native gels with as little as 660 fmol of α- and β-chain bovine hemoglobin and 1 pmol of horse heart myoglobin loaded. CNBr digests were performed in situ, and the products were probed in-gel. Noncovalent complexes such as multimeric protein systems, enzyme inhibitor complexes, and protein-ligand complexes can also be characterized when gel electrophoresis is run under nondenaturing conditions. This approach shows promise for simplifying the interface between gel electrophoresis and mass spectrometry.     

Resistive switching in copper oxide nanorods: a bottom up approach applicable for enhanced scalability

Reversible, stable and reproducible resistive switching in a parallel network of Cu2O nanorods, observed in the present study, highlights the advantages of using nanorods in comparison to normally used thin films. Unipolar and symmetric current-voltage characteristics of the metal/insulator/metal structure consisting of Hg top contact/Copper oxide (Cu2O) nanorods/Ag bottom contact in a sandwich configuration shows electroforming at about 11 V, reproducible reset and set points at 0.53 +/- 0.03 and 4.2 +/- 0.02 V and a high OFF/ON resistance ratio > 10(3). Slope of current-voltage characteristics and current contrast in CAFM mapping indicate that filamentary conduction mechanism is responsible for resistive switching. This study sets the foundation for fabricating a nanorods based resistive random access memory device and thus a manifold increase in the device scalability.