6,7-甲氧基香豆素冠醚双功能化杯【4】芳烃的合成与表征

以对叔丁基杯[4]芳烃为原料,经碱催化两步合成了26,28-二（6,7-二甲氧基香豆素-4-亚甲基）-5,11,17,23-四叔丁基杯[4]芳烃-25,27-冠-6,产物经IR、^1H NMR表征和元素分析表征,该衍生物为锥形结构并与设计思想一致。     

芘冠醚双功能化杯[4]芳烃的合成与表征

以杯[4]芳烃为原料,经碱催化合成了26,28-双(1-乙酰基芘)-5,11,17,23-四叔丁基杯[4]-冠-6,产物结构经IR、1HNMR和元素分析表征。该衍生物为锥形结构。     

含金刚烷胺的杯［4］芳烃衍生物的合成及抗菌活性研究

对叔丁基杯[4]芳烃与对甲苯磺酸酯基乙氧基对苯甲醛反应生成对叔丁基杯[4]芳烃-1,3-二醛基衍生物1,对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与金刚烷胺进行分子间缩合反应得到含金刚烷基的新型杯[4]芳烃衍生物,并利用1H NMR,13C NMR,MS和元素分析对目标化合物的结构进行了表征。初步的抗菌试验表明,该化合物表现出较好的抑菌活性。     

含杯[4]芳烃的金刚烷甲酰腙的合成及抗菌活性研究

对叔丁基杯[4]芳烃与对甲苯磺酸酯基乙氧基对苯甲醛反应生成对叔丁基杯[4]芳烃-1,3-二醛基衍生物1,对叔丁基杯[4]芳烃-1,3-二醛基衍生物1与金刚烷甲酰肼进行分子间缩合反应得到含杯[4]芳烃的金刚烷甲酰腙化合物2,并利用1H NMR,13C NMR,MS和元素分析对目标化合物的结构进行了表征。初步的抗菌试验表明,该化合物表现出较好的抗菌活性。     

氨基苯甲酸酯杯[4]芳烃衍生物的合成及性能研究

以对叔丁基杯[4]芳烃为原料,与1,2-二溴乙烷反应得到25,27-二(2-溴乙氧基)-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃,分别与苯佐卡因、三卡因、盐酸普鲁卡因在K2CO3、Na I/DMF体系中反应,以48%~63%的产率合成了3种新型含氨基苯甲酸酯结构的杯[4]芳烃衍生物——25,27-二(2-(对乙氧羰基苯基)氨基)乙氧基-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃、25,27-二(2-(3-乙氧羰基苯基)氨基)乙氧基-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃和25,27-二(2-(4-(2-(二乙基氨基))乙氧羰基苯基)氨基)乙氧基-26,28-二羟基-5,11,17,23-四叔丁基杯[4]芳烃。新化合物的结构与构象经元素分析、IR、1HNMR表征证实。研究它们对K+、Pb2+等9种金属离子的萃取性能以及对氨基酸的分子识别作用。结果表明,新型杯[4]芳烃衍生物对过渡金属离子具有良好的萃取效果,对Fe2+、Cu2+、Pb2+、Zn2+、Ag+的萃取率高达90%以上;同时与氨基酸也能发生很好的配合作用,能有效地识别氨基酸,对带芳环的氨基酸比脂肪氨基酸的识别效果更好。     

几种新型杯[4]芳烃衍生物的合成

以对叔丁基苯酚为起始原料,通过缩合、一步取代反应合成了对叔丁基杯[4]芳烃的衍生物,两步取代反应合成了对叔丁基杯[4]芳烃的衍生物。用FT-IR,^1HNMR,FAB-MS对产物的结构进行了表征。     

杯芳烃的合成及其对二氧化碳的吸附研究

以对叔丁基苯酚和甲醛溶液为原料,在酸碱条件下采用两步法合成杯[4]芳烃和杯[6]芳烃,并对这两种产物进行了结构表征。同时将合成的杯芳烃进行了对二氧化碳的吸附,发现对叔丁基杯[6]芳烃对二氧化碳的吸附百分比为1．516％。     

一种杯[4]芳烃衍生物的合成及工艺优化

以对叔丁基苯酚和甲醛为原料,经两步反应制得5,11,17,23-四叔丁基-25,27-二(乙氧基羰基甲氧基)-26,28-二羟基杯[4]芳烃。通过红外光谱和1H NMR确证了5,11,17,23-四叔丁基-25,27-二(乙氧基羰基甲氧基)-26,28-二羟基杯[4]芳烃,优化了第二步合成工艺,得到了最佳工艺条件,两步反应总收率达到了61%。     

新型氮杂杯[4]芳烃衍生物的合成

以对叔丁基杯[4]芳烃为原料,对其下沿的酚羟基进行化学修饰,通过取代、加氢脱苄基等反应合成了尚未见报道的新型氮杂杯[4]芳烃衍生物。其结构经1 HNMR,13 CNMR和HRMS(ESI)表征。     

杯[4]芳烃偶氮衍生物的合成及其金属离子萃取性能

杯芳烃作为超分子化学的重要组成部分,近年来得到了快速发展并成为化学家的研究热点。以脱叔丁基-杯[4]芳烃为原料合成了杯[4]芳烃偶氮衍生物,其结构经IR和1H NMR所表征。研究了该主体分子对金属离子的萃取性能,实验结果表明,该主体分子对Mg2＋具有较高的萃取作用。讨论了主客体间配位作用的机制。     

Conductivities of AlCl3/Ionic Liquid Systems and Their Application in Electrodeposition of Aluminium

Solubilities and conductivities of anhydrous AlCl3 in six kinds of ionic liquids (ILs) were measured. Among the six kinds of ILs [bmim]Cl, [bmim]Br, [bmim]BF4, [bmim]PF6, [emim][EtSO4] and [bmim][HSO4], anhydrous AlCl3 could be dissolved in the first five kinds but was hardly dissolved in [bmim][HSO4]. The results showed that the nominal solubilities of AlCl3 in ILs increased in the order of [bmim][HSO4] < [bmim]PF6 < [emim][EtSO4] < [bmim]BF4 < [bmim]Cl < [bmim]Br. Conductivities of the AlCl3/ILs systems depended apparently on the nominal molar ratio of AlCl3 to ILs. The conductivities of AlCl3/[bmim]Cl, AlCl3/[bmim]Br and AlCl3/[bmim]PF6 systems had a similar tendency as a function of the nominal molar ratio, that is, as the molar ratio was increased, conductivities increased first and then decreased, with the maximum conductivity obtained at approximately 0.9:1, 1.0:1 and 0.5:1, respectively. Conductivities of the AlCl3/[bmim]BF4 exhibited a dentate change and decreased with the molar ratio of AlCl3 to [bmim]BF4 increasing in general. With the increasing of the anhydrous AlCl3 amount in [emim][EtSO4], conductivity of AlCl3/[emim][EtSO4] monotonically decreased. AlCl3/[bmim]Cl system was chosen as the electrolyte for the electrodeposition of Al. Preliminary experimental results showed that dense, adherent and homogeneous Al coatings could be electrodeposited on stainless steel by means of constant potential technique and the surface coverage was quite satisfactory.     

对叔丁基杯[4]及杯[6]芳烃的合成及其对铜离子的萃取研究

以对叔丁基苯酚和甲醛为原料,分别对对叔丁基杯[4]及杯[6]芳烃的合成和萃取性质进行了研究．结果表明,在本研究范围内,以KOH为催化剂,对叔丁基杯[6]芳烃的最高产率为77．8％;以NaOH为催化剂,对叔丁基杯[4]芳烃的最高产率为47．3％。对于对叔丁基杯[4]和杯[6]芳烃,最佳的反应回流温度都为140℃。对叔丁基杯[6]芳烃对模拟废水中的铜离子具有一定的萃取效果,最高萃取率为70．3％。     

Characterization of polypyrrole/azocalix[4]arene salts: Electrical properties and thermal stability

Polypyrrole (PPy) was doped with the azocalix[4]arene [(5,11,17,23‐tetrakis[(p‐carboxyphenyl)azo]25,26,27,28‐tetrahydroxycalix[4]arene)] host species. PPy/azocalix[4]arene salts were characterized by FTIR, TGA, SEM, X‐ray diffraction, and conductivity measurements. The properties of PPy were investigated in the presence of azocalix[4]arene host species. The conductivity of PPy increased in the presence of azocalix[4]arene. TGA results indicated that the PPy/azocalix[4]arene salts have higher thermal stability than PPy. It was observed from SEM analysis that the particle diameter of PPy decreased with increasing content of azocalix[4]arene. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

新型四氢吡啶并[4,3-d]嘧啶化合物的合成及生物活性

[目的]为寻找具有较高生物活性的四氢吡啶并[4,3-d]嘧啶类农药先导化合物.[方法]以4-哌啶酮-3-羧酸乙酯盐酸盐和2,4-二氯嘧啶为初始原料,采用微波辅助技术,经3步反应,合成了16个四氢吡啶并[4,3-d]嘧啶化合物Va1～Vd4,其结构经1H NMR、元素分析及高分辨质谱确证且进行杀菌活性测定.[结果]目标化...     

甲基丙烯醛、甲醇与[BMIM]BF4二元体系的气液相平衡

测定了常压下甲基丙烯醛、甲醇与[BMIM]BF4二元体系在350.75, 341.55和331.55 K下的气液相平衡数据,并采用非无序双液(Non-random Tow-liquid Model, NRTL)模型对实验数据进行了关联. 实验结果表明,甲基丙烯醛和甲醇在离子液体[BMIM]BF4中的溶解度均随温度的升高而减小,随压力的升高而增大;甲基丙烯醛-[BMIM]BF4体系相对于理想溶液产生正偏差,甲醇-[BMIM]BF4体系相对于理想溶液产生负偏差. NRTL模型的关联结果与实验值吻合较好,甲基丙烯醛-[BMIM]BF4体系关联的平均偏差为1.20%,甲醇-[BMIM]BF4体系关联的平均偏差为0.42%.     

Polycyclic Aromatic Hydrocarbons (PAHs) Occurrence and Toxicity in Camellia sinensis and Herbal Tea

ABSTRACT

This study describes a survey of polycyclic aromatic hydrocarbon (PAH) concentrations in 23 green, herbal, and black tea brands widely consumed in Nigeria by determining the levels of benzo[a]pyrene, chrysene (PAH2), benzo[a]pyrene, chrysene, benz[a]anthracene, benzo[b]fluoranthene (PAH4), benzo[a]pyrene, benz[a]anthracene, benzo[k]fluoranthene, chrysene, benzo[b]fluoranthene, dibenz[ah]anthracene, benzo[ghi]per-ylene and indeno[1,2,3-cd]pyrene (PA-H8). Toxic equivalence factor and mutagenic equivalence factor were applied to evaluate the toxic equivalence and mutagenic equivalence quotients relative to benzo[a]pyrene. The concentrations of PAHs indicate that Regulation 835/2011/EC was not fulfilled by benzo[a]anthracene, B[a]A, benzo[a]pyrene, B[a]P, benzo[b]fluoranthene, B[b]F, and chrysene, CHR. The PAH4 levels ranged from 1.28 to 44.57, 4.34 to 11.20, and 0.76 to 34.82 µg/kg in green, black, and herbal tea products, respectively. On the other hand, the PAH8 concentration varied between 1.63 and 65.73, 5.02 and 68.83, and 12.43 and 24.92 µg/kg in green, herbal, and black tea samples. The PAH4 and PAH8 provide more reliable indicators for determination of PAH contamination and risk characterization in food than PAH2.     

离子液体萃取精馏技术在甲醇-碳酸二甲酯分离中的应用

针对甲醇-碳酸二甲酯共沸物分离难题,采用萃取精馏技术并以离子液体3-辛基-1-甲基四氟硼酸盐（[omim][BF₄]）为萃取剂进行流程设计和Aspen Plus模拟。根据气液相平衡数据回归了NRTL气液模型的二元交互参数,确保模拟结果准确。通过优化萃取剂用量、最佳回流比、进料位置和闪蒸塔的工艺条件等操作参数,实现了甲醇和碳酸二甲酯有效分离,并使产品质量分数达到99.5%以上。通过与草酸二甲酯作为萃取剂的工艺进行对比,发现[omim][BF₄]工艺对分离设备要求更低、萃取剂用量更小,且分离能耗相当。经济分析结果则表明,[omim][BF₄]工艺塔费用和填料费用分别为草酸二甲酯工艺的78%和37%,在设备投资上具有一定优势;但工艺能耗费用增加4%,萃取剂费用为草酸二甲酯费用的6.5倍,最终年总花费与草酸二甲酯工艺相当。因此,[omim][BF₄]工艺用于甲醇-碳酸二甲酯萃取精馏具有一定的应用前景。     

Synthesis,Thermal Stability and Impact Stability of Novel Tetranitro‐Dipyridotetraazapentalene Derivatives

The synthetic details for the construction of three new dipyridotetraazapentalene derivatives, 5H‐pyrido[3″,4″:4′,5′] [1,2,3]triazolo‐ [1′,2′:1,2][1,2,3]triazolo[5,4‐b]pyridin‐6‐ium inner salt ( 8 ), 5H‐pyrido[3″,2″:4′,5′] [1,2,3]triazolo[1′,2′:1,2] [1,2,3]triazolo[5,4‐b]‐pyridin‐6‐ium inner salt ( 15 ) and 5H‐pyrido[2″,3″:4′,5′] [1,2,3]‐triazolo[1′,2′:1,2][1,2,3]triazolo[4,5‐b]pyridin‐6‐ium inner salt ( 16 ) are presented. Nitration of ( 8 ) and ( 15 ) afforded the novel tetranitrodipyridotetraazapentalene derivatives, 2,4,8,10‐tetranitro‐5H‐pyrido[3″,4″:4′,5′][1,2,3]triazolo[1′,2′:1,2][1,2,3]‐triazolo[5,4‐b]‐pyridin‐6‐ium inner salt ( 3 ) and 2,4,8,10‐tetranitro‐5H‐pyrido[3″,2″:4′,5′][1,2,3]triazolo[1′,2′:1,2][1,2,3]‐triazolo[5,4‐b]‐pyridin‐6‐ium inner salt ( 4 ) in good yields. Both isomers, ( 3 ) and ( 4 ), exhibited high thermal stability (differential scanning calorimetric analysis and thermal gravimetric analysis) and were insensitive to impact (hammer/anvil test).     

离子液体用于燃油萃取脱硫的选择与过程优化

针对基于COSMO-SAC模型分子设计方法的准确性问题,采用离子液体脱硫机理分析和实验的方法对其进行了验证,即对[HMIM] [BF₄]、[HMIM] [PF₆]、[BMIM] [BF₄]、[BMIM] [PF₆]、[EMIM] [BF₄]、[EMIM] [PF₆] 6种离子液体作萃取剂时的脱硫效果进行了脱硫机理的分析和实验的验证,得到的脱硫性能排序与离子液体分子设计结果基本一致,且均认为[HMIM] [PF₆]脱硫率较高。以[HMIM] [PF₆]为萃取剂,通过液相色谱法测定萃取后的液相组成,考察萃取时间、萃取温度、剂油比3个因素对脱硫率、分配系数和选择性系数的影响。通过正交实验设计确定了萃取时间40 min、萃取温度20℃、剂油比2：1为较优操作条件,单次脱硫率为72.74%,四级萃取可将模型油的含硫量由1200 μg·g^-1降至6.98 μg·g^-1,符合国Ⅴ标准。     

磁性离子液体1-甲基-3-烷基咪唑四卤化铁盐的合成及其物性表征

合成了4种1-甲基-3-烷基咪唑四氯化铁盐[Cnmim]FeCl4(n=2, 4, 6, 8)及3种1-甲基-3-丁基咪唑四卤化铁([C4mim]FeX4, X=Cl, Br)磁性离子液体,光谱结果表明,[Cnmim]FeCl4及[C4mim]FeBr4中阴离子单一,而[C4mim]FeClBr3及[C4mim]FeCl3Br中的阴离子为FeBr4-, FeBr3Cl-, FeCl2Br2-, FeCl3Br-, FeCl4-的混合物. 测定了其密度、粘度、电导率,磁性离子液体密度较大,25℃时为1.25~1.94 g/cm3;粘度较小,25℃时为21~65 mPa×s;电导率较大,30℃时为0.23~1.37 S/m. 并研究了其物性随温度及结构的变化规律.