Bread from common cereal cultivars contains an important array of neglected bioactive benzoxazinoids

Bread is consumed in large quantities all over the world, and rye bread is especially popular throughout the Nordic countries. Wholemeal bread is highly recommended as a basic ingredient in daily food, because wholemeal food products generally promote good health due to their vitamin, mineral and fibre content. The literature suggests that wholemeal products have other health-promoting effects even if the ingredients responsible have not been identified. Benzoxazinoids are a group of natural products that have not previously been reported in mature grains. Here, we report for the first time the identity and quantity of 10 compounds of the benzoxazinoid family in mature grains, hydrothermally processed grains of durum wheat (Triticum durum, cv. Kamut), a commercial variety of rye (Secale cereale cv. Picasso) and an old Nordic rye landrace (S. cereale, Svedjerug), as well as in bread baked with flour milled from those grains. Concentrations of the 10 benzoxanoids were determined using LC–MS/MS and ranged from 0 to 348 nmol g⁻¹ for conventional flour, to 772–1177 nmol g⁻¹ in bread baked with flour from hydrothermally processed grains and to 3116–5570 nmol g⁻¹ in flour from hydrothermally processed grains. Benzoxazinoids possess documented physiological effects, and research into the importance of these compounds in the daily diet is therefore needed. Ongoing studies in our lab on the uptake and transformation of benzoxazinoids in mammals will be reported in the near future.     

Optimization of ingredients and baking process for improved wholemeal oat bread quality

Baking technology for tasty bread with high wholemeal oat content and good texture was developed. Bread was baked with a straight baking process using whole grain oat (51/100 g flour) and white wheat (49/100 g four). The effects of gluten and water content, dough mixing time, proofing temperature and time, and baking conditions on bread quality were investigated using response surface methodology with a central composite design. Response variables measured were specific volume, instrumental crumb hardness, and sensory texture, mouthfeel, and flavour. The concentration and molecular weight distribution of β-glucan were analysed both from the flours and the bread. Light microscopy was used to locate β-glucan in the bread. Proofing conditions, gluten, and water content had a major effect on specific volume and hardness of the oat bread. The sensory crumb properties were mainly affected by ingredients, whereas processing conditions exhibited their main effects on crust properties and richness of the crumb flavour. β-glucan content of oat bread was 1.3/100 g bread. The proportion of the highest molecular weight fraction of β-glucan was decreased as compared with the original β-glucan content of oat/wheat flour. A great part of β-glucan in bread was located in the large bran pieces.     

Production of acidic extruded rice flour and its influence on the qualities of gluten-free bread

One of the greatest technological challenges in the production of gluten-free bread (GFB) is to find a low-cost ingredient capable of retaining gas during fermentation and the baking process. The use of gelatinized starch appears to show promise for this purpose. In this study, GFB was made using raw rice flour (100 g) with the addition of 10 g acidic extruded rice flour (AERF). The AERF was produced in a single-screw extruder, varying the extrusion temperature and lactic acid concentration. Response surface methodology (RSM) and the principle components analysis (PCA) were used to analyze the results. The results of RSM showed no significant difference, but the mean volume obtained with the AERF (1.95 mL g⁻¹) was still low when compared with that of wheat bread (6 mL g⁻¹). The crust and crumb colors and the texture (hardness = 173 g; chewiness = 90.5 and fracturability = 178) presented results similar to those of wheat bread and better than other GFB found in the literature. When analyzed by PCA the AERF obtained at 150 °C-0.5 mol L⁻¹ lactic acid, showed the best results for the GFB obtained. IR spectroscopy showed that no bands were found for esters (1740 cm⁻¹) in the AERFs, which could indicate that no new bonds were formed between the rice flour and the lactic acid.     

Kinetics of tocols degradation during the storage of einkorn (Triticum monococcum L. ssp. monococcum) and breadwheat (Triticum aestivum L. ssp. aestivum) flours

The kinetics of tocols degradation in wholemeal and white flours from einkorn cv Monlis and bread wheat cv Serio were studied during storage at five different temperatures (−20, 5, 20, 30 and 38 °C) up to 242 days. Tocols decreased as a function of time and temperature, following first-order kinetics. Degradation rates and their dependence upon temperature were similar for the two Triticum species studied. Tocols decrease was quicker in white flour than in wholemeal flour (on average for total tocols at 38 °C, k = 7.79 × 10⁻³ days⁻¹ vs 3.15 × 10⁻³ days⁻¹, respectively). The temperature-dependent degradation was similar for all homologues (Ea = 34.3–49.4 kJ/mol) except for α-T, less thermostable in white flours (Ea = 61.2 kJ/mol in einkorn and Ea = 54.7 kJ/mol in bread wheat).     

Effects of two barley β-glucan isolates on wheat flour dough and bread properties

The effects of wheat flour fortification with two different molecular weight barley β-glucan isolates (1.00 × 10⁵, BG-100 and 2.03 × 10⁵, BG-200) on the rheological properties of dough and bread characteristics, using flours from two wheat cultivars that differ in their breadmaking quality, have been examined. The farinograph water absorption of doughs and the moisture content and water activity of the breads increased with increasing β-glucan content; the β-glucan isolate with the higher molecular weight (BG-200) exerted a greater effect than did BG-100. The addition of β-glucans to the dough formula increased the development time, the stability, the resistance to deformation and the extensibility of the poor breadmaking quality doughs, as well as the specific volumes of the respective breads, exceeding even that of the good breadmaking cultivar. Furthermore, the colour of the bread crumbs got darker and their structure became coarser, whereas the bread crumb firmness decreased with increasing level of β-glucan addition. Generally, the BG-200 was more effective in increasing the specific bread volume and reducing the crumb firmness, especially when used to fortify the poor breadmaking quality flour. The results further indicate a requirement for optimisation of the fortified doughs (level and molecular size of the β-glucan) to maximise bread quality attributes (loaf volume, texture, and staling events).     

Combined effects of inulin,pectin and guar gum on the quality and stability of partially baked frozen bread

Many attempts have been made to increase the nutritional value of bread by adding dietary fibre. However, fibre enrichment is usually associated with various technological problems. The aim of this study was to optimise the composition of a blend of inulin, pectin and guar gum to enrich the fibre content of partially baked frozen bread without impairing its technological quality. We prepared 20 formulations following a central composite design, together with 4 control breads. Bread enriched with inulin had higher crumb hardness, lower specific volume, shape, moisture content, and crumb cohesiveness than control bread, but improved flavour. Pectin and guar improved moisture content and crumb cohesiveness. There was no interaction between inulin and pectin for any of the bread attributes investigated, while interactions between inulin and guar were small. In contrast, guar and pectin significantly interacted to decrease volume and increase crumb hardness and chewiness. A desirability function method identified the optimised blend as containing 3% inulin, 0.9–1% pectin and 0.3–0.4% guar. Bread enriched with such blend had the following characteristics: specific volume, 4.06 cm³/g; shape, 0.63; crumb hardness, 189 g; resilience, 0.36; cohesiveness, 0.84; chewiness, 169 g; and flavour score, 4.6. Experimental values were close to the predicted ones, with prediction errors below 10% for all attributes tested. The specific volume, crumb hardness and chewiness of the enriched bread were superior to those of unenriched bread. However, undesirable textural changes occurred in the enriched bread during 12 weeks of frozen storage, and these changes strongly depended on the fibre blend composition.     

Effect of dietary fiber from sugarcane bagasse and sucrose ester on dough and bread properties

The suitability of an emulsifier, sucrose ester, to enhance the proportion of dietary fiber in white pan bread was examined. The substitution of dietary fiber from sugarcane bagasse and a commercial dietary fiber (Solka Floc^® 900) were varied from 0 to 15 g/100 g of wheat flour mass. Expansion and stickiness of dough, volume, specific volume, firmness and springiness of bread, including sensory evaluation all decreased as each of dietary fiber increased. Bread properties improved with sucrose ester addition. Bread made by 10 g/100 g of each dietary fiber substitution, was scored favorable by consumer when sugar ester was added at 1.5 g/100 g as wheat flour mass.     

Sourdough on quinoa and buckwheat gluten-free breads: Evaluation of autochthonous starter fermentation on bread nutritional and technological properties

The aim of this work was to evaluate the effect of two autochthonous strains of lactic acid bacteria as sourdough (SD) starters on gluten-free bread technological quality and in vitro starch hydrolysis and antioxidant activity. Two strains of Limosilactobacillus fermentum isolated from buckwheat (BW) and quinoa flours were used. SDs were prepared from wholegrain quinoa or BW flours. Bread technological properties, total polyphenol content and in vitro antioxidant activity and starch hydrolysis and dialysability were assessed. Specific bread volumes were between 2.61 and 2.76 cm³ g⁻¹. Breads with quinoa-based SD had overall higher technological quality than breads made with BW SDs, shown by a softer, well-aerated crumb, with an opener crumb structure and larger air area. Crumb firming during storage was reduced up to 29% when quinoa SD was used, and up to 42% when BW SD was added. Quinoa breads showed higher polyphenols and FRAP values, whereas BW breads had significantly higher ABTS values. Total starch hydrolysis and dialysability were significantly reduced when SD was used. Starch hydrolysis was reduced up to 42% and 25% when quinoa and BW SD were used, respectively. SD application produced breads with higher technological quality and modified in vitro starch hydrolysis and antioxidant capacity. Even though these effects seemed to be influenced by pH, a biological effect was also observed.     

Mid infrared attenuated total reflection spectroscopy as a rapid tool to assess the quality of Sicilo-Sarde ewe’s milk during the lactation period after replacing soybean meal with scotch bean in the feed ration

This study investigates the potential of attenuated total reflection spectroscopy in the mid infrared (MIR) for monitoring changes in the quality of ewe’s milk as a function of lactation period and feeding systems. Twelve 5-year-old lactating Sicilo-Sarde ewes (third lambing) were kept in environmentally controlled sheepfolds and were divided into two homogenous weight matched groups (n = 6). Ewes were fed ad libitum with two iso-energetic diets (20% barley, 3% vitamin and mineral premix, and 77% soybean meal or scotch bean). Physico–chemical analyses and MIR (3000–900 cm⁻¹) were performed on milk samples after 1, 2, 3, 4, 5, 6, 7, 8, 9 and 10 weeks of lactation period. The inclusion of scotch bean in the diet resulted in a significant decrease (P ? 0.05) of fat content (7.85 g 100 g⁻¹ vs. 6.75 g 100 g⁻¹) and a significant increase (P ? 0.05) of lactose level (3.49 g 100 g⁻¹ vs. 3.61 g 100 g⁻¹). The principal component analysis (PCA) applied to the 1700–1500 cm⁻¹ spectral region showed only some discrimination between milk samples according to diet compositions. The best results were obtained in the 3000–2800 cm⁻¹ and 1500–900 cm⁻¹ spectral regions since a good discrimination between milk from ewes fed soybean meal from those fed scotch bean meal was observed. It can be concluded that these spectral regions could be considered as fingerprint, regions allowing a good identification of milk according to diet composition. However, the MIR failed to discriminate milk samples according to the lactation period for the two feeding systems.     

Rice varieties in relation to rice bread quality

BACKGROUND: It is difficult to predict rice bread quality only from the amylose content (AC) or dough characteristics of new lines produced by rice breeding programmes. This study investigated the AC relative to bread baking quality of rice varieties developed in Korea, and identified specific characteristics that contribute to rice bread quality. RESULTS: Manmibyeo, Jinsumi, Seolgaeng and Hanareumbyeo were classified as low AC, YR24088 Acp9, Suweon517, Chenmaai and Goamibyeo as intermediate AC and Milyang261 as high AC. Suweon517, Milyang261 and Manmibyeo had a high water absorption index (WAI), while Goamibyeo, YR24088 Acp9, Jinsumi, Seolgaeng, Hanareumbyeo and Chenmaai had a low WAI. The gelatinisation enthalpy of flour varied from 9.2 J g^?1 in Milyang261 to 14.8 J g^?1 in YR24088 Acp9 . After 7 days of storage the rate of flour retrogradation and crumb firmness were weakly correlated, with the exception of Jinsumi . Bread volumes of Jinsumi, Chenmaai, YR24088 Acp9 and Goamibyeo were comparable to that of wheat flour, but the rest were unsuited to bread making because of their low volume and hard crumb texture. CONCLUSION: Based on volume, texture and crumb firmness ratio, Chenmaai and Goamibyeo were the most appropriate varieties for making bread. An intermediate AC and low WAI were the primary indicators of rice bread flour quality. Copyright © 2011 Society of Chemical Industry     

Comparison of the cell wall composition for flesh and skin from five different plums

Cell walls were isolated from flesh and skin of five plum varieties corresponding to three species (Prunus domestica L., Prunus salicina Lindl. and Prunus insititia Lindl.) using the alcohol-insoluble solids (AIS) procedure. Yields varied from 83 to 114 g kg⁻¹ dry weight in the flesh and from 192 to 361 g kg⁻¹ dry weight in the skins. Their main sugars were uronic acid (224–322 mg g⁻¹ AIS), cellulosic glucose (139–170 mg g⁻¹ AIS), galactose and arabinose. Galactose and arabinose ratio were variable between the varieties. The degrees of methylation were high (62–84).     

Effect of wheat flour protein compositions on the quality of deep-fried gluten balls

Wheat flours milled from five different varieties of wheat and collected at an extraction rate of 60% were used as raw materials in this study. The proximate compositions, dough Farinographic and Extensographic properties, and the quality indices of deep-fried gluten balls prepared from these flours were measured. The proteins of these five different wheat flours were extracted and analyzed using the electrophoretic method, and the effect of protein composition on the quality of deep-fried gluten balls prepared from these flours was investigated. In this study, the proteins in each sample were divided into six groups, and the molecular weights of the proteins in these six groups are as follows: (I) 205.0–97.4 kDa; (II) 97.4–66.2 kDa; (III) 66.2–45.0 kDa; (IV) 45.0–36.0 kDa; (V) 24.0–19.7 kDa; (VI) 14.4–6.5 kDa, respectively. The results show that the protein contents of groups I, II, and V are negatively correlated to peak force and Hunter b value of deep-fried gluten balls, but positively correlated to Hunter L value and sensory evaluation score of appearance. The above results reveal that the high-molecular weight glutenin subunits, ω-gliadins, and albumins/globulins of wheat flour have a profound effect on the quality of deep-fried gluten balls.     

Use of a portable time-resolved fluorometer to determine oxytetracycline residue in four fruit crops

Oxytetracycline (OTC) is used worldwide to protect crops against bacterial diseases. The US Environmental Protection Agency approved its use in apple, pear, nectarine, and peach, and set residue tolerance at 350 ng g⁻¹. A europium-sensitised luminescence (ESL) method was developed for in-situ determination of OTC residue in these fruits. After extraction in Na₂EDTA-NaCl-McIlvaine buffer at pH 4 and filtration, cleanup was performed using hydrophilic-lipophilic balance cartridges. ESL was measured using a portable time-resolved fluorometer. The signal responded linearly over three orders of magnitude (10–10000 ng g⁻¹) with 17–50 ng g⁻¹ limits of quantitation and 2% averaged relative standard deviation. Recoveries were 84% and 82% at 100 and 350 ng g⁻¹, respectively. Inter-laboratory validation was performed by HPLC–MS/MS.     

Physicochemical and sensory properties of soy bread made with germinated,steamed, and roasted soy flour

For the development of healthful gluten-free soy bread acceptable to consumers, we evaluated the effects of various processing procedures for soy flour on bread quality, in terms of beany flavour and texture. We pretreated soy flour by both non-heating (raw:NS and germinated:GS) and heating (steamed:SS and roasted:RS) methods. In addition, to improve the loaf volume, we added 1% hydroxypropyl-methylcellulose (HPMC) to RS flour. Lipoxygenase activity was retained in the non-heat-treated flours (279 U/g for NS and 255 U/g for GS), but was significantly reduced in the heat-treated flours (106 U/g for SS and 69 U/g for RS). Moreover, heat-treated flour had higher isoflavone and ferric reducing antioxidant power than had non-heat-treated flour. However, RS flour had the lowest moisture content and lowest L^∗ value. The GS bread had the highest specific loaf volume (3.53 cm³/g), followed by NS (2.96 cm³/g), RS (2.25 cm³/g), and SS (1.81 cm³/g) bread. GS bread had the lowest hardness (1.53 N), followed by NS (1.65 N), RS (2.00 N), and SS (3.75 N) bread. The addition of 1% HPMC to RS increased the loaf volume (2.44 cm³/g), but decreased the bread’s hardness (1.80 N). As to the sensory properties, the bread with heat-treated flour was perceived to have a less beany odour and taste than was the bread with non-heat-treated flour. However, the latter had a better appearance than the former. These results indicated that soy flour pretreatment could enhance the loaf volume and reduce the beany flavour of whole soy bread.     

Physical, textural and sensory characteristics of 7-day frozen part-baked French bread

Bread partially baked for 7 min at 250 °C, after cooling, was frozen until core temperature reached −18 °C and stored at this same temperature up to 7 days. Samples were removed daily from the freezer, thawed and baked at 250 °C for 6 min. Analyses were performed 1 h after final baking, and were also conducted on fresh French bread daily produced (control). Weight and specific volume of frozen part-baked bread presented significant difference (P<0.05) compared with fresh one. Sensory analysis was carried out by a trained panel using the Difference from Control test to evaluate the difference and the degree of difference between frozen part-baked French bread (FPBFB) and fresh bread regarding appearance, tactile by direct touch and mouthfeel. All scores obtained indicated that the panelists, during the studied period, considered FPBFB to be slightly different compared with fresh one. Consumer Acceptance test was applied to compare appearance (gloss, roughness and cut on bread surface), oral texture (crust crispness and crumb firmness) and overall flavor between frozen part-baked bread and a commercial brand. All sensory scores obtained from Consumer test indicated that the 4-day frozen part-baked presented a superior acceptance to the commercial brand.     

Influence of frozen storage and packaging on oxidative stability and texture of bread produced by different processes

The influence of packaging barrier properties and frozen storage on phenolic and phytosterol content, oxidative stability and crumb texture of frozen dough, part-baked and fully baked frozen bread was investigated in comparison to conventionally produced bread. Samples were stored either in blue coloured high density polyethylene (PE-HD) or transparent polyester-polyethylene-ethylene-vinyl alcohol copolymer (PET-PE/EVAL/PE) pouches for 22 days at −18 °C. Packaging materials were different in oxygen permeability: 3.67 cm³m⁻²day⁻¹ bar⁻¹ for PET-PE/EVAL/PE and 2080 cm³m⁻²day⁻¹ bar⁻¹ for PE-HD material, which did not significantly change during storage. Total phenolic content and oxidative stability of bread samples decreased during storage depending on the process. Frozen dough bread had the lowest phenolics decrease and the highest oxidative stability. Total phenolic content and oxidative stability of frozen breads during 8 days were similar to conventional bread. The phenolics reduction was higher for samples stored in PET-PE/EVAL/PE laminate than in PE-HD packaging. Total sterol content did not significantly change during bread storage in investigated packaging and did not contribute to the oxidation. Bread firmness was affected only by the process and not by the storage time and packaging material.     

Dough characteristics of Irish wheat varieties II. Aeration profile and baking quality

The aeration profile of doughs made from Irish wheat varieties was examined during fermentation. The fermentation process was evaluated with a Chopin rheofermentometer and also by monitoring the dynamic dough density. Minimum dough density which indicates maximum dough expansion was correlated with maximum dough height reached in the rheofermentometer (r = −0.8). Baked loaves from the samples were evaluated for their overall quality. The poor baking potential of one variety (Trappe) as well as the low expansion capacity of another (Raffles) was discriminated from the results obtained from both tests. Loaf volume was correlated with the maximum dough height measured with the rheofermentometer and with the minimum dough density. The overall baking quality of the flours was evaluated by using 3D scatter plots which combined loaf volume with number of cells/mm² and intrinsic hardness. Using this technique, the varieties were divided into clusters depending on their baking quality. Principal Components Analysis was carried out incorporating all the measured dough and bread properties. The loading plot indicated that rheological parameters are those most likely to predict loaf volume whereas other crumb characteristics such as cell size and crumb hardness were difficult to relate to measured dough properties.     

Quality parameters and baking performance of commercial gluten flours

Commercial gluten which is labeled in different ways, i.e., gluten, gluten flour, glutinated flour, is sold without any specifications. Breadmaking potential of commercial gluten was assessed by adding them in different concentration levels (6 and 50 g/100 g) to wheat flour. This evaluation was done by physicochemical analyses and subjective characterization. Protein content of commercial glutens ranged from 15.2 g/100 g to 75.2 g/100 g. Diastatic activity of glutinated flours was around 30% lower than the values of wheat flour, while this activity in gluten flours was 24 - 79% lower than wheat flour values. Direct correlation was observed between protein content of blends and loaf volumes: breads volume value increased with the percentage of protein in blends (r_s=1). Furthermore as the percentage of protein in flour blends increased (up to 17.5 g/100 g) scores for smell, crumb color, crumb grain, crumb texture and eatability improved. Breads obtained by incorporating 6 g/100 g of gluten flour or 50 g/100 g of glutinated flour to a wheat flour had the best scores. Breads containing the highest protein content (50 g/100 g gluten flour) were refused by taste panelists, however, after being sliced and toasted they were rated acceptable.     

Migration of α-tocopherol and resveratrol from poly(L-lactic acid)/starch blends films into ethanol

Poly(L-lactic acid) (PLLA)/starch blends with various concentrations of two natural antioxidants, α-tocopherol (α-TOC) and resveratrol, were fabricated by a melt blending and compression molding processes. The effects of the two antioxidants on the optical (color), thermal and mechanical properties of PLLA/starch blends with antioxidants were assessed. PLLA/starch blend films with α-TOC and resveratrol showed a yellowish color influenced by the combined effect of white starch and the brown color of the antioxidants. The glass transition and melting temperatures were significantly reduced with the addition of antioxidants while enhanced thermal stability was observed, which could be a benefit and important for processing and production. The enhanced mechanical properties could be attributed to not only a compatibilization effect based on the chemical linkage between PLLA and starch chains, but also restriction of the chain mobility by antioxidants. The release of resveratrol from PLLA and PLLA/starch blend films into ethanol followed Fickian behavior. The D values of α-TOC were in the range of 0.47–3.95 × 10⁻¹¹ cm² s⁻¹ for PLLA films and 0.70–6.83 × 10⁻¹¹ cm² s⁻¹ for PLLA/starch blend films at 13 °C, 5.67–13.0 × 10⁻¹¹ cm² s⁻¹ for PLLA films and 4.10–24.2 × 10⁻¹¹ cm² s⁻¹ for PLLA/starch blend films at 23 °C, and 89.0–118.0 × 10⁻¹¹ cm² s⁻¹ for PLLA films and 123–282 × 10⁻¹¹ cm² s⁻¹ for PLLA/starch blend films at 43 °C. The D values of resveratrol were in the range of 0.073–0.54 × 10⁻¹⁰ cm² s⁻¹ for PLLA films and 1.42–6.93 × 10⁻¹⁰ cm² s⁻¹ for PLLA/starch blend films at 13 °C, 0.90–3.44 × 10⁻¹⁰ cm² s⁻¹ for PLLA films and 4.16–22.3 × 10⁻¹⁰ cm² s⁻¹ for PLLA/starch blend films at 23 °C, and 24.8–74.1 × 10⁻¹⁰ cm² s⁻¹ for PLLA films and 40.1–309 × 10⁻¹⁰ cm² s⁻¹ for PLLA/starch blend films at 43 °C.     

Improving the rheological and thermal properties of wheat dough by the addition of γ-polyglutamic acid

The rheological and thermal properties of wheat dough with the addition of γ-polyglutamic acid (PGA) (0.5, 1.0, 5.0 g kg⁻¹, w/w) was evaluated by the measurements of farinography, rapid visco analysis and differential scanning calorimetry. Adding 5.0 g kg⁻¹ PGA in wheat dough increased the mixing stability and raised the pasting temperature from 75.8 to 84.4 °C, but decreased the peak viscosity and breakdown. The water holding capacity of wheat dough increased with the addition of 5.0 g kg⁻¹ of PGA. At 5.0 g kg⁻¹ level, PGA caused significant declines in the enthalpy, onset and peak temperatures of ice-melting transition of wheat dough. Scanning electron microscopy showed that wheat bread with the addition of 1.0 and 5.0 g kg⁻¹ PGA exhibited microstructures with smoother surfaces. During storage, PGA retarded the staling process of wheat bread.