Imaging of metal ion dissolution and electrodeposition by anodic stripping voltammetry-scanning electrochemical microscopy

We have developed a new imaging method for scanning electrochemical microscopy (SECM) employing fast-scan anodic stripping voltammetry (ASV) to provide sensitive and selective imaging of multiple chemical species at interfaces immersed in solution. A rapid cyclic voltammetry scan (100 V/s) is used along with a short preconcentration time (300-750 ms) to allow images to be acquired in a normal SECM time frame. A Hg-Pt film electrode is developed having an equivalent Hg thickness of 40 nm that has good sensitivity at short preconcentration times and also retains thin-film behavior with high-speed voltammetric stripping. Fast-scan anodic stripping currents are shown to be linear for 1-100 microM of Pb (2+) and Cd (2+) solutions using a preconcentration time of 300 ms. SECM images showing the presence of Pb (2+) and Cd (2+) at concentrations as low as 1 microM are presented. In addition, a single ASV-SECM image is shown to produce unique concentration maps indicating Cd (2+) and Pb (2+), generated in situ from a corroding sample, while simultaneously detecting the depletion of O 2 at this sample. The transient voltammetric response at the film electrode is simulated and shows good agreement with the experimental behavior. We discuss the behavior of images and concentration profiles obtained with different imaging conditions and show that mass-transport limitations in the tip-substrate gap can induce dissolution. ASV-SECM can thus be used to detect and study induced dissolution not only at bulk metal surfaces but also on underpotential deposition layers, in this case Cd and Pb on Pt. In addition, we discuss how surface diffusion phenomena may relate to the observed ASV-SECM behavior.     

Anodic stripping voltammetry enhancement by redox magnetohydrodynamics

The effect of an external magnetic field on linear scan anodic stripping voltammetry (ASV) in solutions of 10(-6)-10(-7) M concentrations of lead, cadmium, and copper at mercury films on glassy carbon electrodes has been investigated. A high concentration of Hg(2+) was added to the analyte solution to induce a large cathodic current during the deposition step. Therefore, a large Lorentz force from the net flux of charge through the magnetic field resulted in convection due to magnetohydrodynamics. The faster delivery of analytes to the mercury film electrode during deposition caused an increase in the anodic stripping peaks. The effect of varying Hg(2+) concentrations (0-60 mM) and magnetic field strengths (0-1.77 T) on the enhancement of the stripping peaks was investigated. Enhancements as large as 129% for peak currents and 167% for peak areas were observed. An enhancement of approximately 100% was observed when 60 mM Fe(3+) replaced high concentrations of Hg(2+). This method of convection exhibits promise for small-volume ASV analysis with possible improved limits of detection and decreased preconcentration times.     

Ferrocenylethyl phosphate: an improved substrate for the detection of alkaline phosphatase by cathodic stripping ion-exchange voltammetry. Application to the electrochemical enzyme affinity assay of avidin

The ferrocenylethyl phosphate disodium salt was synthesized and used as a new substrate for alkaline phosphatase (AP). The enzyme-generated ferroceneethanol was selectively and sensitively detected at a Nafion film-coated electrode by anodic preconcentration of the ferricinium salt, followed by cyclic voltammetry. The accumulated ferricinium units could be expelled from the polymer film in their neutral form by cathodic stripping, and so the Nafion-modified electrode could be reused for more than 10 measurements with a standard deviation less than 3%. Values of 0.75 mM for the Michaelis constant and 1.42 μmol s(-)(1) (mg of protein)(-)(1) for the maximal velocity were found. The regenerable Nafion-coated electrode was employed for the indirect detection of AP down to 2 × 10(-)(12) M and for the noncompetitive heterogeneous enzyme assay of avidin, whose detection limit was 5 × 10(-)(12) M.     

A novel photoelectrochemical sensor for the organophosphorus pesticide dichlofenthion based on nanometer-sized titania coupled with a screen-printed electrode

A novel photoelectrochemical sensor for detection of the organophosphorus pesticide (OP) dichlofenthion using nanometer-sized titania coupled with a screen-printed electrode is presented. Nonelectroactive dichlofenthion can be indirectly determined through the photocatalytical degradation of dichlofenthion with nanometer-sized titania. The electrochemical characterization and anodic stripping voltammetric performance of dichlofenthion were evaluated using cyclic voltammetric (CV) and differential pulse anode stripping voltammetric (DPASV) analysis, respectively. DPASV analysis was used to monitor the amount of dichlofenthion and provide a simple, fast, and facile quantitative method for dichlofenthion. Operational parameters, including the photocatalysis time, pH of buffer solution, deposition potential, and accumulation time have been optimized. The stripping voltammetric response is linear over the 0.02-0.1 and 0.2-1.0 μmol/L ranges with a detection limit of 2.0 nmol/L. The assay result of dichlofenthion in green vegetable with the proposed method was in acceptable agreement with that of the gas chromatograph-mass spectrometer (GC-MS) method. The promising sensor opens a new opportunity for fast, portable, and sensitive analysis of OPs in environmental samples.     

Electrochemical behavior and determination of the insecticide synergist piperonyl butoxide

Piperonyl butoxide may be reversibly oxidized in acetonitrile at a glassy carbon electrode to a cation radical under short time scale voltammetric conditions, e.g., cyclic voltammetry when the potential scan rate is above 500 mV s(-)(1). During longer time domain experiments, the cation radical decays in a rate-limiting heterolytic bond cleavage step and subsequent transfer of a second electron at the potential of the first process. Additionally, a second oxidation process develops at more positive potentials. One product isolated from the initial oxidation process in an almost quantitative yield, under controlled potential electrolysis conditions, is 6-n-propyl-1,3-benzodioxole-5-carboxaldehyde. This carboxaldehyde is oxidized at the same positive applied potential as the second oxidation process observed in long time domain voltammetric experiments with piperonyl butoxide. The limit of detection for piperonyl butoxide in acetonitrile, using differential pulse voltammetry at a glassy carbon electrode, is 1.6 × 10(-)(6) M (3σ), with a limit of determination of 4.1 × 10(-)(6) M (10σ). Piperonyl butoxide was selectively determined using differential pulse voltammetry with a concentration of 5.11 ± 0.02 g L(-)(1) in a commercial insecticide formulation containing pyrethrins. This result is in good agreement with the manufacturer's stated concentration of 5.07 g L(-)(1). The sample preparation requires only simple dilution of the formulation in an acetonitrile/dichloromethane (95:5) solvent mixture.     

Electrochemical sensor for organophosphate pesticides and nerve agents using zirconia nanoparticles as selective sorbents

An electrochemical sensor for detection of organophosphate (OP) pesticides and nerve agents using zirconia (ZrO2) nanoparticles as selective sorbents is presented. Zirconia nanoparticles were electrodynamically deposited onto the polycrystalline gold electrode by cyclic voltammetry. Because of the strong affinity of zirconia for the phosphoric group, nitroaromatic OPs strongly bind to the ZrO2 nanoparticle surface. The electrochemical characterization and anodic stripping voltammetric performance of bound OPs were evaluated using cyclic voltammetric and square-wave voltammetric (SWV) analysis. SWV was used to monitor the amount of bound OPs and provide simple, fast, and facile quantitative methods for nitroaromatic OP compounds. The sensor surface can be regenerated by successively running SWV scanning. Operational parameters, including the amount of nanoparticles, adsorption time, and pH of the reaction medium have been optimized. The stripping voltammetric response is highly linear over the 5-100 ng/mL (ppb) methyl parathion range examined (2-min adsorption), with a detection limit of 3 ng/mL and good precision (RSD = 5.3%, n = 10). The detection limit was improved to 1 ng/mL by using 10-min adsorption time. The promising stripping voltammetric performances open new opportunities for fast, simple, and sensitive analysis of OPs in environmental and biological samples. These findings can lead to a widespread use of electrochemical sensors to detect OP contaminates.     

Electrochemiluminescent detection of chlorpromazine by selective preconcentration at a lauric acid-modified carbon paste electrode using tris(2,2'-bipyridine)ruthenium(II)

A new detection scheme for the determination of adsorbable coreactants of Ru(bpy)3(2+) electrochemiluminescent reaction is presented. It is based on selective preconcentration of coreactant onto an electrode, followed by Ru(bpy)3(2+) electrochemiluminescent detection. The coreactant employed is chlorpromazine. It was sensitively detected after 5-min preconcentration onto a lauric acid-modified carbon paste electrode. The linear concentration range was found to occur from 1 x 10(-8) to 3 x 10(-6) mol L-1 with a detection limit of 3.1 x 10(-9) mol L-1. The total analysis time is less than 10 min. As a result of selective preconcentration and medium exchange, such remarkable selectivity is achieved that reproducible quantitation of chlorpromazine in urine is possible.     

铋膜电极阳极溶出伏安法检测痕量Cd金属

镉氧化产生的溶出电流与样品中Cd²⁺的浓度有关。本研究通过方波阳极溶出伏安法(SWASV)在活化铋膜电极(Activated BFE)上对低浓度μg/L水平的Cd(II)进行测定。通过电化学方法对电极进行初步改性, 然后电沉积制备铋膜再次对电极进行改进, 从而增强了对痕量目标Cd²⁺的敏感性。对改性前后的玻碳电极(GCE)表面进行SEM、CV、EIS和SWV的表征。为了将这种伏安法传感器应用于含有低浓度Cd²⁺的实际样品中, 对检测Cd²⁺的实验参数进行了研究。使用选定的条件, 在10 min的预富集条件下Cd²⁺的检测限为1 μg/L。     

Electrochemical determination of dopamine based on self-assembled peptide nanostructure

Self-assembled peptide nanostructures are electronically insulating as are most biomaterials derived from natural amino acids. To obtain additional properties and increase the applicability of peptide nanomaterials, some chemical modifications can be performed and materials can be functionalized to form hybrid compounds. In this work, we described the formation of L-diphenylalanine nanotubes (PNTs) with cyclic-tetrameric copper(II) species containing the ligand (4-imidazolyl)ethylene-2-amino-1-ethylpyridine [Cu(4)(apyhist)(4)](4+) in the Nafion membrane on a vitreous carbon electrode surface. This copper complex has been studied as structural and functional models for the active centers of copper containing redox enzymes. Scanning electron microscopy was used to confirm the formation of the nanostructures. The electrochemical properties of the PNT-[Cu(4)(apyhist)(4)](4+)/Nafion film on a glassy carbon electrode were characterized using cyclic voltammetry and square-wave voltammetry and showed high electrocatalytic activity toward the oxidation of dopamine (DA). The detection sensitivity was found to be enhanced by the use of copper(II) complex in the PNTs/Nafion films. Under the optimum conditions, the square-wave voltammetry peak height was linearly related to the DA concentration over two concentration intervals, viz., 5.0-40 μmol L(-1) and 40-1000 μmol L(-1). The detection limit was 2.80 μmol L(-1) (S/N = 3), and ascorbic acid did not interfere with the DA detection. These results suggested that this hybrid bioinorganic system provides an attractive advantage for a new type of electrochemical sensors. The detection sensitivity was found to be enhanced by use of PNTs.     

前列腺特异性抗体电化学免疫传感器的研制

利用自组装的方法在金电极上制得巯基丁二胺铜(Ⅱ)/纳米金胶/前列腺特异性抗体(抗PSA)免疫修饰电极。用该修饰电极对PSA进行检测,发现其循环伏安图的氧化还原峰电流都随PSA浓度的增高而降低,峰电位没有变化。其最佳实验条件包括:pH5.2的0.1mol/L磷酸盐缓冲液作为底液,以及用示差脉冲方式进行定量测定。结果显示:该传感器的氧化峰电流减少值与PSA浓度在0.005-0.48μg/mL范围内成线性关系,检测下限为2ng/mL.在40 ng/mLPSA浓度下八次测量相对标准偏差为2.9%,该免疫传感器的稳定性和抗干扰性都较好。对血清中的PSA进行检测,获得满意的结果。     

Determination of Cu2+ using poly(2-aminothiazole)/ multi-walled carbon nanotubes composite film modified glassy carbon electrodes

2-Aminothiazole was electropolymerized by cyclic voltammetry (CV) on the multi-walled carbon nanotubes (MWCNTs) modified glassy carbon electrode (GCE) surface. Poly(2-aminothiazole)/MWCNTs/GCE was used for determination of copper ions. The anodic peak currents of copper ions evaluated by differential pulse stripping voltammetry (DPSV) are linear with the concentrations in the range from 1.0 x 10(-7) M to 2.0 x 10(-5) M with a linear coefficiency of 0.9985. The detection limit is 2.0 x 10(-9) M calculated for a signal-to-noise ratio of 3 (S/N = 3). The proposed method was applied successfully to the determination of copper ions in drinking water, and the recovery was 96%.     

Factors influencing redox magnetohydrodynamic-induced convection for enhancement of stripping analysis

Factors affecting the use of redox magnetohydrodynamics (MHD) to enhance the stripping analysis response to heavy metals have been investigated. The analytes were Pb2+, Cd2+, Cu2+, and Tl+ at concentrations ranging from 5 nM to 2 microM. Co-deposition of analytes with Hg2+ (to form a thin Hg film electrode) occurs along with reduction of a high concentration of Fe3+. The Fe3+ provides the high cathodic current necessary to produce a significant Lorentz force, and therefore enhanced convection and larger stripping signals and sensitivities, when the analysis is performed in the presence of an external magnetic field. The effects of varying Fe3+ concentration (1-100 mM), working electrode size (10 microm-3 mm), and magnetic field strengths (0-1.77 T) generated with electromagnets and NdFeB permanent magnets were investigated. Using 100 mM Fe3+ as the MHD-generating redox species at a 3-mm working electrode and in a magnetic field of 1.77 T, peak areas from linear sweep voltammetry were increased by as much as 159 +/- 5%, compared to the signal obtained in the absence of a magnetic field. Experimental detection limits as low as 5 nM were achieved with only a 1-min preconcentration time. A field strength as low as 0.12 T offers some signal enhancement with 100 mM Fe3+. While linear scan anodic stripping voltammetry was used primarily to obtain the signals after the deposition step, potentiometric stripping analysis was also investigated. Redox MHD is an attractive alternative convection method for applications involving sample volumes too small for mechanical stirring or for in-field applications using portable devices that cannot be complicated by the instrumentation required for mechanical stirring.     

Ultramicroband array electrode. 1. Analysis of mercury in contaminated soils and flue gas exposed samples using a gold-plated iridium portable system by anodic stripping voltammetry

The applicability of a gold-plated iridium Nano-Band array ultramicroelectrode (6 microm by 0.2 microm, 64-microm interspacing, 100 electrode bands) in the analysis of mercury using a portable system is demonstrated by anodic stripping voltammetry in real-life samples. Optimized measurement parameters, 0.1 M HCl electrolyte, plating potential of 0 mV, and staircase scan mode were identified. The dynamic linear range is 10-180 ppb at 5-s deposition time with 1.5 microC of gold plated. The experimental detection limit for Hg2+ in 0.1 M HCl was 0.5 ppb at a deposition time of 4 min and a scan rate of 10 V/s. Real-life samples, such as flue gas exposed samples from flue gas simulators could be analyzed within 5 min using the method of standard additions. We identified a field-portable extraction procedure for soil samples using 1:1 concentrated HNO3/30% H2O2 mixture, compatible with ASV and the iridium electrode. The detection limit for soils is 1 ppm. The results obtained using ASV are in good agreement with reference values using cold vapor atomic absorption for the sample matrixes studied here. To our knowledge, this is the first mercury application using a reusable iridium array ultramicroelectrode. The portable potentiostat is less than 500 g, and together with the portable digestion method, makes the Nano-Band Explorer system field applicable.     

Cathodic preconcentration of f-elements on a mercury film carbon fiber disk microelectrode

Field detection and quantification of f-elements is an important problem in radioanalytical chemistry requiring small, portable devices. Here, characterization of a 10 μm Hg film carbon fiber disk microelectrode to accumulate f-elements is described. Accumulation was performed by cathodic deposition and evaluated by anodic stripping and subsequent ICPMS analyses. La(3+) was used as the model element, and subsequent studies were conducted on a 17 element mixture (Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Th). In the model studies, La(3+) undergoes a sorption phenomenon, and as in other studies and confirmed by ICPMS, a monolayer of atoms on the electrode surface is formed. Dissolved O(2) was found to have no effect on the cathodic accumulation of La(3+). Consideration of electrode reaction conditions is made, and reactions are hypothesized. The limit of detection (LOD) was found to be 10(-7) M with mass detection of 10(9) atoms, approximately 5 orders of magnitude less than at conventionally sized electrodes. To solve a dilution problem in follow-on analyses, a suggestion to use microelectrode chip-based sensors was made.     

Adsorptive stripping voltammetry of hen-egg-white-lysozyme via adsorption-desorption at an array of liquid-liquid microinterfaces

Electrochemical adsorption and voltammetry of hen-egg-white-lysozyme (HEWL) was studied at an array of microinterfaces between two immiscible electrolyte solutions (μITIES). Adsorption of the protein was achieved at an optimal applied potential of 0.95 V, after which it was desorbed by a voltammetric scan to lower potentials. The voltammetric peak recorded during the desorption scan was dependent on the adsorption time and on the aqueous phase concentration of HEWL. The slow approach to saturation or equilibrium indicated that protein reorganization at the interface was the rate-determining step and not diffusion to the interface. For higher concentrations and longer adsorption times, a HEWL multilayer surface coverage of 550 pmol cm(-2) was formed, on the basis of the assumption that a single monolayer corresponded to a surface coverage of 13 pmol cm(-2). Implementation of adsorption followed by voltammetric detection as an adsorptive stripping voltammetric approach to HEWL detection demonstrated a linear dynamic range of 0.05-1 μM and a limit of detection of 0.03 μM, for 5 min preconcentration in unstirred solution; this is a more than 10-fold improvement over previous HEWL detection methods at the ITIES. These results provide the basis for a new analytical approach for label-free protein detection based on adsorptive stripping voltammetry.     

Development of a method for total inorganic arsenic analysis using anodic stripping voltammetry and a Au-coated, diamond thin-film electrode

We demonstrate that a Au-coated, boron-doped, diamond thin-film electrode provides a sensitive, reproducible, and stable response for total inorganic arsenic (As(III) and As(V)) using differential pulse anodic stripping voltammetry (DPASV). As is preconcentrated with Au on the diamond surface during the deposition step and detected oxidatively during the stripping step. Au deposition was uniform over the electrode surface with a nominal particle size of 23 +/- 5 nm and a particle density of 109 cm-2. The electrode and method were used to measure the As(III) concentration in standard and river water samples. The detection figures of merit were compared with those obtained using conventional Au-coated glassy carbon and Au foil electrodes. The method was also used to determine the As(V) concentration in standard solutions after first being chemically reduced to As(III) with Na2SO3, followed by the normal DPASV determination of As(III). Sharp and symmetric stripping peaks were generally observed for the Au-coated diamond electrode. LODs were 0.005 ppb (S/N = 3) for As(III) and 0.08 ppb (S/N = 3) for As(V) in standard solutions. An As(III) concentration of 0.6 ppb was found in local river water. The relative standard deviation of the As stripping peak current for river water was 1.5% for 10 consecutive measurements and was less than 9.1% over a 10-h period. Excellent electrode response stability was observed even in the presence of up to 5 ppm of added humic acid. In summary, the Au-coated diamond electrode exhibited better performance for total inorganic As analysis than did Au-coated glassy carbon or Au foil electrodes. Clearly, the substrate on which the Au is supported influences the detection figures of merit.     

Rapid diagnostic barcode system for codetection of multiple protein markers

An ultrasensitive immunodiagnostic readout method based on an electrochemical analysis is presented. Different inorganic quantum dot (QD) nanocrystals (ZnS, CdS, and PbS) are tagged to antibodies for the on-site voltammetric stripping measurements of multiple antigen targets. The multiprotein electrical sensing capability is coupled to the amplification feature of anodic stripping voltammetric transduction and with an efficient magnetic removal (to minimize nonspecific adsorption and cross-reactivity effects). Sandwich-immunoassay formats were performed using model proteins (/spl beta//sub 2/-microglobulin, myoglobin, and human serum albumin). These encoding QD tracers with distinct redox potential yield highly sensitive and selective stripping peaks at -1.11 V (Zn), -0.67 V (Cd), and -0.52 V (Pb) at the mercury-film screen printed carbon electrode (versus Ag/AgCl reference). The position and size of these peaks reflect the identity and risk level of the corresponding antigen marker. The favorable signal-to-noise characteristics of the response for the initial 25-ng/mL mixture indicate a detection limit of ca. 10 ng/mL far below the early warning range and allow a reliable determination of very low protein concentrations. Such analog peaks of the QDs were converted to simple and rapid barcode signals. The digital readout system can code 215 electrically tuned barcodes to mark different protein analytes and to be useful for a wireless communication system.     

Voltammetric reduction and determination of hydrogen peroxide at an electrode modified with a film containing palladium and iridium

Cyclic voltammetry of a mixture containing 0.2 mM Na2IrCl6, 0.1 mM PdCl2, 0.2 M K2SO4, and 0.1 M HCl between 1.2 and -0.3 V vs Ag/AgCl for five cycles at 50 mV s-1 yields a stable film on a glassy carbon electrode. The reduction of hydrogen peroxide in 0.1 M KCl is diffusion controlled at that modified electrode. Calibration curves obtained at a 100 mV s-1 scan rate are linear in the range 0.2-1.8 mM H2O2. The slope, 28 microA L mmol-1, is independent of film thickness. Since dissolved oxygen is reduced at about the same potential as H2O2, -0.3 V, at the modified electrode, it will act as an interferent in solutions that are not deaerated; however, the currents are additive. A second limitation of the described procedure is that with the KCl electrolyte the immobilized film must be reoxidized prior to each measurement. Preliminary data are described which suggest that this problem is alleviated by switching to a basic supporting electrolyte.     

Voltammetric determination of the synthetic pyrethroid insecticide tetramethrin in acetonitrile

The synthetic pyrethroid insecticide tetramethrin may be reduced reversibly (E°' = -1.650 V vs Ag/Ag(+)) in acetonitrile at hanging mercury drop electrodes (HMDE) and glassy carbon electrodes. On the voltammetric time scale, the initial electron-transfer process involves the reversible formation of a radical anion. Data obtained from electron paramagnetic resonance spectroscopy indicate that the unpaired electron of the radical is located within the phthalimide system of the molecule. The radical anion may be further reduced at very negative applied potentials with the number of processes being dependent on the nature of the voltammetric technique. The detection limit (3σ) for the determination of tetramethrin in acetonitrile at a glassy carbon electrode, using differential pulse voltammetry, was found to be 2.1 × 10(-6) M. At a HMDE the detection limit is lower, having a value of 9.6 × 10(-7) M. The limit of determination (10σ) at a glassy carbon electrode is 3.5 × 10(-6) M and at a HMDE is 3.0 × 10(-6) M. Tetramethrin was selectively determined in an insecticide formulation, at a glassy carbon electrode using differential pulse voltammetry, at a concentration (w/v) of 0.34 ± 0.02%. The determined concentration is in good agreement with the stated value of 0.350 ± 0.018% (w/v).     

Cyclic voltammetric detection in capillary electrophoresis with application to metal ions

Fast cyclic voltammetry (CV) was evaluated over sweep rates of 20-1000 V/s at Au disk electrodes (25 and 10 μm) for end-capillary detection in capillary electrophoresis with metal ions as test analytes; some studies were also done with 25-μm Pt disk electrodes. The waveform applied to the electrode consisted of a preconcentration period (55-330 ms) followed by cyclic voltammetry (2-100 ms). Maximum signal-to-noise was obtained with the integrated CV current as the analytical signal, and this was linearly proportional to sweep rate; maximum response was obtained at sweep rates of >100 V/s for 10-μm electrodes and >200 V/s for 25-μm electrodes; sweep rates of >400 V/s caused peak tailing due to trapping of the analyte at the electrode. With this CV detection approach, comigrating analytes could be identified and determined. Reproducibilities for six analytes over the range 1.0 × 10(-)(7)-1.0 × 10(-)(5) mol/L were 2%-5%, and calibration curves were linear, with response factors in the range of 2%-6%. Detection limits (2 × peak-to-peak baseline noise) were in the range of 5 × 10(-)(9)-4 × 10(-)(8) mol/L, which are 1-2 orders of magnitude better than results obtained previously with square-wave pulsed amperometric detection of metal ions.