Marked reduction in the thermal conductivity of (La0.2Gd0.2Y0.2Yb0.2Er0.2)2Zr2O7 high-entropy ceramics by substituting Zr4+ with Ti4+

The (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂(Zr_1-xTi_x)₂O₇ (x = 0–0.5) high-entropy ceramics were successfully prepared by a solid state reaction method and their structures and thermo-physical properties were investigated. It was found that the high-entropy ceramics demonstrate pure pyrochlore phase with the composition of x = 0.1–0.5, while (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂Zr₂O₇ shows the defective fluorite structure. The sintered high-entropy ceramics are dense and the grain boundaries are clean. The grain size of high-entropy ceramics increases with the Ti⁴⁺ content. The average thermal expansion coefficients of the (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂(Zr_1-xTi_x)₂O₇ high-entropy ceramics range from 10.65 × 10^?6 K^?1 to 10.84 × 10^?6 K^?1. Importantly, the substitution of Zr⁴⁺ with Ti⁴⁺ resulted in a remarkable decrease in thermal conductivity of (La_0.2Gd_0.2Y_0.2Yb_0.2Er_0.2)₂(Zr_1-xTi_x)₂O₇ high-entropy ceramics. It reduced from 1.66 W m^?1 K^?1 to 1.20 W m^?1 K^?1, which should be ascribed to the synergistic effects of mass disorder, size disorder, mixed configuration entropy value and rattlers.     

Solid-state reactive sintering of La2-xGdxZr2O7 transparent ceramics and their optical properties

Transparent polycrystalline La_2-xGd_xZr₂O₇ (x = 0.4–2.0) ceramics were fabricated by solid-state reactive sintering using commercially available La₂O₃, Gd₂O₃ and ZrO₂ nanopowders as the raw materials. The phase composition, microstructure evolution, densification and optical transmittance of the resulting ceramics were investigated. XRD and Raman results reveal that both the powders and ceramics are in single-phase pyrochlore structure. With the promotion of Gd content, the disorder degree of pyrochlore structure increases gradually while the cell parameters decrease. The x = 1.0, 1.2 and 1.6 samples exhibit high optical transmittance in the 450 nm-6.0 μm range, and the La_0.4Gd_1.6Zr₂O₇ sample shows the highest transmittance of 83.84%. The transparent La_2-xGd_xZr₂O₇ ceramics with high optical quality are available as scintillator matrice and high temperature window material.     

Effects of Yb3+ doping on phase structure,thermal conductivity and fracture toughness of (Nd1-xYbx)2Zr2O7

To investigate the effects of Yb³⁺ doping on phase structure, thermal conductivity and fracture toughness of bulk Nd₂Zr₂O₇, a series of (Nd_1-xYb_x)₂Zr₂O₇ (x?=?0, 0.2, 0.4, 0.6, 0.8, 1.0) ceramics were synthesized using a solid-state reaction sintering method at 1600?°C for 10?h. The phase structures were sensitive to the Yb³⁺ content. With increasing doping concentration, a pyrochlore-fluorite transformation of (Nd_1-xYb_x)₂Zr₂O₇ ceramics occurred. Meanwhile, the ordering degree of crystal structure decreased. The substitution mechanism of Yb³⁺ doping was confirmed by analyzing the lattice parameter variation and chemical bond of bulk ceramics. The thermal conductivities of (Nd_1-xYb_x)₂Zr₂O₇ ceramics decreased first and then increased with the increase of Yb³⁺ content. The lowest thermal conductivity of approximately 1.2?W?m^?1 K^?1 at 800?°C was attained at x?=?0.4, around 20% lower than that of pure Nd₂Zr₂O₇. Besides, the fracture toughness reached a maximum value of ~1.59?MPa?m^1/2 at x?=?0.8 but decreased with further increasing Yb³⁺ doping concentration. The mechanism for the change of fracture toughness was discussed to result from the lattice distortion and structure disorder caused by Yb³⁺ doping.     

Phase structure and thermophysical properties of co-doped La2Zr2O7 ceramics for thermal barrier coatings

La₂Zr₂O₇ has high melting point, low thermal conductivity and relatively high thermal expansion which make it suitable for application as high-temperature thermal barrier coatings. Ceramics including La₂Zr₂O₇, (La_0.7Yb_0.3)₂(Zr_0.7Ce_0.3)₂O₇ and (La_0.2Yb_0.8)₂(Zr_0.7Ce_0.3)₂O₇ were synthesized by solid state reaction. The effects of co-doping on the phase structure and thermophysical properties of La₂Zr₂O₇ were investigated. The phase structures of these ceramics were identified by X-ray diffraction, showing that the La₂Zr₂O₇ ceramic has a pyrochlore structure while the co-doped ceramics (La_0.7Yb_0.3)₂(Zr_0.7Ce_0.3)₂O₇ and the (La_0.2Yb_0.8)₂(Zr_0.7Ce_0.3)₂O₇ exhibit a defect fluorite structure, which is mainly determined by ionic radius ratio r(A_av.³⁺)/r(B_av.⁴⁺). The measurements for thermal expansion coefficient and thermal conductivity of these ceramics from ambient temperature to 1200 °C show that the co-doped ceramics (La_0.7Yb_0.3)₂(Zr_0.7Ce_0.3)₂O₇ and (La_0.2Yb_0.8)₂(Zr_0.7Ce_0.3)₂O₇ have a larger thermal expansion coefficient and a lower thermal conductivity than La₂Zr₂O₇, and the (La_0.2Yb_0.8)₂(Zr_0.7Ce_0.3)₂O₇ shows the more excellent thermophysical properties than (La_0.7Yb_0.3)₂(Zr_0.7Ce_0.3)₂O₇ due to the increase of Yb₂O₃ content.     

The effect of second phase La0.67TiO2.87 on the phase structure and impedance spectroscopy of La2Ti2(1 + x)O7 piezoelectric ceramics

The Ti excess La₂Ti_{2 (1+x)} O₇ (x = 0, 0.005, 0.01, 0.02, 0.05, 0.1) piezoelectric ceramics have been prepared by sol-gel technology and solid state synthesis method. Through refinement analysis, the phase structure of the ceramics varies with Ti content. Most monoclinic phase (∼93%) and a handful of orthogonal phase (∼7%) coexist in La₂Ti_{2 (1+0)} O₇ ceramics. Pure monoclinic phase La₂Ti₂O₇ with space group P2₁ appears in La₂Ti_{2 (1+0.005)} O₇ and La₂Ti_{2 (1+0.01)} O₇ ceramics. Monoclinic phase La₂Ti₂ O₇ and a certain proportion of tetragonal phase La_0.67TiO_2.87 coexist in La₂Ti_{2 (1+0.02)} O₇, La₂Ti_{2 (1+0.05)} O₇ and Ti_{2 (1+0.1)} O₇ ceramics. With the excess of Ti content, the monoclinic phase ratio and distortion angles in a-b projection plane of the ceramics increase first and then decrease, which is consistent with the variation tendency of piezoelectric constant d₃₃. The excellent piezoelectric constant for Ti_{2 (1+0.01)} O₇ ceramics is 2.8 pC/N.Impedance analysis shows that the conductive mechanisms of all samples include both grain and grain boundary conductivity at temperature range T ≥ 500 °C. The formation of tetragonal phase La_0.67TiO_2.87 derives from Ti excess in pure monoclinic phase La₂Ti₂O₇. The existence of tetragonal phase La_0.67TiO_2.87 can obviously increase the capacitance of ceramics at x ≥ 0.05. All prepared piezoelectric La₂Ti_{2 (1+x)} O₇ ceramics have highly frequency stability and are candidates for ultrahigh temperature piezoelectric application.     

High-entropy transparent (Y0.2La0.2Gd0.2Yb0.2Dy0.2)2Zr2O7 ceramics as novel phosphor materials with multi-wavelength excitation and emission properties

High-entropy ceramics have been extensively studied because of their novel intrinsic properties and have significant potential for application in various fields. In this study, a novel high-entropy transparent ceramic phosphor (Y_0.2La_0.2Gd_0.2Yb_0.2Dy_0.2)₂Zr₂O₇ was successfully prepared via a solid-state reaction and vacuum sintering. X-ray diffraction and scanning electron microscopy analyses were performed to analyze the phases and microstructures of the as-prepared powders and sintered ceramics. The highest in-line transmittance of the developed ceramic was 74 % in both visible and infrared regions. To reveal its luminescent properties as a potential WLED material, the photoluminescence of ceramic samples was analyzed using multi-excitation and emission spectra. Strong emissions originating from Dy³⁺ and Gd³⁺ were observed, and the emission color was effectively regulated under multi-wavelength excitation. Combining excellent optical transmittance with unique photoluminescence performance, the (Y_0.2La_0.2Gd_0.2Yb_0.2Dy_0.2)₂Zr₂O₇ high-entropy transparent ceramics can find potential applications as a novel WLED material with multi-wavelength excitation and tunable emission.     

Fabrication and phase transition of uranium-doped LaxGd2−xZr2O7 transparent ceramics: A prospective neutron detection material

Via vacuum sintering, 2 mol% uranium-doped La_xGd_2−xZr₂O₇ (x = 2, 1.6, 1, and 0.4) transparent ceramics with Ca²⁺ as charge compensator was first fabricated by solid-state reaction. X-ray diffraction results of as-prepared powders and ceramic samples demonstrate that the phase transition from defective fluorite to pyrochlore occurs with the increase of x. Optical in-line transmittance spectrum shows that four ceramic samples have good in-line transmittance (nearly 80% from 700 to 2200 nm), especially the U:La_1.6Gd_0.4Zr₂O₇ ceramics. The cut-off wavelength of four U-doped transparent ceramics shifted from 250 to near 460 nm, and it is believed that such phenomenon is related to the stable existence form of uranium in ceramics lattices. Observing the excitation emission spectra, the main excitation peaks of four ceramic samples are located at 458 nm, and the main emission peaks are located around 513 nm. In addition, there are low-intensity emission peaks around 520, 537, and 566 nm, and the related explanation is given in combination with the U⁶⁺ ion energy level diagram. Thus, uranium-doped La_xGd_2−xZr₂O₇ transparent ceramics have potential for novel neutron detection materials.     

Influence of Yb Substitution for La on Thermophysical Property of La2AlTaO7 Ceramics

The (La_1−xYb_x)₂AlTaO₇ ceramics were synthesized by pressureless sintering process at 1600 °C for 10 h in air. The crystal phase, microstructure and thermophysical properties were investigated. Results show that pure (La_1−xYb_x)₂AlTaO₇ cermics with single weberite structure are prepared successfully. Owing to the reduction of crystal-lattice tolerance-factor, the thermal conductivity of (La_1−xYb_x)₂AlTaO₇ (x>0) ceramics increases with increasing Yb₂O₃ fraction at identical temperatures, which is lower than that of La₂AlTaO₇. Due to the relatively high electro-negativity of Yb element, the addition of Yb₂O₃ increases the thermal expansion coefficient of (La_1−xYb_x)₂AlTaO₇ ceramics.     

Fabrication of Yb-doped Lu2O3-Y2O3-La2O3 solid solutions transparent ceramics by self-propagating high-temperature synthesis and vacuum sintering

A comparative analysis of sintering and grain growth processes of lutetium oxide and lutetium-yttrium-lanthanum oxides solid solutions, as well as optical properties, luminescence and laser generation of (Lu_xY_0.9-xLa_0.05Yb_0.05)₂O₃ transparent ceramics are reported. Fabrication of highly dispersed initial powders of these compounds was performed via nitrate-glycine self-propagating high-temperature synthesis (SHS) method. The powders were compacted at 300?MPa and vacuum sintered at temperatures up to 1750?°С. Optical ceramics of (Lu_0.65Y_0.25La_0.05Yb_0.05)₂O₃ elemental composition were shown to have the highest in-line transmittance, which achieved 78% at the wavelength of 800?nm. Generation of laser radiation at a wavelength of 1032?nm with the differential efficiency of 20% was demonstrated in the (Lu_0.65Y_0.25La_0.05Yb_0.05)₂O₃ ceramics.     

Phase composition,microstructure and thermophysical properties of the Srx(Zr0.9Y0.05Yb0.05)O1.95+x ceramics

Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=1.0, 0.9, 0.8, 0.7) ceramics were prepared by solid state reaction sintering. The sintered Sr_1.0(Zr_0.9Y_0.05Yb_0.05)O_2.95 is a single-phase solid solution while the sintered Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=0.9?0.7) are composites, and a significant grain growth inhibition is observed in the sintered Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=1.0, 0.9). Rare-earth elements distribution in the bulk materials indicates that Yb and Y preferentially substitute Zr-sites in SrZrO₃, and the highest solubility of RE₂O₃ in pure SrZrO₃ is ～0.8 mol%. The sintered Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x have high thermal expansion coefficients up to ～11.0×10^?6 K^-1 (1200°C). Sr_0.8(Zr_0.9Y_0.05Yb_0.05)O_2.75 has the lowest thermal conductivity of 1.38 W·m^-1·K^-1 at 800°C. Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=1.0, 0.9, 0.8) show no phase transition from 600 to 1400°C, whereas Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=0.9, 0.8) have excellent high-temperature phase stability over the whole investigated temperature range. Therefore, Sr_x(Zr_0.9Y_0.05Yb_0.05)O_1.95+x (x=1.0, 0.9, 0.8) are considered as promising TBCs materials that might be operated at higher temperatures compared to YSZ.     

Effect of Gd Content on Luminescence Properties of Eu3+‐Doped La2−xGdxZr2O7 Transparent Ceramics

3 at.% Eu³⁺‐doped La_2?xGd_xZr₂O₇ (x = 0–2.0) transparent ceramics were fabricated by vacuum sintering. The effect of Gd content on crystal structure, in‐line transmittance, and luminescence property of the ceramics were investigated. The ceramics are all cubic pyrochlore structure with high transparency. The cut‐off edge of the transmittance curve of the ceramics varied with Gd content and was also affected by the annealing process. The luminescence intensity became stronger for the ceramics annealed in air. As Gd content increased, the energy band structure as well as the luminescence behavior of the ceramics was changed; in addition, the symmetry of the crystal lattice reduced, resulting in the shift of the strongest luminescence peak from 585 nm to around 630 nm.     

Influence of B-site substituent Ce on thermophysical,oxygen diffusion,and mechanical properties of La2Zr2O7

Pyrochlore-type La₂Zr₂O₇ (LZ) is a promising candidate for high-temperature thermal barrier coatings (TBCs). However, its thermal expansion coefficient and low fracture toughness are not optimal for such application and thus, need to be improved. In this study, we systematically report the effect of CeO₂ addition on phase formation, oxygen-ion diffusion, and thermophysical and mechanical properties of full compositions La₂(Zr₁?_xCe_x)₂O₇ (x = 0, 0.1, 0.3, 0.5, 0.7, 0.9, 1). La₂(Zr₁?_xCe_x)₂O₇ exhibits a pyrochlore structure at x ≤ 0.3, while a fluorite structure is observed outside this range. With the increase in CeO₂ content, thermal expansion coefficient and oxygen-ion diffusivity in La₂(Zr₁?_xCe_x)₂O₇ are increased. Oxygen-ion diffusivity of La₂(Zr₁?_xCe_x)₂O₇ is two orders of magnitude less than that of classical 8YSZ. Among La₂(Zr₁?_xCe_x)₂O₇ compounds, La₂(Zr_0.7Ce_0.3)₂O₇ and La₂(Zr_0.5Ce_0.5)₂O₇ exhibit relatively low oxygen diffusivities. The composition La₂(Zr_0.5Ce_0.5)₂O₇ presents the lowest thermal conductivity due to the strongest phonon scattering and also the highest fracture toughness due to the solid-solution toughening. The highest sintering resistance is achieved by the composition La₂(Zr_0.7Ce_0.3)₂O₇ because of its ordered pyrochlore structure and high atomic mass of Ce. Based on these results, the compositions La₂(Zr_0.5Ce_0.5)₂O₇ and La₂(Zr_0.7Ce_0.3)₂O₇ are alternatives for classical 8YSZ for TBC materials operating at ultrahigh temperatures.     

Tb3+/Yb3+ co-doped Y2O3 upconversion transparent ceramics: Fabrication and characterization for IR excited green emission

Tb³⁺/Yb³⁺ co-doped Y₂O₃ transparent ceramics were fabricated by vacuum sintering of the pellets (prepared from nanopowders by uniaxial pressing) at 1750 °C for 5 h. Zr⁴⁺ and La³⁺ ions were incorporated in Tb³⁺/Yb³⁺ co-doped Y₂O₃ nanoparticle to reduce the formation of pores which limits the transparency of ceramic. An optical transmittance of ∼80% was achieved in ∼450 to 2000 nm range for 1 mm thick pellet which is very close to the theoretical value by taking account of Fresnel’s correction. High intensity luminescence peak at 543 nm (green) was observed in these transparent ceramics under 976 and 929 nm excitations due to Yb–Tb energy transfer upconversion.     

Vacuum sintering of highly transparent La1.28Yb1.28Zr2O7.84 ceramic using nanosized raw powders

Highly transparent La_1.28Yb_1.28Zr₂O_7.84 ceramic was prepared by vacuum sintering using nanosized raw powders, which were synthesized by a simple solution combustion method using rare earth nitrate as the raw materials. The as-burnt powders were calcined at 1200?℃ and then ball-milled for 24?h with resultant particle size of about 60?nm. The two phases, cubic pyrochlore and defective fluorite, are uniformly distributed in the ceramic. La_1.28Yb_1.28Zr₂O_7.84 transparent ceramic with the maximum in-line transmittance of 83.9% was successfully prepared at 1850?℃ for 6?h in a vacuum furnace.     

Coprecipitation synthesis and sintering property of (YbxSm1-x)2Zr2O7 ceramic powders

Abstract

Abstract

(Yb_xSm_1-x)₂Zr₂O₇ (0<x<1·0) ceramic powders were synthesised with chemical coprecipitation and calcination method. Thermal decomposition behaviour of precipitates was studied by differential scanning calorimetry-thermogravimetry. The powders were characterised by X-ray diffractometry, scanning electron microscopy and transmission electron microscopy with energy dispersive spectroscopy. The synthesised powders have a particle size of about 100?nm, and exhibit to a certain extent agglomeration. The sintering behaviour of (Yb_xSm_1-x)₂Zr₂O₇ powders was studied by pressureless sintering method at 1550-1700°C for 10?h in air. The relative densities of (Yb_xSm_1-x)₂Zr₂O₇ ceramics increase with increasing sintering temperature, and reach above 95% when sintered at 1700°C for 10?h in air. Sm₂Zr₂O₇ and (Yb_0·1Sm_0·9)₂Zr₂O₇ ceramics have a pyrochlore structure; however, (Yb_xSm_1-x)₂Zr₂O₇ (0·3<x<1·0) ceramics exhibit a defective fluorite type structure.     

Investigation on La3+ and Dy3+ co-doped ceria ceramics with an optimized average atomic number of dopants for electrolytes in IT-SOFCs

In the present study, we investigate the fundamental properties of CeO₂ by selecting La³⁺ (57), and Dy³⁺ (66) as dopants with optimized average atomic number of 61.5, which lies in between Pm³⁺ (62) and Sm³⁺ (62) in accordance with the criteria for optimum doping. A system of co-doped ceria ceramics Ce_1–x–yLa_xDy_yO_2-δ ((x, y) = (0.00, 0.00), (0.025, 0.025), (0.05, 0.05), (0.075, 0.075), (0.10, 0.10), (0.00, 0.20) and (0.20, 0.00)) as electrolytes for intermediate temperature solid oxide fuel cells were successfully prepared by a well-known sol-gel auto-combustion route. In order to obtain dense samples, the prepared pellets were sintered in air at 1300 °C for 4 h using conventional furnace and relative densities of all the samples were found to be higher than 95%. Single phase cubic structure, microstructural density and elemental composition analysis of all the samples were studied by powder X-ray diffraction, scanning electron microscope and energy dispersive spectroscopy techniques, respectively. Raman spectroscopy analysis confirmed the formation of concentrated O^2-–vacancies in the co-doped ceria system. Impedance spectroscopy measurements revealed the high value of total ionic conductivity and low activation energy for the composition Ce_0.85La_0.075Dy_0.075O_2?δ i.e., 2.08 × 10^–2 S cm^–1 and 0.58 eV, respectively. Linear thermal expansion analyses of all the samples revealed the matched thermal expansion coefficients. Finally, these results recommend that the Ce_0.85La_0.075Dy_0.075O_2?δ sample can be useful as a solid electrolyte in IT-SOFC applications.     

Influence of ytterbium- and samarium-oxides codoping on structure and thermal conductivity of zirconate ceramics

To increase operating temperature and improve performance of gas-turbine engines, it is urgently needed to develop new thermal barrier oxides with a lower thermal conductivity than 6–8 wt.% yttria-stabilized zirconia. (Yb_xSm_1?x)₂Zr₂O₇ (0 ≤ x ≤ 1.0) ceramics were synthesized by pressureless-sintered at 1700 °C for 10 h in air. The relative density, phase structure, morphology and thermal diffusivity coefficients of (Yb_xSm_1?x)₂Zr₂O₇ ceramics were investigated by the Archimedes method, X-ray diffraction, scanning electron microscopy and laser-flash method. Sm₂Zr₂O₇ and (Yb_0.1Sm_0.9)₂Zr₂O₇ ceramics exhibit a pyrochlore structure, while (Yb_xSm_1?x)₂Zr₂O₇ (0.3 ≤ x ≤1.0) ceramics have a defect fluorite-type structure. The thermal conductivities of (Yb_xSm_1?x)₂Zr₂O₇ ceramics first gradually decrease with increasing temperature, and then increase slightly above 800 °C due to the increased radiation contribution. YbSmZr₂O₇ ceramics have the lowest thermal conductivity over the entire temperature range, which is caused by the reduction of cation mean free path in ytterbium–samarium zirconate system.     

Influence of Al-substitution on structures,resistivity and magnetic properties of LaxSr(2−x)Fe(1+y)Mo(1−y)O6 (x=3y,y=0.05, 0.1, 0.15, 0.2)

Two series of single-phased La_xSr_(2−x)Fe_(1+y)Mo_(1−y)O₆ and La_xSr_(2−x)Fe_(1+0.5y)Al_0.5yMo_(1−y)O₆ (x=3y, y=0.05, 0.1, 0.15 and 0.2) double perovskites were prepared by solid-state reaction. The effects of Al-substitution on the structures, resistivity and magnetic properties of La_xSr_(2−x)Fe_(1+y)Mo_(1−y)O₆ were investigated. Although Al-replacement exhibits a negligible influence of on the B-site ordering degree, it results in the suppression of magnetisation caused by non-magnetic Al³⁺ ions. Reduction of grain sizes leads to increased resistivity, thus an optimised magnetoresistance (MR) behaviour is observed. The greatest MR extent improvement can be obtained when y is 0.15 and the MR% of the Al-doped ceramics reaches −10.5% (10 K, 1 T), which is 2 times greater than that of the undoped ceramics (−4.6%, 10 K, 1 T). Interestingly, the Curie temperature (Tc) of both Al-doped and undoped samples maintained relatively constant values of approximately 420 K and 405 K, respectively, which were different results from the data obtained for similar electron-doping systems in the literature.     

Frequency and temperature independent (Nb0.5Ga0.5)x(Ti0.9Zr0.1)1-xO2 ceramics with giant dielectric permittivity and low loss

Nb⁵⁺ and Ga³⁺ co-doped Ti_0.9Zr_0.1O₂ ceramics were synthesized using the conventional solid-state reaction method. Single rutile-liked phase of octahedron structure were identified for all compositions in (Nb_0.5Ga_0.5)_x(Ti_0.9Zr_0.1)_1-xO₂ (NGT) with x = 0.01 to 0.10 by X-ray diffraction patterns coupled with Rietveld refinement. Microstructural scanning image, together with energy dispersive x-ray spectroscopy (EDX), revealed good chemical homogeneity in NGT samples. A giant dielectric permittivity of 5 × 10⁴ and a low loss of 0.02 was obtained in NGT with x = 0.01 due to the contribution of electron-pinned and defect-dipole effect. Furthermore, a temperature (-20–120 °C), frequency (0.1–10⁴ Hz) and bias electric field (100–200 V/mm) independent dielectric permittivity and loss was found in this composition, which is critical for potential applications of supercapacitors.     

Aqueous alkaline suitable gel system and related mechanism for highly transparent La0.4Gd1.6Zr2O7 ceramic preparation

In this work, a fabrication route combined optimized ISOBAM-104/TAC gel-casting (where TAC refers to triammonium citrate) and one-step sintering technology was developed to prepare highly transparent La_xGd_2-xZr₂O₇ (LGZO) ceramics. The gelling behavior in an alkaline environment was investigated, and the corresponding mechanism was systematically proposed for the advanced spontaneous gel system. The starting materials after ball milling were directly shaped into green bodies without any treatment, and high-quality LGZO ceramics were obtained by three-stage debinding and one-step sintering. The in-line transmittance of these ceramics reaches 74% at 1100 nm, which is about 95% of the theoretical value. This work not only establishes an efficient method to fabricate LGZO ceramics in large and complex shapes but also elucidates the gelling mechanism in alkaline, which expands the application of gel-casting technology in transparent ceramics.