Theory of “Cohesive” vs “Adhesive” Separation in an Adhering System

It is shown that there is limited validitity to the doctrine that true interfacial separation, in an adhering system, is highly improbable. An analysis employing the Griffith-Irwin crack theory yields these results: The important parameters are, difference in elastic moduli, ΔE; differences in g, the energy dissipation per unit crack extension; thickness, Δ₁ or δ₂, of the region where dissipation occurs; and the presence or absence of strong interfacial bonds. If the forces across the interface are appreciably weaker than the cohesive forces in either phase, there is a strong minimum in g at the interface. For flaws of equal size, an interfacial flaw will be the site of initiation of failure. If strong interfacial bonds are present, then if Δg and ΔE have the same sign, failure is most probable, deep within one phase. If Δg and ΔE have opposite signs, failure may be initiated, and may propagate, at a distance δ from the interface, in the phase with lower g. This may be mistaken for weak-boundary layer failure.     

Toward “Rubbery” nanoparticles

The synthesis of electrically Conducting Natural Rubber (CNR) nanoparticles from natural rubber (cis 1, 4 polyisoprene) by a simple chemical doping technique is reported for the first time. Much before the establishment of conjugation as a precondition for polymers to be conducting a typical nonconjugated polymer like cis 1,4 polyisoprene was shown to develop intrinsic conductivity on doping. However, the possibility of developing conducting nanoparticles of natural rubber by doping has never been explored. Doping of natural rubber solution with Antimony pentchloride is found to lead to the formation of nanosized rubber particles with improved thermal stability and lower degradation characteristics than that of pristine rubber. Transmission electron microscopy and Dynamic Light Scattering experiments revealed a highly uniform dispersion of the particles with sizes in the range of 4 nm. The doped nanoparticles are found to retain “rubbery” properties of natural rubber and therefore these can be rightly termed as Rubber Nano particles. The development of nanoparticles of rubber assumes great significance in that it would lead to hitherto unknown applications for natural rubber in micro applications‐like sensors, and optoelectronics devices to macro applications such as compatible reinforcing fillers for elastomers and plastics to replace conventional fillers like carbon particles. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013