电压模式n阶CFA低通滤波器的设计

提出了一种仅用电流反馈放大器(current feedback amplifier,CFA)实现的高阶电压模式低通滤波器,给出了系统的设计公式.给出了4阶Butterworth低通滤波器应用示例,经Pspice仿真分析,结果表明,所提出的设计方法可行.该设计方法具有电路结构简单、元器件数目少等优点.     

一种新颖的电压模式通用二阶CFA滤波器设计

提出了一种仅用2个电流反馈放大器(CFA)实现的三输入单输出电压模式通用二阶滤波器电路。该电路由2个电流反馈放大器(CFA)、2个电容、3个电阻构成,他能实现二阶低通、带通、高通、陷波、全通滤波函数。分析了该电路的电压传输函数及电路参数,并用PSpice对该电路进行了仿真,仿真结果表明,该电路设计正确,电路结构简单,所用元器件少。     

电压模式n阶CCII+低通滤波器的设计

提出了一种仅仅用第二代电流传送器(CCII+)实现的高阶电压模式低通滤波器,推导了系统的设计公式。设计了六阶Butterworth低通滤波器,并用PSPICE进行仿真分析。设计和仿真结果表明,该低通滤波器电路设计正确,电路结构简单,所用的元器件数目较少。     

电压模式n阶CCⅡ+低通滤波器的设计

提出了一种仅仅用第二代电流传送器(CCⅡ )实现的高阶电压模式低通滤波器,推导了系统的设计公式.设计了六阶Butterworth低通滤波器,并用PSPICE进行仿真分析.设计和仿真结果表明,该低通滤波器电路设计正确,电路结构简单,所用的元器件数目较少.     

基于电流反馈放大器的电压模式五阶低通滤波器实现

应用信号流图法对五阶无源低通滤波电路直接模拟，提出了电流反馈放大器(current-feedback amplifier，简称CFA)的新颖的连续时间电压模式有源滤波电路。面向实际电路，完成了PSpice仿真，结果表明所提出的电路方案正确有效。     

新颖的电压模式一阶低通—高通滤波器

本文提出了用第二代电流传送器（ＣＣＩＩ－）实现的电压模式一阶低通－高通滤波电路、计算机仿真结果表明了此电路的可行性和正确性。     

电压型双二次滤波函数的CFA实现

提出了一种采用电流反馈放大器（current-feedback amplifier,CFA)实现的电压模式双二次滤波函数断电器，同时得到了陷波、高通、带通、低通和双二次滤波函数输出。且极点角频率与品质因素独立可调。计算机仿真结果与理论分析相符。     

一种基于OTA和CCII实现的n阶低通滤波器

提出了用信号流图法设计n阶基于OTA（跨导运算放大器）和CCII（第二代电流传输器）电流模式低通滤波器的方法。该滤波器由具有双输出端的平衡滤波器和第二代电流传输器及接地电容构成。与同类电路比较,设计更简便,结构更简单,无源元件全部接地,易于集成。     

电流模式N阶CCCII(±)-C低通滤波器的系统设计

提出了一种基于多输出电流控制传送器(multiple outputs current controlled conveyor II,CCCII±)的多环反馈电流模式n阶低通滤波器的系统设计方法.用该方法可产生出多种不同结构的n阶低通滤波器.所有n阶滤波器均由 个CCCII±及n个接地电容组成.面向实际电路,完成了PSpice仿真,结果表明所提出的电路方案正确有效.     

一种计算CFA电压负反馈放大器增益的简便方法

对于电流反馈运算放大器(CFA)构成的电压负反馈放大器,根据反馈放大电路的基本方程,利用拆环法,通过先计算环路增益AHS,再计算开环增益AS,最后给出了该放大器的源增益、增益的表达式.结果表明:对CFA施加电压并联负反馈,源增益将改变1/(1-AHs);电压增益、互导增益改变1/(1-AH);电流增益、互阻增益改变1/(1-AH').对CFA施加电压串联负反馈,结论相同,只是AHS、AH、AH'三者相等,与基于电压反馈运算放大器(VFA)的电压负反馈放大器结论有较大差别.     

Electronically tunable voltage-mode universal filter with single-input five-output using simple OTAs

This article presents a new electronically tunable voltage-mode universal biquadratic filter with single-input five-output using simple operational transconductance amplifiers (OTAs) and grounded capacitors. The proposed configuration provides low-pass, band-pass, high-pass, band-stop and all-pass voltage responses at a high-impedance input terminal that enables easy cascading in voltage-mode. The natural frequency and the quality factor can be set orthogonally by adjusting the circuit components. The natural frequency can also be controlled electronically by adjusting the bias currents of the OTAs. For realising all the five standard filtering functions, no critical-matching conditions are imposed and all the incremental parameter sensitivities are low. Experimental and simulation results that confirm the theoretical predictions are given.     

模拟跨阻低通滤波器的设计

跨阻滤波器的输入为电流信号,输出为电压信号.本文给出了跨阻滤波器的设计方法,并按照品质因数Q的低、中、高详细介绍了三种双二阶节跨阻低通滤波器的电路拓扑结构及其参数计算方法.二阶跨阻低通滤波器与传统滤波器相级联即可实现高阶跨阻低通滤波器.最后,通过高阶跨阻低通滤波器的设计实例,验证文中所给出的设计方法的有效性.     

一种基于电流反馈放大器的新的通用滤波器

本文介绍了电流反馈放大器（CFA）的基本原理,用四个CFA和几个电阻、电容设计了一种三输入单输出的新的通用滤波器。这种滤波器在无需电阻电容匹配的情况下,能实现二阶的低通、带通、高通、带阻以及全通五种滤波功能。每种滤波功能的特征角频率ω0都能由接地电容调节,而品质因数Q可由接地电阻单独调节。该滤波器对有源和无源元件的灵敏度都不超过1。利用PSPICE软件对电路图进行了仿真,仿真结果与理论分析一致。     

New voltage-mode universal filter and sinusoidal oscillator using only single DBTA

In this article, a new voltage-mode second-order universal frequency filter and sinusoidal oscillator using only single differential-input buffered and transconductance amplifier (DBTA) is presented. The proposed voltage-mode filter structure using single DBTA and four passive elements can provide all standard filter functions, i.e. low-, band-, high-pass, band-stop, and all-pass without changing the circuit topology and enables independent control of the quality factor Q using single passive element. The circuit requires the minimal number of active and passive elements with no conditions for component matching. By slight modification of the proposed filter structure, the new DBTA-based sinusoidal oscillator is easily obtained. The oscillation condition and the oscillation frequency are independently adjustable by different virtually grounded passive elements. The proposed sinusoidal oscillator employs only grounded capacitors. The passive and active sensitivities of all the proposed circuit configurations are low. PSPICE simulations using a BJT realisation of DBTA and experimental results based on commercially available amplifiers OPA860 and MAX436 are included, which prove the workability of the proposed circuits.     

基于MOCCII的多环反馈电流模式滤波器的系统设计

本文提出一种n阶多环反馈(multiple-loop feedback)MOCCII(多端输出第二代电流传输器)电流模式滤波器的系统设计方法。用该方法可产生出多种不同结构的n阶多环反馈滤波器,所有n阶滤波器均由n个MOCCII及2n个RC无源元件组成。所产生滤波器的所有RC元件均接地,便于集成。文中还给出了四阶巴特沃斯滤波器的设计举例及PSPICE计算机模拟结果。     

Voltage/Current-Mode Universal Filter Using FTFN and CFA

A novel configuration for realizing voltage/current-mode (VM/CM) universal filter using a single four terminal floating nullor (FTFN), a single current feedback amplifier (CFA), two capacitors and three resistors is presented. The VM configuration has three inputs and a single output and implements all the five generic filtering functions through the selection of inputs. This topology enjoys cascadability and does not require any additional active element for facilitating the filter realizations. The same circuit in current-mode has a single input and four outputs and realizes LP, HP and two BP responses simultaneously from which AP and Notch can also be realized. This topology uses grounded resistors and capacitors which are ideal for monolithic integration. Both the topologies enjoy orthogonal control of natural frequency (ω₀) and quality factor (Q) by the grounded resistors. The topologies enjoy low active and passive sensitivity figures. Experimental and PSPICE simulation results are also included.     

小型化超宽阻带共面波导低通滤波器设计

为了解决传统CPW低通滤波器尺寸偏大、阻带较窄和插入损耗偏大的问题,采用 /4阶梯阻抗谐振单元（SIR）加载半圆形并联枝节（SISS）和缺陷地结构（DGS）单元的紧凑型结构设计了一个5阶CPW低通滤波器,分析了各单元结构参数对阻带性能的影响,引入微带线补偿方法对共面波导中心导体线特性阻抗进行局部补偿,改善了阻抗匹配性能,进一步降低了通带内的回波损耗和插入损耗。测试结果表明：该滤波器结构尺寸25mm×18mm,3dB截止频率3.5GHz,阻带范围3.8～17GHz。实现了CPW低通滤波器的低插入损耗、超宽阻带和小型化。