Gel polymer electrolyte based on poly(acrylonitrile-co-styrene) and a novel organic iodide salt for quasi-solid state dye-sensitized solar cell

A gel polymer electrolyte based on poly(acrylonitrile-co-styrene) as polymer matrix and N-methyl pyridine iodide salt as I⁻ source was prepared. Controlling the concentration of polymer matrix of poly(acrylonitrile-co-styrene) at 17.5 wt.%, mixing the binary organic solvents mixture ethylene carbonate and propylene carbonate with 6:4 (w/w), and the concentration of N-methyl pyridine iodide and iodine with 0.5 and 0.05 M, respectively, the gel polymer electrolyte attains the maximum ionic conductivity (at 30 °C) of 4.63 mS cm⁻¹. Based on the gel polymer electrolyte, a quasi-solid state dye-sensitized solar cell was fabricated and its overall energy conversion efficiency of light-to-electricity of 3.10% was achieved under irradiation of 100 mW cm⁻².     

Novel chemically cross-linked solid state electrolyte for dye-sensitized solar cells

Poly(vinylpyridine-co-ethylene glycol methyl ether methacrylate) (P(VP-co-MEOMA)) and α,ω-diiodo poly(ethylene oxide-co-propylene oxide) (I[(EO)_0.8-co-(PO)_0.2]_yI) were synthesized and used as chemically cross-linked precursors of the electrolyte for dye-sensitized solar cells. Meanwhile, α-iodo poly(ethylene oxide-co-propylene oxide) methyl ether (CH₃O[(EO)_0.8-co-(PO)_0.2]_xI) was synthesized and added into the electrolyte as an internal plasticizer. Novel polymer electrolyte resulting from chemically cross-linked precursors was obtained by the quaterisation at 90 °C for 30 min. The characteristics for this kind of electrolyte were investigated by means of ionic conductivity, thermogravimetric and photocurrent-voltage. The ambient ionic conductivity was significantly enhanced to 2.3 × 10⁻⁴ S cm⁻¹ after introducing plasticizer, modified-ionic liquid. The weight loss of the solid state electrolyte at 200 °C was 1.8%, and its decomposition temperature was 287 °C. Solid state dye-sensitized solar cell based on chemically cross-linked electrolyte presented an overall conversion efficiency of 2.35% under AM1.5 irradiation (100 mW cm⁻²). The as-fabricated device maintained 88% of its initial performance at room temperature even without sealing for 30 days, showing a good stability.     

Influence of solvent on the poly (acrylic acid)-oligo-(ethylene glycol) polymer gel electrolyte and the performance of quasi-solid-state dye-sensitized solar cells

The influence of solvents on the property of poly (acrylic acid)-oligo-(ethylene glycol) polymer gel electrolyte and photovoltaic performance of quasi-solid-state dye-sensitized solar cells (DSSCs) were investigated. Solvents or mixed solvents with large donor number enhance the liquid electrolyte absorbency, which further influences the ionic conductivity of polymer gel electrolyte. A polymer gel electrolyte with ionic conductivity of 4.45 mS cm⁻¹ was obtained by using poly (acrylic acid)-oligo-(ethylene glycol) as polymer matrix, and absorbing 30 vol.% N-methyl pyrrolidone and 70 vol.% γ-butyrolactone with 0.5 M NaI and 0.05 M I₂. By using this polymer gel electrolyte coupling with 0.4 M pyridine additive, a quasi-solid-state dye-sensitized solar cell with conversion efficiency of 4.74% was obtained under irradiation of 100 mW cm⁻² (AM 1.5).     

Electrochemical properties of novel ionic liquids for electric double layer capacitor applications

An aliphatic quaternary ammonium salt which has a methoxyethyl group on the nitrogen atom formed an ionic liquid (room temperature molten salt) when combined with the tetrafluoroborate (BF₄⁻) and bis(trifluoromethylsulfonyl)imide [TFSI; (CF₃SO₂)₂N⁻] anions. The limiting oxidation and reduction potentials, specific conductivity, and some other physicochemical properties of the novel ionic liquids, N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium tetrafluoroborate (DEME-BF₄) and DEME-TFSI have been evaluated and compared with those of 1-ethyl-3-methylimidazolium tetrafluoroborate. DEME-BF₄ is a practically useful ionic liquid for electrochemical capacitors as it has a quite wide potential window (6.0 V) and high ionic conductivity (4.8 mS cm⁻¹ at 25 °C). We prepared an electric double layer capacitor (EDLC) composed of a pair of activated carbon electrodes and DEME-BF₄ as the electrolyte. This EDLC (working voltage ∼2.5 V) has both, a higher capacity above room temperature and a better charge-discharge cycle durability at 100 °C when compared to a conventional EDLC using an organic liquid electrolyte such as a tetraethylammonium tetrafluoroborate in propylene carbonate.     

Application of poly(acrylic acid-g-gelatin)/polypyrrole gel electrolyte in flexible quasi-solid-state dye-sensitized solar cell

A novel gel polymer electrolyte based on poly(acrylic acid-g-gelatin)/polypyrrole with conductivity of 14.1 mS cm⁻¹ was prepared. Based on the gel electrolyte, a flexible quasi-solid-state dye-sensitized solar cell was fabricated by using a low-temperature filming technique. Owing to high conductivity and the catalytic function of polypyrrole for I⁻/I₃⁻ redox reaction for the gel electrolyte, the flexible quasi-solid-state dye-sensitized solar cell showed a light-to-electric energy conversion efficiency of 1.28%, under a simulated solar light irradiation with intensity of 100 mW cm⁻² (AM 1.5).     

Influence of ionic additives NaI/I2 on the properties of polymer gel electrolyte and performance of quasi-solid-state dye-sensitized solar cells

The ionic additives NaI/I₂ in polymer gel electrolyte not only provide cations, but also affect the liquid electrolyte absorbency of the poly(acrylic acid)-poly(ethylene glycol) hybrid, which results in the change of ionic conductivity of polymer gel electrolyte and the photovoltaic performance of quasi-solid-state dye-sensitized solar cell. With the optimized components of liquid electrolyte containing 0.5 M NaI, 0.05 M I₂, 0.4 M pyridine, 70 vol.% γ-butyrolactone and 30 vol.% N-methylpyrrolidone, a 4.74% power conversion efficiency of quasi-solid-state dye-sensitized solar cell was obtained under 100 mW cm⁻² (AM 1.5) irradiation.     

Fabrication and characterization of composite electrolyte for intermediate-temperature SOFC

In this study, a ceria-based composite electrolyte was investigated for intermediate-temperature solid oxide fuel cells (SOFCs) based on SDC-25 wt.% K₂CO₃. Sodium carbonate co-precipitation process by which SDC powder was adopted and sound cubic fluorite structure was formed after SDC powders were sintered at 750 °C for 3 h. The crystallite size of the particle was 21 nm in diameter as calculated from data obtained through X-ray diffraction. The conductivity of the composite electrolyte proposed in this study was much higher than that of pure SDC at the comparable temperature of 550-700 °C. The transition of the ionic conductivity occurred at 650 °C. Based on this type of composite electrolyte, single cell with the electrolyte thickness of 0.3 mm were fabricated using dry pressing, with nickel oxide adopted as anode and SSC as cathode. The single cell was then tested at 550-700 °C on home-made equipment in this study, using hydrogen/air. The maximum power density and open circuit voltage (OCV) achieved 600 mW cm⁻² and 1.05 V at 700 °C, respectively.     

Synthesis and electrochemical properties of lithium methacrylate-based self-doped gel polymer electrolytes

In this study, a strategy for synthesizing lithium methacrylate (LiMA)-based self-doped gel polymer electrolytes was described and the electrochemical properties were investigated by impedance spectroscopy and linear sweep voltammetry. LiMA was found to dissolve in ethylene carbonate (EC)/diethyl carbonate (DEC) (3/7, v/v) solvent after complexing with boron trifluoride (BF₃). This was achieved by lowering the ionic interactions between the methacrylic anion and lithium cation. As a result, gel polymer electrolytes consisting of BF₃-LiMA complexes and poly(ethylene glycol) diacrylate were successfully synthesized by radical polymerization in an EC/DEC liquid electrolyte. The FT-IR and AC impedance measurements revealed that the incorporation of BF₃ into the gel polymer electrolytes increases the solubility of LiMA and the ionic conductivity by enhancing the ion disassociations. Despite the self-doped nature of the LiMA salt, an ionic conductivity value of 3.0 × 10⁻⁵ S cm⁻¹ was achieved at 25 °C in the gel polymer electrolyte with 49 wt% of polymer content. Furthermore, linear sweep voltammetry measurements showed that the electrochemical stability of the gel polymer electrolyte was around 5.0 V at 25 °C.     

Increasing ionic conductivity and mechanical strength of a plastic electrolyte by inclusion of a polymer

In this contribution we present a soft matter solid electrolyte which was obtained by inclusion of a polymer (polyacrylonitrile, PAN) in LiClO₄/LiTFSI-succinonitrile (SN), a semi-solid organic plastic electrolyte. Addition of the polymer resulted in considerable enhancement in ionic conductivity as well as mechanical strength of LiX-SN (X = ClO₄, TFSI) plastic electrolyte. Ionic conductivity of 92.5%-[1 M LiClO₄-SN]:7.5%-PAN (PAN amount as per SN weight) composite at 25 °C recorded a remarkably high value of 7 × 10⁻³ Ω⁻¹ cm⁻¹, higher by few tens of order in magnitude compared to 1 M LiClO₄-SN. Composite conductivity at sub-ambient temperature is also quite high. At −20 °C, the ionic conductivity of (100 − x)%-[1 M LiClO₄-SN]:x%-PAN composites are in the range 3 × 10⁻⁵-4.5 × 10⁻⁴ Ω⁻¹ cm⁻¹, approximately one to two orders of magnitude higher with respect to 1 M LiClO₄-SN electrolyte conductivity. Addition of PAN resulted in an increase of the Young's modulus (Y) from Y → 0 for LiClO₄-SN to a maximum of 0.4 MPa for the composites. Microstructural studies based on X-ray diffraction, differential scanning calorimetry and Fourier transform infrared spectroscopy suggest that enhancement in composite ionic conductivity is a combined effect of decrease in crystallinity and enhanced trans conformer concentration.     

Influence of molecular weight of PEG on the property of polymer gel electrolyte and performance of quasi-solid-state dye-sensitized solar cells

A new kind of polymer gel electrolyte based on poly(acrylic acid)-poly(ethylene glycol) (PAA-PEG) hybrid was synthesized. The factor of molecular weight of PEG in the hybrid plays an important role in determining the liquid electrolyte absorbency of the hybrid and ionic conductivity of the polymer gel electrolyte, sequentially affects the photovoltaic performance of quasi-solid-state dye-sensitized solar cells. Using the hybrid with PEG molecular weight of 20,000, a polymer gel electrolyte with liquid electrolyte absorbency of 6.9 g g⁻¹ and ionic conductivity of 5.35 mS cm⁻¹ was obtained. Based on the polymer gel electrolyte, a quasi-solid-state dye-sensitized solar cell with conversion efficiency of 5.25% was achieved under irradiation of AM 1.5, 100 mW cm⁻².     

Effect of zwitterionic salt on the electrochemical properties of a solid polymer electrolyte with high temperature stability for lithium ion batteries

In this study, we prepare a kind of solid polymer electrolyte (SPE) based on N-ethyl-N′-methyl imidazolium tetrafluoroborate (EMIBF₄), LiBF₄ and poly(vinylidene difluoride-co-hexafluoropropylene) [P(VdF-HFP)] copolymer. The resultant SPE displays high thermal stability above 300 °C and high room temperature ionic conductivity near to 10⁻³ S cm⁻¹. Its electrochemical properties are improved with incorporation of a zwitterionic salt 1-(1-methyl-3-imidazolium)propane-3-sulfonate (MIm3S). When the SPE contains 1.0 wt% of the MIm3S, it has a high ionic conductivity of 1.57 × 10⁻³ S cm⁻¹ at room temperature, the maximum lithium ions transference number of 0.36 and the minimum apparent activation energy for ions transportation of 30.9 kJ mol⁻¹. The charge-discharge performance of a Li₄Ti₅O₁₂/SPE/LiCoO₂ cell indicates the potential application of the as-prepared SPE in lithium ion batteries.     

A highly conductive organic-inorganic hybrid electrolyte based on co-condensation of di-ureasil and ethylene glycol-containing alkoxysilane

Organic-inorganic hybrid electrolytes based on di-ureasil backbone structures by reacting poly(propylene glycol)-block-poly(ethylene glycol)-block-poly(propylene glycol) bis(2-aminopropyl ether) (ED2000) with 3-(triethoxysilyl)propyl isocyanate (ICPTES), followed by co-condensation with methoxy(polyethylenoxy)propyl trimethoxysilane (MPEOP) in the presence of LiClO₄ were prepared and characterized by a variety of techniques. The hybrid electrolytes showed good resistance to crystallization and excellent conductivity for use in lithium-ion batteries, as determined by differential scanning calorimetry (DSC) and impedance measurements, respectively. The temperature dependence of the ionic conductivity exhibited a VTF (Vogel-Tamman-Fulcher)-like behavior for all the compositions studied and a maximum ionic conductivity value of 6.9 × 10⁻⁵ S cm⁻¹, a relatively high value for solid polymer electrolytes, was achieved at 30 °C for the hybrid electrolyte with a [O]/[Li] ratio of 16. A microscopic view of the dynamic behavior of the polymer chains (¹³C) and the ionic species (⁷Li) was provided by the ¹H and ⁷Li line widths measured from 2D ¹H-¹³C WISE (Wideline Separation) and variable temperature ⁷Li static NMR, respectively, to elucidate the influence of the mobility of the polymer chains and the charge carriers on the observed ionic conductivity. The present salt-free hybrid electrolyte after plasticization with 1 M LiClO₄ in EC/PC solution exhibited a swelling ratio of 275% and reached an ionic conductivity value up to 8.3 × 10⁻³ S cm⁻¹ at 30 °C, which make it a good candidate for the further development of advanced rechargeable lithium-ion batteries.     

A polyblend electrolyte (PVP/PEG+KI+I2) for dye-sensitized nanocrystalline TiO2 solar cells

A novel polyblend electrolyte consisting of KI and I₂ dissolved in a blending polymer of polyvinyl pyrrolidone (PVP) and polyethylene glycol (PEG) was prepared. The formation of ⁻I₃ in the polymer electrolyte was confirmed by X-ray photoelectron spectroscopy (XPS) characterization. Due to the coordinating and plasticizing effect by PVP, the ionic conductivity of the polyblend electrolyte is enhanced. The highest ionic conductivity of 1.85 mS cm⁻¹ for the polyblend electrolyte was achieved by optimizing the compositions as 40 wt.% PVP + 60 wt.% PEG + 0.05 mmol g⁻¹ I₂ + 0.10 mmol g⁻¹ KI. Based on the polyblend electrolyte, a DSSC with fill factor of 0.59, short-circuit density of 9.77 mA cm⁻², open-circuit voltage of 698 mV and light-to-electricity conversion efficiency of 4.01% was obtained under AM 1.5 irradiation (100 mW cm⁻²).     

The preparation of poly(glycidyl acrylate)-polypyrrole gel-electrolyte and its application in dye-sensitized solar cells

A microporous hybrid of poly(glycidyl acrylate)-polypyrrole (PGA-PPy) was synthesized by a two-step solution polymerization. Using this hybrid as polymer host, a gel-electrolyte with high conductivity of 12.83 mS cm⁻¹ was prepared. The researches by scanning electron microscopy (SEM), Fourier transform infrared spectra (FTIR), and cyclic voltammetry (CV) show that the microporous structure and functional groups for PGA allows the higher absorbency and good ionic salt tolerance for the electrolyte, the introduction of PPy causes a lower charge-transfer resistance and higher electrocatalytic activity for the I₃⁻/I⁻ redox reaction for the electrolyte. Based on the electrolyte, a dye-sensitized solar cell with a light-to-electrical energy conversion efficiency of 5.03% is achieved, under illumination with a simulated solar light of 100 mW cm⁻² (AM 1.5).     

Nano-size LiAlO2 ceramic filler incorporated porous PVDF-co-HFP electrolyte for lithium-ion battery applications

The optimized composition of PVdF-co-HFP-LiAlO₂ based micro-porous nano-composite polymer electrolyte membranes (MPNCPEMs) was prepared with a preferential polymer dissolution process. Nitrogen adsorption isotherms and SEM micrographs showed that the enhanced ionic conductivity of polymer electrolyte was due to increase in pore-size, surface area and pore density, results an increase in the electrolyte uptake. The ac-impedance spectroscopy showed that the room temperature ionic conductivity of PVdF-co-HFP-LiAlO₂ based polymer electrolyte membranes increased with the removal of PVA content and attained the maximum ionic conductivity of 8.12 × 10⁻³ S cm⁻¹. The prepared MPNCPEM of high ionic conductivity was subjected into LSV study. Finally, the electrode/electrolyte interfacial resistance was evaluated by monitoring the impedance response at different time intervals.     

Ternary polymer electrolytes with 1-methylimidazole based ionic liquids and aprotic solvents

New polymer gel electrolytes containing ionic liquids were developed for modern chemical power sources—supercapacitors and lithium-ion batteries. Ternary systems polymer-ionic liquid-aprotic solvent as well as materials containing also lithium salts (LiClO₄ or LiPF₆) were prepared by direct, thermally initiated polymerisation. Poly(2-ethoxyethyl methacrylate) PEOEMA was combined with various ionic liquids based on 1-methylimidazole. Only 1-butyl-3-methylimidazolium hexafluorophosphate BMIPF₆ formed a homogenous and slightly translucent polymer electrolyte, where aprotic solvents—propylene carbonate and ethylene carbonates were used as plasticisers. Materials were studied using the electrochemical and thermogravimetric methods and exhibit high ionic conductivity up to 0.94 mS cm⁻¹ at 25 °C together with high electrochemical stability: the accessible potential window on the glassy carbon was found ca. 4.3 V. Prepared non-volatile materials are long-term and thermally stable up to 150 °C.     

The application of P(MMA-co-MAA)/PEG polyblend gel electrolyte in quasi-solid state dye-sensitized solar cell at higher temperature

A poly(methyl methacrylate-co-methacrylate acid)/poly(ethylene glycol) [P(MMA-co-MAA)/PEG] polyblend with viscoelasticity was synthesized by a copolymerizing reaction between methyl methacrylate (MMA) and methacrylate acid (MAA) using azobisisobutyronitrile (AIBN) as initiator in poly(ethylene glycol) (PEG) methanol solution. Then, a polyblend gel electrolyte was prepared by adding KI and I₂ to P(MMA-co-MAA)/PEG system. The influence of compositions of the polyblend gel electrolyte on the ionic conductivity and the effect of temperature on photoelectronic performance of quasi-solid state dye-sensitized solar cell (QS-DSSC) were discussed. It was found that the polyblend gel electrolyte was a good candidate as high-temperature electrolyte for QS-DSSCs. Under an optimized condition, the highest conductivity of the polyblend gel electrolyte was 2.70 mS/cm² at 30 °C. Based on the polyblend gel electrolyte, a light-to-electricity conversion efficiency of 4.85% for QS-DSSC was achieved under AM 1.5 simulated solar light illumination at 60 °C.     

Highly ion conductive flexible films composed of network polymers based on polymerizable ionic liquids

Ionic liquid-type polymer brushes having different hydrocarbon (HC) chain lengths between polymerizable group and imidazolium ring were synthesized. When the carbon number of HC chain was 6, the ionic liquid-type polymer brush exhibited the highest ionic conductivity of 1.37×10⁻⁴ S cm⁻¹ at 30 °C, reflecting low T_g of −60 °C. Moreover, for the first time, we succeeded in obtaining transparent and flexible films without considerable decrease in the ionic conductivity as compared with that of corresponding monomers by using suitable cross-linkers. The most ion conductive (1.1×10⁻⁴ S cm⁻¹ at 30 °C) film was obtained when tetra(ethylene glycol)diacrylate was used 0.5 mol% to ionic liquid monomer as the cross-linker. This film is one of excellent conductive films among single-ion conductive materials.     

Carbon nanotubes-polyethylene oxide composite electrolyte for solid-state dye-sensitized solar cells

Novel carbon nanotubes (CNTs)-polyethylene oxide (PEO) composite electrolyte for dye-sensitized solar cell (DSSC) was prepared and characterized for the first time. The strong bonding and interaction between CNTs and PEO in CNTs-PEO composites was observed by the characterization of X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and Raman spectra. The introduction of CNTs into PEO matrix significantly improved the electrolyte properties of DSSC such as roughness, amorphicity and ionic conductivity. The solid-state DSSC fabricated with the optimum composite electrolyte (added 1% CNTs in PEO matrix, 1%CNT-PEO) achieved maximum conversion efficiency of 3.5%, an open circuit voltage (V_OC) of 0.589 V, short circuit current density (J_SC) of 10.64 mA/cm² and fill factor (FF) of 56%. The highest IPCE in the DSSC fabricated with 1%CNT-PEO electrolyte is ascribed to the improved ionic conductivity of composite electrolytes and enhanced interfacial contact between electrode and electrolyte.     

Dye-sensitised photoelectrochemical solar cells with polyacrylonitrile based solid polymer electrolytes

Novel all solid state dye-sensitised photolectrochemical solar cells of the type, FTO-TiO₂-dye-PAN, EC, PC, Pr₄N⁺I⁻, I₂-Pt-FTO, have been fabricated and characterised using current-voltage characteristics and action spectra. Liquid electrolyte generally used for such solar cells has successfully replaced by a quasi solid electrolyte comprised of polyacrylonitrile (PAN) with ethylene carbonate (EC) and propylene carbonate (PC) as plasticisers and Pr₄N⁺I⁻/I₂ redox couple with tetrapropylammoniumiodide as the complexing salt. For the polymer electrolyte, the optimum conductivity of 2.95×10⁻³ S cm⁻¹ was obtained for the electrolyte composition, PAN:EC:PC=15:35:50 (wt.%). The short circuit current density (J_SC) and the open circuit voltage (V_OC) obtained for an incident light intensity of 600 W m⁻² were 3.73 mA cm⁻² and 0.69 V, respectively. This corresponds to an overall quantum efficiency of 2.99%. From the action spectrum, the maximum incident photon conversion efficiency (IPCE) of 33% was obtained for incident light of wavelength 480 nm.