Effect of a galvanostatic treatment on the preparation of highly ordered TiO2 nanotubes

This work is intended to define an optimal methodology of preparation of highly ordered TiO₂ nanotube arrays by a 60 V anodization in a glycol ethylene solution. The effect of the presence of an initial superficial oxide on the sample, before operating the anodization growth, has been analysed. The best result has been obtained by a galvanostatic oxide growth on the titanium sheet, before the anodization process. The photoconversion efficiency was measured and we have obtained a maximum value of 12.97%, strictly in line with the literature. We have also underlined the necessity to operate a heat treatment using only dry atmosphere.     

Synthesis of self-organized mixed oxide nanotubes by sonoelectrochemical anodization of Ti-8Mn alloy

Self ordered arrays of titanium manganese mixed oxide nanotubes were prepared by anodization of Ti8Mn alloy (UNS R56080) under ultrasonication in diluted ethylene glycol containing fluoride. The dimensions of the nanotubes (diameter: 20-100 nm and length: 0.5-2.0 μm) could be tuned by changing the synthesis parameters. The as-anodized nanotubes showed a stoichiometry of (Ti,Mn)O₂. Upon annealing at 500 °C in oxygen atmosphere, the nanotubes contained a mixture of anatase + rutile phases of TiO₂ and Mn₂O₃. The composition of the oxide nanotubes was influenced by the chemistry of the phases present in the alloy. More manganese content was observed in the oxide formed on the β-phase than in the oxide layer of α-phase. Anodization in the ultrasonic field increased the kinetics of nanotubular oxide formation and resulted in homogeneous ordering of the nanotubular arrays as compared to the anodization by conventional stirring in the fluoride containing ethylene glycol solution. Whereas, anodization in aqueous acidified fluoride solutions resulted in severe attack of the β-phase and did not show presence of nanotubular oxide structure.     

Electrochemically multi-anodized TiO2 nanotube arrays for enhancing hydrogen generation by photoelectrocatalytic water splitting

An enhanced hydrogen production by photoelectrocatalytic water splitting was obtained using extremely highly ordered nanotubular TiO₂ arrays in this work. Highly ordered TiO₂ nanotube arrays with a regular top porous morphology were grown by a facile and green three-step electrochemical anodization. The well ordered hexagonal concaves were uniformly distributed on titanium substrate by the first anodization, served as a template for further growth of TiO₂ nanotubes. As a result, the TiO₂ nanotube arrays constructed through the third anodization showed appreciably more regular architecture than that of the sample by conventional single anodization under the same conditions. The enhanced photoelectrochemical activity was demonstrated through the hydrogen generation by photoelectrocatalytic water splitting, with an exact H₂ evolution rate up to 420 μmol h⁻¹ cm⁻² (10 mL h⁻¹ cm⁻²) in 2 M Na₂CO₃ + 0.5 M ethylene glycol. The photocurrent density of the third-step anodic TiO₂ nanotubes is about 24 mA cm⁻² in 0.5 M KOH, which is 2.2 times higher than that of the normal TiO₂ nanotubes (∼11 mA cm⁻²) by a single electrochemical anodization.     

Preparation and magnetic properties of iron titanium oxide nanotube arrays

FeTi alloy was prepared by a vacuum smelting method, iron titanium oxide nanotube arrays have been made directly by anodization of the FeTi alloy. Morphologies and microstructures of the samples were characterized by scanning electron microscope, transmission electron microscope, and X-ray diffractometer. Influences of temperature and H₂O concentration on the morphologies of the nanotube arrays have been discussed in detail. Magnetic properties of the samples have also been investigated. The as-prepared samples were amorphous. When annealed at 500 °C and 550 °C, pesudobrookite Fe₂TiO₅ was obtained. At 600 °C, there were mixed Fe₂TiO₅, rutile TiO₂, and α-Fe₂O₃. Magnetic performance of the nanotube arrays exhibited high sensitivity to temperature and changed interestingly upon annealing. The values of the coercivity and remanence were 340 Oe and 0.061 emu/g respectively for the sample annealed at 550 °C.     

Electrochemical tuning of titania nanotube morphology in inhibitor electrolytes

The electrochemical behavior of fluorine containing electrolytes and its influence in controlling the lateral dimensions of TiO₂ nanotubes is thoroughly investigated. Potentiostatic anodization is carried out in three different electrolytes, viz., aqueous hydrofluoric acid (HF), HF containing dimethyl sulphoxide (DMSO) and HF containing ethylene glycol (EG). The experiments were carried out over a broad voltage range from 2 to 200 V in 0.1-48 wt% HF concentrations and different electrolytic compositions for anodization times ranging from 5 s to 70 h. The chemistry that dictates how the nature of electrolytes influences the morphology of nanotubes is discussed. Electrochemical impedance spectra were recorded for varying compositions of all the electrolytes. It was observed that composition of the electrolyte and its fluorine inhibiting nature has significant impact on nanotube formation as well as in controlling the aspect ratio. The inhibiting nature of EG is helpful in holding fluorine at the titanium anode, thereby allowing controlled etching at appropriate voltages. Thus our study demonstrates that HF containing EG is a promising electrolytic system providing wide tunability in lateral dimensions and aspect ratio of TiO₂ nanotubes by systematically varying the anodization voltage and electrolyte composition.     

Monolithic-like TiO2 nanotube supported Ru catalyst for activation of CH4 and CO2 to syngas

Highly-ordered TiO₂ nanotube arrays (TiNTA) were prepared by an electrochemical anodization method and used as the carrier material to load 1 wt.% Ru. The Ru/TiNTA catalyst was then applied to the combination reactions of the partial oxidation of methane reaction (POM) with the carbon dioxide reforming with methane reaction (CRM) for syngas production. In comparison with the commercial TiO₂ powder (P25) supported 1 wt.% Ru catalyst, Ru/TiNTA shows higher activity and much better stability. The superior performance of Ru/TiNTA is attributed to the specific monolithic-like structure and confinement effect of TiNTA.     

Enhanced visible light photocurrent generation at surface-modified TiO2 nanotubes

Photoelectrodes consisting of TiO₂ nanotube layers with different thicknesses (0.5 μm, 1.7 μm, 3 μm, 6 μm, 9 μm, and 18 μm) were prepared by anodization of titanium substrates and subsequent surface modification by a heat treatment at 400 °C in the presence of urea pyrolysis products. In contrast to unmodified TiO₂ nanotubes, the modified photoelectrodes exhibit photocurrents under visible light irradiation down to 750 nm. Photocurrent transients indicate enhanced recombination unless a suitable hole-scavenger, like iodide, is present since the photogenerated holes do not oxidize water efficiently. In the visible light the photoconversion efficiency increases significantly with nanotube length. The maximum incident photon-to-current efficiency (IPCE) was observed for tubes with the length of 6-9 μm (IPCE ∼4.5% and 1.4% at 450 nm and 550 nm, respectively) and the photocurrent enhancement with increasing tube length is found to be stronger at longer irradiations wavelengths.     

Hierarchical structured TiO2 nano-tubes for formaldehyde sensing

Hierarchical structured TiO₂ nano-tubes were prepared following a two-step method: the highly ordered uniform TiO₂ nanotube arrays were first grown by the conventional electrochemical anodization of the Ti metal sheet followed by mechanical milling of the as-fabricated TiO₂ nanotube arrays. The obtained nanotubes with a length around 400 nm and opening diameter ∼100 nm were formed mixed with the spherical TiO₂ single crystals with a diameter around 10 nm indicating hierarchical nanostructure. The as-synthesized TiO₂ hierarchical nanotubes based resistive-type chemical sensor exhibits good sensitivity to formaldehyde at room temperatures with or without UV-irradiation. The response of the sensor increased almost linearly as a function of the concentration of formaldehyde from 10–50 ppm under UV irradiation. The response of the sensor to different relative humidity and other possible interferents such as ammonia, methanol and alcohol was investigated. The larger response of the sensor to formaldehyde relative to these interferents is suggested to be due to the deeper diffusion of formaldehyde into the TiO₂ nanotubes.     

TiO2 nanotube arrays annealed in CO exhibiting high performance for lithium ion intercalation

Anatase titania nanotube arrays were fabricated by means of anodization of Ti foil and annealed at 400 °C in respective CO and N₂ gases for 3 h. Electrochemical impendence spectroscopy study showed that CO annealed arrays possessed a noticeably lower charge-transfer resistance as compared with arrays annealed in N₂ gas under otherwise the same conditions. TiO₂ nanotube arrays annealed in CO possessed much improved lithium ion intercalation capacity and rate capability than N₂ annealed samples. At a high charge/discharge current density of 320 mA g⁻¹, the initial discharge capacity in CO annealed arrays was found to be as high as 223 mAh g⁻¹, 30% higher than N₂ annealed arrays, ∼164 mAh g⁻¹. After 50 charge/discharge cycles, the discharge capacity in CO annealed arrays remained at ∼179 mAh g⁻¹. The improved intercalation capacity and rate capability could be attributed to the presence of surface defects like Ti-C species and Ti³⁺ groups with oxygen vacancies, which not only improved the charge-transfer conductivity of the arrays but also possibly promoted phase transition.     

A pH sensor based on the TiO2 nanotube array modified Ti electrode

In this paper, a novel solid state pH sensor was fabricated by anodization of titanium substrate electrode. The relationship between pH sensitivity and hydrophilicity or surface morphology of TiO₂ film was investigated. Amorphous TiO₂ nanotube has better pH response than anatase TiO₂ nanotube. After being irradiated by ultraviolet light (UV), the potential response of the electrode modified by amorphous TiO₂ nanotube was close to Nernst equation (59 mV/pH). SEM, XRD, and XPS were used to characterize electrodes. Possible mechanism was discussed by analyzing surface hydroxyl groups, crystal structure and hydrophilicity of the electrodes. The electrode has been used to detect some kinds of soft drinks and shows good response.     

Photoelectrocatalytic properties of Ag nanoparticles loaded TiO2 nanotube arrays prepared by pulse current deposition

A pulse current deposition technique was adopted to construct highly dispersed Ag nanoparticles on TiO₂ nanotube arrays which were prepared by the electrochemical anodization. The morphology, crystallinity, elemental composition, and UV-vis absorption of Ag/TiO₂ nanotube arrays were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). In particular, the photoelectrochemical properties and photoelectrocatalytic activity under UV light irradiation and the photocatalytic activity under visible light irradiation for newly synthesized Ag/TiO₂ nanotube arrays were investigated. The maximum incident photon to charge carrier efficiency (IPCE) value of Ag/TiO₂ nanotube arrays was 51%, much higher than that of pure TiO₂ nanotube arrays. Ag/TiO₂ nanotube arrays exhibited higher photocatalytic activities than the pure TiO₂ nanotube arrays under both UV and visible light irradiation. The photoelectrocatalytic activity of Ag/TiO₂ nanotube arrays under UV light irradiation was 1.6-fold enhancement compared with pure TiO₂ nanotube arrays. This approach can be used in synthesizing various metal-loaded nanotube arrays materials.     

Effect of TiO2 nanotubes with TiCl4 treatment on the photoelectrode of dye-sensitized solar cells

In this study, we used the electrochemical anodization to prepare TiO₂ nanotube arrays and applied them on the photoelectrode of dye-sensitized solar cells. In the field emission scanning electron microscopy analysis, the lengths of TiO₂ nanotube arrays prepared by electrochemical anodization can be obtained with approximately 10 to 30 μm. After titanium tetrachloride (TiCl₄) treatment, the walls of TiO₂ nanotubes were coated with TiO₂ nanoparticles. XRD patterns showed that the oxygen-annealed TiO₂ nanotubes have a better anatase phase. The conversion efficiency with different lengths of TiO₂ nanotube photoelectrodes is 3.21%, 4.35%, and 4.34% with 10, 20, and 30 μm, respectively. After TiCl₄ treatment, the efficiency of TiO₂ nanotube photoelectrode for dye-sensitized solar cell can be improved up to 6.58%. In the analysis of electrochemical impedance spectroscopy, the value of R_k (charge transfer resistance related to recombination of electrons) decreases from 26.1 to 17.4 Ω when TiO₂ nanotubes were treated with TiCl₄. These results indicate that TiO₂ nanotubes treated with TiCl₄ can increase the surface area of TiO₂ nanotubes, resulting in the increase of dye adsorption and have great help for the increase of the conversion efficiency of DSSCs.     

Large-diameter titanium dioxide nanotube arrays as a scattering layer for high-efficiency dye-sensitized solar cell

Large-sized titanium dioxide (TiO₂) nanotube arrays with an outer diameter of approximately 500 nm have been successfully synthesized by potentiostatic anodization at 180 V in a used electrolyte with the addition of 1.5 M lactic acid. It is found that the synthesized large-diameter TiO₂ nanotube array shows a superior light scattering ability, which can be used as a light scattering layer to significantly enhance the efficiency of TiO₂ nanoparticle-based dye-sensitized solar cells from 5.18% to 6.15%. The remarkable light scattering ability makes the large-diameter TiO₂ nanotube array a promising candidate for light management in dye-sensitized solar cells (DSSCs).     

Control of morphology and composition of self-organized zirconium titanate nanotubes formed in (NH4)2SO4/NH4F electrolytes

We investigated the formation of self-organized zirconium titanate nanotubes by anodizing a Ti-35Zr alloy in 1 M (NH₄)₂SO₄ + 0.1-2.0 wt.% NH₄F electrolytes. The morphology and composition of the zirconium titanate nanotube are controlled by the applied electrochemical conditions. The outer diameter of nanotubes is controlled by the anodization potential in the range between 1 and 100 V (versus Ag/AgCl). Tubes with diameters from 14 to 470 nm can be grown. The nanotube length correlates with the anodic charge up to a length where significant dissolution of the nanotube layer is observed. The wall thickness, composition of the nanotubes and porosity of the nanotube layer are significantly affected by the fluoride ion concentration. The length limiting factor of the nanotube growth is found to be the diffusion of ionic species in the electrolyte.     

Fabrication of high aspect ratio and open‐ended TiO2 nanotube photocatalytic arrays through electrochemical anodization

Well‐aligned, high aspect‐ratio and open‐ended TiO₂ nanotube arrays secured within a Ti foil (TiO₂ nanotubes cartridge) were successfully prepared through the double‐sided anodization method. With ～210 µm of nanotube length, the anodic growth of TiO₂ was accelerated and stabilized by the lactic acid‐containing ethylene glycol electrolyte. In the absence of lactic acid, the anodization led to detachment of nanotubes from the Ti foil after 5–6 h of high voltage (80 V) anodization. Transmission electron microscope image and Raman spectrum revealed that the as‐anodized TiO₂ nanotube arrays without annealing treatment were partially crystalline anatase and demonstrated photocatalytic activity in the mineralization of formic acid. © 2015 American Institute of Chemical Engineers AIChE J, 62: 415–420, 2016     

Fabrication of nanoporous TiO2 by electrochemical anodization

The formation of self-organized porous titania is achieved by electrochemical anodization under a potentiostatic regime. Anodic titanium oxide (ATO) was fabricated by a three-step self-organized anodization of the Ti foil in an ethylene glycol electrolyte containing 0.38 wt% of NH₄F and 1.79 wt% of H₂O. Anodizing was carried out at the constant cell potential ranging from 30 to 70 V at the temperature of 20 °C. It was found that nanoporous TiO₂ arrays can be obtain only after a short duration of the third step (10 min). The influence of anodizing potential on the structural parameters of porous anodic titania including pore diameter, interpore distance, wall thickness, porosity and pore density was extensively studied. The linear dependencies between interpore distance, pore diameter and wall thickness upon the anodizing potential were found. The regularity of pore arrangement was monitored qualitatively by fast Fourier transforms (FFTs) of top-view FE-SEM images. It was found that the best arrangement of nanopores is observed at 40 V. This finding was confirmed by the analysis of pore circularity. The highest circularity of pores was observed once again at 40 V.     

Formation mechanism and packing options in tubular anodic titania films

Titania nanotube arrays were synthesized via anodic oxidation of titanium foils in glycerol electrolyte containing NH₄F at anodization voltage ranging from 10 V to 30 V. The structural parameters of self-organized periodic arrays of titania nanotubes were determined by small-angle neutron scattering and scanning electron microscopy techniques. Transmission electron microscopy and electron diffraction studies of single-standing nanotubes revealed the presence of nanocrystalline titanium oxide phases with oxidation states lower than +4 (TiO, Ti₂O₃). Several assumptions on growth and self-organization mechanism of nanotube arrays have been made.     

Enhanced inactivation of E. coli bacteria using immobilized porous TiO2 photoelectrocatalysis

Immobilized TiO₂ nanotube electrodes with high surface areas were grown via electrochemical anodization in aqueous solution containing fluoride ions for photocatalysis applications. The photoelectrochemical properties of the grown immobilized TiO₂ film were studied by potentiodynamic measurements (linear sweep voltammetry), in addition to the calculation of the photocurrent response. The nanotube electrode properties were compared to mesoporous TiO₂ electrodes grown by anodization in sulfuric acid at high potentials (above the microsparking potential) and to 1 g/l P-25 TiO₂ powder. Photocatalyst films were evaluated by high resolution SEM and XRD for surface and crystallographic characterization. Finally, photoelectrocatalytic application of TiO₂ was studied via inactivation of E. coli. The use of the high surface area TiO₂ nanotubes resulted in a high photocurrent and an extremely rapid E. coli inactivation rate of ∼10⁶ CFU/ml bacteria within 10 min. The immobilized nanotube system is proven to be the most potent electrode for water purification.     

Highly active and selective Cu/SiO2 catalysts prepared by the urea hydrolysis method in dimethyl oxalate hydrogenation

Cu/SiO₂ catalysts have been successfully prepared via urea hydrolysis method. The catalysts have been systematically characterized by X-ray diffraction, high-resolution transmission electron microscopy, N₂-physisorption and H₂ temperature-programmed reduction. The results demonstrated the presence of copper nanoparticles and their high dispersion on the SiO₂ support. Catalysts with different copper loadings were prepared, and their performances in the hydrogenation of dimethyl oxalate to ethylene glycol were studied. A 100% conversion of dimethyl oxalate and maximum 98% selectivity of ethylene glycol were reached with 15.6 wt.% copper loading at 200 °C and 2 MPa. Furthermore, under the same reaction conditions, the catalyst can maintain the selectivity of 90% when the reduction temperature reduced from 350 °C to 200 °C. The high activity and selectivity over the catalyst may be ascribed to the homogenously distribution of copper nanoparticles on the large surface.     

An investigation on room temperature synthesis of vertically oriented arrays of iron oxide nanotubes by anodization of iron

Formation of iron oxide nanotubes on to pure iron substrate by an electrochemical anodization method was investigated in fluoride containing electrolytes. Anodization of iron foil in fluoride containing borate solution resulted in stacked nano-ring type oxide morphology. Nanoporous oxide layer was observed at low pH and a granular oxide layer was formed at higher pH of phosphate + fluoride solutions. Formation of either nanoporous or nanotubular oxide layer was observed in ethylene glycol (EG) solution containing 0.05-0.1 M fluoride + 1.5-3.0 vol.% water. Transition from nanoporous structure to nanotubular structure was critically controlled by anodization potential, water addition and fluoride concentration of the EG solution. The potential required for this transition decreased with increase in the water content up to 7 vol.% beyond which enhanced dissolution occurred. Annealing of the nanotubes at 500 °C resulted in predominantly α-Fe₂O₃ crystal structure. The annealed Fe₂O₃ samples consisting of a single layer of nanotubular structure showed a photo current density of 0.4 mA/cm² at 0.5 V Ag/AgCl in 1 M KOH solution under simulated solar light illumination.