共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
智能配电网通信组网技术研究及应用 总被引:2,自引:0,他引:2
对智能电网环节中的配电、用电的通信组网技术进行了综合论述。主要内容包括智能配用电网概述、电力通信骨干网以及接入层的通信要求、配电自动化通信规约、EPON组网技术、宽带电力线通信(BPLC)组网以及基于TD-LTE技术的电力无线宽带系统。对智能配用电业务需求作了相应阐述,为智能配电通信组网方案提出技术指导。针对配用电网架复杂、节点数量多而分散、业务种类复杂的数据传输业务需求,提出以光纤通信为骨干接入,以无线宽带、无源光通信为全域覆盖,以低压电力特种光电复合缆、电力线通信、短距离无线通信为主要末端接入的配用电一体化综合通信解决方案。为坚强统一智能电网配用电侧的发展提供高效、安全、实时双向的通信支撑,为智能电网通信规划设计提供参考。 相似文献
4.
基于TD-LTE的智能配电网终端通信技术研究 总被引:1,自引:0,他引:1
文章介绍了几种常用的配电终端,分析了目前配电网终端常用的几种通信技术的优缺点,如电力线载波通信、光纤通信、GPRS、3G等;根据智能配电网的发展趋势,提出了一种集成式的智能配电终端和一种新型的通信技术,即时分长期演进技术满足智能电网建设的需求. 相似文献
5.
6.
7.
8.
正智能电网是国内外电网技术发展的必然趋势,已成为各国电网技术研究的重要内容,而智能配电网络的建设是关键环节。从我国智能配电网的现状及需求来看,目前主要问题在于通信接入层部分的网络建设。介绍了利用未来无线通信技术分时长期演进(TD-LTE,Time Division Long Term Evolution)网络技术建设智能配电网络及使用无线通信建设智能电网的关键技术,分析了TD-LTE 相似文献
9.
电力线通信(Power Line Communication)简称PLC,是一种利用电力线实现高速信息传输的技术。利用PLC技术可以实现互联网访问、远程抄表、配网自动化、家政自动化、保安监控等服务。文章主要介绍现代通信技术在智能电网中的应用,讨论如何将电力线通信技术应用于智能电网(smart grid)能源管理系统和大规模自动化控制系统中。 相似文献
10.
面向智能电网中低压通信接入网应依托骨干通信网和中低压电力线路资源,在各级供电公司建设以电力光纤通信为主,中低压电力线载波为辅,无线公网等其他方式为补充和延伸的网络.文章论述了作为中低压通信接入网光纤接入的两种主流PON技术(EPON和GPON)的主要特点,通过在传输速率、ODN等级、协议、制定标准、承载业务以及目前对应产品的角度等方面对两种技术进行对比分析,得出EPON技术由于其成本较低且技术成熟,近年来在智能电网通信领域将得到广泛应用;而具有更高标准化程度的GPON技术,随着商品化技术的成熟,将在未来发挥更大的作用. 相似文献
11.
12.
电站锅炉停用保护剂多采用十八胺和表面活性胺。对这2种停用保护剂进行了应用效果对比研究,即对湿冷机组、空冷机组采用十八胺或表面活性胺、有无凝结水精处理系统等6台机组停机和启动过程中给水、主蒸汽和凝结水的氢电导率变化情况进行分析。研究结果表明:在停机过程和启动过程,2种保护剂均会在水汽系统中发生部分分解,导致水汽系统的氢电导率显著升高;表面活性胺和十八胺比较,使用前者,机组启停机过程可保持凝结水精处理系统正常投运,因而可使水汽质量迅速达标,对机组安全运行有利,因此推荐采用表面活性胺作为锅炉停用保护剂。 相似文献
13.
14.
特高压线路工频参数测试干扰分析是选择适合工频参数测试方法及测试结果分析的重要基础。测试了1 000 kV皖南-浙北特高压线路正序和零序参数测试期间的干扰电压信号,分析了其频谱特征;在此基础上,通过与正序参数仿真计算值的对比分析了正序参数实际测试偏差。结果表明:皖南-浙北特高压同塔双回线路工频参数测试期间,干扰电压存在“三相不平衡性及时变性”的特点;工频法和异频法2种不同方法得到的线路参数测试结果存在一定差异;干扰电压“时变”时,线路工频参数测试宜采用异频法。 相似文献
15.
《国外电子测量技术》2014,(10)
正Qingdao,China7.16-19,2015The International Conference on Electronic MeasurementInstruments(ICEMI)is the world’s premier conference dedicated to the electronic measurement and test of devices,boards and systems that is covering the complete cycle from design,verification,test,diagnosis,failure analysis and process of manufactory and products 相似文献
16.
17.
《国外电子测量技术》2014,(9)
正Qingdao,China7.16-19,2015The International Conference on Electronic MeasurementInstruments(ICEMI)is the world's premier conference dedicated to the electronic measurement and test of devices,boards and systems that is covering the complete cycle from design,verification,test,diagnosis,failure analysis and process of manufactory and products 相似文献
18.
Cuba’s electric sector is approaching an inflection point. Although the country has historically relied upon non-commercial barter agreements for imported oil to meet its electric demand, a combination of factors including reducing imports, increasing demand, and ambitious climate change goals suggest new pathways forward may be warranted. The way Cuba responds to near- and long-term challenges will help set the stage for its energy future. This article describes Cuba's electric sector and provides a set of key recommendations to consider going forward. 相似文献
19.
S. Y. Wu B. N. Tran F. Y. Davis C. L. Trent D. L. Edberg W. A. Geideman 《Integrated ferroelectrics》2013,141(3):281-291
Abstract Smart materials of lead-zirconate-titanate (PZT) piezoelectric ceramics have attracted attention in recent years for active vibration control, acoustic noise suppression, health monitoring and damage assessment. We at McDonnell Douglas Aerospace have been studying these ceramics for use as sensors and actuators in various space and aircraft structures. In this paper, we will report results of a recent study on active vibration control using monomorph PZT actuators. The experiments were performed on thin aluminum cantilever beams. Collocated and non-collocated sensors and actuators were employed. Two control techniques: the classical velocity feedback and adaptive feedback controls, were investigated. We have obtained significant damping and broadband vibration attenuation of greater than 30 dB using the classical control with the single-input single-output feedback approach. A 24 dB reduction has also been achieved using the adaptive control with the multiple-input single-output approach. Detailed experimental methods and results will be described. 相似文献
20.
介绍了550 kV SF6气体绝缘金属封闭式组合电器(GIS)高海拔套管的绝缘屏蔽结构参数对电场分布的影响。针对套管单屏蔽结构方案,通过有限元法研究了接地屏蔽层翻边结构参数组合对套管内部最大电场强度的影响;研究了接地屏蔽层高度对GIS套管内外绝缘电场强度分布的影响。从而通过最优化接地屏蔽层高度和接地屏蔽层翻边结构参数组合,得到合理的套管内外电场分布,有效解决了高海拔型套管外绝缘修正后的内外电场分布均匀化问题,为550 kV SF6气体绝缘高海拔套管的绝缘结构设计提供了理论依据。 相似文献