Compact ultra‐wideband slot antenna with three notched‐band characteristics

A very compact ultra‐wideband (UWB) slot antenna with three L‐shaped slots for notched‐band characteristics is presented in this article. The antenna is designed and fabricated using a new stepped slot with different size, integrated in the ground plane, and excited by a 50 Ω microstrip transmission line. The stepped slot is used to minimize the dimensions of the antenna and to achieve an impedance bandwidth between 2.65 and 11.05 GHz with voltage standing wave ratio (VSWR) less than 2. The length of the stepped slot is equal to a quarter wavelength to create a resonance in the desired frequency. Three L‐shaped slots with various sizes are etched in the ground plane to reject three frequency bands in C‐band (3.7‐4.2 GHz), WLAN (5.15‐5.825 GHz), and X‐band (7.25‐7.75 GHz), respectively. The notched‐band frequency can be controlled by changing the length of the L‐shaped slot. The proposed antenna has a very small size (20.25 × 8 × 1.27 mm³) compared with previous works. The measured and simulated results show a good agreement in terms of radiation pattern and impedance matching.     

Broadband compact CPW‐fed metasurface antenna for SAR‐based portable imaging system

A broadband and compact coplanar waveguide (CPW) coupled‐fed metasurface (MS)‐based antenna for C‐band synthetic aperture radar (SAR) imaging application is proposed in this article, which is consisted of 16 uniform periodic square patches performed as radiators. The CPW feeding structure gives two following functions: (1) It excites an aperture coupling slot structure underneath the center of MS patch array. (2) It acts as a ground plane for the metasurface patch units. Different slots were investigated and eventually an hourglass‐shaped slot is applied to enhance bandwidth for imaging applications. A prototype with a dimension of 60 × 60 × 1.524 mm³ (1.1λ₀ × 1.1λ₀ × 0.03λ₀) operating at the center frequency 5.5 GHz (f₀) has been fabricated and measured to verify the design principle. This antenna has a measured impedance bandwidth of 12.4% from 5.14 to 5.82 GHz, a peak gain of 9.2 dBi and averaged gain of 7.2 dBi at broadside radiation. Microwave imaging experiments using the proposed antenna have been carried out and a good performance is achieved.     

Compact UWB flexible elliptical CPW‐fed antenna with triple notch bands for wireless communications

A coplanar waveguide (CPW)‐fed flexible elliptical antenna with triple band notched characteristics is presented in this article. The designed antenna consists of an elliptical patch and slots incorporated CPW feed line to cover the bandwidth requirements for ultra‐wideband (UWB) applications. The designed UWB antenna has a fractional bandwidth of about 166.19% (1.20‐13 GHz) with a center frequency of 7.1 GHz in simulation and about 170.10% (1.05‐13 GHz) with a center frequency of 7.025 GHz in measurement. The overall dimension of the proposed flexible antenna is 45 × 35 × 0.6 mm³. The triple notched bands are realized by designing with circular shaped split‐ring‐resonators (SRRs) and defected ground structure (DGS). According to the measurement, first notched band (2.0? 2.70 GHz) is generated for rejecting 2.4 GHz WLAN by introducing a single circular ST‐SRR on the radiating patch. The second notch (3.45‐3.80 GHz) is obtained by embedding another circular ST‐SRR on the patch to mitigate the interference of 3.5 GHz Wi‐MAX system. Finally, due to presence of DGS, third notch (5.15‐6.20 GHz) is produced which suppresses the interference from 5.5 GHz Wi‐MAX and 5.2/5.8 GHz WLAN systems. The proposed antenna offers excellent performance in different flexible conditions that confirm its applicability on curved surfaces for UWB systems.     

Metamaterial inspired CPW‐fed compact antenna for ultrawide band applications

A small size, planar and co‐planar waveguide fed metamaterial inspired antenna is proposed for ultra‐wideband (UWB) application. The main radiating element consists of three split‐ring resonators (SRR) and placed along one axis. Moreover, coplanar waveguide (CPW)‐fed line along with modified ground plane is used to improve the impedance matching. The physical size of proposed antenna is 25(W) × 22 (L) × 1.6 (H) mm³. The CPW‐fed metamaterial inspired antenna provides bandwidth of 10.4 GHz from 3.1 to 13.5 GHz based on the 3:1 (voltage standing wave ratio [VSWR] <2). Over the range of UWB frequency, peak realized gain varies from 2.5 to 4 dBi. The proposed antenna provides omnidrectional radiation patterns. Further, fidelity factor of the proposed antenna is also calculated and measured. The calculated fidelity factor is suitable for UWB applications. Finally, prototype of the antenna is developed and tested using network analyzer. The simulated and measured results are in good agreement.     

A wideband compact antenna with quad‐circular polarized bands in its operating regions

This article presents the design of an offset CPW‐fed slot antenna which exhibits a narrow impedance bandwidth (IBW; |S₁₁| ≤ ?10 dB) extending from 1.20 GHz to 1.45 GHz and another wide impedance bandwidth from 1.86 GHz to 8.4 GHz thus covering almost all the conventional operating frequencies. The antenna is loaded with semicircular and rectangular stubs and meandered microstrip lines to realize circular polarization at 1.35 GHz, 3.3 GHz, 4.9 GHz, and 7.5 GHz with axial ratio bandwidth (axial ratio ≤ 3 dB) of 19.25% (1.2‐1.46 GHz), 4.24% (3.24‐3.38 GHz), 4.1%(4.8‐5 GHz), and 5.2% (7.3‐7.69 GHz) respectively thus covering the GPS, WiMAX, WLAN, and X‐band downlink satellite communication application bands. The mechanism of generation of CP is discussed using vector analysis of surface current density distribution. The gain is fairly constant in the wide IBW region with maximum fluctuation of 1.2 dB. The structure is compact with an overall layout area of 0.27λ × 0.27λ, where λ is the free‐space wavelength corresponding to the lowest circular polarized (CP) frequency. A comparison of the proposed antenna with previously reported structures is performed with respect to impedance bandwidth, compactness, number of CP bands, LHCP to RHCP isolation and gain to comprehend the novelty of the proposed design. A prototype of the proposed antenna is fabricated and the measured results are in accord with the simulated results.     

Dual‐band dual‐polarized compact planar monopole antenna for wide axial ratio bandwidth application

In this article, a geometrically simple, microstrip line‐fed planar monopole structure with slanting edge ground plane is designed to realize the dual‐band dual‐polarized operation. The proposed antenna consists of a rotated U‐shaped patch and an electromagnetically coupled L‐shaped parasitic radiating element. Owing to the combination of microstrip line‐fed radiating patch and a slanting‐edge rectangular ground plane on the opposite side of the substrate, the proposed dual‐band antenna can generate broad axial ratio bandwidth (ARBW) in the upper frequency band. The overall dimension of the prototype is only 32 × 32 × 1.6 mm³. The measured results validate that the proposed antenna has two operational frequency bands, 29.84% (1.54‐2.08 GHz) for linearly polarized radiation and 71.85% (3.96‐8.4 GHz) for circularly polarized radiation. Measured result shows that 3‐dB ARBW of the proposed antenna is 73.54% (3.80‐8.22 GHz) in the higher frequency band. It shows that the higher frequency band exhibits a left‐hand circularly polarized radiation in the boresight direction.     

A vertex‐fed hexa‐band frequency reconfigurable antenna for wireless applications

Present article embodies the design and analysis of an octagonal shaped split ring resonator based multiband antenna fed at vertex for wireless applications with frequency‐band reconfigurable characteristics. The proposed antenna is printed on FR4 substrate with electrical dimension of 0.4884 λ × 0.4329 λ × 0.0178 λ (44 × 39 × 1.6 mm³), at lower frequency of 3.33 GHz. The antenna consists of SRR based vertex fed octagonal ring as the radiation element and switchable reclined L‐shaped slotted ground plane. Antenna achieves six bands for wireless standards viz: upper WLAN (5.0/5.8 GHz), lower WiMAX (3.3 GHz), super extended C‐band (6.6 GHz), middle X band (9.9 GHz—for space communication), and lower K_U band (15.9 GHz—for satellite communication systems operating band). Stable radiation patterns are observed for the operating bands with low cross polarization. The proposed design achieves hexa band characteristics during switching ON state of PIN diode located at reclined L‐shaped slot in the ground plane. Experimental characteristic of antenna shows close agreement with those obtained by simulation of the proposed antenna.     

A broadband circularly polarized monopole antenna

A compact modified C‐shaped monopole antenna with broadband circular polarization is proposed, fabricated and measured. The antenna structure is simple and only consists of combined modified C‐shaped radiation patch and an improved ground plane with the overall size of 25 × 25 × 1 mm³. By cutting the corner on the modified C‐shaped patch and adding triangular stubs on the ground plane, the wide impedance bandwidth and axial ratio bandwidth are achieved. The design process of the antenna is given, and the circular polarization mechanism of the circularly polarized antenna is analyzed from the surface current distributions. The measured impedance bandwidth is 95.2% (4.4‐12.4 GHz) with return loss better than 10 dB, and the measured 3 dB axial ratio bandwidth is 96.8% (4.42‐12.72 GHz). The peak gain is above 3.0 dBi within the working band, which indicates that it is suitable for application of ultra‐wideband (UWB) wireless communication systems and satellite communication systems.     

Coplanar waveguide‐fed electrically small dual‐polarized short‐ended zeroth‐order resonating antenna using Ω‐shaped capacitor and single‐split ring resonator for GPS/WiMAX/WLAN/C‐band applications

This work explains the design and analysis of a triple‐band electrically small (ka = 0.56 < 1) zeroth‐order resonating (ZOR) antenna with wideband circular polarization (CP) characteristics. The antenna compactness is obtained due to ZOR frequency of composite right/left‐handed (CRLH) transmission line (TL) and wideband CP radiation are achieved due to the introduction of single‐split ring resonator and asymmetric coplanar waveguide fed ground plane. The proposed antenna obtains an overall electrical size including the ground plane of 0.124 λ₀ × 0.131 λ₀ × 0.005 λ₀ at 1.58 GHz and physical dimension of 23.7 × 25 × 1 mm³ are achieved. The antenna provides a size reduction of 44.95% compared to a conventional monopole antenna. The novelty behind the ohm‐shaped capacitor is the generation of extra miniaturization with better antenna compactness. The antenna provides dual‐polarized radiation pattern with linear polarization radiation at 1.58 and 3.54 GHz, wideband CP radiation at 5.8 GHz. The antenna measured results shows good impedance bandwidth of 5%, 6.21%, and 57.5% for the three bands centered at 1.58, 3.54, and 5.8 GHz with a wider axial ratio bandwidth (ARBW) of 25.47% is obtained in the third band. The antenna provides a higher level of compactness, wider ARBW, good radiation efficiency, and wider S₁₁ bandwidth. Hence, the proposed antenna is suitable for use in GPS L1 band (1.565‐1.585 GHz), WiMAX 3.5 GHz (3.4‐3.8 GHz) GHz, WLAN 5.2/5.8 GHz (5.15‐5.825 GHz), and C‐band (4‐8 GHz) wireless application systems.     

Dual‐band and enhanced‐isolation MIMO antenna with L‐shaped meta‐rim extended ground stubs for 5G mobile handsets

A novel compact planar dual‐band multiple input multiple output (MIMO) antenna with four radiating elements for 5G mobile communication is proposed. Each radiating element has a planar folded monopole, which is surrounded by L‐shaped meta‐rim extended ground stubs. The compact folded arms act as the main radiating elements, while combined with the L‐shaped meta‐rim stubs, the proposed antenna forms multiple resonances so as to achieve dual‐band coverage. The simulated and measured results show that the proposed antenna has two wide bands of ?6 dB return loss, consisting of 1.6 to 3.6 and 4.1 to 6.1 GHz, respectively. Without any additional isolation structure between the elements, the isolation for the proposed 2 × 2 MIMO antenna in both desired bands can be achieved better than 12 dB. The measured results show that the proposed MIMO antenna with good performance, that is, stable radiation patterns, high efficiencies, low specific absorption ratio (SAR) to human tissues, is suitable for WLAN/LTE, 4G and future 5G mobile phone applications.     

A coplanar‐waveguide‐fed planar integrated cavity backed slotted antenna array using TE33 mode

This short communication presents a substrate integrated waveguide planar cavity slotted antenna array. The proposed antenna array, excited in its TE₃₃ higher mode, incorporates a grounded coplanar‐waveguide (CPW) CPW‐feeding excitation mechanism. The electromagnetic energy is coupled to the air through 3 × 3 slot array etched on top metallic layer. The proposed antenna operates in the X‐band for the frequency range around the 10 to 11 GHz with resonances at 10.4 and 10.8 GHz frequencies. The proposed antenna array was fabricated and tested. Experimental results show good impedance matching with enhanced radiation characteristics, in terms of peak gain, cross‐polarization level, and low back‐radiation. The proposed antenna has the advantages of low‐footprints, lightweight, high gain, low‐cost, and ease of integration with other electronic circuits. With these characteristics, the proposed antenna array can find its applications in compact wireless digital transceivers.     

Design and development of enhanced bandwidth multi‐frequency slotted antenna for 4G‐LTE/WiMAX/WLAN and S/C/X‐band applications

A multi‐frequency rectangular slot antenna for 4G‐LTE/WiMAX/WLAN and S/C/X‐bands applications is presented. The proposed antenna is comprised of rectangular slot, a pair of E‐shaped stubs, and an inverted T‐shaped stub and excited using staircase feed line. These employed structures help to achieve multiband resonance at four different frequency bands. The proposed multiband slot antenna is simulated, fabricated and tested experimentally. The experimental results show that the antenna resonates at 2.24, 4.2, 5.25, and 9.3 GHz with impedance bandwidth of 640 MHz (2.17‐2.82 GHz) covering WiMAX (802.16e), Space to Earth communications, 4G‐LTE, IEEE 802.11b/g WLAN systems defined for S‐band applications. Also the proposed antenna exhibits bandwidth of 280 MHz (4.1‐4.38 GHz) for Aeronautical and Radio navigation applications, 80 MHz (4.2‐4.28 GHz) for uncoordinated indoor systems,1060 MHz (5.04‐6.1 GHz) for the IEEE 802.11a WLAN system defined for C‐band applications and 2380 MHz (7.9‐10.28 GHz) defined for X‐band applications. Further, the radiation patterns for the designed antenna are measured in anechoic chamber and are found to agree well with simulated results.     

A metamaterial hepta‐band antenna for wireless applications with specific absorption rate reduction

Present article embodies the design and analysis of slotted circular shape metamaterial loaded multiband antenna for wireless applications with declination of SAR. The electrical dimension is 0.260 λ × 0.253 λ × 0.0059 λ (35 × 34 × 0.8 mm³) of proposed design, at lower frequency of 2.23 GHz. The antenna consists of circular shape rectangular slot as the radiation element loaded with metamaterial split ring resonator (SRR) and two parallel rectangular stubs, etched rectangular single complementary split‐ring resonator (CSRR) and reclined T‐shaped slot as ground plane. Antenna achieves hepta bands for wireless standards WLAN (2.4/5.0/5.8 GHz), WiMAX (3.5 GHz), radio frequency identification (RFID) services (3.0 GHz), Upper X band (11.8 GHz—for space communication) and Lower K_U band (13.1 GHz—for satellite communication systems operating band). Stable radiation patterns are observed for the operating bands with low cross polarization. The SRR is responsible for creating an additional resonating mode for wireless application as well as provide the declination in SAR about 13.3%. Experimental characteristic of antenna shows close agreement with those obtained by simulation of the proposed antenna.     

A compact broadband coplanar waveguide fed circularly polarized printed monopole antenna with asymmetric modified ground plane

In this communication, a broadband circularly polarized (CP) monopole antenna with coplanar waveguide (CPW) feeding is proposed. It consists of a modified rectangular monopole, an asymmetric ground plane, a two‐linked inverted L‐shaped strips on the left CPW ground, and two rectangular horizontal slots in asymmetric CPW ground plane. The overall dimension is only 0.47λ _o × 0.47λ _o. The antenna prototype has been fabricated. The measured results indicate that a broad ?10 dB impedance bandwidth (IBW) of 107.5% (4.3 GHz, 1.85‐6.15 GHz) and a broad 3 dB axial ratio ARBW of 104.3% (4 GHz, 1.855‐5.9 GHz) can be achieved; the average realized gain is 2.3 dBi for the entire CP band. The proposed antenna is an attractive candidate for several wireless communication systems.     

Quasi‐corrugated substrate integrated waveguide H‐plane horn antenna with wideband and low‐profile characteristics

A wideband H‐plane horn antenna based on quasi‐corrugated substrate integrated waveguide (SIW) technology with a very low profile is presented in this article. Open‐circuited microstrip stubs are applied to create electric sidewalls of the quasi‐corrugated SIW structure. The quasi‐corrugated SIW H‐plane horn antenna shows high performance and simple structure. A specify‐shaped horn aperture is utilized, so that the poor impedance matching owing to the structure restriction can be smoothened. The structure is simulated by ANSYS HFSS and a prototype is fabricated. The measured results match well with the simulated ones. An enhanced impedance bandwidth ranging from 5.3 GHz to 19 GHz (VSWR < 2.5) is achieved. The presented antenna also brings out stable radiation beam over the same frequency band.     

A broadband slant polarized cavity backed microstrip‐fed wide‐slot antenna array

This article deals with the design of a broadband cavity‐backed microstrip‐fed wide‐slot antenna array for L‐band applications. For verification purpose, a sample 1 × 4‐element antenna array has been designed, manufactured and tested. Experimental results have shown satisfactory agreement with the simulation. The proposed antenna array exhibits a measured impedance bandwidth of 1.4 GHz (90%) with frequency of 0.85 to 2.25 GHz and the gain is higher than 11 dBi. The designed antenna has small size and low weight and can be fabricated using a low‐cost fabrication process for easy integration with RF circuits and microwave components. This work is useful for some radar applications and radio frequency identification systems.     

Metamaterial‐inspired miniaturized antenna loaded with IDC and meander line inductor using partial ground plane

In this article, a novel omnidirectional compact dual band metamaterial‐inspired antenna with CPW feed has been proposed for application of GSM 1800 (1.71‐1.785 GHz/1.805‐1.879 GHz), GSM 1900 (1.85‐1.91 GHz/1.93‐1.99 GHz), UMTS (1.92‐2.17 GHz), WLAN/Wi Fi (4.9, 5, 5.9 GHz), HiperLAN1 (5.15‐5.3 GHz), and HiperLAN2 (5.47‐5.72 GHz) using a combination of meander line inductor and interdigital capacitor (IDC). The antenna consists of complimentary right/left handed (CRLH) transmission line on both sides of patch to excite zeroth order mode (n = 0). The rectangular slotted stubs act as a virtual ground for the structure using a short circuit condition at the end of the IDC. The zeroth order resonance (ZOR) frequency is mainly controlled by IDC and partially with the meander line inductor. The designed antenna operates from 1.72 to 2.22 GHz and 4.25 to 5.88 GHz with radiating size of 0.56λ_o × 0.35λ_o (32 × 20 mm²), where λ_o is the free‐space wavelength at ZOR frequency of 5.27 GHz. The proposed antenna offers measured impedance bandwidth (|S₁₁| <?10 dB) of 25.3 and 18.7% at 1.95 and 5.28 GHz and covers the targeted frequency bands. The proposed structure offers omnidirectional radiation patterns are congruous throughout the working band.     

Epsilon‐shaped circularly polarized strip and slot‐loaded ultra‐wideband antenna for Ku‐band and K‐band

A compact epsilon‐shaped (ε) ultra‐wideband (UWB) antenna for dual‐wideband circularly polarized (CP) applications has been investigated in this article. It consists of a stepped stub loaded modified annular ring‐shaped radiator and modified CPW ground plane. The ground plane is loaded with two semicircular notches and a spiral‐shaped slot. The impedance bandwidth (IBW) is 97.02% (10.4‐30 GHz) along with an overall footprint of 20 × 20 mm². The fractional axial ratio bandwidth (3‐dB ARBW) for two wide bands is 38.50% (13.30‐19.64 GHz) and 6.45% (26.25‐28.00 GHz), respectively. The proposed antenna is left‐hand circularly polarized with a peak gain of about 5.09 and 5.14 dB in both 3‐dB ARBW bands. The proposed antenna is dominating other reported CP antenna structures in terms of number of CP bands, 3‐dB ARBW, IBW, peak gain, and dimensions.     

Novel dual‐band asymmetric U‐shaped slot antenna for dual‐circular polarization

A novel dual‐band, dual‐circularly polarized antenna is proposed and fabricated. The proposed antenna consists of an asymmetric U‐shaped slot and an inverted L‐shaped slot which are designed to excite two orthogonal E vectors with equal amplitude and 90° phase difference (PD), in addition, fed by a coplanar waveguide (CPW) Furthermore, a left‐hand circular polarization in the direction of z > 0 and a right‐hand circular polarization instead of the opposite direction both at the lower and upper bands are exhibited by the radiations of the antenna. Good agreement is achieved between the measurement and simulation, which indicates that a 10‐dB bandwidth of 38.75% from 2.56 to 3.8 GHz and 21.8% from 10.01 to 12.53 GHz, while a 3‐dB axial‐ratio bandwidth (ARBW) of 13.4% from 2.77 to 3.2 GHz and 9.23% from 10.25 to 11.25 GHz at two operation bands, respectively, are covered in the designed antenna. To explain the mechanism of dual‐band dual‐circular polarization, the analysis of magnetic fields distributions and a parametric study of the design are given. Meanwhile, compared to other recent works, a single layer structure, wider axial ratio and impedance bandwidths and a more compact size are the key features of the proposed antenna.     

Compact dual wide‐band four/eight elements MIMO antenna for WLAN applications

A compact four and eight elements multiple‐input‐multiple‐output (MIMO) antenna designed for WLAN applications is presented in this article. The antenna operates in IEEE 802.11b/g WLAN (2.4 GHz), IEEE 802.11 ac/n WLAN (5.2 and 5.8 GHz) and WiMAX (5.8 GHz) bands. The resonated mode of the antenna is achieved by two unequal Reverse‐L shaped, line‐shaped slots on top and parasitic element on the ground layer. The single antenna provides wide bandwidth of about 29% (2.3‐3.1 GHz) in lower and 22% (4.9‐6.1 GHz) in the upper band. The compactness of the single element antenna is found about 95% with respect to the patch and 61% in overall dimension. Thereafter an investigation is carried out to design two, four, and eight elements MIMO antennas. All of the multi‐element structures provide compact configuration and cover entire WLAN frequency ranges (2.4‐2.48 and 5.15‐5.85 GHz). The dimension of the proposed eight element MIMO antenna is 102 × 52 × 1.6 mm³. It covers the frequency (measured) from 2.4 to 3.1 GHz and 5 to 6.1 GHz. The diversity performance of the proposed MIMO antenna is also assessed in terms of the envelope correlation coefficient (ECC), diversity gain (DG), and total active reflection co‐efficient (TARC). The ECC is found <0.5 whereas the DG >9.0 is obtained for the desired bands.