Viewing angle enhanced integral imaging display based on double‐micro‐lens array

A viewing angle enhanced integral imaging display, which consists of a double microlens array, and a display panel is proposed. The double microlens array includes a convex microlens array and a concave microlens array. The display panel is used to display original elemental image array. The convex microlens array, located near the display panel, is used to provide a virtual elemental image array for the concave microlens array. The concave microlens array, located far away from the display panel, is used to display integral images with the virtual elemental image array. Compared with the original elemental image, the pitch for each virtual elemental image is magnified by the corresponding convex microlens. As a result, the viewing angle is expanded. Simulations based on ray‐tracing are performed and the results agree well with the theory.     

An integral‐imaging three‐dimensional display with wide viewing angle

Abstract— The viewing angle and flipping areas of a conventional integral‐imaging three‐dimensional (3‐D) display were analyzed. The pitches of the elemental image and micro‐lens are identical. The more micro‐lenses used, the smaller the viewing angle becomes and the wider the flipping areas become. In this paper, an improved integral‐imaging 3‐D display is presented. The pitch of the elemental image is larger than that of the micro‐lens. The single‐viewing angles of all micro‐lenses converge and there are no flipping areas at the optimal viewing distance. Computational reconstructions of improved and conventional integral imaging were carried out, and experimental results demonstrate that improved integral‐imaging 3‐D displays have a wider viewing angle than the conventional ones and do not have flipping areas at the optimal viewing distance.     

An integral‐imaging‐based head‐mounted light field display using a tunable lens and aperture array

A head‐mounted light field display based on integral imaging is considered as one of the promising methods that can render correct or nearly correct focus cues and address the well‐known vergence‐accommodation conflict problem in head‐mounted displays. Despite its great potential, it still suffers some of the same limitations of conventional integral imaging‐based displays such as low spatial resolution and crosstalk. In this paper, we present a prototype design using tunable lens and aperture array to render 3D scenes over a large depth range while maintaining high image quality and minimizing crosstalk. Experimental results verify and show that the proposed design could significantly improve the viewing experience.     

Viewing‐angle‐enhanced integral imaging system using high‐refractive‐index medium and curved micro‐lens array

In the integral imaging (II) system using a curved micro‐lens array (MLA), the viewing angle is limited by the gap mismatch. Here, we propose a system to decrease the gap mismatch for enhancing the viewing angle. In the proposed system, a layer of high‐refractive‐index medium is assembled between the display panel and the curved MLA. The principle of the proposed II system is studied in detail. Simulations based on ray tracing are performed, and the results show that the proposed II system can effectively enhance the viewing angle.     

Double‐viewing‐zone integral imaging 3D display without crosstalk based on a tilted barrier array

We propose an integral imaging (II) three‐dimensional (3D) display using a tilted barrier array and a stagger microlens array. The tilted barrier array consists of two orthogonally polarized sheets. In the stagger microlens array, the center of the microlens has p/2 shift with the elemental image along the horizontal direction, where p is the pitch of the microlens. The proposed II 3D display produces two different viewing zones and each of them is almost equal to that of the conventional II 3D display, and it has no crosstalk. We verify the feasibility of the proposed II 3D display in the simulation results.     

自由立体显示系统背光控制

介绍一种基于瞳孔跟踪的多用户自由立体显示器,利用菲涅尔透镜形成左右眼分立照明区域。本系统采用LCD作为基本显示屏幕,通过指向式LED照明背光设计,高精度瞳孔实时定位装置对人眼位置的探测,AVR单片机的系统控制,形成实时定向跟踪人眼的立体视窗。本装置可提供±25°水平视角范围内1至3人的实时无辅助立体显示。     

Prototyping and optical evaluation of 9‐in. OCB time‐division‐multiplexing 18‐view 3‐D display

Abstract— An integral imaging time‐division‐multiplexing 18‐view 3‐D display based on the one‐dimensional integral‐imaging (1‐D‐II) technique using a 9‐in. OCB‐LCD, lenticular sheet, and active shutter has been developed. By simulating a lens shape and a shutter structure and analyzing the light‐beam profile of the increasing‐parallax‐number region to find the best conditions, depth range, and viewing angle were an enhanced and a brighter and flicker‐less 3‐D image with smooth motion parallax was obtained.     

Moiré‐reduction methods for integral videography autostereoscopic display with color‐filter LCD

Abstract— Moiré‐reduction methods for integral videography displays are proposed. Integral videography is based on the principles of integral photography and extended real‐time video processing. There are two moiré‐reduction methods that can be used for integral videography displays that have a lens array and a liquid‐crystal display. The first is color moiré, and the second is intensity moiré. To reduce color moiré, an optimized color‐filter layout in the liquid‐crystal display was used. To reduce intensity moiré, a defocusing method was used. Adesign of a viewing area for the integral videography display is also presented. To control the viewing area, the lens pitch and the shape of the integral videography elemental image was changed. A 5‐in. integral videography display was implemented by using the proposed methods, and an integral videography display was evaluated.     

Two‐parallax‐barriers‐based autostereoscopic liquid‐crystal display without cross‐talk

Abstract— An autostereoscopic liquid‐crystal display (LCD) consists of two parallax barriers and an LCD including a liquid‐crystal panel, and a backlight panel is proposed. Parallax barrier 1 is located between the backlight panel and the liquid‐crystal panel, and Parallax barrier 2 is located between the liquid‐crystal panel and viewers. The operation principle of the autostereoscopic display and the calculation equations for the parallax barriers are described in detail. The autostereoscopic LCD was developed and produces high‐quality stereoscopic images without cross‐talk at the optimal viewing distance and less cross‐talk than a conventional one based on one parallax barrier at other viewing distances.     

Influence of 3‐D cross‐talk on qualified viewing spaces in two‐ and multi‐view autostereoscopic displays

Abstract— To estimate the qualified viewing spaces for two‐ and multi‐view autostereoscopic displays, the relationship between image quality (image comfort, annoying ghost image, depth perception) and various pairings between 3‐D cross‐talk in the left and right views are studied subjectively using a two‐view autostereoscopic display and test charts for the left and right views with ghost images due to artificial 3‐D cross‐talk. The artificial 3‐D cross‐talk was tuned to simulate the view in the intermediate zone of the viewing spaces. It was shown that the stereoscopic images on a two‐view autostereoscopic display cause discomfort when they are observed by the eye in the intermediate zone between the viewing spaces. This is because the ghost image due to large 3‐D cross‐talk in the intermediate zone elicits different depth perception from the depth induced by the original images for the left and right views, so the observer's depth perception is confused. Image comfort is also shown to be better for multi‐views, especially the width of the viewing space, which is narrower than the interpupillary distance, where the parallax of the cross‐talking image is small.     

3‐D mobile display based on dual‐directional light guides with a fast‐switching liquid‐crystal panel

Abstract— An autostereoscopic display based on dual‐directional light guides with a fast‐switching liquid‐crystal panel was designed and fabricated to provide better 3‐D perception with image qualities comparable to that of 2‐D displays. With two identical micro‐grooved light guides, each with a light‐controlled ability in one direction, two restricted viewing cones are formed to project pairs of parallax images to the viewer's respective eyes sequentially. Crosstalk of less than 10% located within ±8°–±30° and an LC response time of 7.1 msec for a 1.8‐in. LCD panel can yield acceptable 3‐D perceptions at viewing distance of 5.6–23 cm. Moreover, 2‐D/3‐D compatibility is provided in this module.     

Implementation of polarization‐multiplexed tiled projection integral imaging system

Abstract— A 40‐in. tiled projection integral imaging system has been implemented, adopting a polarization‐multiplexing technique. The system is composed of two full‐high‐definition (HD) projectors, a time‐varying polarizer, a polarization preserving screen, polarization films, a lens array, and a control unit. An elemental image set is projected using two full‐HD projectors to enhance the resolution of the system. The viewing region of the system is increased by using a polarization switching method. The polarization state of the elemental image set is changed by the time‐varying polarizer, and the elemental image set is diffused by the polarization preserving screen. The elemental image set with a preserved polarization state forms a three‐dimensional image with increased viewing angle by the integration of a lens array with polarization films. A 60‐in. tiled projection integral imaging system was also demonstrated using four full‐HD projectors.     

Depth‐enhanced integral‐imaging 3D display using different optical path lengths by polarization devices or mirror barrier array

Abstract— Depth‐enhanced integral three‐dimensional (3D) imaging using different optical path lengths by using a polarization selective mirror pair or mirror barrier array is proposed. In the proposed approach, the enhancement of image depth is achieved by repositioning two types of elemental image planes, thus effectively two central depth planes are obtained. One of the two implementation methods makes use of the two‐arm structure that has different optical path lengths and polarization‐selective mirrors. The other utilizes the mirror barrier array. The primary advantage of the method with polarization devices is that we can observe 3D images that maintain some level of viewing resolution with a large depth difference without any mechanical moving part. The mirror barrier array has the advantage of the compact thickness. We demonstrated and verified our proposals experimentally.     

Efficiency analysis for multi‐view spatially multiplexed autostereoscopic 2‐D/3‐D displays

Abstract— The wide‐viewing freedom often requested by users of autostereoscopic displays can be delivered by spatial multiplexing of multiple views in which a sequence of images is directed into respective directions by a suitable autostereoscopic optical system. This gives rise to two important design considerations — the optical efficiency and the resolution efficiency of the device. Optical efficiency is particularly important in portable devices such as cell phones. A comparison is given between lens and barrier systems for various spatial multiplexing arrangements. Parallax‐barrier displays suffer from reduced optical efficiency as the number of views presented increases whereas throughput efficiency is independent of the number of views for lens displays. An autostereoscopic optical system is presented for the emerging class of highly efficient polarizer‐free displays. Resolution efficiency can be evaluated by investigating quantitative and subjective comparisons of resolution losses and pixel appearance in each 3‐D image. Specifically, 2.2‐in.‐diagonal 2‐D/3‐D panel performance has been assessed using Nyquist boundaries, human‐visual contrast‐sensitivity models, and autostereoscopic‐display optical output simulations. Four‐view vertical Polarization‐Activated Microlens technology with either QVGA mosaic or VGA striped pixel arrangements is a strong candidate for an optimum compromise between display brightness, viewing angle, and 3‐D pixel appearance.     

360°‐viewable cylindrical integral imaging system using a 3‐D/2‐D switchable and flexible backlight

Abstract— A 360°‐viewable cylindrical three‐dimensional (3‐D) display system based on integral imaging has been implemented. The proposed system is composed of a cylindrically arranged electroluminescent (EL) pinhole film, an EL film backlight, a barrier structure, and a transmission‐type flexible display panel. The cylindrically arranged point‐light‐source array, which is generated by the EL pinhole film reconstructs 360°‐viewable virtual 3‐D images at the center of the cylinder. In addition, the proposed system provides 3‐D/2‐D convertibility using the switching of EL pinhole film from a point light source to a surface light source. In this paper, the principle of operation, analysis of the viewing parameters, and the experimental results are presented.     

High‐quality direct‐view display combining multiple integral 3D images

This paper proposes a method for combining multiple integral three‐dimensional (3D) images using direct‐view displays to obtain high‐quality results. A multi‐image combining optical system (MICOS) is used to enlarge and combine multiple integral 3D images without gaps. An optical design with a simple lens configuration that does not require a diffuser plate prevents the deterioration in resolution resulting from lens arrangement errors and the diffuser plate. An experiment was performed to compare a previously developed method with the proposed method, and the latter showed a significant improvement in image quality. A method for expanding the effective viewing angle of the proposed optical design was also developed, and its effectiveness was confirmed experimentally. A prototype device of the proposed optical design was constructed using a high‐density organic light‐emitting diode (OLED) panel with 8K resolution and 1058 ppi pixel density to achieve 311 (H) × 175 (V) elemental images, a viewing angle of 20.6° in both the horizontal and vertical directions, and a display size of 9.1 in. In addition, the proposed optical design enabled making device considerably thinner, ie, with a thickness of only 47 mm.     

Key design issues for autostereoscopic 2‐D/3‐D displays

Abstract— Flat‐panel 2‐D/3‐D autostereoscopic displays are now being commercialized in a variety of applications, each with its own particular requirements. The autostereoscopic display designer has two key considerations to address in order to meet customer needs — the optical output of the display (defined by the output window structure) and the choice of optical components. Window structure determines 3‐D image resolution, achievable lateral and longitudinal viewing freedom, crosstalk, and 3‐D fringe contrast. Optical‐component selection determines the quality of the imaging of such windows, viewing distances, device ruggedness, thickness, and brightness. Trade‐offs in window design are described, and a comparison of the leading optical component technologies is given. Selection of Polarisation Activated Microlenses? architectures for LCD and OLED applications are described. The technology delivers significant advantages particularly for minimising nominal viewing distances in high pixel density panels and optimizing device ruggedness while maintaining display brightness.     

Depth‐ and viewing‐angle‐enhanced 3‐D/2‐D switchable display system with high contrast ratio using multiple display devices and a lens array

Abstract— An improved 3‐D/2‐D switchable display system with enhanced depth and viewing angle by adding two LCD panels to an integral imaging system has been realized. The proposed system uses the see‐through property of an LCD panel and displays multiple sets of elemental images on the LCD panels to integrate them on multiple locations simultaneously. As a result, the depth of the 3‐D image can be enhanced. For wide viewing angles, the time‐multiplexing method was adopted by displaying mask patterns on the front LCD panel. In addition, another technique to increase the contrast ratio of the proposed system has also been developed. Some experimental results will be provided.     

Effect of number of views to the viewing experience with autostereoscopic 3‐D displays

Abstract— The observers' 3‐D viewing experience when the way the content is created and shown on an autostereoscopic 3‐D display alternate is evaluated. The observer's depth impression, and the perceived contour accuracy and image naturalness or peskiness of the content shown on a 3‐D display, has been investigated. In addition, the consequences of the way the content is created to the results from the optical characterization for the same display have been studied. The alternation of the content was realized in two different ways. Firstly, the number of views for creating the image was varied. Two, five, and 14 views were used; the main focus being on testing the same display and treating it as an ordinary two‐view and a 14‐view display with inter‐sub‐view crosstalk. Also, the intermediate condition where five views with non‐uniform view‐specific crosstalk were used has been investigated. Secondly, the way the content is created was varied by using images with computer‐generated content and photos. The effect of these parameters on viewing experience as such and especially the effect of 3‐D crosstalk on the viewing experience were studied.     

Resolution enhancement of integral‐imaging three‐dimensional display using directional elemental image projection

Abstract— A new approach to resolution enhancement of an integral‐imaging (II) three‐dimensional display using multi‐directional elemental images is proposed. The proposed method uses a special lens made up of nine pieces of a single Fresnel lens which are collected from different parts of the same lens. This composite lens is placed in front of the lens array such that it generates nine sets of directional elemental images to the lens array. These elemental images are overlapped on the lens array and produce nine point light sources per each elemental lens at different positions in the focal plane of the lens array. Nine sets of elemental images are projected by a high‐speed digital micromirror device and are tilted by a two‐dimensional scanning mirror system, maintaining the time‐multiplexing sequence for nine pieces of the composite lens. In this method, the concentration of the point light sources in the focal plane of the lens array is nine‐times higher, i.e., the distance between two adjacent point light sources is three times smaller than that for a conventional II display; hence, the resolution of three‐dimensional image is enhanced.