Stacked rectangular dielectric resonator antenna with different volumes for wideband circular polarization coupled with step‐shaped conformal strip

This paper presents a wideband circularly polarized broadside radiation characteristics by using stacked rectangular dielectric resonator antenna (DRA) with different volumes. In this designed antenna, the wide input impedance‐ and axial ratio (AR)‐bandwidths come from three factors: stacked rectangular DR with different volumes, stepped‐shaped conformal strip associated with microstrip line as a feed and different type of partial ground plane. Here, the orthogonal TE^x_δ11 and TE^y_1δ1 modes have been responsible for the generation of CP radiation in stacked rectangular DRA. Measured results show that the proposed stacked rectangular DRA with different volumes achieves input impedance bandwidth of 54.84% while AR bandwidth has been found to be 11.53%. The proposed antenna provides broadside right‐handed CP radiation pattern with gain ranges from 2.27–5.80 dBic and offers an average radiation efficiency of 89.48%, across the entire working bandwidth, respectively. Therefore, this antenna is very much useful for the ISM 2400 band applications.     

Wideband circularly polarized hybrid dielectric resonator antenna with bi‐directional radiation characteristics for various wireless applications

In this article, a wideband circularly polarized (CP) dielectric resonator (DR) over an asymmetric‐slot radiator based hybrid‐DR antenna is proposed with bi‐directional radiation characteristics. Bi‐directional CP radiation of the dual sense is obtained using a rectangular‐DR over asymmetric‐rectangular‐slot radiator with L‐shaped feed line. The asymmetric‐slot radiator feed by L‐shaped stub with the coplanar waveguide is used for generating two orthogonal modes, namely TE ^x _δ11 and TE^y_1δ1 in the combined (rectangular‐DR and asymmetric‐slot radiator) hybrid‐DR antenna, which is verified by the distribution of electric field inside the rectangular DRA. The measured reflection coefficient bandwidth (S₁₁ < ?10 dB) and axial ratio (AR) bandwidth (AR < 3 dB) of the hybrid‐DR antenna are 80.5% (1.87‐4.39 GHz) and 43.8% (1.75‐2.73 GHz), respectively. The antenna radiation is in the broadside (θ = 0°, ? = 0°) direction as well as in the backside (θ = 180°, φ = 0°) direction with equal magnitudes in both the directions. Right‐handed and left‐handed CP waves are achieved respectively, in the boresight (+Z) and the backside (?Z) directions. The proposed CP hybrid‐DR antenna gives an average gain of 3.55 dBic and radiation efficiency of 95.0% in both directions. The proposed antenna covers various wireless useful bands such as ISM 2400 band, Wi‐Fi, Bluetooth, and Wi‐MAX (2.5‐2.7 GHz).     

Wideband circularly polarized dielectric resonator antenna coupled with meandered‐line inductor for ISM/WLAN applications

A new meandered‐line inductor fed wideband circularly polarized rectangular dielectric resonator antenna (DRA) with partial ground plane has been developed in this work. Meandered‐line inductor feed and partial ground plane are used for generation of orthogonal modes, hence circular polarization (CP) in DRA. By controlling the length of meandered‐line inductor, three different CP DRA have been designed for different wireless applications such as Wi‐MAX and WLAN/ISM 2400 band. Distribution of electric field inside rectangular DRA shows that all three antenna having TE_11δ mode. Finally, a lower frequency band application at 2.4 GHz (ISM) called here as Proposed Antenna, has been considered for fabrication. This designed antenna shows measured ?10 dB input impedance bandwidth of 20.67% and 3‐dB axial ratio bandwidth of 27.95% in broadside direction. All these three CP antennas (Antenna‐1 to Proposed Antenna) are showing stable gain and right hand circular polarization in broadside direction.     

Circularly polarized rectangular DRA coupled through orthogonal slot excited with microstrip circular ring feeding structure for Wi‐MAX applications

In this article, a wideband circularly polarized rectangular dielectric resonator antenna (RDRA) coupled through orthogonal slots and excited with a new microstrip circular ring has been investigated. Circular polarization has been achieved by using plus shaped (+) slot on the ground plane and excited through a new microstrip circular ring feed. TE_11δ mode has been excited in the RDRA which has been confirmed through the distribution of E ‐field and dielectric waveguide model (DWM) method of RDRA. Circularly polarized (CP) RDRA offering measured ?10 dB input impedance bandwidth of 20.79% (centered at 3.27 GHz) and 3 dB axial ratio bandwidth in broadside direction of 12.09% (centered at 3.39 GHz), respectively. From the CP radiation pattern, proposed design confirms that right ‐ handed CP (RHCP) in broadside direction. The difference between RHCP field and left ‐ handed CP (LHCP) field are above ?26 dB in operational band. In addition, the proposed CP antenna offers stable gain and radiation efficiency in working bands and it is suitable for IEEE 802.16e/d Wi‐MAX (3.3‐3.7 GHz) band.     

An ultra wideband “OM” shaped DRA with a defected ground structure and dual polarization properties for 4G/5G wireless communications

This research article reports a new Dielectric Resonator Antenna (DRA) with its Dielectric resonator (DR) modified to an “OM” shape for UWB (3.1‐11.1 GHz), to support high data rate multimedia applications for 4G/5G communications. The proposed DRA reports a peak gain of 7.68 dB and a dual polarization behavior for a frequency band from 6 to 11.1 GHz. It has overall antenna dimensions of 50 × 40 × 4.87 mm³ and is fabricated on a commercially available Rogers RT 5880 substrate (with ε_r = 2.2), which is fed using a microstrip feedline with a P‐type transformer that offers an input impedance of 50 Ω to the DR. A conformal strip between the feedline and the OM shaped DR improves the impedance matching at the UWB frequency response of the DRA. This UWB frequency response is mainly because of its optimized “OM” shaped DR structure that excites a TE₁₁₁ mode at 4.9 GHz and two higher order modes TE₂₁₁ and TE₂₂₁ at resonant frequencies of 7.2 and 8.35 GHz, respectively. Additionally the proposed OM shaped DR also generates orthogonal modes of TE₂₁₁^x and TE₂₁₁^y at 6.5 and 7.2 GHz and TE₂₂₁^x and TE₂₂₁^y at 8.35 and 10 GHz, respectively. The proposed DRA therefore exhibits an elliptically polarized behavior with axial ratio bandwidth of 5.1 GHz (≤10 dB) from 6 to 11.1 GHz. A measured impedance bandwidth of 5.25 GHz from 3.8 to 9.05 GHz and 1.5 GHz from 10 to 11.5 GHz and a peak‐measured gain of 7.68 dB at 10.5 GHz (with an average gain of 4.6 dB) has been reported for the proposed DRA. An UWB performance, with good gain properties and an elliptically polarized behavior allows the proposed “OM” shaped DRA to be suitable for short range 4G/5G UWB wireless communications for future multimedia rich WPAN (wireless personal area networks), WLAN, Wi‐MAX, INSAT applications, satellite applications, and X band RADAR (for defense communication) applications.     

A hybrid dual‐mode dielectric resonator antenna with wide beamwidth

A wide beamwidth rectangular dielectric resonator antenna (RDRA) working on dual modes is proposed in this letter. The radiator of the antenna with inside metallic posts and outside metallic walls is placed on a groundplane with a size of 2λ_g × 2λ_g. A TE′_δ21TE′_δ21 mode, which is similar to TE_δ21 mode, is generated by using the metallic posts inside the DR. By adjusting the height of metallic posts and the distance between the DRA and the metallic walls, the TE′_δ21 mode, and the TE_δ11 mode are superimposed with each other, widening the beamwidth of the RDRA to above 140° in both the E‐plane and H‐plane. This antenna works from 8.1 to 8.7 GHz with a relative bandwidth of 7.1%, which can be a good candidate in navigational systems.     

A novel millimeter‐wave dual‐band circularly polarized dielectric resonator antenna

In this article, a novel dual‐band circularly polarized (CP) dielectric resonator antenna (DRA) for millimeter‐wave (MMW) band is presented. The rectangular dielectric resonator with layered truncated corners is excited by a microstrip‐coupled cross‐slot. CP radiations in the lower band are realized by utilizing two quasi‐TE₁₁₁ modes operating at 21.7 GHz and 23.8 GHz, while CP radiations in the upper band are obtained by exciting a quasi‐TE₁₁₃ mode at 28.2 GHz. The dual‐band DRA is fabricated and measured. Due to the higher order mode, the average gain of the DRA in the upper band is about 3 dB higher than that in the lower band. The measured impedance bandwidths (|S₁₁| < ?10 dB) are 17.0% (20.5‐24.3 GHz) and 15.2% (26.1‐30.4 GHz), while the measured axial ratio (AR) bandwidths (AR < 3 dB) are 12.8% (21.2‐24.1 GHz) and 5% (27.4‐28.8 GHz). In addition, the peak gain values are 5 and 8 dBic.     

A dual‐band dual‐polarized cubical DRA coupled with new modified cross‐shaped slot for ISM (2.4 GHz) and Wi‐MAX (3.3‐3.6 GHz) band applications

In this article, a new modified cross‐shaped coupled cubical dielectric resonator antenna (DRA) has been investigated for dual‐band dual‐polarized applications. The linearly polarized (LP) fields in DRA has been generated by using a single slot in the ground plane and kept at either 45° (S_L1) or ?45° (S_L2) from the microstrip feed line. Combining these two slots (S_L1 and S_L2) in the modified ground plane, the proposed structure able to generate circularly polarized (CP) field in DRA. But the generated CP field is not enough to cover ISM 2400 band. To achieve CP in ISM 2400 band, an extra slot (S_L3) to the existing slots and an extra strip (S_T) in the circular ring feed line have been included. This modified final antenna arrangement has been able to produce LP (due to loading effect, ie, slot and DRA) and CP fields (orthogonal modes have been generated, ie, TE ^x₁₁₁ and TE ^y₁₁₁), simultaneously. The measured CP and LP, ?10 dB impedance bandwidths are 11.85% (2.38‐2.68 GHz) and 9.11% (3.25‐3.56 GHz) in combination with the 3‐dB axial ratio bandwidth of 4.11% (2.38‐2.48 GHz). The generated CP and LP fields are used for different wireless communication bands such as ISM 2400 and Wi‐MAX (3.3‐3.7 GHz) bands.     

Compact dual‐band ring dielectric resonator antenna with moon‐shaped defected ground structure for WiMAX/WLAN applications

In this article, compact ring‐shaped dielectric resonator antenna (DRA) along with moon‐shaped defected ground structure (DGS) was studied. The proposed antenna was fed by microstrip line shifted from center position, which excited TE_01δ mode in ring DRA. Moon‐shaped DGS was acting as a radiator and also reduced the size of proposed antenna by an amount of 14.87% (lower frequency band) and 48.77% (upper frequency band). The proposed antenna was designed to resonate at two different frequencies namely 2.24 and 5.82 GHz with a fractional bandwidth of 30.17% and 22.14%, respectively. Based on optimized design parameters, archetype of antenna structure has been constructed and measured successfully, which shows good agreement with simulated ones. The proposed antenna design was suitable for WLAN (2.4/5.2/5.8 GHz); WiMAX (2.5/5.5 GHz); AMSAT (5.6/5.8 GHz); and WAVE (5.9 GHz) bands. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:503–511, 2016.     

A new dual‐mode wideband circularly polarized rectangular dielectric resonator antenna coupled with stubs and asymmetric ground plane for WiMAX applications

In this article, a new radiating stub microstrip feed has been investigated with asymmetrical ground plane for generation of circular polarization (CP) in a dielectric resonator antenna (DRA). Here, asymmetrical ground plane and 3 radiating stubs with microstrip feed line are used for generation of 2 different modes namely TE_11δ and TE_12δ in rectangular DRA. By using mode matching concepts, these modes are responsible for enhancing the impedance bandwidth (TE_12δ ie, and ) and axial ratio (AR) bandwidth (TE_11δ ie, and ) in proposed antenna. Designed antenna offers measured input impedance bandwidth (|S₁₁| < ?10 dB) and AR bandwidth (AR < 3‐dB) of 44.78%, ranging from 4.6 to 6.9 GHz and 23.32%, ranging from 4.6 to 6.9 GHz, respectively. It has been observed that proposed antenna shows left‐handed CP fields in boresight direction with average gain of 3.15 dBic and radiation efficiency of 90.54%. Designed antenna is suitable for Wi‐MAX (3.3‐3.7 GHz) applications.     

A dual‐band circularly polarized antenna with aid of dual cylindrical dielectric resonator blocks

In this communication, a dielectric resonator based circularly polarized antenna is designed and investigated. A modified aperture is used to excite dual cylindrical dielectric resonator (CDR) blocks. Two important characteristics of the proposed radiator that makes it all the more attractive are as follows: (i) excitation of dual radiating modes that is, HEM_11δ and TE_01δ mode in cylindrical DR along with the support of dual‐band circularly polarized (CP) waves; (ii) arrangements of dual CDR blocks to reduce the Q‐factor which is useful to enhance the impedance bandwidth of both frequency bands. Fabrication as well as experimental measurement of the antenna prototype has been done for verifying simulation outcomes. This antenna design operates over dual frequency bands, that is, 5.01‐6.41 GHz and 7.3‐7.9 GHz with the fractional bandwidth of 24.73% and 9.39%, respectively. It supports CP waves over the frequency range 6.1‐6.5 GHz and 7.4‐7.8 GHz. The proposed antenna backs right‐hand circularly polarized (RHCP) radiation with an average gain of 4.5 dBi. These characteristics make it well fitted for WLAN, WiMAX (5.2/5.5/5.8 GHz), and downlink defense purpose satellite communication (7.2‐7.7 GHz).     

Dual‐band circularly polarized dielectric resonator antenna for wireless applications

This letter investigates an integrated antenna configuration for WLAN/WiMAX applications. The proposed composite antenna configuration is simply the grouping of ring dielectric resonator along with reformed square‐shaped slot antenna. Three significant characteristics of proposed article are: (1) aperture act as magnetic dipole and excite HE_11δ mode in ring dielectric resonator antenna; (2) reforming of square aperture generates orthogonal modes in ring DRA and creates CP in lower frequency band; (3) annular‐shaped Microstrip line along with reformed square aperture creates CP wave in upper frequency band. With the purpose of certifying the simulated outcomes, prototype of proposed structure is fabricated and tested. Good settlement is to be got between experimental and software generated outcome. Experimental outcomes show that the proposed radiating structure is operating over 2 frequency bands that is, 2.88‐3.72 and 5.4‐5.95 GHz. Measured 3‐dB axial ratio bandwidth in lower and upper frequency band is approximately 9.52% (3.0‐3.4 GHz) and 5.85% (5.64‐5.98 GHz), respectively. These outcomes indicate that the proposed composite antenna structure is appropriate for WLAN and WiMAX applications.     

Design and its state‐of‐the‐art of different shaped dielectric resonator antennas at millimeter‐wave frequency band

This review article provides an extensive literature survey on the research progress of dielectric resonator antenna (DRA) at millimeter‐wave frequency band that includes concepts of DRAs, their empirical formulae and design methodologies for different shaped DRAs at 60 GHz frequency band. The different shaped DRAs such as cylindrical, rectangular, hexagonal, and octagonal at 60 GHz are designed, simulated and analyzed using CST microwave studio solver. The ?10 dB impedance bandwidth of cylindrical, rectangular, hexagonal, and octagonal DRAs are 52.7 to 62.8 GHz, 57 to 62.2 GHz, 55.8 to 64.2 GHz, and 54.2 to 63.5 GHz, respectively. The idea behind getting broad impedance bandwidth is due to use of double‐layer substrate with different permittivity (ε_r1 = 4 and ε_r2 = 11.9). Empirical formulae are deduced for hexagonal and octagonal DRA, by studying the analogy of dielectric resonator geometry. Consequently, the mode of different shaped DRAs, that is, HEM₁₁₁ and TE₁₁₁ are investigated by the electric field and magnetic field distribution. With these analysis, a comprehensive research review over the period of the last two decades is carried for investigating various techniques, targeted to realized gain, circular polarization, and impedance bandwidth. Along with these analysis the state‐of‐the‐art at different shaped DRAs at mm‐wave frequency band are also reported.     

Design approach for dual element hybrid MIMO antenna arrangement for wideband applications

This communication explains the designing of two‐port based hybrid radiator for multiple‐input‐multiple‐output (MIMO) applications. Hybrid radiator includes U‐shaped printed line and ring dielectric resonator antenna (ri‐DRA). Wideband characteristics have been achieved by exciting both the U‐shaped printed line along with ri‐DRA. The U‐shaped metallic line acts as a magnetic dipole and helps to excite fundamental hybrid mode (HE_11δ) in the ri‐DRA. Dual L‐shaped and a rectangular defect have been created in ground plane for achieving wideband isolation over the working frequency band. Optimized Scattering parameters and far‐field results are verified by fabricating and testing of antenna prototype. Experimental outcomes confirm that the proposed MIMO antenna gives wider impedance bandwidth (80%), improved port isolation (better than 18 dB), stable gain (~ 4 dB), and radiation pattern. Various MIMO performance factors are analyzed and instituted in the tolerable boundaries.     

Hybrid two segments ring dielectric resonator antenna for ultrawideband application

In this article, a hybrid two segments ring dielectric resonator antenna with partial ground plane, for ultrawideband application is described. The proposed antenna structure consists of annular shape microstrip line along with two ring dielectric resonators having different permittivity. By applying the combination of shifted annular shape microstrip line (used as a radiator as well as to convert TM_01δ mode to TE_01δ mode) and two segments ring dielectric resonator, ultra wide bandwidth has been achieved. Prototype of proposed structure has been fabricated and tested. Measured results show good agreement with the simulated ones. The proposed antenna structure operates over a frequency range of 3.45‐10.9 GHz with a fractional bandwidth of 103.83% and having better gain and radiation characteristics. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:47–53, 2016.     

Electrically coupled dual semicylindrical dielectric resonator antenna with inverted arrangement for wideband applications

In this article, an electrically coupled dual semicylindrical dielectric resonator antenna (SC‐DRA) is presented and discussed for wideband applications. The two SC‐DRAs are placed in an inverted arrangement and fed by a coaxial probe to excite the fundamental mode TM _11δ and higher order mode TM _21δ. In the proposed design, wideband performance is obtained by combining the fundamental and higher order mode. Proposed wideband antenna is showing simulated and measured input impedance bandwidth (|S₁₁| ≤ ?10 dB) of 57.94% (3.8‐6.9 GHz) and 64.4% (3.38‐6.6 GHz), respectively. The far field radiation patterns are found to be consistent and 3‐dB beamwidth of 49° and 30° has been achieved at 4.11 and 6.48 GHz, respectively within the working band. This design attains an average gain of 5.65 dBi and radiation efficiency of 97%, respectively.     

Dual‐band circular‐polarization reconfigurable liquid dielectric resonator antenna

A novel single‐fed dual‐band circular‐polarization (CP) reconfigurable liquid dielectric resonator antenna (LDRA) using 3D printing technology is proposed in this article. With the quasi‐TE₁₁₁ and ‐TE₁₁₃ modes of the rectangular LDRA excited, a dual‐band design is achieved. To realize the CP reconfigurability, a combined container, holding the fluidic dielectric (Ethyl acetate, ε _r = 6.6), is fabricated by 3D printing technology. Therefore, the CP can be switched between two different states: (1) left hand CP (LHCP), when the right oblique container is full of the liquid solution; (2) right hand CP (RHCP), when the liquid solution is transferred into the left oblique one. Measured results demonstrate that the proposed antenna can achieve the CP reconfigurability in dual band, with the wide bandwidths (|S₁₁| < ?10 dB and AR < 3 dB) of 10.4% (1.55‐1.72 GHz) and 9.7% (2.29‐2.52 GHz), which cover GPS and WLAN bands.     

Miniaturized dual‐band dielectric resonator antenna for IEEE 802.16d fixed WiMAX applications

A miniaturized dual‐band C‐shaped dielectric resonator antenna (DRA) with partial ground plane is presented for IEEE 802.16d fixed WiMAX applications at 3.5 and 5.8 GHz. The design starts with dimensioning a single band cylindrical DRA, which has been transferred to get a dual‐band ring‐shaped DRA. One portion of the ring‐shaped DRA is removed for forming a C‐shaped DRA to get a more compact antenna. For easy fabrication, the compact DRA dimensioned as 60 × 50 × 6.6 mm³ is excited by a microstrip line feeding. The design parameters are inner and outer radii of the C‐shaped antenna and air gap (between DR and ground) to control both the resonating frequency and the quality factor. The result shows peak gain around 3.26 and 5.55 dBi at 3.5 and 5.8 GHz, respectively. The obtained results indicate very good agreement between the simulated and measured results. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE 22: 682–689, 2012.     

A‐shaped wideband dielectric resonator antenna for wireless communication systems and its MIMO implementation

In this article, a new A‐shaped dielectric resonator antenna (DRA) excited by a conformal strip is proposed for wideband applications. The wide bandwidth is achieved by combining two adjacent modes that is, TM₁₀₁ and TM₁₀₃. The experimental results demonstrate that the proposed DRA offers an impedance bandwidth (for S11?10 dB) of 59.7% (3.24‐6.0 GHz), covering IEEE 802.11 and U‐NII bands. The antenna provides a fairly stable radiation pattern with the gain ranging from 5.29 to 7 dBi across the operating bandwidth. A dual‐element multiple‐input multiple‐output (MIMO) system is also realized using the proposed wideband DRA. The impedance bandwidth of the dual‐element MIMO antenna is 59.2% and 60.9% for Port1 and Port2, respectively and the isolation between the ports is better than 20 dB across the bandwidth. For Port1, the gain of the MIMO antenna ranging from 6.03 to 7.45 dBi is obtained across the bandwidth. Furthermore, the diversity performance of the MIMO antenna is found to be good with envelope correlation coefficient below 0.003 over the operating band. The proposed antenna could be the potential candidate for worldwide interoperability for microwave access (WiMAX), wireless local area network (WLAN) and lower European UWB frequency band (3.4‐5.0 GHz) applications.     

A novel wideband circularly polarized modified square‐slot antenna with loaded strips

In this article, a novel inverted L‐shaped microstrip‐fed wideband circularly polarized (CP) modified square‐slot antenna is designed. By cutting a pair of triangle chamfers and introducing a pair of triangle patches at the square‐slot, the antenna achieves a wideband CP radiation. Moreover, CP performance of the antenna can also be remarkably enhanced by protruding an L‐shaped strip and embedding a tuning rectangle slot into the slot ground. The measured results demonstrate that the axial‐ratio bandwidth for AR < 3 is 75.1% (from 4.45 to 9.8 GHz) and the impedance bandwidth (|S₁₁| < ?10 dB) reaches 65.8% (from 4.95 to 9.8 GHz). In addition, surface current studies are performed to illustrate the operating mechanism of CP operation, and the antenna has bidirectional radiation characteristics with an average gain of ~4 dBic within the CP band.