A coaxial probe fed wideband circularly polarized antenna using unequal and adjacent‐slided rectangular dielectric resonators for WLAN applications

In this article, a coaxial probe fed wideband circularly polarized antenna has been designed and investigated using unequal and adjacent‐slided rectangular dielectric resonators radiating in broadside direction (Φ = 0°, θ = 0°). Wi‐Fi wireless network use radio signal either in 2.4 or 5 GHz band. Owing to high rush in 2.4 GHz band, the proposed antenna is designed for 5 GHz (5.15‐5.825 GHz) WLAN band. The proposed design uses fundamental orthogonal modes and excited in two individual rectangular dielectric resonators to achieve wide axial‐ratio bandwidth (below 3 dB). Measured input reflection coefficient (below ?10 dB) and axial ratio bandwidth (below 3 dB) of 26.07% (5.27‐6.85 GHz) and 26.85% (5.32‐6.97 GHz) has been attained, respectively, in this proposed antenna. The measured far‐field patterns such as gain and radiation patterns are showing consistent performance throughout the working band.     

A compact printed multistubs loaded resonator rectangular monopole antenna design for multiband wireless systems

In the present article, a compact triple‐band multistubs loaded resonator printed monopole antenna is proposed. The antenna consists of a quarter wavelength two asymmetrical inverted L‐shaped stubs to excite two resonant modes for 3.5/5.5 GHz bands and one integrated horizontally T‐shaped stub with inverted long L‐shaped stub to excite resonant mode for 2.5 GHz band. By loading these stub resonators along y‐axis with distinct gaps, the antenna resonates at three frequencies 2.57/3.52/5.51 GHz covering the desired bands while keeping compact size of 24 × 30 mm² (0.2 × 0.25 ). The proposed antenna is fabricated on Rogers RT/duroid 5880 substrate with thickness 0.79 mm and its performance experimentally verified. The measured results reveal that the antenna has the impedance bandwidths of about 210 MHz (2.50‐2.71 GHz), 260 MHz (3.37‐3.63 GHz), and 650 MHz (5.20‐5.85 GHz), for 2.5/3.5/5.5 GHz WiMAX and 5.2/5.8 GHz WLAN band systems. The antenna provides omnidirectional radiation patterns and flat antenna gains over the three operating bands. In addition, the design approach and effects of multistubs resonator lengths on the operating bands are also examined and discussed in detail.     

A new dual‐mode wideband circularly polarized rectangular dielectric resonator antenna coupled with stubs and asymmetric ground plane for WiMAX applications

In this article, a new radiating stub microstrip feed has been investigated with asymmetrical ground plane for generation of circular polarization (CP) in a dielectric resonator antenna (DRA). Here, asymmetrical ground plane and 3 radiating stubs with microstrip feed line are used for generation of 2 different modes namely TE_11δ and TE_12δ in rectangular DRA. By using mode matching concepts, these modes are responsible for enhancing the impedance bandwidth (TE_12δ ie, and ) and axial ratio (AR) bandwidth (TE_11δ ie, and ) in proposed antenna. Designed antenna offers measured input impedance bandwidth (|S₁₁| < ?10 dB) and AR bandwidth (AR < 3‐dB) of 44.78%, ranging from 4.6 to 6.9 GHz and 23.32%, ranging from 4.6 to 6.9 GHz, respectively. It has been observed that proposed antenna shows left‐handed CP fields in boresight direction with average gain of 3.15 dBic and radiation efficiency of 90.54%. Designed antenna is suitable for Wi‐MAX (3.3‐3.7 GHz) applications.     

A‐shaped wideband dielectric resonator antenna for wireless communication systems and its MIMO implementation

In this article, a new A‐shaped dielectric resonator antenna (DRA) excited by a conformal strip is proposed for wideband applications. The wide bandwidth is achieved by combining two adjacent modes that is, TM₁₀₁ and TM₁₀₃. The experimental results demonstrate that the proposed DRA offers an impedance bandwidth (for S11?10 dB) of 59.7% (3.24‐6.0 GHz), covering IEEE 802.11 and U‐NII bands. The antenna provides a fairly stable radiation pattern with the gain ranging from 5.29 to 7 dBi across the operating bandwidth. A dual‐element multiple‐input multiple‐output (MIMO) system is also realized using the proposed wideband DRA. The impedance bandwidth of the dual‐element MIMO antenna is 59.2% and 60.9% for Port1 and Port2, respectively and the isolation between the ports is better than 20 dB across the bandwidth. For Port1, the gain of the MIMO antenna ranging from 6.03 to 7.45 dBi is obtained across the bandwidth. Furthermore, the diversity performance of the MIMO antenna is found to be good with envelope correlation coefficient below 0.003 over the operating band. The proposed antenna could be the potential candidate for worldwide interoperability for microwave access (WiMAX), wireless local area network (WLAN) and lower European UWB frequency band (3.4‐5.0 GHz) applications.     

Dual port aperture coupled MIMO cylindrical dielectric resonator antenna with high isolation for WiMAX application

In this article, a dual port aperture coupled MIMO cylindrical dielectric resonator antenna with enhanced isolation is proposed. Dual feeding techniques are used to excite dielectric resonator. These feeding structures are oriented in such a way so that they can produce orthogonal mode in the dielectric resonator. High isolation is observed by generating two orthogonal modes, that is, and in the dielectric resonator. The fractional bandwidth for port 1 and port 2 is 17.8% (3.1‐3.68 GHz) and 18.4% (3.1‐3.7 GHz), respectively, and isolation between the two ports exceeds ?25 dB within the required band. The proposed antenna is simulated, fabricated, and experimentally tested. Good agreements between measured and simulated results are observed. The various diversity performance parameters are also lie within their acceptable limits. Based on presented results, it can be concluded that the presented MIMO antenna is suitable for WiMAX (3.3‐3.6 GHz) applications.     

A novel stealth Vivaldi antenna with low radar cross section

A novel stealth Vivaldi antenna with low radar cross section (RCS) is proposed in this article that covers the ultrawide band (UWB) from 2 to 12 GHz. As a special scatterer, the antenna can be responsible for the larger part of the total RCS of many military platforms. In this article, the configuration of the metal patch is modified, based on the difference of the current distribution while the antenna radiates and scatters. The monostatic radar cross section of proposed antenna is reduced in most parts of the band with polarized and polarized. Maximally 14 dBsm RCS reduction is achieved. The gain of the proposed antenna and reference antenna are in good agreement in most of the impedance bandwidth. Results are provided to demonstrate that the excellent radiation and perfect stealth performance is achieved. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:255–261, 2015.     

A novel combined structure for decoupling E/H‐plane microstrip antenna array

A novel structure combined of an I‐shaped microstrip line and eight slots etched from the ground plane is proposed to decouple both E‐plane and H‐plane antenna arrays. Five types of antenna arrays at 5.25 GHz with different linear placements are discussed for the first time and the decoupling structure is valid to them all. The edge‐to‐edge distances of the H‐plane arrays and the E‐plane arrays are 0.09 and 0.17 _, respectively. Simulated and measured results indicate that the combined structure can effectively reduce the mutual coupling, with the maximum values reaching to 22.62, 28.41, 21.04, 22.33, and 26.04 dB for five types, respectively. The proposed structure is potential in the application of multielement arrays and communication MIMO system.     

Wideband circularly polarized square dielectric resonator antenna for WLAN/WiMAX applications

In the present article, a novel single fed square dielectric resonator antenna (SDRA) is presented and two orthogonal modes ( ${\mathrm{TE}}_{111}^{\mathrm{x}}\text{and}{\mathrm{TE}}_{111}^{\mathrm{y}}$) of SDRA are utilized to produce the wideband circular polarization. To generate circular polarization over a broad frequency band, a new technique known as hybrid DRA has been proposed in this article. In this technique, the feeding circuit act as a radiator and also provides feeding to the dielectric resonator which enhances the impedance and axial ratio bandwidth. A 3‐dB axial ratio bandwidth of 26.66% is achieved by the SDRA excited through a rectangular patch united with 50 Ω microstrip line. In order to further increase the axial ratio bandwidth from 26.66% to 48%, a notch is truncated from the rectangular patch. The design antenna prototype has been fabricated and experimentally tested. Experimental results illustrate that the proposed structure has broad impedance and axial ratio bandwidth of 75.86% and 43.75%, respectively, and the entire axial ratio bandwidth fully matched with the impedance bandwidth. The proposed antenna produces a right handed circularly polarized (RHCP) field. By taking the mirror image of the proposed microstrip feeding, the RHCP field is converted into left handed circularly polarized (LHCP) field. This antenna is preferred for wireless applications such as indoors communication, remote sensing, wireless sensor systems and WLAN/WiMAX applications.     

Design of a dual‐polarized omnidirectional antenna for broadband applications

A broadband dual‐polarized omnidirectional antenna is presented. The proposed antenna consists of two parts, an asymmetric biconical antenna and a cylindrical multilayer polarizer. To have an almost perfect omnidirectional radiation pattern in the horizontal plane and the main radiating beam position at around , in the elevation plane, the asymmetric biconical antenna is used. Moreover, to provide dual polarization performance over the 2–18 GHz operational bandwidth, a multilayer polarizer is designed and optimized. Numerous simulations via Ansoft HFSS and CST microwave Studio CAD tools have been made to optimize the radiation pattern, gain, polarization, and the reflection coefficient of the antenna. Simulation results show that the radiation characteristics of the proposed antenna are extremely sensitive to the configuration and dimensional parameters of the multilayer polarizer. The designed antenna was fabricated with high mechanical accuracy and measured. Satisfactory agreement of computer simulations and experimental results was obtained. The main feature that distinguishes this antenna from the previous designs is the ability to provide the omnidirectional radiation pattern with small ripples, dual polarizations performance, and the wide bandwidth simultaneously. Based on these characteristics, the proposed antenna can be useful for broadband communication applications. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:591–600, 2015.     

Dual polarized triple band hybrid MIMO cylindrical dielectric resonator antenna for LTE2500/WLAN/WiMAX applications

In this communication, triple band hybrid multi‐input–multi‐output (MIMO) cylindrical dielectric resonator antenna (CDRA) with high isolation is examined. The proposed MIMO antenna includes two symmetric folded microstrip line feeding structures along with CDRA at two different ends of substrate. Two inverted L‐shaped strips on the ground plane are used to enhance the isolation (S₁₂ < ?15 dB) as well as to generates 2.7 GHz frequency band. Metallic strip on the ground plane act as an electromagnetic reflector and also enhance the isolation between two antennas (S₁₂ < ?20 dB). Archetype of proposed MIMO antenna design has been fabricated and tested to validate the simulated results. The proposed antenna operates at three different frequency bands 2.24–2.38 GHz, 2.5–3.26 GHz, and 4.88–7.0 GHz (S₁₁ < ?6 dB) with the fractional bandwidth 6.06%, 26.4%, and 35.7%, respectively. Folded microstrip lines generate path delay between the electric field lines and originate circular polarization characteristics in the frequency range 5.55–5.75 GHz with the fractional bandwidth of 3.55%. In order to satisfy the different performance requirement of MIMO antenna such as envelop correlation coefficient, mean effective gain, effective diversity gain, peak gain are also examined. The proposed antenna is found suitable for LTE2500, WLAN, and WiMAX applications. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2016.     

Hybrid polarized microstrip antenna for multifrequency application

In this article, a novel single layer, single‐fed ring antenna is analyzed for multiresonance operation in WLAN/Wi‐MAX bands. The antenna geometry consists of a square patch with a dual square ring enclosure which commit multiresonance characteristics. The antenna is excited using electromagnetically from a separate feed patch placed in between the rings. The impedance characteristics are enhanced up to 18% using a unique hourglass type feed patch in between the square rings. The suggested antenna exhibits good return loss at 2.45, 3.5, and 5.8 GHz having bore sight gain response of . Hybrid polarization is comprised with circular polarization and dual‐linear polarization characteristics are investigated in this research work. This antenna was implemented on Arlon's substrate with dielectric constant ?r = 2.55 and substrate thickness h = 1.524 mm. A good axial ratio is achieved with optimized corner truncation.     

Investigation of higher order modes excitation through F‐shaped slot in rectangular dielectric resonator antenna for wideband circular polarization with broadside radiation characteristics

In this article, a wideband circularly polarized rectangular dielectric resonator antenna (RDRA) with broadside radiation characteristics has been proposed. By using modified ground plane having an F‐shaped slot, the proposed structure able to generates three sets of modes i.e., fundamental as well as higher order modes. To obtained circular polarization, an orthogonal mode (TE₁₁₃) in the RDRA has been generated by using the F‐shaped slot on the modified ground plane. The resonance frequency of fundamental mode (TE₁₁₁) in the rectangular dielectric resonator (DR) has been calculated by using dielectric waveguide model method. The same has been confirmed through E‐field distribution in RDRA. Here, wide axial ratio (AR) bandwidth of the proposed antenna is due to the generation of and modes. It is observed that input impedance bandwidth has been broadening with a pair of excited modes ( and modes) in the proposed antenna structure. All these modes have been excited and merged to form a wide input impedance bandwidth and wide AR bandwidth of the designed antenna. The proposed antenna shows measured input reflection coefficient (S₁₁ < ?10 dB) of 50.55% and measured AR bandwidth (AR < 3 dB) of 14.28%. The designed antenna shows left‐handed circular polarization in broadside direction and offering an average gain and radiation efficiency of 4.29 dBic and 92.22% respectively.     

Antenna current optimization for optimal antenna design in different frequency bands using VSO‐NM algorithm

In this article, the antenna partial gain to ‐factor based on the antenna current optimization is used as figure of merit for antenna design proposing an efficient global hybrid technique that combining very simple optimization (VSO) and Nelder‐Mead (NM) algorithm. To validate the strength of the approach, a set of three antennas operating within different frequency bands of super high frequency, submillimeter, and light spectrum are addressed and optimized. The antennas are analyzed completely using finite difference time domain method. The results showed the strength of the approach of optimizing antenna gain to ‐factor based on antenna current optimization using the hybrid VSO‐NM algorithm in different frequency bands. Compared to stand‐alone VSO, the hybrid VSO‐NM algorithm showed the ability to reduce the processing time on average by 58.73% in addition to enhancing the search capability by 43%.     

Design and analysis of wideband U‐slot patch antenna with U‐shaped parasitic elements

A single layer single probe‐fed wideband microstrip antenna is presented and investigated. By cutting a U‐slot in the rectangular patch, and by incorporating two identical U‐shaped parasitic patches around both the radiating edges and the nonradiating edges of the rectangular patch, three resonant frequencies are excited to form the wideband performance. Details of the antenna design is presented. The measured and simulated results are in good agreement, the measured impedance bandwidth is GHz ( GHz), or centered at GHz, which covers WLAN GHz ( GHz), WLAN GHz ( GHz), and WIMAX GHz ( GHz) bands. The measured peak gains at the three resonant frequencies are dB, dB, and dB, respectively. An equivalent circuit model which is based on the transmission line theory, the asymmetric coupled microstrip lines theory, and the π‐network theory is established. This equivalent circuit model is used to give an insight into the wideband mechanism of the proposed antenna, and is also used to explain why the three resonant frequencies shift at the variations of different parameters from a physical point of view. The error analysis is given to demonstrate the validity of the equivalent circuit model.     

Closed form expressions to find the far‐field patterns of an equilateral triangular dielectric resonator antenna for various higher order modes

In this work, an equilateral triangular dielectric resonator antenna (ETDRA) is modeled as a source free dielectric cavity, bounded by perfect magnetic conductor to investigate its radiation characteristics for various ${\mathit{TM}}_{\mathit{mnp}}^{\mathit{z}}$ modes. Closed form compact expressions are provided to compute the far‐zone radiation patterns for different ${\mathit{TM}}_{\mathit{mnp}}^{\mathit{z}}$ modes. Radiated power, quality factor, gain, efficiency, bandwidth, etc. are also investigated. Theoretical far‐field radiation patterns are compared with simulated (HFSS) data for first five modes that is, TM₁₀₁,TM₁₁₁,TM₂₀₁,TM₂₁₁ and TM₃₀₁ modes. Theoretical far‐field patterns are also verified with measured data (our own experimental data and data available, as found in the open literature) for TM₁₀₁,TM₂₀₁ and TM₂₁₁ modes. It is found that three modes out of first five modes produce a peak in the broad‐side direction. From this investigation, it is also found that different ETDRAs having a fixed value of aspect ratio (side length/height) produce almost same radiated powers, Q‐factor, bandwidth, efficiency, etc. for a fixed value of relative permittivity.     

Orthonormal method for compact Global Navigation Satellite Systems antenna array designs

Compact antenna arrays require special considerations at design time not to degrade its efficiency and also the spatial diversity becomes reduced in terms of phase resolution as distance diminishes. Additionally, element radiation patterns are affected and the objective of equally behaved antennas is even more difficult to achieve. However, the induced antenna gain differences can actually be helpful because they can be used to maintain the degrees of freedom in array radiation pattern subspace. In this article, a general analysis on the relationship of efficiency and beam patterns are reviewed to prove that maximum efficiency is achieved when radiation patterns fulfill a given orthogonality condition. Under this condition, we propose to apply a unitary matrix transformation to the array response that can translate the compact antenna array behavior into the equivalent response of a $\frac{\lambda }{2}$‐spaced ideal antenna array without modifying its total efficiency. Consequently, an useful compact antenna array should be designed to have orthogonal radiation beams. Then, applying the transformation, they can be translated to another orthogonal radiation patterns set with only phase differences and a common gain pattern. Simulated results of a computer‐aided design of a practical array of Global Navigation Satellite Systems microstrip antennas are presented.     

Gain enhancement of slot antenna using zero‐index metamaterial superstrate

This article presents a technique to enhance the broadside gain of a CPW fed slot antenna using a single layer metamaterial (MTM) superstrate. A finite array of 3 3 ring unit cell has been designed on both sides of a dielectric substrate to form the MTM superstrate. The gain enhancement is obtained using the zero‐index property of the metamaterial. The broadside gain enhancement for the proposed antenna is 7.4 dB more in comparison to that of the reference slot antenna. The proposed MTM superstrate loaded antenna provides a minimum overall thickness in the context of using ZIM superstrate for gain enhancement of antennas reported in earlier literatures. The overall thickness of the MTM loaded antenna is 0.13λ₀, where λ₀ is the free‐space wavelength at the resonance frequency of the antenna. Also, a high efficiency of about 93.2% is obtained in this case. The loading of the MTM superstrate produces a minimal effect on the cross polarization performance of the proposed slot antenna.     

A novel dual‐wideband inscribed hexagonal fractal slotted microstrip antenna for C‐ and X‐band applications

This paper presents a novel geometry of inscribed hexagonal slotted microstrip antenna for dual‐band performance where the fractal iteration has been made by introducing concentric slots in the patch geometry. Using the equivalence principle and cavity model, the basic geometry of the hexagonal slotted patch is analyzed, and the resonant frequencies of different modes of the patch are computed. Higher‐order modes of the patch antenna are used to obtain dual band. Good performance in terms of the reflection coefficient is proved with the help of parametric analysis. The antenna geometry is simulated using electromagnetic simulation software based on the finite‐element method. The prototype of this antenna is fabricated and tested. The practical results match with the simulated results. The proposed antenna provides improved average gain. The peak values of measured gain are found to be 5.238 and 7.023 dBi—in the two bands 5.85 to 6.48 GHz and 7.28 to 8.63 GHz, respectively. Stable radiation patterns with good average gain make the proposed antenna appropriate for long‐range transmission. Furthermore, low profile and low cost make this antenna suitable for the future point‐to‐point high‐speed wireless communication applications.     

Broadband polarization rotator for arbitrary angles with enhanced substrate integrated waveguide cavities

A broadband polarization rotator for rotating linear polarization to every intended angle is introduced. The proposed rotator is constituted of frequency selective surface and enhanced substrate integrated waveguide (SIW) cavities. Considering the current distribution of circular or square SIW cavity dominant modes, two slots are inserted on the front and back surfaces of the enhanced SIW cavities where the arrows of distributed current are orthogonal to them. Accordingly, the angle between the input and output slots determines the amount of polarization rotation. Moreover, a method of cascading enhanced circular and square SIW cavities for the proposed structure is analyzed to produce a sharper roll‐off response in stop‐bands. Design and simulation of the proposed method are presented for , _, and polarization rotators in Ka frequency band with 35 GHz central frequency. To verify the proposed method, a prototype of polarization rotator is fabricated and measured. The measurement demonstrates 18.8% bandwidth which proves broadband performance of the proposed structure.     

A novel compact self‐similar fractal UWB MIMO antenna

A novel compact self‐similar fractal ultra‐wideband (UWB) multiple‐input‐multiple‐output (MIMO) antenna is presented. This fractal geometry is designed by using iterated function system (IFS). Self‐similar fractal geometry is used here to achieve miniaturization and wideband performance. The self‐similarity dimension of proposed fractal geometry is 1.79, which is a fractional dimension. The antenna consists of two novel self‐similar fractal monopole‐antenna elements and their metallic area is minimized by 29.68% at second iteration. A ground stub of T‐shape with vertical slot enhances isolation and impedance bandwidth of proposed MIMO antenna. This antenna has a compact dimension of 24 × 32 mm² and impedance bandwidth (S₁₁ < ?10 dB) of 9.4 GHz ranging from 3.1 to 12.5 GHz with an isolation better than 16 dB. The various diversity performance parameters are also determined. There is good agreement between measured and simulated results, which confirms that the proposed antenna is acceptable for UWB applications.