Polarization independent dual‐bandpass frequency selective surface for Wi‐Max applications

In this article, the performance of polarization independent dual‐bandpass frequency selective surface (FSS) is investigated. The proposed design of FSS unit cell comprises of metallic structure is based on customized plus shape within plus ring inside a square ring and etched on one side of FR4 substrate. The geometrical dimensions of unit cell are optimized in such a way that the structure possesses the dual‐bandpass characteristic for Wi‐Max applications. The aspect dimensions of unit cell are 0.16 λ × 0.16 λ × 0.013 λ with respect to first resonant frequency. The FSS provide stable response for different angle of incidence in transverse electric and transverse magnetic polarization. An equivalent circuit model of FSS is established and its results are verified by Advanced Design System tool. A prototype of FSS is designed, fabricated and measured. Good agreement between simulated and measured results verifies the dual‐bandpass FSS.     

A compact angularly‐stable frequency selective surface for GSM 900/1800‐MHz shielding using cascaded 2.5‐dimension structure

In this article, a novel compact dual‐band frequency selective surface (FSS) with stable response is proposed for GSM shielding. This FSS is designed using 2‐layer cascaded 2.5‐dimension structure of which element is composed of two via‐based modified swastika unit cells. The proposed structure has created two stop bands around frequency 900 and 1800 MHz, respectively, with maximum attenuation value close to 70 dB. Besides, this FSS performs an excellent miniaturization characteristic with overall size of 0.048λ₀ × 0.048λ₀, where the λ₀ represents the free space wavelength of the lower resonance frequency. More important, this FSS exhibits a very stable frequency response up to 80° for TE and TM polarization. To understand the structure better, the design procedure of this FSS is introduced in detail. Since the proposed FSS has an excellent comprehensive performance, this FSS has great potential in shielding GSM signal for small electronic devices. Finally, a prototype of proposed FSS is fabricated and measured. The measurement results prove the validity of simulation results.     

Compact differential dual‐band bandpass filter using single quad‐mode metal‐loaded dielectric resonator

This letter presents a novel miniaturized differential dual‐band bandpass filter (BPF) using a single quad‐mode metal‐loaded dielectric resonator (DR). The differential dual‐band BPF is designed in a single‐cavity configuration with one quad‐mode DR and four feeding probes, featuring compact size. The rectangular DR is directly mounted on the bottom of the metal cavity and covered by a metal plate on the top surface. It allows two pairs of orthogonal modes (LSE₁₀ and LSM₁₀), which can be differentially excited and coupled by introducing proper perturbation for constructing dual‐band differential‐mode frequency response. To validate the proposed idea, a compact differential BPF with good performance using a quad‐mode DR cavity is designed, fabricated, and measured. The simulated and measured results with good agreement are presented.     

A low profile miniaturized widely‐spaced triband bandpass FSS using coupled resonance

In this article, a triband highly selective widely‐spaced bandpass frequency‐selective surface (FSS) is presented. The proposed FSS is consisted of five metal layers that are separated from each other by four dielectric substrates. Using coupled resonance between layers, three passbands operating at 11.0, 17.4, and 31.9 GHz are achieved. Meanwhile, the dimension of the unit cell of the FSS can be achieved in 0.139λ₀ × 0.139λ₀ (λ₀ is the wavelength of the first resonant frequency in the free‐space), and the overall thickness can be 0.057λ₀, exhibiting miniaturization and low profile characteristics. Due to the proposed FSS can provide multitransmission zeros between two adjacent passbands, the relative bandwidth of the spacing between the second passband and the third passband can reach 58.8% from 17.4 to 31.9 GHz. Thus, a widely spaced response is achieved. In practical, the proposed FSS has an important role in the radio cross‐sectional reduction of some military systems, such as homing head, which can simultaneously detecting mid‐range and long‐range targets. Furthermore, the FSS shows the stable response of angles for both TE and TM polarizations. The equivalent circuit model (ECM) is provided to analysis its operating principle. Finally, a prototype of the proposed FSS is simulated, fabricated and measured. The measured results are in good agreement with the simulation ones.     

A broadband miniaturized ultra‐thin tri‐band bandpass FSS with triangular layout

A tri‐band broadband ultra‐thin miniaturized highly selective bandpass frequency‐selective surface (FSS) has been proposed by using coupled resonance. The proposed FSS is a three‐layer periodic arrays consisting of three metal layers that are separated from each other by two dielectric substrates. Two exterior layers are composed of gridded‐double hexagonal loops (G‐DHLs), while the middle layer is composed of double hexagonal loops (DHLs) structure. The second passband has a relative bandwidth of more than 20%, exhibiting broadband characteristics. Due to the superior bandwidth of the hexagon loop, the design FSS can achieve both broadband and low insertion loss characteristics. The FSS show stable incident angles response and wide out‐of‐band rejection performance over a wide range of incidence angle of 60° for both TE and TM polarizations. The wide and sharp out‐of‐band rejection behavior is caused by multi‐transmission zeros on both sides of each passband. The equivalent circuit model of the FSS is provided to analyze its operating principle. The prototype of this FSS is simulated, fabricated, and measured. The measured results show a good agreement with its theoretical analysis and simulation.     

A triple‐layer dual‐bandpass frequency selective surface of third order response with equivalent circuit analysis

A multilayered cascaded and polarization‐dependent frequency selective surface (FSS) exhibiting dual bandpass frequency response is proposed in this article. The FSS is composed of two metal‐based square patch layers in the two ends and one aperture type layer in the middle, separated by two dielectric substrates. The FSS exhibits bandpass response of third order with two transmission poles in the 5‐6 GHz band and one pole at 2.5 GHz. The passbands are separated well enough with a transmission zero at 3.5 GHz leading to significant out‐of‐band rejection. The structure is ultrathin with the thickness on the order of 0.01λ₀ with respect to the lowest resonating frequency. It is shown with parametric studies how the poles can be tuned individually. Principle of operation of the FSS is explained with its equivalent circuit model. Transmission phase of the FSS varies linearly with frequency in the upper band. Simulation result is verified experimentally for the fabricated prototype.     

Dual‐passband bandpass‐filtering power divider using half‐mode substrate integrated waveguide resonator with high frequency selectivity

In this paper, a half‐mode substrate integrated waveguide (HMSIW) power divider with bandpass response and good frequency selectivity is proposed. The proposed power divider includes input/output microstrip lines, four HMSIW resonators, cross‐coupling circuits, and an isolation resistor. The dual‐band bandpass‐filtering response is obtained by using the dual‐mode slotted HMSIW. To get good frequency selectivity, the input/output cross‐coupling circuits have been used, and several transmission zeros can be observed. A dual‐band filtering‐response HMSIW power divider is designed, fabricated and measured. The total size of the fabricated power divider is 0.58λg × 0.45λg. The measured results show a reasonable agreement with the simulated ones. The measured central operating frequencies of the dual‐band HMSIW power divider are at 2.43 and 3.50 GHz, respectively. The measured 3‐dB fractional bandwidth is about 13.3% and 6.3% in the two passbands, and the measured output isolation is about 20 dB.     

Dual‐mode resonator with modified dual‐square‐Loop for WLAN and WiMAX quad‐band filter design

We propose the improved configurations with dual‐mode dual‐square‐loop resonators (DMDSLR) for quad‐band bandpass filter (BPF) design. The modified DMDSLR filter employs two sets of the loops. The square loop is designed to operate at the first and third resonated frequencies (2.4/5.22 GHz) and the G‐shaped loop is employed at the second and fourth resonated frequencies (3.59/6.6 GHz). The resonant frequency equations of DMDSLR are introduced for simply designing quad‐band BPF. Resonant frequencies can be controlled by tuning the perimeter ratio of the square loops. A systematic design procedure with the design map is applied for accuracy design. To obtain lower insertion loss, higher out‐of‐band rejection level and wider bandwidth of quad‐band, the miniaturized DMDSLR with meander‐line technique is proposed. The proposed filters are successfully simulated and measured showing frequency responses and current distributions. It can be applied to WLAN and WiMAX quad‐band systems. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:332–340, 2014.     

Ultrawideband high‐gain dual‐polarized antenna with anti‐interference capability

In this article, a high‐gain dual‐polarized antenna with band‐rejection capability for ultrawideband (UWB) applications is proposed. Tapered dipoles are chosen as a primary radiator to achieve UWB operation and it is reflected by a metallic cavity reflector for high gain radiation. A notch at WLAN band is realized by etching a set of four bent slots in the radiating elements. The measured results demonstrate that the proposed design with overall dimensions of 0.69λ _L × 0.69λ _L × 0.16λ _L (λ _L is free‐space wavelength at the lowest operating frequency) has operating bandwidth of 95.1% (3.2‐9.0 GHz) and the rejected frequency band from 5.0 to 5.9 GHz. Additionally, good unidirectional radiation patterns with a broadside gain from 8.1 to 11.5 dBi and radiation efficiency of better than 90% are also achieved.     

Compact quad‐channel high‐temperature superconducting diplexer based on stub‐loaded square ring resonator

A compact quad‐channel high‐temperature superconducting diplexer based on stub‐loaded square ring resonator (S‐LSRR) is proposed. The proposed resonator consists of a square ring with symmetrically loaded two open‐circuited stubs and provides four resonant modes for quad‐channel applications. Even‐ and odd‐mode methods are applied to analyze the S‐LSRR. Analytical study shows that four resonant modes of one S‐LSRR can be designed in two pairs and applied to construct two of four channels of the designed diplexer. A square patch is added to the resonator for providing an additional parameter to tune the resonant modes. Based on the proposed resonator, a quad‐channel diplexer with center frequencies of 2.4, 3.2, 3.9, and 5.6 GHz is designed. For demonstration, the diplexer is fabricated on 2‐in‐diameter 0.5 mm‐thick MgO wafer with double sided YBa₂Cu₃O_y films and measured at 77 K. Good agreement between the simulation and measurement is obtained. The diplexer has a compact size of 0.25 λ_g × 0.45 λ_g, where λ_g is guided wave length at the center frequency of first channel.     

An angular‐stable multi‐layer reconfigurable frequency selective surface based on varactor with wide tuning range

An angular‐stable multi‐layer reconfigurable frequency selective surface (FSS) based on varactor with wide tuning range is proposed in this article. The working principle of the FSS is analyzed by the equivalent circuit model (ECM). By tuning the DC bias voltage applied to the varactors loaded on the top and bottom layers, the pass band of the FSS can be located in the C, X, and Ku band respectively with a wide reconfigurable range. In addition, due to the introduction of the miniaturized structure and the four metal vias in Z‐direction, the FSS provides good angular stability under TE and TM polarization. Finally, the fabrication and experiment are provided to verify the validity of the reconfigurable FSS.     

Wideband and spurious‐suppressed differential bandpass filter based on strip‐loaded slot‐line structure

In this article, a wideband and spurious‐suppressed differential bandpass filter based on strip‐loaded slot‐line structure is presented. By means of the differential microstrip‐slot‐line‐microstrip transition, the proposed filter has a wideband bandpass filtering response. Simultaneously, the utilization of the strip‐loaded slot‐line extends its upper stop‐band. The proposed bandpass filter has wider upper‐stopband, wideband bandpass response, and intrinsic high common‐mode (CM) suppression. To verify the design concept, one filter example has been designed, fabricated, and measured. It has a differential‐mode (DM) 3‐dB fractional bandwidth of 157% with a low 0.82 dB minimum insertion loss. What's more, it shows a very wide 20 dB DM stop‐band bandwidth of 6.5 f_0d. The experienced results are in good agreement with the theoretical and simulated results.     

A novel miniaturized frequency selective surface

A novel single layer miniaturized frequency selective surface made of circular unit cell elements is presented in this article. The frequency selective surface (FSS) unit cell measures 0.055λ₀ × 0.055λ₀, where λ₀ corresponds to its free space wavelength. The proposed FSS offers band stop characteristics with bandwidth of 137.5 MHz centered at 1.39 GHz. The symmetrical structure of the unit cell elements provides polarization independency. The miniaturized unit cell elements help achieving angular independency for both TE and TM mode of polarization. The miniaturized design provides excellent angular independency with negligible frequency shift for varying incident angles. A prototype of the FSS is fabricated and its simulation results are validated using measurements.     

Frequency‐selective rasorber with two low insertion loss transmission bands

A frequency‐selective rasorber (FSR) with two low insertion loss transmission bands is proposed. The FSR is composed of the resistive sheet layer at the top and bandpass FSS layer at the bottom, and separated by air spacer. Full‐wave simulation results show that the FSR realize two transmission bands at frequencies 8.5 GHz and 10.8 GHz with 0.45 dB and 0.77 dB insertion loss. Meanwhile, the band with |S₁₁| < ?10 dB is over 4.2‐8.8 GHz and 9.2‐17.4 GHz. Compared with the reported FSR with two transmission bands, the proposed FSR in this article achieves two transmission bands with lower insertion loss and wide absorption band at high frequencies. To validate the performance of the proposed FSR, the samples are fabricated and measured, reasonable agreement between simulated and measured results is achieved.     

Eighth‐mode SIW based compact high gain leaky‐wave antenna

In this article, a novel electrically small eighth‐mode substrate integrated waveguide (EMSIW) based leaky‐wave antenna (LWA) in planar environment is presented. The proposed antenna uses 1/8th mode SIW resonator which helps to improve compactness of the design while maintaining high gain and increased scanning angle. The proposed SIW cavity is excited by a 50 Ω microstrip line feeding to resonate at dominant TE₁₁₀ mode in X‐band. The dimensions of the resonators are adjusted to keep resonant mode at same frequency. The fabricated prototype is approximately 5λ₀ long. Measured results show that the proposed leaky‐wave antenna is able to operate within frequency range of 8‐10 GHz with beam scanning range of 51° and maximum gain of 13.31 dBi.     

Compact dual‐ and triband bandpass filter using frequency selecting coupling structure loaded stepped‐impedance resonator

This article presents two novel resonators, that is, frequency selecting coupling structure loaded stepped‐impedance resonator (FSCSLSIR) and π‐section loaded FSCSLSIR. The resonator behaviors and guidelines are given to design FSCSLSIR dual‐band bandpass filter (BPF) and π‐section loaded FSCSLSIR triband BPF. The proposed dual‐ and triband BPF have very compact sizes of 0.13 λ_gd × 0.06 λ_gd and 0.115 λ_gt × 0.074 λ_gt, respectively. Moreover, good return loss, low insertion loss, and high band‐to‐band isolation can be observed, and the proposed FSCSLSIR dual‐band BPF has an ultrawide stopband from 5.79 to 36 GHz. The experimental results are in good agreement with the simulations. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:427–435, 2015.     

3D FSS polarizer for millimeter‐wave antenna applications

In this article, a novel wideband polarizer is presented, to convert the linear polarization of a directive antenna into circular polarization. This innovative polarizer is based on a 3D frequency selective surface (FSS) and consists of an array of 4×4 metal axial‐mode helices. The proposed broadband polarizer operates in the 28 to 31 GHz frequency band. To demonstrate the principle, the 3D FSS is applied to a linearly polarized Yagi‐Uda antenna operating in the same millimeter‐wave frequency band. The measured and simulated results, by integrating the proposed 3D polarizer in front of the antenna, show that an axial ratio smaller than 3 dB is obtained over a wide bandwidth with gain enhancement.     

Ultrathin dual‐layer triple‐band flexible microwave metamaterial absorber for energy harvesting applications

An ultrathin dual‐layer flexible metamaterial absorber with triple‐band for RF energy harvesting applications has been reported in this article. The sub‐wavelength unit cell of the proposed absorber is composed of six distinct concentric annular having outer circumference of ring and octagonal inner circumference. The metallic resonators are constructed from copper foil self‐adhesive tape which are affixed on flexible neoprene rubber sheet terminated by metal ground plate. The proposed absorber prototype is ultrathin and compact with the thickness less than 0.037λ₀ and cell size less than 0.2λ₀ at the lower absorption frequency of 1.75 GHz. Flexible dual‐layer absorber exhibits triple absorption peaks of 96.91%, 96.41% and 90.12% at 1.75 GHz, 2.17 GHz and 2.6 GHz with full width at half maximum (FWHM) bandwidth of about ~6.5%. The RF performance of proposed absorber is numerically computed for different polarization and incidence angle variations. The absorption value is above 76% for the oblique incidence angle up to 45° in TE mode operation, whereas the absorption value is 94% for oblique incidence angle up to 60° in TM mode operation. The measured outcomes are in agreement with the numerically calculated results. The energy harvesting potential of the proposed absorber structure is numerically confirmed by the resulting improved RF absorption value in dependence to different resistive loading of the polarization insensitive unit cells.     

Compact ultrathin conformal metamaterial dual‐band absorber for curved surfaces

A compact, ultrathin conformal metamaterial dual‐band absorber for curved surfaces has been presented in this article. The absorber unit cell composed of circular and split ring resonators which are connected with plus‐shaped structure. The proposed absorber unit cell is compact in size (0.22λ_o × 0.22λ_o) and as well as ultrathin thickness (0.006λ_o), where λ_o is the wavelength at 5.8 GHz. The designed absorber gives two absorption tips at 5.8 and 7.7 GHz with more than 90% absorptivity. The full width at half maximum bandwidths are 220 MHz (5.67‐5.89 GHz) and 250 MHz (7.58‐7.83 GHz). The proposed conformal absorber is sensitive to the polarization angle and has a stable absorptivity over a wide range of incident electromagnetic wave. The parametric analysis and equivalent transmission line model have been investigated. The surface current and electric field distribution also discussed for understanding the absorption mechanism. To analyze the performance of proposed absorber on the curved surfaces, it is wrapped on the different radius of cylindrical surface and measured the absorptivity. Simulated and measured results have good agreement between them.