一类非线性系统的变负荷预测控制

生产过程的变负荷运行使得其非线性动态特性的影响凸显。针对变负荷生产过程中机理模型为常微分方程或半显式Heisenberg微分-代数方程的一类非线性动态系统,采用非线性预测控制算法,构造出稳态优化与动态优化的两层控制结构,并采用联立法进行优化数值求解。最后对化工过程的夹套CSTR进行仿真验证,表明该算法的有效性。     

Non‐Linear Model Predictive Control: A Personal Retrospective

An overview of non‐linear model predictive control (NMPC) is presented, with an extreme bias towards the author's experiences and published results. Challenges include multiple solutions (from non‐convex optimization problems), and divergence of the model and plant outputs when the constant additive output disturbance (the approach of dynamic matrix control, DMC) is used. Experiences with the use of fundamental models, multiple linear models (MMPC), and neural networks are reviewed. Ongoing work in unmeasured disturbance estimation, prediction and rejection is also discussed.     

Differential recurrent neural network based predictive control

In this paper an efficient algorithm to train general differential recurrent neural network (DRNN) is developed. The trained network can be directly used in the nonlinear model predictive control (NMPC) context. The neural network is represented in a general nonlinear state-space form and used to predict the future dynamic behavior of the nonlinear process in real time. In the new training algorithms, the ODEs of the model and the dynamic sensitivity are solved simultaneously using Taylor series expansion and automatic differentiation (AD) techniques. The same approach is also used to solve the online optimization problem in the predictive controller. The efficiency and effectiveness of the DRNN training algorithm and the NMPC approach are demonstrated through a two-CSTR case study. A good model fitting for the nonlinear plant at different sampling rates is obtained using the new method. A comparison with other approaches shows that the new algorithm can considerably reduce network training time and improve solution accuracy. The DRNN based NMPC approach results in good control performance under different operating conditions.     

On‐Line PEMFC Control Using Parameterized Nonlinear Model‐Based Predictive Control

In this work, a fast nonlinear model‐based predictive control (NMPC) strategy is designed and experimentally validated on‐line on a real fuel cell. Regarding NMPC strategies, the most challenging part remains to achieve on‐line implementation, especially when dealing with fast dynamic systems. As previously demonstrated in a recent work, the proposed control strategy is ideally suited to address this problem. Indeed, it is 30 times faster than classical NMPC controllers. This strategy relies on a specific parameterization of the control actions to reduce the computational time and achieve on‐line implementation. Due to its short computational time compared to mechanistic models, an artificial neural network model is designed and experimentally validated. This model is employed as internal model in the NMPC controller to predict the system behavior. To confirm the applicability and the relevance of the proposed NMPC controller varying control scenarios are investigated on a test bench. The built‐in controller is overridden and the NMPC controller is implemented externally and executed on‐line. Experimental results exhibit the outstanding tracking capability and robustness against model‐process mismatch of the proposed strategy. The parameterized NMPC controller turns out to be an excellent candidate for on‐line applications.     

Nonlinear model predictive control: current status and future directions

Linear model predictive control (LMPC) is well established as the industry standard for controlling constrained multivariable processes. A major limitation of LMPC is that plant behavior is described by linear dynamic models. As a result, LMPC is inadequate for highly nonlinear processes and moderately nonlinear processes which have large operating regimes. This shortcoming coupled with increasingly stringent demands on throughput and product quality has spurred the development of nonlinear model predictive control (NMPC). NMPC is conceptually similar to its linear counterpart except that nonlinear dynamic models are used for process prediction and optimization. The purpose of this paper is to provide an overview of current NMPC technology and applications, as well as to propose topics for future research and development. The review demonstrates that NMPC is well suited for controlling multivariable nonlinear processes with constraints, but several theoretical and practical issues must be resolved before widespread industrial acceptance is achieved.     

Control Parameterization‐Based Adaptive Particle Swarm Approach for Solving Chemical Dynamic Optimization Problems

A control parameterization‐based particle swarm optimization (CP‐PSO) approach is presented which combines control parameterization with particle swarm optimization to solve dynamic optimization problems in chemical engineering. To improve search efficiency and convergence rate, a control parameterization‐based adaptive particle swarm optimization (CP‐APSO) approach is proposed, in which inertia weight and acceleration coefficients are updated according to population distribution characteristics. Three benchmark chemical dynamic optimization problems are explored as illustration. The results demonstrate that CP‐APSO is efficient for solving a general class of chemical dynamic optimization problems and CP‐APSO largely outperforms CP‐PSO on the convergence rate.     

NONLINEAR MODEL PREDICTIVE CONTROL

Nonlinear Model Predictive Control (NMPC), a strategy for constrained, feedback control of nonlinear processes, has been developed. The algorithm uses a simultaneous solution and optimization approach to determine the open-loop optimal manipulated variable trajectory at each sampling instant. Feedback is incorporated via an estimator, which uses process measurements to infer unmeasured state and disturbance values. These are used by the controller to determine the future optimal control policy. This scheme can be used to control processes described by different kinds of models, such as nonlinear ordinary differential/algebraic equations, partial differential/algebraic equations, integra-differential equations and delay equations. The advantages of the proposed NMPC scheme are demonstrated with the start-up of a non-isothermal, non-adiabatic CSTR with an irreversible, first-order reaction. The set-point corresponds to an open-loop unstable steady state. Comparisons have been made with controllers designed using (1) nonlinear variable transformations, (2) a linear controller tuned using the internal model control approach, and (3) open-loop optimal control. NMPC was able to bring the controlled variable to its set-point quickly and smoothly from a wide variety of initial conditions. Unlike the other controllers, NMPC dealt with constraints in an explicit manner without any degradation in the quality of control. NMPC also demonstrated superior performance in the presence of a moderate amount of error in the model parameters, and the process was brought to its set-point without steady-state offset.     

基于全局正交配置的非线性预测控制算法

针对非线性预测控制(NMPC)在线优化计算量大这一关键问题,提出一种基于全局正交配置的非线性预测控制算法。该算法以高阶插值正交多项式为基函数同时配置优化时域内的状态变量和控制变量,将连续动态优化问题转化为非线性规划问题(NLP)求解。全局正交配置可以使用较少的配置点而获得较高的逼近精度,这样即使NMPC使用很长的优化时域,离散化后得到的NLP问题的规模也比较小,能够有效地降低在线优化计算量。最后,以连续聚合反应过程为例验证了算法的有效性。     

Active design of dynamic GP models for model predictive control using expected improvement

Modelling is a basic and key requirement for model-based controlling, monitoring, or other process strategies. In non-linear model predictive control (NMPC), although data-driven models can be more easily established than first-principle ones, representative data may not be adequately included in advance to train a complete model, which is an attractive research topic. An actively improved Gaussian process (GP) model building strategy is developed, especially for incomplete models based on the idea of Bayesian optimization. The GP model can be used online as the internal model of model predictive control (MPC) directly. The model-building objective is based on the expected improvement strategy, which can exploit information gained from the currently gathered data as well as explore uncharted regions. The proposed method is a real-time design of experiments based on variance information of GP for efficient model building with insufficient initial training data for NMPC. Multi-step ahead prediction model is considered to give full play to predicting features of NPMC. Besides, a novel disturbance rejection strategy is also proposed based on GP outputs. Two simulation results, including comparisons with some traditional algorithms, are presented to demonstrate the effectiveness of the proposed method.     

Considerations on nonlinear model predictive control techniques

The nonlinear model predictive control (NMPC) is an on-line application based on nonlinear convolution models. It is an appealing control methodology, but it is difficult to implement and its solution is not so performing since it unavoidably means to solve a usually large-scale, constrained, and multidimensional optimization. To increase the difficulty, this optimization problem is subject to computationally heavy differential and algebraic constraints constituting the same convolution model and the least squares nature of the objective function easily leads to narrow valleys and multimodality issues.Beyond a short review of the state-of-the-art, the paper is aimed at highlighting the possibility to exploit at best the intrinsic features of the specific system one is going to control using the NMPC. The idea is to give the NMPC the possibility to automatically select the best combination of algorithms (differential solvers and optimizers) in accordance with the specific problem to be solved. From this perspective, the NMPC could be easily extended to many scientific fields traditionally far from process systems and computer-aided process engineering and the user has not to worry about which specific differential solvers and optimizers are needed to solve his/her problem.     

NMPC of an industrial crystallization process using model-based observers

This paper illustrates the benefits of a nonlinear model-based predictive control (NMPC) approach applied to an industrial crystallization process. This relevant approach proposes a setpoint tracking of the crystal mass. The controlled variable, unavailable, is obtained using an extended Luenberger observer. A neural network model is used as internal model to predict process outputs. An optimization problem is solved to compute future control actions taking into account real-time control objectives. The performances of this strategy are demonstrated via simulation in cases of setpoint tracking and disturbance rejection. The results reveal a significant improvement in terms of robustness and energy efficiency.     

Nonlinear MPC for fed-batch multiple stages sugar crystallization

This paper addresses the issue of developing feasible advanced control strategies for the operation of industrial fed-batch multi-stage sugar crystallization processes. The operation of such processes poses very challenging problems mainly those inherent to its batch nature and also those due to the difficulties in measuring key process variables. Inadequate control policies lead to out-of-spec batches, with consequent losses resulting from the need of product recycling.In order to address these problems, a modification of the general Nonlinear Model Predictive Control (NMPC) is proposed in this paper, where the NMPC is executed only when the tracking error is outside a pre-specified bound α. Once the error converges towards the α-strip, the NMPC is switched off and the control action is kept constant. In order to further reduce the complexity of the control system, the proposed modification, termed Error Tolerant MPC (ETMPC), is provided with a Recurrent Neural Network (RNN) predictive model. The ETMPC + RNN control scheme was extensively tested on a crystallizer dynamic simulator, tuned with data from two industrial units, and compared with the classical NMPC and PI strategy. The results demonstrate that both NMPC and ETMPC controllers lead to improved end point process specifications, when compared with the PI controller. The explicit introduction of the error tolerance in the optimization relaxes the computational burden and can complement several other suggestions in the literature for feasible industrial real time control.     

Rotary Dryer Control Using a Grey-Box Neural Model Scheme

The application of a Grey-box Neural Model (GNM) in a nonlinear model predictive control scheme (NMPC) of a direct rotary dyer is presented in this work. The GNM, which is based on the combination of phenomenological models and empirical artificial neural network (ANN) models, was properly developed and validated by using experimental fish-meal rotary drying information. The GNM was created by combining the rotary dryer mass and energy balances and a feed forward neural network (FFNN), trained off-line to estimate the drying rate and the volumetric heat transfer coefficient. The GNM results allowed us to obtain the relation between the controlled variable (solid moisture content) and the manipulated variable (gas phase entrance temperature) used in the predictive control strategy. Two NMPC control strategies, one with a fixed extended prediction horizon and another with an extended range prediction horizon, were applied to a simulated industrial fish-meal drying process. The results showed that a correct rotary dryer representation can be obtained by using a GNM approach. Due to the representation capability of the GNM approach, excellent control performances of the NMPCs were observed when the process variables were subject to disturbances. As analyzed in this work, the fixed extended prediction horizon MPC surpassed recognized control methodologies (quadratic dynamic matrix control).     

Simultaneous optimization and control for polypropylene grade transition with two-layer hierarchical structure

In this paper, a two-layer hierarchical structure of optimization and control for polypropylene grade transition was raised to overcome process uncertain disturbances that led to the large deviation between the open-loop reference trajectory and the actual process. In the upper layer, the variant time scale based control vector parametric methods (VTS-CVP) was used for dynamic optimization of transition reference trajectory, while nonlinear model predictive controller (NMPC) based on closed-loop subspace and piece-wise linear (SSARX-PWL) model in the lower layer was tracking to the reference trajectory from the upper layer for overcoming high-frequency disturbances. Besides, mechanism about trajectory deviation detection and optimal trajectory updating onlinewere introduced to ensure a smooth transition for the entire process. The proposed method was validated with the real data from an industrial double-loop propylene polymerization reaction process with developed dynamic mechanismmathematicalmodel.     

Model based control of a liquid swelling constrained batch reactor subject to recipe uncertainties

This work presents the application of nonlinear model predictive control (NMPC) to a simulated industrial batch reactor subject to safety constraint due to reactor level swelling, which can occur with relatively fast dynamics. Uncertainties in the implementation of recipes in batch process operation are of significant industrial relevance. The paper describes a novel control-relevant formulation of the excessive liquid rise problem for a two-phase batch reactor subject to recipe uncertainties. The control simulations are carried out using a dedicated NMPC and optimization software toolbox OptCon which implements efficient numerical algorithms. The open-loop optimal control problem is computed using the multiple-shooting technique and the arising nonlinear programming problem is solved using a sequential quadratic programming (SQP) algorithm tailored for large-scale problems, based on the freeware optimization environment HQP. The fast response of the NMPC controller is guaranteed by the initial value embedding and real-time iteration technologies. It is concluded that the OptCon implementation allows small sampling times and the controller is able to maintain safe and optimal operation conditions, with good control performance despite significant uncertainties in the implementation of the batch recipe.     

Multistage nonlinear model predictive control for pumping treatment in hydraulic fracturing

Hydraulic fracturing has gained increasing attention as it allows the constrained natural gas and crude oil to flow out of low-permeability shale formations and significantly increase production. Perilous operating states of extremely high pressure also raise some safety concerns, requiring us to formulate an appropriate dynamic model, and provide a careful engineering control to ensure safe operating conditions. Moreover, uncertainties due to spatially varying rock properties increase the difficulties in control of the fracturing process. In this work, we formulate a first-principles model by considering the fracture evolution, mass transport of substances in the slurry, changing fluid properties, and the monitored operating pressure on the ground level. Next, we implement nonlinear model predictive control (NMPC) to control the process under a set of final requirements and process constraints. Our results show that the performance of standard NMPC degrades when the rock uncertainty causes the parameter mismatch between the process and the predictive model in the controller. With standard NMPC, designed with a nominal model, the process fails to meet the terminal requirements of fracture geometry, and pressure is violated in one of the parameter mismatch cases. Therefore, we resort to multistage NMPC, which considers uncertainty evolution in a scenario tree with separate control sequences to address constraint violations. We demonstrate that multistage NMPC presents good performance by showing constraint satisfaction whether the uncertain rock parameter realization is time-invariant or time-variant. We also simulate the process with multistage NMPC including different numbers of scenarios and compare their control performance. Our investigation demonstrates that multistage NMPC effectively manages parametric uncertainties attributed to non-homogeneous rock formation, and provides a promising control strategy for the hydraulic fracturing process.     

Nonlinear model predictive control for dividing wall columns

Dividing wall columns (DWCs) are practical, effective, and promising among distillation process intensification technologies. Nonlinear model predictive control (NMPC) schemes are developed in this study to control the three-product DWCs. As these systems are intensely interactive and highly nonlinear, NMPC may be more suitable than the traditional PI control. The model is established based on Python and Pyomo platforms. As the original mathematical model of the column section is ill-posed, index reduction is used to avoid a high-index differential-algebraic equation (DAE) system. The well-posed index-1 system after index reduction is employed for the steady-state simulation and dynamic control in this study. Case studies with three DWC configurations to separate the mixture of ethanol (A), n-propanol (B), and n-butanol (C) show that the NMPC performs very well with small maximum deviations and short settling times. This demonstrates that the NMPC is a feasible and very effective scheme to control three-product DWCs.     

Dynamic optimization oriented modeling and nonlinear model predictive control of the wet limestone FGD system

Nonlinear model predictive control (NMPC) scheme is an effective method of multi-objective optimization control in complex industrial systems. In this paper, a NMPC scheme for the wet limestone flue gas desulphurization (WFGD) system is proposed which provides a more flexible framework of optimal control and decision-making compared with PID scheme. At first, a mathematical model of the FGD process is deduced which is suitable for NMPC structure. To equipoise the model's accuracy and conciseness, the wet limestone FGD system is separated into several modules. Based on the conservation laws, a model with reasonable simplification is developed to describe dynamics of different modules for the purpose of controller design. Then, by addressing economic objectives directly into the NMPC scheme, the NMPC controller can minimize economic cost and track the set-point simultaneously. The accuracy of model is validated by the field data of a 1000 MW thermal power plant in Henan Province, China. The simulation results show that the NMPC strategy improves the economic performance and ensures the emission requirement at the same time. In the meantime, the control scheme satisfies the multiobjective control requirements under complex operation conditions (e.g., boiler load fluctuation and set point variation). The mathematical model and NMPC structure provides the basic work for the future development of advanced optimized control algorithms in the wet limestone FGD systems.     

Simultaneous process synthesis and control design under uncertainty: A worst‐case performance approach

A new methodology that includes process synthesis and control structure decisions for the optimal process and control design of dynamic systems under uncertainty is presented. The method integrates dynamic flexibility and dynamic feasibility in a single optimization formulation, thus, reducing the costs to assess the optimal design. A robust stability test is also included in the proposed method to ensure that the optimal design is stable in the presence of magnitude‐bounded perturbations. Since disturbances are treated as stochastic time‐discrete unmeasured inputs, the optimal process synthesis and control design specified by this method remains feasible and stable in the presence of the most critical realizations in the disturbances. The proposed methodology has been applied to simultaneously design and control a system of CSTRs and a ternary distillation column. A study on the computational costs associated with this method is presented and compared to that required by a dynamic optimization‐based scheme. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2497–2514, 2013     

Inferential Control of Reactive Destillation Columns – An Algorithmic Approach

Decentralized control system design comprises the selection of a suitable control structure and controller parameters. Here, mixed integer optimization is used to determine the optimal control structure and the optimal controller parameters simultaneously. The process dynamics is included explicitly into the constraints using a rigorous nonlinear dynamic process model. Depending on the objective function, which is used for the evaluation of competing control systems, two different formulations are proposed which lead to mixed‐integer dynamic optimization (MIDO) problems. A MIDO solution strategy based on the sequential approach is adopted in the present paper. Here, the MIDO problem is decomposed into a series of nonlinear programming (NLP) subproblems (dynamic optimization) where the binary variables are fixed, and mixed‐integer linear programming (MILP) master problems which determine a new binary configuration for the next NLP subproblem. The proposed methodology is applied to inferential control of reactive distillation columns as a challenging benchmark problem for chemical process control.