Optimization of Continuous Synthesis of Cross‐Linked Chitosan Nanoparticles Using Microreactors

A process for continuous synthesis of cross‐linked chitosan‐sodium tripolyphosphate (CS‐TPP) nanoparticles is optimized using microreactors for its comparison with a batch stirred reactor. The effect of various parameters including residence time, concentration of CS, pH of the CS solutions, and stabilizing surfactant concentration was modeled by population balance equations (PBEs) to determine size, growth, and nucleation rates of the CS‐TPP nanoparticles. The smallest particle size was obtained at lower residence time, lower concentration of CS, pH 5, and using a surfactant concentration above its critical micellar concentration. The particles obtained from the microreactors are agglomerated but are smaller in size as compared to those obtained from the batch reactor. The system was also optimized for the minimum particle size applying the estimated growth rate and the PBEs.     

Bishydrazinium and Diammonium Salts of 4,4′,5,5′‐Tetranitro‐2,2′‐biimidazolate (TNBI): Synthesis and Properties

The diammonium ( 1 ) and bishydrazinium ( 2 ) salts of 4,4′,5,5′‐tetranitro‐2,2′‐biimidazolate (TNBI) were synthesized and their physical properties as well as predicted explosive performance characteristics are described. These dianionic salts are easily formed in good yields by reaction of TNBI with aqueous solutions of the cationic species. TNBI is synthesized from 2,2′‐biimidazole, which is ultimately synthesized by the condensation of aqueous glyoxal with ammonium acetate. The compounds were characterized by NMR spectroscopy, vibrational (FT‐IR and Raman) spectroscopy, elemental analysis, thermal analysis (DSC, VTS and calorimetry), and small scale safety testing (impact, friction, ESD). The measured densities and heats of formation are reported. The materials show promise for use in IM explosive and propellant formulations due to the combination of their calculated performances, thermal stability and insensitivity to stimuli.     

Proton Conducting Membranes Based on Poly(2,2′‐imidazole‐5,5′‐bibenzimidazole)

Poly(2,2′‐imidazole‐5,5′‐bibenzimidazole) (PBI‐imi) was synthesized via the polycondensation between 3,3′,4,4′‐tetraaminobiphenyl and 4,5‐imidazole‐dicarboxylic acid. Effects of the reaction conditions on the intrinsic viscosity of the synthesized polymers were studied. The results show that the molecular weight of the polymers increases with increasing monomer concentration and reaction time, and then levels off. With higher reaction temperature, the molecular weight of the polymer is higher. With the additional imidazole group in the backbone, PBI‐imi shows improved phosphoric acid doping ability, as well as a little higher proton conductivity when compared with widely used poly[2,2′‐(m‐phenylene)‐5,5′‐bibenzimidazole] (PBI‐ph).Whereas, PBI‐imi and PBI‐ph have the similar chemical oxidation stability. PBI‐imi/3.0 H₃PO₄ composite membranes exhibit a proton conductivity as high as 10^–4 S cm^–1 at 150 °C under anhydrous condition. The temperature dependence of proton conductivity of acid doped PBI‐imi can be modeled by an Arrhenius equation.     

Synthesis of 5,5′‐Diformyl‐2,2′‐difuran from 2‐Furfural by Photochemical Aryl Coupling

The synthesis of 5,5′‐diformyl‐2,2′‐difuran (IUPAC name: [2,2′‐bifuryl]‐5,5′‐dicarbaldehyde) in good yields by the intermolecular coupling of 2‐furfural and 5‐bromo‐2‐furfural has been achieved. Optimum yields were obtained when mixtures of the substrates in acetonitrile were treated with polyvinylpyridine powder (Reillex 402), and irradiated with UV light through a quartz filter. Low yields of coupling product were obtained in the absence of this base or if hydrocarbon solvents were used. A mechanistic pathway involving a transient exciplex intermediate has been proposed.     

Synthesis and Characterization of 4,4′,5,5′‐Tetranitro‐2,2′‐Bi‐1H‐imidazole (TNBI)

We synthesized 4,4′,5,5′‐tetranitro‐2,2′‐bi‐1H‐imidazole (TNBI), which may serve as a new energetic filler for high explosive formulations. TNBI was synthesized by treating an excess amount of sodium nitrate with 2,2′‐bi‐1H‐imidazole (BI), which was produced from glyoxal and ammonia gas. The overall synthetic yield was 32%. The synthesized TNBI was characterized by performing various chemical analyses including NMR, IR, and CHN analyses. Small scale sensitivity tests were carried out at both research institutes (ADD and ARDEC). The sensitivity results varied from ‘more sensitive than RDX’ to ‘substantially less sensitive than RDX’ according to the purity and conditions of the test samples. Based on our careful characterizations, this large variation in sensitivity was attributed to the moisture content that was present in the test samples due to a hygroscopic nature of TNBI. We also found that the hygroscopic nature of TNBI changed significantly due to the amount of impurities, especially sulfates.     

Synthesis and Energetic Properties of 4,4′,5,5′‐Tetranitro‐2,2′‐biimidazolate(N4BIM) Salts

This paper describes the synthesis and characterization of several salts of 4,4′,5,5′‐tetranitro‐2,2′‐biimidazolate (N4BIM). Each of the salts were characterized chemically, thermally, morphologically, as well as with respect to destructive stimuli (impact, electrostatic discharge, friction, thermal). These salts show promise as propellant ingredient additives, and in particular, the bis‐triaminoguanidinium salt of N4BIM displays excellent burn rate and combustion behavior. Our combustion studies have shown that TAGN4BIM displays a fast burning rate and has the lowest pressure dependence exponent yet measured for a triaminoguanidinium salt.     

Synthesis and properties of new aromatic polyimides based on 2,2′‐dibromo‐4,4′,5,5′‐benzophenone tetracarboxylic dianhydride

New polyimides with enhanced thermal stability and high solubility were synthesized in common organic solvents from a new dianhydride, 2,2′‐dibromo‐4,4′,5,5′‐benzophenone tetracarboxylic dianhydride (DBBTDA). DBBTDA was used as monomer to synthesize polyimides by using various aromatic diamines. The polymers were characterized by IR and NMR spectroscopy and elemental analysis. These polyimides had good inherent viscosities in N‐methyl‐2‐pyrrolidinone (NMP) and also high solubility and excellent thermo‐oxidative stability, with 5 % weight loss in the range 433 to 597 °C. Copyright © 2004 Society of Chemical Industry     

Combustion Properties of Amino‐Substituted Guanidinium 4,4′,5,5′‐Tetranitro‐2,2′‐biimidazolate(N4BIM) Salts

This paper describes the combustion properties of the amino‐substituted guanidinium 4,4′,5,5′‐tetranitro‐2,2′‐biimidazolate (N4BIM) series, including the bis‐mono, di and triaminoguanidinium salts. These salts are of interest as propellant ingredient additives, and in particular, the bis‐triaminoguanidinium salt of N4BIM displays excellent burn rate and combustion behavior. Our combustion studies have shown that TAGN4‐BIM displays a fast burning rate and has the lowest pressure dependence exponent yet measured for a triaminoguanidinium salt.     

Copolymers of Poly(2,5‐benzimidazole) and Poly[2,2′‐(p‐phenylene)‐5,5′‐bibenzimidazole] for High‐Temperature Fuel Cell Applications

Copolymers of poly(2,5‐benzimidazole) (ABPBI) and poly[2,2′‐(p‐phenylene)‐5,5′‐bibenzimidazole] (pPBI) were synthesized for use as fuel cell membranes to take advantage of the properties of both constituents. The composition of the copolymers were controlled by changing the feed ratio of 3,4‐diaminobenzoic acid and terephthalic acid with 3,3′‐diaminobenzidine in the polycondensation reaction. The copolymer membranes showed higher conductivities, better mechanical properties, and larger acid absorbing abilities than commercial poly[2,2′‐(m‐phenylene)‐5,5′‐bibenzimidazole] membranes.

     

Synthesis and properties of organosoluble polyimides derived from 2,2′‐dibromo‐ and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianilines

Two new aromatic diamines, 2,2′‐dibromo‐4,4′‐oxydianiline (DB‐ODA 4 ) and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianiline (TB‐ODA 5 ), have been synthesized by oxidation, bromination, and reduction of 4,4′‐oxydianiline (4,4′‐ODA). Novel polyimides 6a–f and 7a–f were prepared by reacting DB‐ODA ( 4 ) and TB‐ODA ( 5 ) with several dianhydrides by one‐step method, respectively. The inherent viscosities of these polyimides ranged from 0.31 to 0.99 dL/g (0.5 g/dL, in NMP at 30°C). These polyimides showed enhanced solubilities compared to those derived from 4,4′‐oxydianiline and corresponding dianhydrides. Especially, polyimides 7a , derived from rigid PMDA and TB‐ODA ( 5 ) can also be soluble in THF, DMF, DMAc, DMSO, and NMP. These polyimides also exhibited good thermal stability. Their glass transition temperatures measured by thermal mechanical analysis (TMA) ranged from 251 to 328°C. When the same dianhydrides were used, polyimides 7 containing four bromide substituents had higher glass transition temperatures than polyimides 6 containing two bromide substituents. The effects of incorporating more polarizable bromides on the refractive indices of polyimides were also investigated. The average refractive indices (n_av) measured at 633 nm were from 1.6088 to 1.7072, and the in‐plane/out‐of‐plane birefringences (Δn) were from 0.0098 to 0.0445. It was found that the refractive indices are slightly higher when polyimides contain more bromides. However, this effect is not very obvious. It might be due to loose chain packing resulted from bromide substituents at the 2,2′ and 2,2′,6,6′ positions of the oxydiphenylene moieties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Theoretical Studies on Molecular and Explosive Properties of 4,4′,5,5′‐Tetranitro‐2,2′‐bi‐1H‐imidazole (TNBI)

We performed theoretical studies to predict the molecular structure, molecular properties, and explosive performance of 4,4′,5,5′‐tetranitro‐2,2′‐bi‐1H‐imidazole (TNBI). High levels of ab initio and density functional theories were employed to predict the molecular structure of TNBI. Predicted TNBI structure was in good agreement with that observed by X‐ray crystallography. Heat of formation in the solid phase at 298 K was predicted to be 270.3 kJ/mol. Density of TNBI was predicted to be 1.919–1.956 g/cm³ depending upon the parameter sets of group additivity method. By using these values as input data, we estimated detonation velocity and C–J pressure to be 8.69–8.80 km/s and 34.5‐36.1 GPa, respectively. Impact sensitivity of TNBI was predicted to be 33 cm.     

Preparation of organo‐soluble poly[(2,2′‐m‐phenylene)‐5,5′‐bibenzimidazole] with high yield by homogeneous nitration reaction

To prepare organo‐soluble poly[(2,2,′‐m‐phenylene)‐5,5′‐bibenzimidazole] (PBI) with high yield, a homogeneous nitration of PBI was attempted. Nitro‐substituted PBI (NO₂‐PBI) was synthesized through the homogeneous reaction of the PBI powder with nitric acid in sulfuric acid. The degree of substitution (DS) of this NO₂‐PBI is higher than that of the NO₂‐PBI prepared through the heterogeneous reaction of the PBI fiber. The viscosity of the NO₂‐PBI prepared through the homogeneous reaction decreased with increasing amount of nitric acid added. The DS of the NO₂‐PBI reached the maximum value of 2. The substitution efficiency of nitro groups decreased as the amount of nitric acid added increased. When a small quantity of nitric acid was added, the substitution of the sulfonic acid group was confirmed as well as that of the nitro group. The solubility of the NO₂‐PBI depended strongly on the DS. The NO₂‐PBI having the DS of about 2 was completely soluble in dimethylacetamide and almost soluble in N‐methylpyrrolidone. At an elevated temperature, it was also soluble in other polar aprotic solvents such as dimethylformamide and dimethylsulfoxide. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 438–445, 2000     

Synthesis of Substituted 2,2′‐Bipyridines and 2,2′:6′,2′′‐Terpyridines by Cobalt‐Catalyzed Cycloaddition Reactions of Nitriles and α,ω‐Diynes with Exclusive Regioselectivity

A variety of substituted 2,2′‐bipyridines were synthesized by a 1,2‐bis(diphenylphosphino)ethane (dppe)/cobalt chloride hexahydrate (CoCl₂⋅6 H₂O)/zinc‐catalyzed [2+2+2] cycloaddition reaction of diynes and nitriles, with all reactions exhibiting exclusive regioselectivity. Thus, symmetrical and unsymmetrical 1,6‐diynes and 2‐cyanopyridine reacted in the presence of 5 mol % of dppe, 5 mol % of CoCl₂⋅6 H₂O and 10 mol % of zinc powder to provide the corresponding 2,2′‐bipyridines. Under identical reaction conditions, 1‐(2‐pyridyl)‐1,6‐diynes and nitriles reacted smoothly with exclusive regioselectivity to produce 2,2′‐bipyridines in good yield. 2,2′‐Bipyridines were also obtained by the double [2+2+2] cycloaddition reaction of 1,6,8,13‐tetraynes with nitriles. Similarly, 2,2′:6′,2′′‐terpyridines were synthesized from 1‐(2‐pyridyl)‐1,6‐diyne and 2‐cyanopyridine. The regiochemistry observed can be explained by considering the electronic nature of cobaltacyclopentadiene intermediates and nitriles. A survey of the exclusive regiochemical trend gives reasonable credence to the synthetic potential of the present method.     

Highly transparent and organosoluble polyimides derived from 2,2′‐disubstituted‐4,4′‐oxydianilines

Polypyrrole (PPy) and Polypyrrole‐ZnO (PPy‐ZnO) nanocomposites were electrodeposited on mild steel and its corrosion protection ability was studied by Tafel and Impedance techniques in 3.5% NaCl solution. Pure Polypyrrole film was not found to protect the mild steel perfectly but the coating with nano‐sized ZnO (PPy‐ZnO) has dramatically increased the corrosion resistance of mild steel. Electrochemical Impedance Spectroscopy (EIS) measurements indicated that the coating resistance (R_coat) and corrosion resistance (R_corr) values for the PPy‐ZnO nanocomposite coating was much higher than that of pure PPy coated electrode. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

A copolymer of poly[2,2′‐(m‐phenylene)‐5,5′‐ bibenzimidazole] and poly(2,5‐benzimidazole) for high‐temperature proton‐conducting membranes

A novel copolymer of polybenzimidazoles was prepared by copolymerization of 3,3′‐diaminobenzidine tetrahydrochloride, 3,4‐diaminobenzoic acid and isophthalic acid in polyphosphoric acid at 200 °C. The polymerization could be performed within 90–110 min with the assistance of microwave irradiation. The solubility of the copolymer obtained in N,N‐dimethylacetamide (DMAc) was improved compared with those of poly[2,2′‐(m‐phenylene)‐5,5′‐bibenzimidazole] and poly(2,5‐benzimidazole). Thus copolymer membranes could be readily prepared by dissolving the copolymer powders in DMAc with refluxing under ambient pressure. The decomposition temperature of the copolymer was about 520 °C in air according to thermogravimetric analysis data. The proton conductivity and mechanical strength of the phosphoric acid‐doped copolymer membranes were investigated at elevated temperatures. A conductivity of 0.09 S cm^?1 at 180 °C and a tensile stress at break of 5.9 MPa at 120 °C were achieved for the acid‐doped copolymer membranes by doping acids in a 75 wt% H₃PO₄ solution. Copyright © 2010 Society of Chemical Industry     

Molecular simulation of the glass transition and proton conductivity of 2,2′‐benzidinedisulfonic acid and 4,4′‐diaminodiphenylether‐2,2′‐disulfonic acid‐based copolyimides as polyelectrolytes for fuel cell applications

The glass transition temperatures (T_gs) and proton conductivities of polyimides synthesized from naphthalene‐1,4,5,8‐tetracarboxylic dianhydride (NTDA), 2,2′‐benzidinedisulfonic acid (BDSA), 4,4′‐diaminodiphenylether‐2,2′‐disulfonic acid (ODADS), and non‐sulfonated diamine monomers have been predicted using molecular dynamics simulations. The specific volumes for two dry and four hydrated NTDA‐based polyimides were plotted versus temperatures above and below T_gs to obtain the glass transition temperatures. The simulation results suggest that the ODADS‐based polyimide membranes exhibit lower T_gs and thus better mechanical properties than the BDSA‐based polyimides, which may be attributed to the high mobility of backbones of ODADS as supported by the vectorial autocorrelation function (VACF) results of this study. In addition, comparison of the simulated T_gs for the dry and hydrated ODADS‐based polyimides has shown that water content in polyimides can affect their T_gs. The proton conductivities of a representative polyimide in both dry and hydrated conditions have been obtained from molecular dynamics simulations of the proton and hydronium ion diffusion. The simulated conductivity for the hydrated NTDA‐ODADS/BAPB cell is in reasonable agreement with the experimental value obtained from the AC impedance method. The relationship between the chemical composition, chain flexibility, and the glass transition and proton conduction of these NTDA‐based polyimides was explored on the basis of VACF and pair correlation function analysis. Copyright © 2006 Society of Chemical Industry     

Synthesis and characterization of organosoluble polyfluorinated polyimides derived from 3,3′,5,5′‐tetrafluoro‐4,4′‐diaminodiphenylmethane and various aromatic dianhydrides

A polyfluorinated aromatic diamine, 3,3′, 5,5′‐tetrafluoro‐4,4′‐diaminodiphenylmethane (TFDAM), was synthesized and characterized. A series of polyimides, PI‐1–PI‐4, were prepared by reacting the diamine with four aromatic dianhydrides via a one‐step high‐temperature polycondensation procedure. The obtained polyimide resin had moderate inherent viscosity (0.56–0.68 dL/g) and excellent solubility in common organic solvents. The polyimide films exhibited good thermal stability, with an initial thermal decomposition temperature of 555°C–621°C, a 10% weight loss temperature of 560°C–636°C, and a glass‐transition temperature of 280°C–326°C. Flexible and tough polyimide films showed good tensile properties, with tensile strength of 121–138 MPa, elongation at break of 9%–12%, and tensile modulus of 2.2–2.9 GPa. The polyimide films were good dielectric materials, and surface and volume resistance were on the order of a magnitude of 10¹⁴ and 10¹⁵ Ω cm, respectively. The dielectric constant of the films was below 3.0 at 1 MHz. The polyfluorinated films showed good transparency in the visible‐light region, with a cutoff wavelength as low as 302 nm and transmittance higher than 70% at 450 nm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1442–1449, 2007     

Tunable molecular weights of poly(triphenylamine‐2,2′‐bithiophene) and their effects on photovoltaic performance as sensitizers for dye‐sensitized solar cells

Despite the huge progress achieved over the past decade, the relationship between the molecular weights of dyes and the performance of dye‐sensitized solar cells (DSSCs) remains unclear. In this article, we report on the fine control of the number‐average molecular weight (M_n) of poly(triphenylamine‐2,2′‐bithiophene) (PPAT) dyes with cyanoacrylic acid moieties as acceptors. We found a correlation between the M_n and photovoltaic performance of these polymers when they were used for DSSC applications. In this study, three samples (PPAT‐01, PPAT‐02, and PPAT‐03) with different M_n values (M_ns = 1700, 2800, and 3500 g/mol) were prepared through the control of the polymerization time and characterized by analytical gel permeation chromatography and NMR. Under the same experimental conditions, the overall cell efficiency of the oligomer dyes showed a nonmonotonic tendency with increasing molecular weight. The power‐conversion efficiencies were 2.81% for PPAT‐01, 4.72% for PPAT‐02, and 1.88% for PPAT‐03. UV absorption measurements proved that PPAT‐03 formed aggregation, whereas PPAT‐01 and PPAT‐02 were in the monolayer state adsorbed on TiO₂. The larger aggregation decreased charge transfer; thus, poor photoelectric conversion performance was observed. Furthermore, a higher molecular weight reduced the amount of PPAT‐03 adsorbed on TiO₂, and this had a crucial effect on the performance of the cells because of the reduced photocurrent. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44182.     

Cure kinetics of multifunctional epoxies with 2,2′‐dichloro‐4,4′‐diaminodiphenylmethane as hardener

The curing behavior of the epoxy resin N,N,N′,N′‐tetraglycidyldiaminodiphenyl methane (TGDDM) with triglycidyl p‐aminophenol as a reactive diluent was investigated using 2,2′‐dichloro‐4,4′‐diaminodiphenylmethane (DCDDM) as the curing agent. The effect of the curing agent on the kinetics of curing, shelf‐life, and thermal stability in comparison with a TGDDM‐diaminodiphenylsulfone (DDS) system was studied. The results showed a lesser activation energy at the lower level of conversion with a broader cure exotherm for the epoxy‐DCDDM system in comparison with the epoxy‐DDS system, although the overall activation energy for the two systems was comparable. TGA studies showed more stability in the epoxy‐DCDDM system than in the epoxy‐DDS system. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2097–2103, 2000     

Synthesis of 3′,4′‐disubstituted terthiophenes. Characterization and electropolymerization. I. 3′,4′‐dibromo‐2,2′:5′,2″‐terthiophene in photovoltaic display

Recent studies on conducting polymers have demonstrated that polymers of 3‐substituted thiophene produce very stable compounds. Although this kind of substitution improves the regularity, structural defects still exist. To overcome this drawback, the polymerization of 3,4‐disubstituted thiophene is proposed as a convenient way of synthesizing regular, highly conjugated conductive polymers. Our interest is thus focused on the synthesis of tetra‐substituted thiophene derivatives, their polymerization, electrochemical properties, spectral characteristics, oxidizing potential, and the feasibility of photocells development. In this article, we report the synthesis and characterization of 3′,4′‐dibromo‐2,2′:5′,2″‐terthiophene which, as such or modified, may be a good starting product for obtaining new monomers of 3′,4′‐disubstituted terthiophenes, that would allow the effect of the substituents on the properties of the respective polymers to be studied. In addition, the monomer was electropolymerized and the resulting deposit was electrochemically and morphologically characterized. Two conclusions were drawn: first, more uniform and homogeneous layers than those of polythiophene are obtained; second, the thin layers of the polymer, electron acceptors, absorb in the visible. Finally, photocells were assembled to investigate their photovoltaic effect. Although the so prepared solar cells showed some photovoltaic effect, the yield was low.© 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5314–5321, 2006