A low profile miniaturized widely‐spaced triband bandpass FSS using coupled resonance

In this article, a triband highly selective widely‐spaced bandpass frequency‐selective surface (FSS) is presented. The proposed FSS is consisted of five metal layers that are separated from each other by four dielectric substrates. Using coupled resonance between layers, three passbands operating at 11.0, 17.4, and 31.9 GHz are achieved. Meanwhile, the dimension of the unit cell of the FSS can be achieved in 0.139λ₀ × 0.139λ₀ (λ₀ is the wavelength of the first resonant frequency in the free‐space), and the overall thickness can be 0.057λ₀, exhibiting miniaturization and low profile characteristics. Due to the proposed FSS can provide multitransmission zeros between two adjacent passbands, the relative bandwidth of the spacing between the second passband and the third passband can reach 58.8% from 17.4 to 31.9 GHz. Thus, a widely spaced response is achieved. In practical, the proposed FSS has an important role in the radio cross‐sectional reduction of some military systems, such as homing head, which can simultaneously detecting mid‐range and long‐range targets. Furthermore, the FSS shows the stable response of angles for both TE and TM polarizations. The equivalent circuit model (ECM) is provided to analysis its operating principle. Finally, a prototype of the proposed FSS is simulated, fabricated and measured. The measured results are in good agreement with the simulation ones.     

Polarization independent quad‐bandpass frequency selective surfaces with wide‐band ratio

A single layer polarization independent quad‐bandpass frequency selective surface (FSS) with wide‐band ratio is demonstrated theoretically as well as experimentally. The proposed structure passes four frequency bands with wide band ratio. The proposed FSS design is implemented by incorporating alternate arrangement of four units which are rotated 90° clockwise to form a unit cell of metal over a FR4 substrate. The geometrical dimensions of proposed unit cell are optimized and arranged in such a way that the structure possesses the quad bandpass characteristic and aspect dimensions of one unit is 0.11λ × 0.11λ with respect to first resonant frequency. This FSS provides stable response for different angle of incidence in transverse electric (TE) mode and transverse magnetic (TM) mode. To validate the results proposed FSS array has been fabricated and measured in free space environment. The measured results are in good agreement with the simulated results. Excellent stability is also observed for different incident angle.     

Miniaturization of frequency‐selective rasorber based on 2.5‐D knitted structure

Knitted structure based on through‐silicon vias is utilized to realize the miniaturization of frequency‐selective rasorber (FSR). According to equivalent circuit model analysis, additional inductance and capacitance introduced by an array of metal vias are considered, which is combined with lossy cross‐frame and lossless double square‐loop structure to realize the function of FSR. Through full wave simulation, the proposed 2.5‐D FSR demonstrates one passband between two absorption bands. The simulated results indicate a significant size reduction with P = 0.15 λ_L, where λ_L is the free‐space wavelength at the lowest frequency of ‐10 dB reflection. Moreover, an insertion loss of 0.49 dB can be observed at 3.99 GHz, the fractional bandwidth for reflection coefficients less than ‐10 dB is 100%, and the thickness of the whole structure is 0.138 λ_L, respectively. In addition, the frequency response of this miniaturized FSR is stable for incident angle up to 40° and both linear polarizations. After then, the prototype of this 2.5‐D FSR is fabricated and measured, which shows reasonable agreement with simulated results.     

Design of a novel miniaturized bandstop frequency selective surface exhibiting polarization insensitivity and enhanced oblique stability

In this article, a miniaturized 2.5‐dimensional frequency selective surface (FSS) bandstop filter operating at 2.4 GHz is presented. The proposed FSS contains meander lines as well as metallic patches on top and bottom layer of FR‐4 substrate, and vertical vias are employed to connect the top and the bottom layers. The proposed configuration significantly reduced the size of unit cell to 0.040λ₀ × 0.040λ₀ (where λ₀ is the free space wavelength) at the desired frequency of 2.4 GHz. Additionally, this element arrangement assists in achieving fractional bandwidth of 140%. The measured ?10 dB bandwidth is from 1 to 4.5 GHz. The proposed FSS is polarization insensitive and highly angularly stable (up to 75°). The equivalent circuit model (ECM) of this FSS and related surface current distribution are also provided to understand its working mechanism. The design performance validation has been carried out through the construction and testing of a functional prototype. The full wave simulation, the ECM, and the measured results depict a promising agreement.     

A miniaturized circularly polarized multi‐dipole antenna with wide axial‐ratio beamwidth via loading loop resonators

A miniaturized, loop resonators (LRs)‐loaded, circularly polarized (CP) multi‐dipole antenna with wide axial‐ratio (AR) beamwidth is proposed and demonstrated in this article. The radiator of this CP antenna consists of two pairs of parallel dipoles loaded with four LRs at their corners. By increasing the length of the LR, or decreasing the coupling space between the dipole and the LR, the effective length of the dipole can be lengthened significantly and thus the working frequency can be reduced without increasing the whole aperture size. As a result, a miniaturized radiator structure is completed. A feeding network consisting of a T‐shaped coupling feeding structure and four coplanar striplines having different lengths are specially designed to feed these dipoles with approximately the same magnitude and 90° phase quadrature. What is more, a cavity reflector is employed to achieve a unidirectional radiation with wide axial‐ratio beamwidth. The radiator of the proposed CP antenna has a small aperture size of only 0.34λ₀ × 0.34λ₀, where λ₀ is the free space wavelength at the working frequency. Measured results are in a good agreement with the corresponding simulated counterparts. Especially, the experimental results show that the antenna has achieved a wide AR beamwidth of 182° and 174° at the center frequency in the xoz and yoz planes, respectively.     

Metamaterial‐inspired miniaturized antenna loaded with IDC and meander line inductor using partial ground plane

In this article, a novel omnidirectional compact dual band metamaterial‐inspired antenna with CPW feed has been proposed for application of GSM 1800 (1.71‐1.785 GHz/1.805‐1.879 GHz), GSM 1900 (1.85‐1.91 GHz/1.93‐1.99 GHz), UMTS (1.92‐2.17 GHz), WLAN/Wi Fi (4.9, 5, 5.9 GHz), HiperLAN1 (5.15‐5.3 GHz), and HiperLAN2 (5.47‐5.72 GHz) using a combination of meander line inductor and interdigital capacitor (IDC). The antenna consists of complimentary right/left handed (CRLH) transmission line on both sides of patch to excite zeroth order mode (n = 0). The rectangular slotted stubs act as a virtual ground for the structure using a short circuit condition at the end of the IDC. The zeroth order resonance (ZOR) frequency is mainly controlled by IDC and partially with the meander line inductor. The designed antenna operates from 1.72 to 2.22 GHz and 4.25 to 5.88 GHz with radiating size of 0.56λ_o × 0.35λ_o (32 × 20 mm²), where λ_o is the free‐space wavelength at ZOR frequency of 5.27 GHz. The proposed antenna offers measured impedance bandwidth (|S₁₁| <?10 dB) of 25.3 and 18.7% at 1.95 and 5.28 GHz and covers the targeted frequency bands. The proposed structure offers omnidirectional radiation patterns are congruous throughout the working band.     

A novel miniaturized frequency selective surface

A novel single layer miniaturized frequency selective surface made of circular unit cell elements is presented in this article. The frequency selective surface (FSS) unit cell measures 0.055λ₀ × 0.055λ₀, where λ₀ corresponds to its free space wavelength. The proposed FSS offers band stop characteristics with bandwidth of 137.5 MHz centered at 1.39 GHz. The symmetrical structure of the unit cell elements provides polarization independency. The miniaturized unit cell elements help achieving angular independency for both TE and TM mode of polarization. The miniaturized design provides excellent angular independency with negligible frequency shift for varying incident angles. A prototype of the FSS is fabricated and its simulation results are validated using measurements.     

Broadband compact CPW‐fed metasurface antenna for SAR‐based portable imaging system

A broadband and compact coplanar waveguide (CPW) coupled‐fed metasurface (MS)‐based antenna for C‐band synthetic aperture radar (SAR) imaging application is proposed in this article, which is consisted of 16 uniform periodic square patches performed as radiators. The CPW feeding structure gives two following functions: (1) It excites an aperture coupling slot structure underneath the center of MS patch array. (2) It acts as a ground plane for the metasurface patch units. Different slots were investigated and eventually an hourglass‐shaped slot is applied to enhance bandwidth for imaging applications. A prototype with a dimension of 60 × 60 × 1.524 mm³ (1.1λ₀ × 1.1λ₀ × 0.03λ₀) operating at the center frequency 5.5 GHz (f₀) has been fabricated and measured to verify the design principle. This antenna has a measured impedance bandwidth of 12.4% from 5.14 to 5.82 GHz, a peak gain of 9.2 dBi and averaged gain of 7.2 dBi at broadside radiation. Microwave imaging experiments using the proposed antenna have been carried out and a good performance is achieved.     

A triple‐layer dual‐bandpass frequency selective surface of third order response with equivalent circuit analysis

A multilayered cascaded and polarization‐dependent frequency selective surface (FSS) exhibiting dual bandpass frequency response is proposed in this article. The FSS is composed of two metal‐based square patch layers in the two ends and one aperture type layer in the middle, separated by two dielectric substrates. The FSS exhibits bandpass response of third order with two transmission poles in the 5‐6 GHz band and one pole at 2.5 GHz. The passbands are separated well enough with a transmission zero at 3.5 GHz leading to significant out‐of‐band rejection. The structure is ultrathin with the thickness on the order of 0.01λ₀ with respect to the lowest resonating frequency. It is shown with parametric studies how the poles can be tuned individually. Principle of operation of the FSS is explained with its equivalent circuit model. Transmission phase of the FSS varies linearly with frequency in the upper band. Simulation result is verified experimentally for the fabricated prototype.     

A wideband circularly polarized crossed magneto‐electric dipole

A novel wideband crossed magneto‐electric (ME) dipole for circularly polarized (CP) radiation is proposed in this paper. The proposed antenna consists of a crossed dipole, four parasitic elements, and two pairs of folding metal plates (magnetic dipole). The parasitic elements and magnetic dipole are employed to enhance the axial ratio bandwidth (ARBW). The antenna size is 0.51λ₀ × 0.51λ₀ × 0.33λ₀, where λ₀ is the corresponding free‐space wavelength at the center frequency. A prototype antenna is fabricated and tested. The experiment results depict that the impedance bandwidth (IBW) for voltage standing wave ratio < 2 is 79.2% (2.5‐5.78 GHz) and the 3‐dB axial ratio bandwidth (ARBW) is 72.5% (2.7‐5.77 GHz). At the same time, good CP characteristics and stable symmetrical radiation patterns can be obtained across the operation bandwidth.     

A dual‐polarized cross‐dipole antenna with wide beam and high isolation for base station

In this paper, a dual‐polarized cross‐dipole antenna with wide beam and high isolation is designed and analyzed for base station. The proposed antenna consists of two planar cross dipoles with four square patches, two L‐shaped microstrip lines, two ground plates, four parasitic patches, and a reflector. The square patches are placed between the center of cross dipoles to couple with L‐shaped microstrip lines. By introducing the parasitic patches, the wide beam can be realized. The measured results show that the proposed antenna achieves an impedance bandwidth (|S₁₁| < ?10 dB) of about 18.7% (1.9‐2.35 GHz) and an isolation better than 30 dB. A measured gain of 5.7 dBi and a half‐power beamwidth over 120° at the center frequency are obtained. Furthermore, the size of the proposed antenna is only 0.5λ₀ × 0.5λ₀ × 0.22λ₀ (λ₀ is wavelength at the center frequency).     

A dipole‐type millimeter‐wave antenna with directional radiation characteristics

A dipole‐type millimeter‐wave (mm‐wave) antenna with directional radiation characteristics is presented. A radiating patch structure composed of a dipole‐type radiation patch and a rectangular‐shaped parasitic patch are initially investigated to achieve a wider bandwidth. To further improve the operating bandwidth and to realize a directional radiation characteristic, this radiating patch structure is top‐loaded above a conducting cavity‐backed ground structure, which has a low profile (thickness of 3 mm). The measured results show that the proposed mm‐wave antenna can achieve a wide 10‐dB bandwidth of 51.3% (29.6‐50.0 GHz) and stable gain across the desired frequency range. Furthermore, good directional characteristics over the entire mm‐wave frequency band with a compact antenna size of 0.64λ_40GHz × 0.91_λ40GHz × 0.43_λ40GHz are also realized. Hence, it is suitable for many small size wireless mm‐wave systems.     

Dual‐wideband filtering power divider based on center‐fed three‐line coupled structure

In this article, a dual‐wideband filtering power divider is proposed by using a center‐fed three‐line coupled structure with three open stubs and two isolation resistors. The center‐fed three‐line coupled structure can generate two wide passbands separated by a transmission zero (TZ). The three open stubs can achieve four TZs around the two passbands, which is conducive to the frequency selectivity. Compared with the reported designs, the bandwidth is extended and the performance of isolation, insertion loss and circuit size can reach balance. The proposed design is implemented with size of 0.22 λ_g × 0.39 λ_g (λ_g is the guided wavelength at the center frequency of the lower passband) which exhibits the 3‐dB fractional bandwidths of 56.5%/24.27% and the insertion loss of 0.51/0.68 dB at the center frequency of two passband (f₁/ f₂) of 1.94/4.2 GHz, while the isolation at f₁/f₂ are higher than 22.5/20.1 dB.     

Ultrawideband high‐gain dual‐polarized antenna with anti‐interference capability

In this article, a high‐gain dual‐polarized antenna with band‐rejection capability for ultrawideband (UWB) applications is proposed. Tapered dipoles are chosen as a primary radiator to achieve UWB operation and it is reflected by a metallic cavity reflector for high gain radiation. A notch at WLAN band is realized by etching a set of four bent slots in the radiating elements. The measured results demonstrate that the proposed design with overall dimensions of 0.69λ _L × 0.69λ _L × 0.16λ _L (λ _L is free‐space wavelength at the lowest operating frequency) has operating bandwidth of 95.1% (3.2‐9.0 GHz) and the rejected frequency band from 5.0 to 5.9 GHz. Additionally, good unidirectional radiation patterns with a broadside gain from 8.1 to 11.5 dBi and radiation efficiency of better than 90% are also achieved.     

A low‐profile wideband dual‐polarization patch antenna with antisymmetric feeding network

In this paper, a novel broadband dual‐polarization patch antenna is proposed. Antisymmetric Γ feeding network is applied to excite the radiating patch etched on the upper side of the horizontal substrate, which could minimize the undesired radiation from the probe and extend the impedance bandwidth. For verifying the proposed approach, a prototype is fabricated and measured, the simulated and measured results show the antenna has a wide impedance bandwidth of 48% (1.66‐2.71 GHz) for S11 < ?10 dB, as well as stable radiation gain around 9.5 dBi with low cross‐polarization. In addition, the total height of the antenna is only 0.17 λ₀ ( λ₀ is the free space wavelength of central frequency) and high port‐to‐port isolation is better than 30 dB. The characteristics of the proposed antenna illustrate it can be an indication for a micro base station in the mobile communication system.     

Novel ultra‐compact two‐dimensional waveguide‐based metasurface for electromagnetic coupling reduction of microstrip antenna array

A novel ultracompact two‐dimensional (2D) waveguide‐based metasurface is proposed herein and applied for the first time to reduce mutual coupling in antenna array for multiple‐input multiple‐output applications. The unit cell of the proposed 2D waveguide‐based metasurface is ultracompact (8.6 mm × 4.8 mm, equal to λ₀/14.2 × λ₀/25.5) mainly due to the symmetrical spiral lines etched on the ground. The metasurface exhibits a bandgap with two transmission zeros attributing to the negative permeability in the vicinity of magnetic resonance and the negative permittivity in the vicinity of electric resonance. Taking advantage of these two features, a microstrip antenna array is then designed, fabricated, and measured by embedding an 8 × 1 array of the well‐engineered 2D waveguide‐based metasurface elements between two closely spaced (9.2 mm, equal to λ₀/13.3) H‐plane coupled rectangular patches. There is good agreement between the simulated and measured results, indicating that the metasurface effectively reduces antenna mutual coupling by more than 11.18 dB and improves forward gain. The proposed compact structure has one of the highest reported decoupling efficiencies among similar periodic structures with comparable dimensions. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:789–794, 2015.     

Circularly polarized quad‐band monopole antenna of wireless communication system

In this article, multiband monopole antenna has been designed for the applications of wireless communication systems. The antenna is composed of I‐shaped strips which are placed in such a way that the each of the resonating strips produced distinct frequency bands. The optimum dimension of the proposed antenna is printed on dielectric substrates of FR4 epoxy having dimensions of 0.3λ₀ × 0.21λ₀ × 0.009λ₀. The antenna has been fabricated and measured for evidence. The measured results are verified with simulated results. The comparison of simulated and measured S₁₁ parameter, radiation pattern, peak gains, and circular polarization are described in the section of experimental results. The measured result shows that the antenna may cover the frequency band of Digital Cellular System, Personal Communications Service, Long Term Evolution‐4G, Bluetooth, Worldwide Interoperability Microwave Access, Wireless Local Area Network, 802.11j (WLAN‐Public Safety), and X‐band (Satellite Communication‐downlink).     

Coplanar waveguide‐fed electrically small dual‐polarized short‐ended zeroth‐order resonating antenna using Ω‐shaped capacitor and single‐split ring resonator for GPS/WiMAX/WLAN/C‐band applications

This work explains the design and analysis of a triple‐band electrically small (ka = 0.56 < 1) zeroth‐order resonating (ZOR) antenna with wideband circular polarization (CP) characteristics. The antenna compactness is obtained due to ZOR frequency of composite right/left‐handed (CRLH) transmission line (TL) and wideband CP radiation are achieved due to the introduction of single‐split ring resonator and asymmetric coplanar waveguide fed ground plane. The proposed antenna obtains an overall electrical size including the ground plane of 0.124 λ₀ × 0.131 λ₀ × 0.005 λ₀ at 1.58 GHz and physical dimension of 23.7 × 25 × 1 mm³ are achieved. The antenna provides a size reduction of 44.95% compared to a conventional monopole antenna. The novelty behind the ohm‐shaped capacitor is the generation of extra miniaturization with better antenna compactness. The antenna provides dual‐polarized radiation pattern with linear polarization radiation at 1.58 and 3.54 GHz, wideband CP radiation at 5.8 GHz. The antenna measured results shows good impedance bandwidth of 5%, 6.21%, and 57.5% for the three bands centered at 1.58, 3.54, and 5.8 GHz with a wider axial ratio bandwidth (ARBW) of 25.47% is obtained in the third band. The antenna provides a higher level of compactness, wider ARBW, good radiation efficiency, and wider S₁₁ bandwidth. Hence, the proposed antenna is suitable for use in GPS L1 band (1.565‐1.585 GHz), WiMAX 3.5 GHz (3.4‐3.8 GHz) GHz, WLAN 5.2/5.8 GHz (5.15‐5.825 GHz), and C‐band (4‐8 GHz) wireless application systems.     

Miniaturized low‐profile antenna based on uniplanar quasi‐composite right/left‐handed metamaterial

In this article, a metamaterial‐based broadband low‐profile antenna is presented. The proposed antenna employed an array of uniplanar quasi‐composite right/left‐hand (CRLH) metamaterial cells. This structure contributes to exciting the operating modes in lower frequencies. The antenna has an overall electrical size of 0.75 × 0.60 × 0.07 λ₀³ (λ₀ is the center operating wavelength in free space) and provides a 25% measured bandwidth with the center frequency of 5.1 GHz and maximum gain of 6.6 dB. The proposed antenna is an appropriate candidate for WLAN, WiMAX, and other wireless communication applications.