SCARA机器人内模控制方法

为了使SCARA机器人在外界干扰和模型不精确的情况下具有优良的轨迹跟踪性能,提出一种基于内模控制原理设计SCARA机器人控制器的方法。采用拉格朗日方法获得SCARA机器人动力学模型,将其作为内模控制的估计模型;选择内模滤波器[f(S)]设计内模控制器[Q(S),]使其满足稳态误差为零的条件,通过推导得出不同输入信号下的SCARA机器人控制律。通过仿真,将其与自适应模糊滑模控制方法进行对比分析,结果表明所提出的方法轨迹跟踪精度高,抗干扰能力强,控制器参数调节简单。     

机械系统的快速有限时间跟踪控制及其在航天器交会中的应用

针对一类具有匹配干扰的二阶机械系统,本文研究了快速有限时间跟踪控制问题.结合有限时间反步法和非奇异快速终端滑模,本文提出了一种新的快速有限时间控制律,并给出了控制器参数所需满足的充分条件以保证系统的快速有限时间稳定性.进一步地,在一定情形下,所设计的快速有限时间控制律能够退化为经典的反步法、有限时间控制律和非奇异快速终端滑模控制律.最终,将所设计的控制律应用于航天器交会系统,数值仿真结果验证了所提方法的有效性.     

机器人系统终端滑模重复学习轨迹跟踪控制

针对非线性机器人系统的轨迹跟踪问题, 提出一种终端滑模重复学习混合控制方案. 该方案综合了重复学习控制和终端滑模技术的特性, 能够有效跟踪周期性参考信号, 抑制周期性和非周期性动态的干扰, 具有较强的鲁棒性和良好的轨迹跟踪性能, 且算法的实现不需要完全已知系统模型信息. 应用Lyapunov 稳定性理论证明了闭环系统的全局渐近稳定性. 三自由度机器人系统数值仿真结果验证了所提出的终端滑模重复学习控制的有效性.

     

永磁同步电动机反推控制

永磁同步电动机是一个复杂耦合的非线性系统.针对永磁同步电动机的非线性特性,提出了反推控制的方法,将反推控制应用于永磁同步电动机位置伺服系统中,通过跟踪位置给定信号,实现系统输入输出的线性化和系统的解耦.Matlab仿真表明,反推控制相对PID控制而言,其设计参数少,便于工程实现;且反推控制能够保证系统的全局稳定,具有很好的位置跟踪能力,对外界负载的干扰具有一定的鲁棒性.     

SCARA机器人的模糊自适应滑模控制

为了提高SCARA机器人的轨迹跟踪控制性能,提出一种双模糊自适应滑模控制;采用一自适应模糊控制器,根据滑模到达条件对滑模切换增益进行估算,消除滑模控制中输出力矩的抖振现象,增强其对不确定性因素的适应能力;采用另一自适应模糊控制器对指数趋近律系数进行修正,改善由于大范围初始位姿产生的偏差而引起的大力矩和速度跳变问题;基于Lyapunov方法进行了稳定性证明,保证控制系统的稳定性与收敛性;仿真实验结果表明,该方法应用于SCARA机器人,跟踪效果良好并产生了平滑的力矩输出和速度输出.     

永磁同步电动机的自适应神经网络动态面控制

研究永磁同步电动机的位置跟踪控制问题.针对参数不确定的永磁同步电动机系统,提出自适应神经网络动态面位置跟踪控制方法.根据Stone Weierstrass逼近定理,利用神经网络逼近电动机系统中的复杂非线性函数.采用动态面技术的自适应反步方法设计电动机的位置跟踪控制器实现电动机的位置跟踪控制.提出的控制策略不仅能够克服电机参数的不确定性和负载扰动,而且避免了传统反步设计方法存在的“复杂性爆炸”问题.根据Lyapunov稳定性理论,证明闭环系统具有半全局稳定性,位置跟踪误差收敛于原点的小邻域内.仿真结果表明了所提控制方法能够使电动机快速、准确地跟踪给定的位置信号;神经网络能够很好地逼近系统中的复杂非线性函数.     

时变不确定性系统的二自由度最优鲁棒稳态跟踪控制器设计

研究了被控系统存在范数有界的时变模型摄动和未知外部干扰时鲁棒稳态跟踪问题. 利用二自由度控制结构和Youla参数化方法.提出了一个最坏情况稳态绝对误差的精确计算公 式,利用该公式最优稳态跟踪控制器设计问题可化为一个有限维l1优化问题.因此控制器设计 只需解一个标准线性规划问题.此外,还证明了所提出的控制器可同时保证系统的鲁棒稳定性 和最优跟踪性能.仿真结果表明了该方法的有效性和可行性.     

基于龙伯格观测器的感应电机预设性能位置跟踪优化控制EI北大核心CSCD

考虑暂稳态约束、控制参数优化及参数摄动和负载扰动等对感应电机位置跟踪控制性能的影响,本文提出了一种基于龙伯格观测器的预设性能优化控制方法.首先,针对电机转子磁链在实际中不可测的问题,采用龙伯格观测器对其进行了快速准确的估计.其次,基于反步法完成感应电机位置预设性能控制器的设计,基于变增益指数趋近律完成感应电机磁链滑模控制器的设计,通过构造干扰观测器对电机系统中由参数摄动和负载扰动引起的不确定项进行观测,实现了对系统给定值准确的跟踪控制.再次,将遗传算法(GA)与改进的粒子群优化(IPSO)算法相结合,对所设计的控制器参数进行优化整定,进一步提高了系统的收敛速度和稳态精度.基于李雅普诺夫稳定性理论分析表:所设计的控制器能够保证位置跟踪误差一直处于预设边界内,且整个闭环系统是全局一致有界稳定的.最后,通过仿真和模拟实验对比分析验证了本文所提方法的有效性及在实际电机系统中应用的可行性.     

飞翼飞行器的操纵面故障自适应补偿控制

本文针对具有操纵面卡死、失效故障以及执行器饱和的飞翼飞行器纵向运动,考虑系统的预定动态性能,提出了一种自适应反步补偿跟踪控制方案.设计预定动态性能(prescribed performance bound,PPB)边界以保证系统的跟踪误差,采用二阶指令滤波器限制执行器的饱和,通过控制分配避免执行器故障后对横侧向运动的影响.所设计的自适应反步补偿跟踪控制律能够保证系统对参考信号的渐近跟踪.仿真结果表明了本文方法的有效性.     

一种基于反步法的鲁棒自适应终端滑模控制

针对不确定严格反馈块控非线性系统, 提出了一种基于反步法的鲁棒自适应终端滑模变结构控制方法. 系统的未知不确定及外界干扰由模糊系统在线逼近, 利用反步法设计了变结构控制的终端滑模面, 并由此得到了鲁棒自适应终端滑模控制器, 使系统的跟踪误差在有限时间内趋于给定轨迹的任意小的邻域内. 通过Lyapunov定理证明了闭环系统所有信号最终有界. 对某战斗机6自由度机动仿真结果表明, 该方法具有强鲁棒性.     

Backstepping Sliding Mode Trajectory Tracking via Extended State Observer for Quadrotors with Wind Disturbance

To overcome nonlinear, underactuated and external wind disturbances problems for the 6-DOF (degrees of freedom) quadrotor unmanned aerial vehicle (UAV) system, a backstepping sliding mode control algorithm based on high-order extended state observer (ESO) is proposed. Based on the hierarchical control principle, the quadrotor UAV dynamic system is decomposed into position subsystem and attitude subsystem to facilitate the backstepping control design. Moreover, the EXO is used to estimate the remaining unmeasurable states and the external wind disturbances online. The advantages of the controllers are that they can not only ensure good tracking performance, but also deal with uncertain external disturbances. To imitate the real situation as much as possible, the external wind disturbances are composed of four basic wind models in this paper. The tracking error and estimate error of the design methods are shown to arbitrarily small by using Lyapunov theory. Finally, the effectiveness and superiority of the proposed control algorithm are proved by the simulation.

     

Adaptive Output Feedback Control of Flexible-Joint Robots Using Neural Networks: Dynamic Surface Design Approach

In this paper, we propose a new robust output feedback control approach for flexible-joint electrically driven (FJED) robots via the observer dynamic surface design technique. The proposed method only requires position measurements of the FJED robots. To estimate the link and actuator velocity information of the FJED robots with model uncertainties, we develop an adaptive observer using self-recurrent wavelet neural networks (SRWNNs). The SRWNNs are used to approximate model uncertainties in both robot (link) dynamics and actuator dynamics, and all their weights are trained online. Based on the designed observer, the link position tracking controller using the estimated states is induced from the dynamic surface design procedure. Therefore, the proposed controller can be designed more simply than the observer backstepping controller. From the Lyapunov stability analysis, it is shown that all signals in a closed-loop adaptive system are uniformly ultimately bounded. Finally, the simulation results on a three-link FJED robot are presented to validate the good position tracking performance and robustness of the proposed control system against payload uncertainties and external disturbances.     

A Markov Game-Adaptive Fuzzy Controller for Robot Manipulators

This paper develops an adaptive fuzzy controller for robot manipulators using a Markov game formulation. The Markov game framework offers a promising platform for robust control of robot manipulators in the presence of bounded external disturbances and unknown parameter variations. We propose fuzzy Markov games as an adaptation of fuzzy Q-learning (FQL) to a continuous-action variation of Markov games, wherein the reinforcement signal is used to tune online the conclusion part of a fuzzy Markov game controller. The proposed Markov game-adaptive fuzzy controller uses a simple fuzzy inference system (FIS), is computationally efficient, generates a swift control, and requires no exact dynamics of the robot system. To illustrate the superiority of Markov game-adaptive fuzzy control, we compare the performance of the controller against a) the Markov game-based robust neural controller, b) the reinforcement learning (RL)-adaptive fuzzy controller, c) the FQL controller, d) the H_infin theory-based robust neural game controller, and e) a standard RL-based robust neural controller, on two highly nonlinear robot arm control problems of i) a standard two-link rigid robot arm and ii) a 2-DOF SCARA robot manipulator. The proposed Markov game-adaptive fuzzy controller outperformed other controllers in terms of tracking errors and control torque requirements, over different desired trajectories. The results also demonstrate the viability of FISs for accelerating learning in Markov games and extending Markov game-based control to continuous state-action space problems.     

柔性关节机器人高精度自适应反步法控制

为实现多连杆柔性关节机器人的高精度运动控制,首先对其建立完整的动力学模型,包含了连杆和关节动力学的耦合项、LuGre动态摩擦模型和关节回差等因素．然后针对该模型设计带观测器的自适应反步法控制器,对不可测项进行在线估计和补偿．理论分析证明了观测器的收敛性和闭环系统的稳定性．该方法在一个3DOF（degree of freedom）柔性关节机器人上进行仿真,仿真结果验证了观测器的有效性,并表明该控制器能够降低连杆跟踪误差,实现良好的轨迹跟踪效果．     

Robust Adaptive Backstepping Motion Control of Linear Ultrasonic Motors Using Fuzzy Neural Network

A robust adaptive fuzzy neural network (RAFNN) backstepping control system is proposed to control the position of an X-Y-Theta motion control stage using linear ultrasonic motors (LUSMs) to track various contours in this study. First, an X-Y-Theta motion control stage is introduced. Then, the single-axis dynamics of LUSM mechanism with the introduction of a lumped uncertainty, which includes cross-coupled interference and friction force, is derived. Moreover, a conventional backstepping approach is proposed to compensate the uncertainties occurred in the motion control system. Furthermore, to improve the control performance in the tracking of the reference contours, an RAFNN backstepping control system is proposed to remove the chattering phenomena caused by the sign function in the backstepping control law. In the proposed RAFNN backstepping control system, a Sugeno-type adaptive fuzzy neural network (SAFNN) is employed to estimate the lumped uncertainty directly and a compensator is utilized to confront the reconstructed error of the SAFNN. In addition, the motions at the X axis, Y axis, and Theta axis are controlled separately. The experimental results show that the contour tracking performance is significantly improved and the robustness to parameter variations, external disturbances, cross-coupled interference, and friction force can be obtained, as well using the proposed RAFNN backstepping control system.     

基于收缩反步的不确定机械臂轨迹跟踪控制

针对不确定机械臂系统的轨迹跟踪控制问题,基于干扰观测器原理,提出了一种收缩反步控制算法.首先,采用非线性观测器对系统的模型不确定项和未知外部干扰部分进行观测.然后,使用收缩反步控制求解出控制输入力矩,从而实现对参考轨迹的精确跟踪,并分析二阶闭环系统的增量稳定性和Lyapunov方程解的原点指数稳定性.最后,将上述所提控制律应用于2-DOF机械臂,通过收缩反步与滑模控制的对比仿真,证明其有效性.     

Adaptive dynamic surface control of flexible-joint robots using self-recurrent wavelet neural networks.

A new method for the robust control of flexible-joint (FJ) robots with model uncertainties in both robot dynamics and actuator dynamics is proposed. The proposed control system is a combination of the adaptive dynamic surface control (DSC) technique and the self-recurrent wavelet neural network (SRWNN). The adaptive DSC technique provides the ability to overcome the "explosion of complexity" problem in backstepping controllers. The SRWNNs are used to observe the arbitrary model uncertainties of FJ robots, and all their weights are trained online. From the Lyapunov stability analysis, their adaptation laws are induced, and the uniformly ultimately boundedness of all signals in a closed-loop adaptive system is proved. Finally, simulation results for a three-link FJ robot are utilized to validate the good position tracking performance and robustness against payload uncertainties and external disturbances of the proposed control system.     

Model-based robust control design and experimental validation of collaborative industrial robot system with uncertainty

Based on the traditional PID control and robust control algorithm, a novel practical robust control method is designed for the 6-DOF collaborative industrial robot with uncertainty. The proposed algorithm consists of a robust term and a model-based PD control term, which we call MPDP controller. It is demonstrated by Lyapunov theoretical analysis that the algorithm is able to guarantee uniform boundedness and uniform ultimate boundedness of the system. Simulations and experiments show the good performance of MPDP control in a robot with smaller steady-state tracking errors and better robustness compared to PID controllers.     

Trajectory tracking control of a 6-DOF hydraulic parallel robot manipulator with uncertain load disturbances

This study addresses the trajectory tracking control of a 6-DOF (degrees of freedom) hydraulic parallel robot manipulator with uncertain load disturbances. As load disturbances are the main external disturbances of the parallel robot manipulators and have a significant impact on system tracking performance, many researchers have been devoted to synthesize advanced control methods for improving the system robustness under the assumption that load disturbances are bounded. However, load disturbances are uncertain and vary in a large range in real situation happening in most hydraulic parallel robot manipulators, which is opposed to the assumption. In this paper, the load disturbances are directly measured by force sensors. Then a sliding mode control with discontinuous projection-based adaptation laws is proposed to improve the tracking performance of the parallel robot manipulator. Simulations and experiments with typical desired trajectory are presented, and the results show that good tracking performance is achieved in the presence of uncertain load disturbances.