Bi2O3掺杂对Mg4Nb2O9陶瓷的微结构及微波介电性能的影响

采用固相反应法制备了Mg4Nb2O9基微波介质陶瓷,研究了Bi2O3掺杂对Mg4Nb2O9陶瓷烧结行为、相结构、显微结构及微波介电性能的影响。实验结果表明:Mg4Nb2O9陶瓷烧结温度随Bi2O3掺杂量的增加而减小,添加2.0wt%Bi2O3,烧结温度从1350℃降低至1175℃;随Bi2O3添加量从0.0wt%增大到3.0wt%,最强峰(104)晶面间距d值由2.756nm增大至2.769nm;Mg4Nb2O9陶瓷的微波介电性能随Bi2O3掺杂量增加而变化;掺杂2.0wt%Bi2O3的Mg4Nb2O9陶瓷在1175℃保温2小时烧结,获得亚微米级陶瓷,且具有最佳的微波介电性能,εr为12.58,Q×f为71949.74GHz。     

Ba置换改性(Ca1-xBax)[(Mg1/3Nb2/3)0.6Ti0.4]O3陶瓷结构与微波介电性能的研究

研究了Ba置换改性对Ca [(Mg1/3Nb2/3)0.6Ti0.4]O3陶瓷微观结构与介电性能的影响.通过XRD与SEM分析发现,当x=0.15,(Ca1-xBax) [(Mg1/3Nb2/3)0.6Ti0.4]O3形成了正交晶系钙钛矿结构的单相固溶体;当x=0.20～0.80时,改性陶瓷为正交与六方钙钛矿结构的两相复合固溶体;当x=0.85 时,所形成(Ca0.15Ba0.85) [(Mg1/3Nb2/3)0.6Ti0.4]O3陶瓷为六方钙钛矿结构的单相固溶体.(Ca1-xBax) [(Mg1/3Nb2/3)0.6Ti0.4]O3系陶瓷微波介电性能的变化与Ba在材料内部的分布状态密切相关,与基材CMNT陶瓷相比:当x=0.15时,陶瓷的介电常数提高,介电损耗降低,谐振频率温度系数向负方向移动:εr=55,Qf值=32000GHz(6.5GHz下),τf=-36.82ppm/℃;当x=0.20～0.80间变化时,(Ca1-xBax)[(Mg1/3Nb2/3)0.6Ti0.4]O3两相复合陶瓷的微波介电性能由于复合效应而表现出连续变化的规律:εr= 45～33 ,Qf值= 30500～40200GHz(6.3GHz～7.6GHz下),τf = -17.7～12.52ppm/℃;当x=0.85时,单相钙钛矿固溶体(Ca0.15Ba0.85) [(Mg1/3Nb2/3)0.6Ti0.4]O3获得良好的微波介电性能:εr=31,Qf值达到44000GHz(8.5GHz下),τf=10.81ppm/℃.     

(1-x)(Mg0.7Zn0.3)TiO3-xCa0.61La0.26TiO3系陶瓷的微波介电性能研究（英文）

本实验研究了(1-x)(Mg0.7Zn0.3)TiO3-x(Ca0.61La0.26)TiO3(MZT-CLT)系陶瓷的微观结构和微波介电性能,通过(Ca0.61La0.26)TiO3来协调(Mg0.7Zn0.3)TiO3陶瓷的谐振频率温度系数.MZT-CLT陶瓷的主晶相为(Mg0.7Zn0.3)TiO3,第二相为Ca0.61La0.26TiO3和(Mg0.7Zn0.3)Ti2O5.烧结温度和陶瓷组成对微波介电性能影响显著,当烧结温度为1275℃时,可以获得良好的致密度,当烧结温度超过1300℃时,Zn的蒸发导致陶瓷致密度和介电性能下降.随着(Ca0.61La0.26)TiO3含量的增大,材料的介电常数增大,品质因数减小.当x=0.13,烧结温度为1275℃保温4h,(MZT-CLT)陶瓷具有优良微波介电性能,εr=26,Q.f=86000 GHz,τf=-6×10-6/℃.     

x%V2O5+1.5%Li2CO3共掺杂Mg4Nb2O9陶瓷低温烧结及其微波介电性能

采用机械合金法制备了Mg4Nb2O9微波介质陶瓷,研究了添加V2O5和Li2CO3对其烧结性能、显微结构及微波介电性能的影响。结果表明:添加V2O5和Li2CO3可有效降低Mg4Nb2O9陶瓷烧结温度(940℃),获得亚微米级(0.86μm)微波介质陶瓷。1.50%V2O5和1.50%Li2CO3(质量分数)共掺杂Mg4Nb2O9陶瓷于940℃烧结获得良好微波介电性能:介电常数为12.7,品质因数为45028GHz,谐振频率温度系数为-7.65×10-5℃-1,有望成为新一代低温烧结基板材料。     

Al2O3掺杂对Ba4Sm9.33Ti18O54陶瓷显微结构和介电性能的影响

采用固相反应法制备了Ba4Sm9.33Ti18O54(简称BST)xwt%Al2O3(x=0~1.5)微波介质陶瓷.研究了掺杂Al2O3对BST陶瓷的显微结构和介电性能的影响.扫描电镜和能谱分析结果显示:未掺杂的BST陶瓷中有少量Sm2Ti2O7相,随着增加Al2O3掺入量,Sm2Ti2O7相消失,BST陶瓷中先后产生了BaTi4O9(x≥0.6)和BaAl2Ti5O14(x≥1.0)两种新相.介电性能测试结果表明Sm2Ti2O7相的消失以及少量BaTi4O9相的形成,能显著提高BST陶瓷的Qf值,但会降低陶瓷的介电常数.当Al2O3的掺入量从0.6wt%增加到1.0wt%时,BaTi4O9相的量逐渐增加,引起BST陶瓷的Qf值略微下降.BaAl2Ti5O14相的产生会同时降低BST陶瓷的介电常数和Qf值.掺入0.6wt%Al2O3的BST陶瓷在1340℃烧结3 h后具有最佳的介电性能:εr=74.7,Qf=10980 GHz,τf=–11.8×10-6/℃.     

Mg4Nb2O9/CaTiO3复合陶瓷的微波介电性能

采用传统固相法制备Mg4Nb2O9/CaTiO3复合陶瓷,研究Li2CO3-V2O5(LV)共掺杂对其烧结特性、微观结构和微波介电性能的影响.实验结果表明:一定量的LV掺杂能够使Mg4Nb2O9/CaTiO3复合陶瓷的烧结温度降至1200℃;XRD和EDX综合分析表明,样品由(Mg4-xCax)Nb2O9/(Ca1-x...     

(1-y)Ca1-xLa2x/3 TiO3-yCa(Mg1/3 Nb2/3)O3系陶瓷的缺位结构与微波介电性能研究

采用固相合成法制备了(1-y)Ca1-xLa2x/3 TiO3-yCa(Mg1/3Nb2/3)O3系列固溶体陶瓷材料,研究了该体系微波介电性能与微观结构的关系.研究结果表明:当体系组成为0.5Cao6Lao267 TiO3-0.5Ca(Mg1/3Nb2/3)O3时,在1400℃下烧结保温4小时所得到材料的微波介电性能最佳:εr=55,Q×f值=45000GHz(7.6GHz下),τf=0.04×10-6/℃.同时还探讨了三价阳离子La3 固溶时产生的A点缺陷Vca2 对固溶体结构及微波介电性能的影响.     

(1-x)(Mg0.9Co0.1)TiO3-x(Ca0.61La0.26)TiO3陶瓷的微波介电性能（英文）

研究了(1-x)(Mg0.9Co0.1)TiO3-x(Ca0.61La0.26)TiO3(MCT-CLT)体系陶瓷的微波介电性能.目的是通过(Ca0.61La0.26)TiO3(CLT)协调(Mg0.9Co0.1)TiO3(MCT)陶瓷的谐振频率温度系数.实验发现,烧结温度和陶瓷组成对微波介电性能影响显著,当烧结温度为1300℃时,可以获得良好的致密度,当烧结温度超过1300℃时,陶瓷致密度和介电性能下降.此外,随着CLT含量的增加,材料的介电常数增大,品质因数减小.当CLT含量为13%,烧结温度为1300℃,保温2h,(MCCLT)陶瓷具有优良微波介电性能,εr=22.4,Q×f=35000 GHz,τf=-8.7×10-6/℃,从而达到实用要求.     

添加V2O5对Ba(Mg1/3Ta2/3)O3烧结及微波介电性能的影响

本工作就添加V2O5对Ba（Mg1／3Ta2／3）O3烧结性及微波介电性能的影响进行了研究和讨论．实验结果发现，添加少量V2O5能明显改善BMT陶瓷的烧结性，当V2O5的添加量为0．1mol％时，烧结体密度可达理论密度的98％同时较纯BMT陶瓷烧结温度降低150℃左右．此时样品仍具有较高的微波介电性能：Q·f＝62450GHz；εγ＝25．     

CO3O4掺杂Mg2SiO4陶瓷介电性能的研究

采用固相反应法制备了Co3O4掺杂Mg2SiO4微波介质陶瓷,研究Co2+离子掺杂对Mg2SiO4陶瓷烧结特性、相组成和介电性能的影响.结果表明:Co2+可以完全取代Mg2+固溶在Mg2 SiO4晶体中形成(Cox Mg1-x)2SiO4固溶体,通过调整加入的Co3O4的摩尔量可以获得介电性能优良的微波陶瓷.当x=0.025时,在1250℃下保温3h,( Co0.025Mg0.975)2 SiO4陶瓷具有良好的介电性能为:εr=7.7,Q=8850(1.8MHz),电容温度系数为50.4×10-6/℃.     

Hydrothermal Crystallization in the Systems La2(CO3)3 ? 6H2O-CaCO3(BaCO3)-R-H2O (R = Na2CO3, K2CO3, NaHCO3, KHCO3, NaCl, NH4Cl, CO(NH2)2)

Crystallization in the systems La₂(CO₃)₃ ⋅ 6H₂O-CaCO₃(BaCO₃)-R-H₂O (R = Na₂CO₃, K₂CO₃, NaHCO₃, KHCO₃, NaCl, NH₄Cl, CO(NH₂)₂) was studied under hydrothermal conditions (400–450°C). The solid reaction products were found to contain LaOHCO₃ and NaLa(CO₃)₂. Detailed thermal decomposition schemes were proposed for these phases, and their lattice parameters were refined. __________ Translated from Neorganicheskie Materialy, Vol. 41, No. 11, 2005, pp. 1366–1372. Original Russian Text Copyright ? 2005 by Nikol'skaya, Dem'yanets.     

Flux growth of single magnetic sublattice antiferromagnetic garnets Ca3 Fe2 Ge3 O12 and Ca3 Mn2 Ge3 O12

Magnetic single crystals garnets Ca₃ X₂ Ge₃ O₁₂ with X = Mn³⁺ or Fe³⁺ containing Ca²⁺ and Ge⁴⁺ are of great interest due to the rise of an antifer-romagnetic order in one definite octahedral site. The optimal conditions for obtaining single magnetic-sublattice garnets of large size (1 cm in diameter) have been analyzed. Two groups of solvents have been tested: Bi₂ O₃ or PbO based flux. The best results were obtained with PbO flux and starting composition : % Moles 44 PbO 1b 35 GeO₂ 1b 15 CaO 1b 6 X₂ O₃.     

Bi2O3助熔剂对CaO-B2O3-SiO2/Al2O3玻璃陶瓷复合材料性能的影响

以CaO-B₂O₃-SiO₂(CBS)玻璃粉体和Al₂O₃陶瓷粉体为原料,通过在CBS与Al₂O₃的质量比固定为50:50的玻璃-陶瓷复合材料中添加适量的Bi₂O₃作为烧结助熔剂,探讨了Bi₂O₃助熔剂对CBS/Al₂O₃复合材料的烧结性能、介电性能、抗弯强度和热膨胀系数的影响规律.研究表明:Bi₂O₃助熔剂能通过降低CBS玻璃的转变温度和黏度促进CBS/Al₂O₃复合材料的致密化进程,于880 ℃下烧结即能获得结构较致密、气孔较少的CBS/Al₂O₃复合材料.然而,过量添加Bi₂O₃将使玻璃的黏度过低,从而恶化CBS/Al₂O₃复合材料的烧结性能、介电性能及抗弯强度.当Bi₂O₃的添加量为CBS/Al₂O₃复合材料的1.5wt%时,于880 ℃下烧结即能获得最为致密的CBS/Al₂O₃复合材料,密度为2.82 g·cm^-3,这一材料具有良好的介电性能(介电常数为7.21,介电损耗为1.06×10^-3),抗弯强度为190.34 MPa,0~300 ℃的热膨胀系数为3.52×10^-6 K^-1.     

K2(Rb2,Cs2,Tl2)TeBr6(I6) and Rb3(Cs3)Sb2(Bi2)Br9(I9) perovskite compounds

We systematize available experimental data on the crystal structure of the ternary halides K₂(Rb₂,Cs₂,Tl₂)TeBr₆(I₆) and Rb₃(Cs₃)Sb₂(Bi₂)Br₉(I₉), analyze the general trends in the properties of their single crystals, and examine the key features of the physicochemical interaction in related systems.     

Effect of doping with Co2O3, TiO2, Fe2O3, and Mn2O3 on the properties of Ce0.8Gd0.2O2?δ

The effects of Co, Fe, Mn, and Ti oxide additions on the sinterability and crystal-chemical, thermal, and electrical properties of Ce_0.8Gd_0.2O_2−δ have been studied. The results indicate that these oxides enhance the sinterability of the mixed oxide, regardless of whether they were introduced before or after synthesis. The most effective sintering aid is Co₂O₃. The lattice parameters of Ce_0.8Gd_0.2O_2−δ samples containing different metal oxide additions (1 mol %) are refined in space group Fm3m. The temperature-dependent thermal expansion data are used to determine the linear thermal expansion coefficients of the samples. Manganese oxide additions reduce the electrical conductivity of Ce_0.8Gd_0.2O_2−δ, whereas the other dopants increase it in the order Ti < Fe < Co. The activation energy for conduction increases in the order Co < Ti < Fe < Mn. Original Russian Text ? E.Yu. Pikalova, A.N. Demina, A.K. Demin, A.A. Murashkina, V.E. Sopemikov, N.O. Esina, 2007, published in Neorganicheskie Material, 2007, Vol. 43, No. 7, pp. 830–837.     

超临界流体干燥法制备TiO2/ Fe2O3 和TiO2/ Fe2O3/ SiO2 复合纳米粒子及光催化性能

以TiCl₄ 、Fe (NO₃ )₃·9H₂O 和Na₂SiO₃19H₂O 为原料, 采用溶胶凝胶法结合超临界流体干燥法(SCFD)制备了纳米级TiO₂/ Fe₂O₃ 和TiO₂/ Fe₂O₃/ SiO₂ 复合光催化剂。以光催化降解苯酚对所得催化剂的催化活性进行了评价。结果表明, 纳米TiO₂/ Fe₂O₃ 复合粒子与单组分TiO₂ 比较, 复合粒子光催化活性高于单组分的TiO₂, 6h 苯酚降解率高达95.9 %。SiO₂ 的加入可以抑制纳米粒子粒径的长大和晶相的转变, 增强TiO₂ 纳米粒子的热稳定性。复合光催化剂中Fe₂O₃ 最佳掺入量为0.06 %, SiO₂ 最佳掺入量为10 %(摩尔分数) 。并用XRD、TEM 和FTIR 等手段进行了表征。TiO₂ 以锐钛矿型形式存在, SiO₂ 以无定性形式存在。比较了不同制备方法制得的TiO₂/ Fe₂O₃ 复合光催化剂, 得出超临界干燥法制备的光催化剂具有粒径小、比表面积大、分散性好、光催化活性高等特点。采用超临界流体干燥可直接得锐钛型纳米复合光催化剂。     

纳米-Al2O3/SiO2加入量对MgO-Al2O3-SiO2复相陶瓷烧结机理的影响

为了探究纳米-Al₂O₃/SiO₂加入量对MgO-Al₂O₃-SiO₂复相陶瓷烧结行为的作用机理。以微米级MgO、纳米级Al₂O₃和SiO₂为主要原料制备陶瓷基复合材料。通过XRD和 SEM等检测手段对烧后试样的物相组成和微观结构进行测试与表征,重点研究Al₂O₃/SiO₂的加入对复相陶瓷物相组成、微观结构及烧结性能的影响。结果表明:随着Al₂O₃/SiO₂加入量的增大,试样烧后相对密度和烧后线变化率呈先增大后减小再增大的趋势,加入15%Al₂O₃/SiO₂(质量分数)的试样经1 500 ℃烧结后,其相对密度可以达到94%。引入的Al₂O₃/SiO₂与基体中的MgO生成镁铝尖晶石与镁橄榄石相,原位反应伴随的体积膨胀,抵消部分烧结过程中的体积收缩。Al₂O₃/SiO₂加入量为75%(质量分数)的试样经1 400 ℃烧结后,基体中有大量堇青石相生成,随着煅烧温度提高到1 500 ℃,堇青石分解所产生的高温液相促进了试样的烧结收缩。     

PbSbBiS4-Sb2S3 and PbSbBiS4-Bi2S3 joins in the PbS-Sb2S3-Bi2S3 system

Phase equilibria along the PbSbBiS₄-Sb₂S₃ and PbSbBiS₄-Bi₂S₃ joins of the PbS-Sb₂S₃-Bi₂S₃ system have been studied for the first time using differential thermal analysis, X-ray diffraction, microstructural analysis, microhardness tests, and density measurements, and the phase diagrams of the joins have been mapped out. The joins are shown to be pseudobinary with limited series of terminal solid solutions. The solid solutions are p-type semiconductors.     

Crystal structure of new superconducting materials LaIrSi3 and LaRhSi3. Structural relation between LaRh2Si2, La2Rh3Si5 and LaRhSi3

New superconducting ternary silicides LaRhSi₃ and LaIrSi₃ have been prepared by arc melting from the elements and annealing for ten days at 900°C. A single crystal study shows these materials to be of tetragonal symmetry and isostructural with BaPtSn₃. Their superconducting transition temperature which depends strongly on stoichiometry and thermal treatment occurs between 1.9 K and 2.7 K. The structures have been compared to those of the superconducting compounds LaRh₂Si₂ and La₂Rh₃Si₅. The occurence of superconductivity in these materials seems to be related to the presence of similar coordination polyhedra for Rh or Ir and Si atoms.     

Dielectric properties of Pb3 (PO4)2 | Pb3 (AsO4)2

The dielectric constants of Pb₃ (PO₄)₂ | Pb₃ (AsO₄)₂ at room temperature are intrinsic and fulfill the Lyddane - Teller - Sachs relation. At higher temperatures the specific conductivity increases with an activation energy of 0.56 eV leading to Maxwell - Wagner polarization effects thereby increasing the effective dielectric constant. Corresponding peaks in ∈' (T) are extrinsic and not attributed to structural phase transformations.