Conversion of chitinous wastes to hydrogen gas by Clostridium paraputrificum M-21

The chitinolytic bacterium Clostridium paraputrificum strain M-21 produced 2.2 and 1.5 mol hydrogen gas from 1 mol N-acetyl-D-glucosamine (GlcNAc) and ball-milled chitin equivalent to 1 mol of GlcNAc, respectively, at pH 6.0. In addition, strain M-21 efficiently degraded and fermented ball-milled raw shrimp and lobster shells to produce hydrogen gas: 11.4 mmol H2 from 2.6 g of the former and 7.8 mmol H2 from 1.5 g of the latter. Hydrogen evolution from these shell wastes were enhanced two fold by employing acid and alkali pretreatment. Waste from the starch industry was also converted to hydrogen. When C. paraputrificum M-21 was cultivated on ball-milled chitin and ball-milled shrimp shells for 14 and 12 h, respectively, chitinases ChiA and/or ChiB were detected as the major chitinase species in the supernatant of the cultures, suggesting that the play a critical role in the degradation of chitinous materials.     

双酶协同降解胶体几丁质及其作用机制

建立一种几丁质酶(chitinase,ChiA)和β-N-乙酰基己糖胺酶HJ5N协同催化体系,可实现一步反应降解胶体几丁质制备N-乙酰氨基葡萄糖(N-acetylglucosamine,GlcNAc),探讨不同因素对双酶协同催化体系的影响和双酶协同作用机制.结果表明,双酶协同催化体系的最适反应温度为30℃,最适反应pH...     

Purification and some properties of a chitinase from Xanthomonas sp. strain AK

Chitinase B (ChiB) was purified from the culture supernatant of Xanthomonas sp. strain AK by Phenyl-Toyopearl 650M and DEAE-Toyopearl 650M column chromatographies. The purified enzyme preparation gave a single band on SDS-polyacrylamide gel electrophoresis and the molecular weight of ChiB was estimated to be 48,000. The enzyme was optimally active at pH 6.0 and 60 degrees C. N-Terminal amino acid sequence analysis suggested that ChiB is a member of glycosyl hydrolase family 18 and that it is genetically different from ChiA recently reported (Sakka et al., J. Ferment. Bioeng., 86, 527-533, 1998). Immunological analysis suggested that ChiB was the major chitinase species in the culture supernatant of Xanthomonas sp. strain AK and that production of the enzyme was induced by the presence of chitin.     

海洋产几丁质酶厦门加西利亚单胞菌Chi34的筛选、鉴定及酶学性质分析

目的：海洋是自然界中含几丁质最多的生态系统,孵育了大量可降解利用几丁质的微生物,因此利用海洋微生物几丁质酶降解几丁质,是获得高附加值几丁寡糖的重要方法。本试验以连云港海域海泥为样品,以期筛选获得稳定的产几丁质酶菌株。方法：利用平板筛选法和摇瓶发酵复筛法筛选获得产几丁质酶菌株Chi34,利用形态学分析和16S r DNA序列分析对菌株进行鉴定,同时还研究了温度、pH、金属离子、EDTA及SDS等因素对Chi34几丁质酶的影响,最后通过TLC实验分析了Chi34几丁质酶降解几丁质胶体的产物。结果：菌株Chi34鉴定为厦门加西利亚单胞菌(Gallaecimonas xiamenensis),其几丁质酶酶活力为0.631 U/m L,最适反应温度为35℃,最适反应p H为6.0,Na₊、Ca₂₊、Mn₂₊、K₊对Chi34几丁质酶具有显著的激活作用,Cu₂₊、Fe₃₊、Ba₂₊、Zn₂₊、Cd₂₊、...     

A new type of beta-N-Acetylglucosaminidase from hydrogen-producing Clostridium paraputrificum M-21

A beta-N-acetylglucosaminidase gene (nag84A) was cloned from Clostridium paraputrificum M-21 in Escherichia coli. The nag84A gene consists of an open reading frame of 4647 by encoding 1549 amino acids, with a deduced molecular weight of 174,311, which have a catalytic domain belonging to family 84 of the glycoside hydrolases. Nag84A was purified from a recombinant E. coli and characterized. Although Nag84A exhibited high homology to the hyaluronidase from Clostridium perfringens, it did not degrade hyluronic acid. The enzyme hydrolyzed chitooligomers such as di-, tri-, tetra-, penta- and hexa-N-acetylchitohexaose, and synthetic substrates such as 4-methylumbelliferyl N-acetyl beta-D-glucosaminide [4-MU-(G1cNAc)], but did not hydrolyze 4-MU-beta-D-glucoside, 4-MU-alpha-D-glycoside, 4-MU-alpha-D-GlcNAc, 4-MU-alpha-D-galactoside, 4-MU-beta-D-xyloside, PNP-beta-D-galactoside, and PNP-alpha-D-xyloside. The enzyme was optimally active at 50 degrees C and pH 6.5, and the apparent K(m) and V(max) values for 4-MU-(GlcNAc) were 8.5 microM and 1.39 micromol/min/mg of protein, respectively. SDS-PAGE, zymogram, and immunological analyses suggested that Nag84A was inducible by ball-milled chitin. Since Nag84A has a high molecular weight with a family 84 catalytic domain with high homology to hyaluronidases but no hyaluronidase activity, the enzyme is a novel beta-N-acetylglucosaminidase different from others reported having low molecular weights and belonging to family 3 and family 18.     

Saccharification of chitin using solid-state culture of Aspergillus sp. S1-13 with shellfish waste as a substrate

Saccharification of chitin was performed in a suspension (mash) of a solid-state culture of chitinase-producing Aspergillus sp. Sl-13 with acid-treated shellfish waste as a substrate. The conditions for the saccharifying reaction and the solid-state cultivation were examined from the viewpoint of saccharification in the mash. Optimum cultivation conditions were defined: a solid-state medium consisting of 5 g of 10% lactic acid-treated crab shells (0.50-2.36 mm in size) and 3 ml of a basal medium (0.028% KH2PO4 0.007% CaCl2.2H2O, and 0.025% MgSO4.7H2O) supplemented with 0.3% peptone was inoculated with 4 ml of spore suspension (1 x 10(7) spores/ml), and the water content of the medium was adjusted to 75%; static cultivation at 37 degrees C for 7 d. When a culture obtained under the optimum conditions was suspended in 70 ml of 50 mM sodium phosphate-citrate buffer (pH 4.0) and incubated at 45 degrees C for 11-13 d, 55 mM N-acetylglucosamine (GlcNAc) was formed in the solid-state culture mash, indicating that at least 33% of the initial chitin in the solid material was hydrolyzed. Through the experiments, the amounts of G1cNAc formed in the solid-state culture mash varied in a way similar to that of the water-extractable pnitrophenyl beta-D-N-acetylglucosaminide-hydrolyzing enzyme in the culture, but not to that of the colloidal chitin-hydrolyzing enzyme. G1cNAc-assimilating lactic acid bacteria, which were inoculated into the mash after or at the start of the saccharification, formed lactic acid with decreasing GlcNAc.     

pH Induced Aggregation and Weak Gel Formation of Whey Protein Polymers

Whey protein polymers were formed by heating (80 °C) a 4% (w/v) whey protein (WP) isolate dispersion at pH 8.0 for 15, 25, 35, 45, or 53 min. Dispersions were adjusted to pH 6.0, 6.5, 7.0, 7.5, or 8.0 after heating and the rheological properties were determined. Viscosity increased with increased heating time and decreased pH. At pH 7.0 and 7.5, high-viscosity dispersions with pseudoplastic and thixotropic flow behavior were formed, while weak gels were formed at pH 6.0 and 6.5. The storage (elastic) and loss (viscous) moduli of pH-induced gels increased when temperature was increased from 7 °C to 25 °C, suggesting that hydrophobic forces are responsible for gelation. Key Words: weak-gels, whey proteins, polymers, gelation, functionality     

Stability of patulin at ph 6.0-8.0 and 25 degrees c.

Patulin was tested for stability at pH values of 6.0, 6.5, 7.0, 7.5, and 8.0, using S?rensen's phosphate buffer at 25 degrees C. Patulin was determined by high-performance liquid chromatography. When the percentage of patulin remaining was plotted versus reaction time, apparent first-order reaction plots were obtained. Reaction rate constants for disappearance of patulin ranged from 1.1 x 10(-2) h at pH 8.0-5.3 x 10(-4) h at pH 6.0. Values for half-life were calculated and ranged from 64 h at pH 8.0 to 1310 h at pH 6.0.     

Human N-acetylglucosaminyltransferase I. Expression in Escherichia coli as a soluble enzyme, and application as an immobilized enzyme for the chemoenzymatic synthesis of N-linked oligosaccharides

N-Acetylglucosaminyltransferase I (GnT-I), which catalyzes the transfer of an N-acetylglucosamine residue from UDP-N-acetylglucosamine to the alpha1,3-linked mannose on Man5GlcNAc2 (M5), is a critical enzyme for the synthesis of high-mannose-type to complex-type glycan structures in N-linked glycan processing. We developed a large-scale preparation system for recombinant human GnT-I (hGnT-I) using the maltose binding protein (MBP) fusion system to facilitate the chemoenzymatic route for complex-type N-linked glycan synthesis. MBP-fused GnT-I was purified by affinity chromatography on an amylose resin column. The relative activity of MBP-fused GnT-I toward high-mannose-type N-linked oligosaccharides was 100% for Man5GlcNAc2, 52% for Man3GlcNAc2, 17% for Man6GlcNAc2. MBP-fused GnT-I exhibited optimal activity at pH 6.5-9.5 and was more active between pH 6.5-9.0. The optimum temperature for MBP-fused GnT-I activity was 40 degrees C, but the enzyme was active between 0-70 degrees C. Mn2+ and Co2+ were critical for the enzyme activity, while Zn2+ and Ca2+ inhibited the activity. Kinetic analysis of the purified enzyme showed an apparent K(m) value of 0.483 mM and a V(max) of 101 nmol/mg/min for M5. Immobilization of MBP-fused GnT-I on the amylose resin led to an 80% yield of the high mannose-type-of oligosaccharide.     

Effects of pH and agitation on the growth of Listeria monocytogenes Scott A in brain heart infusion broth containing combined potassium lactate and sodium diacetate during storage at 4 or 10 degrees C

The objective of this study was to compare the effects of pH on the growth kinetics of Listeria monocytogenes Scott A in static and agitated broths stored at 4 and 10 degrees C with and without a combination of 1.85% potassium lactate (PL) and 0.13% sodium diacetate (SDA) (3.3% of a 60% commercial solution, PURASAL P Opti.Form 4). The pH of brain heart infusion broth without (control) or with 1.85% PL + 0.13% SDA was adjusted to 5.5, 6.0, 6.5, and 7.5. L. monocytogenes Scott A was inoculated (at 10(2) CFU/ml) into pH-adjusted broth, which was stored at 4 or 10 degrees C with or without agitation. At pH 5.5, a listeriostatic effect was observed for the broth containing 1.85% PL + 0.13% SDA at 4 and 10 degrees C both with and without agitation. At pH 6.0, 1.85% PL + 0.13% SDA fully controlled the growth of L. monocytogenes Scott A in static broth at 4 degrees C for up to 20 days and significantly slowed the growth of the pathogen in agitated broth. At 10 degrees C, the growth of L. monocytogenes Scott A was significantly reduced by 1.85% PL + 0.13% SDA in agitated and unagitated broths. At pH 6.5, 1.85% PL + 0.13% SDA significantly suppressed the growth of L. monocytogenes Scott A at both 4 degrees C (P < 0.001) and 10 degrees C (P < 0.01). At pH 7.5, 1.85% PL + 0.13% SDA had a limited effect on the growth of L. monocytogenes Scott A in broth stored at 4 and 10 degrees C. At 4 degrees C, agitation decreased the lag time and increased the growth rate of L. monocytogenes Scott A at all tested pHs. A similar but less obvious trend was observed for broths stored at 10 degrees C. These results indicate that lactate-diacetate combinations effectively acted with low pH and temperature to inhibit the growth of L. monocytogenes Scott A.     

Identification and characterization of Clostridium paraputrificum M-21, a chitinolytic, mesophilic and hydrogen-producing bacterium

A strictly anaerobic, mesophilic and chitinolytic bacterial strain, M-21, was isolated from a soil sample collected from Mie University campus and identified as Clostridium paraputrificum based on morphological and physiological characteristics, and 16S rRNA sequence analysis. C. paraputrificum M-21 utilized chitin and N-acetyl- -glucosamine (GlcNAc), a constituent monosaccharide of chitin, to produce a large amount of gas along with acetic acid and propionic acid as major fermentation products. Hydrogen and carbon dioxide accounted for 65% and 35% of the gas evolved, respectively. The conditions for 1 l batch culture of C. paraputrificum, including pH of the medium, incubation temperature and agitation speed, were optimized for hydrogen production with GlcNAc as the carbon source. The bacterium grew rapidly on GlcNAc with a doubling time of around 30 min, and produced hydrogen gas with a yield of 1.9 mol H₂/mol GlcNAc under the following cultivation conditions: initial medium pH of 6.5, incubation temperature of 45°C, agitation speed of 250 rpm, and working volume of 50% of the fermentor. The dry cell weight harvested from this culture was 2.0 g/l.     

Dye Binding Properties of Chitin and Chitosan

Chitin (β (1°4)-N-acetyl-D-glucosamine) and chitosan (deacetylated chitin) are currently available in large quantities as waste products and by-products of the shellfish industry. Their potential as carriers for food additives was studied. Significant correlations were found between dye concentration ranging from 0.2–1.6 mg dye (FD&C Red No. 40) per g chitin or chitosan and dye-binding capacity of chitin or chitosan. Within a pH range of 2.0–7.0, dye-binding capacity of chitin was stable. Chitosan gelled below a pH of 5.5 and could not be evaluated but its dye-binding capacity was constant between pH 7.0 and 5.5. Above pH 7.0 dye-binding capacity decreased for chitin as well as for chitosan but between pH 2.0 and 6.0 no dye was released from dyed chitin containing 0.77 mg dye/g chitin.     

Purification and characterization of two types of chitosanase from Aspergillus sp. CJ22-326

Aspergillus CJ22-326, a fungi strain capable of utilizing chitosan as a carbon source, was isolated from soil samples. Two types of chitosanase (ChiA and ChiB) produced from the culture supernatant of Aspergillus CJ22-326 were purified to an apparent homogeneity identified by SDS–PAGE through ammonium sulfate precipitation, CM-Sepharose FF chromatography, and Sephacryl S-200 gel filtration. Molecular weights of the enzymes were 109 kDa (ChiA) and 29 kDa (ChiB). Optimum pH values and temperature of ChiA were 4.0 and 50 °C, respectively, those of ChiB were 6.0 and 65 °C. The enzyme activities of ChiA and ChiB were increased by about 0.5-fold and 1.5-fold, respectively, by the addition of 1 mM Mn²⁺. However, 2.5 mM Ag⁺, Hg²⁺ and Fe³⁺strongly inhibited ChiA and ChiB activities. Viscosimetric assay and analysis of reaction products of these enzymes, using chitosan as a substrate, by TLC indicated endo- and exo-type cleavage of chitosan by ChiB and ChiA, respectively. ChiB catalysed the hydrolysis of glucosamine (GlcN) oligomers larger than pentamer, and chitosan with a low degree of acetylation (0–30%), and formed chitotriose with chitohexaose as the major products. ChiA released a single glucosamine residue from chitosan and glucosamine oligomers. Both of the activities of ChiA and ChiB increased with the degree of deacetylation of chitosan. The enzyme ChiB had a useful reactivity and a high specific activity for producing functional chitooligosaccharides with high degree of polymerization.     

Purification and characterization of a 49-kDa chitinase from Streptomyces griseus HUT 6037

A 49-kDa chitinase (pI7.3) was purified to homogeneity from the culture supernatant of Streptomyces griseus HUT 6037 by ultrafiltration, DEAE-Sephadex A-50 and Sephadex G-100 column chromatographies, and chromatofocusing. The purified enzyme was stable up to 40 degrees C. The N-terminal amino acid sequence of the enzyme was highly homologous to the N-terminal region of the fibronectin type III-like domain of S. olivaceoviridis chitinase 01 belonging to family 18 glycosyl hydrolases. The 49-kDa chitinase hydrolyzed partially N-acetylated chitosan more easily than colloidal chitin. The hydrolyzate of 54% deacetylated chitosan by the enzyme was separated by CM-Sephadex C-25 column chromatography. The structures of the oligosaccharides obtained were determined by MALDI-TOF MS analysis combined with exo-glycosidase digestion. In addition to GlcNAc, (GlcNAc)2, and (GlcNAc)3, hetero-chitooligosaccharides with GlcNAc at the reducing end were detected. Thus, the specificity of the enzyme for the hydrolysis of the beta-1,4-glycosidic linkages in partially N-acetylated chitosan was similar to that of the family 18 chitinases.     

Chitin--the undisputed biomolecule of great potential

Of the truly abundant polysaccharides in Nature, only chitin has yet to find utilization in large quantity. Chitin is the second most abundant natural biopolymer derived from exoskeletons of crustaceans and also from cell walls of fungi and insects. Chitin is a linear beta 1,4-linked polymer of N-acetyl-D-glucosamine (GlcNAc), whereas chitosan, a copolymer of GlcNAc (approximately 20%) and glucosamine (GlcN, 80%) residues, is a product derived from de-N-acetylation of chitin in the presence of hot alkali. Chitosan is, in fact, a collective name representing a family of de-N-acetylated chitins deacetylated to different degrees. Both chitin/chitosan and their modified derivatives find extensive applications in medicine, agriculture, food, and non-food industries as well. They have emerged as a new class of physiological materials of highly sophisticated functions. Their application versatility is a great challenge to the scientific community and to industry. All these are the result of their versatile biological activity, excellent biocompatibility, and complete biodegradability in combination with low toxicity. Commercial availability of high-purity forms of chitin/chitosan and the continuous appearance of new types of chitin/chitosan derivatives with more and more useful and specific properties have led to an unlimited R&D efforts on this most versatile amino polysaccharide, chitin to find new applications, which are necessary to realize its full potential. Incidentally, this too has become an environmental priority. No doubt, chitin is surely an undisputed biomolecule of great potential.     

Effect of temperature and pH on survival of Listeria monocytogenes in coleslaw

The survival and growth of Listeria monocytogenes in fresh coleslaw, pH 3.9, and in coleslaw adjusted to pH 4.0, 5.0, 6.0 or 7.0 before inoculation was studied at three temperatures (4, 15 and 25 degrees C). L. monocytogenes was not detectable after 5 days incubation in fresh coleslaw nor in coleslaw adjusted to pH 4.0. Coleslaw at pH 5.0 was also inhibitory to L. monocytogenes at all three temperatures studied. A decline in viable numbers of L. monocytogenes in coleslaw at pH 6.0 occurred at 4 degrees C and at 15 degrees C, whereas at 25 degrees C the viable count of L. monocytogenes increased initially and remained high after incubation for 25 days. L. monocytogenes grew rapidly in coleslaw at pH 7.0 at all three temperatures studied, followed by an equally rapid decline in viable count.     

Copper-glyphosate sorption to microcrystalline gibbsite in the presence of soluble Keggin Al13 polymers

Among the most reactive yet largely neglected adsorbents of toxicant species occurring in acidic aquatic environments are the epsilon-Keggin Al13 polyoxocations [AlO4Al12(OH)24(H2O)12(7+)], known generally as Al13 polymers. Here, we report on the sorption of Cu(II), a common ingredient of pesticides, and glyphosate {N-[phosphonomethyl]glycine (PMG)}, a widely applied herbicide, to microcrystalline gibbsite [gamma-Al(OH)3] in the presence of soluble Al13 polymers over the pH range 4-7. In the presence of gibbsite and soluble Al13 polymers, dissolved Cu(II) decreased gradually with pH, achieving a minimum at pH 5.5. Between pH 5.5 and 6.0, however, soluble Cu increased markedly, with approximately 80% of the added metal remaining in solution at pH 5.86. At pH > 6.0, soluble Cu once again decreased, becoming undetectable at pH 7. The anomalous Cu solubilization was attributed to a concomitant deprotonation of soluble Al13 polymers, yielding surface OH groups possessing high affinity for Cu(II). Removal of Cu from solution at pH > 6.0 is facilitated by flocculation of the Al13 polymers to which Cu had sorbed. The sorption behavior of the zwitterionic PMG in the presence of gibbsite and Al13 polymers was consistent with this interpretation, there being a dramatic increase in sorbed PMG at pH > 6.0 as the Al13 polymers deprotonated and flocculated. Copper and PMG loss from solution with increasing pH when both adsorptives were added to the gibbsite-Al13 polymer system was broadly similar to what was observed in the PMG-free systems, although small differences were detected in response to varying the order of adsorptive addition. The inclusion of soluble Al polymers in our experiments exposes a fundamental limitation of models based on but a single inorganic adsorbent as a means to predict the behavior of trace metals and xenobiotic organic compounds in natural systems.     

Fate of Escherichia coli O157:H7, Salmonella typhimurium DT 104, and Listeria monocytogenes in fresh meat decontamination fluids at 4 and 10 degrees C.

Bacterial pathogens may colonize meat plants and increase food safety risks following survival, stress hardening, or proliferation in meat decontamination fluids (washings). The objective of this study was to evaluate the ability of Escherichia coli O157:H7, Salmonella Typhimurium DT 104, and Listeria monocytogenes to survive or grow in spray-washing fluids from fresh beef top rounds sprayed with water (10 or 85 degrees C) or acid solutions (2% lactic or acetic acid, 55 degrees C) during storage of the washings at 4 or 10 degrees C in air to simulate plant conditions. Inoculated Salmonella Typhimurium DT 104 (5.4 +/- 0.1 log CFU/ml) died off in lactate (pH 2.4 +/- 0.1) and acetate (pH 3.1 +/- 0.2) washings by 2 days at either storage temperature. In contrast, inoculated E. coli O157:H7 (5.2 +/- 0.1 log CFU/ml) and L. monocytogenes (5.4 +/- 0.1 log CFU/ml) survived in lactate washings for at least 2 days and in acetate washings for at least 7 and 4 days, respectively; their survival was better in acidic washings stored at 4 degrees C than at 10 degrees C. All inoculated pathogens survived in nonacid (pH > 6.0) washings, but their fate was different. E. coli O157:H7 did not grow at either temperature in water washings, whereas Salmonella Typhimurium DT 104 failed to multiply at 4 degrees C but increased by approximately 2 logs at 10 degrees C. L. monocytogenes multiplied (0.6 to 1.3 logs) at both temperatures in water washings. These results indicated that bacterial pathogens may survive for several days in acidic, and proliferate in water, washings of meat, serving as potential cross-contamination sources, if pathogen niches are established in the plant. The responses of surviving pathogens in meat decontamination waste fluids to acid or other stresses need to be addressed to better evaluate potential food safety risks.     

The effects of temperature, pH, sodium chloride and sodium nitrite on the growth of Listeria monocytogenes.

An automated turbidimetric system using multiwelled plates was used to examine the effects of different combinations of NaCl (0.5-8.0% w/v), NaNO2 (0-400 micrograms/ml) pH (4.6-7.4) and temperature (5-30 degrees C) on the growth of Listeria monocytogenes in tryptone soya broth. The data presented clearly illustrate the combinations that permit visible growth of the organism. The ability of L. monocytogenes to grow at low pH levels was strongly influenced by incubation temperature as well as NaNO2 concentration. At 20 degrees C and below, no visible growth was detected, even with 50 micrograms/ml NaNO2 at pH 5.3 (or below) within 21 days. At pH 6.0 and above, NaNO2 had little effect in delaying visible growth except at higher concentrations and also at lower incubation temperatures.     

Effect of preincubation temperature and pH on the individual cell lag phase of Listeria monocytogenes, cultured at refrigeration temperatures

The impact of precultural temperature and pH on the distribution of the lag phase of individual Listeria monocytogenes cells was assessed during preincubation at 7 degrees C, using a dilution protocol to obtain single cells, and optical density measurements to estimate the individual lag phase. Firstly, the pure temperature effect (37, 15, 10, 7, 4 and 2 degrees C) was investigated on a subsequent growth at 7 degrees C and pH 7.4. Secondly, low precultural temperatures (10, 7 and 4 degrees C) were combined with a controlled pH at 7.4 and 5.7 with a subsequent growth at 7 degrees C and at different pH values (7.4, 6.0 and 5.5). For all temperature-pH combinations, the individual cell lag phase was determined using a three-phase linear growth model. It was observed that at low precultural temperatures (2, 4 and 7 degrees C), a high proportion of L. monocytogenes cells were able to grow at 7 degrees C with almost no lag phase, consequently, the resulting distributions were positively skewed. Beside this, the variability observed was lower than at higher precultural temperatures. Regarding the precultural pH effect, at pH 7.4 the mean values of the lag phases were shorter at lower preincubation temperatures; while at pH 5.7 small pH transitions produced shorter individual lag phases at all precultural temperatures. The quantification of the effect of precultural conditions on the individual cell lag phase duration would improve the accuracy of the existing growth models, especially when a series of processing and storage steps are linked together in a process model or exposure assessment. Distributions will be fitted to the data for every set of conditions, generating useful tools for further risk assessment purposes.