Solid state polymerization of bis(trichlorophenoxo) cobalt(ii) complex to give poly(dichlorophenylene oxide)

Synthesis of four-coordinated (tetrahedral) trichlorophenol cobalt(II) complex with neutral ligand pyridine was achieved from the aqueous solution and its characterization was performed by UV-visible, IR spectral and CHN analysis. Solid state thermal polymerization of the complex was accomplished first at constant temperature employing different time intervals and secondly at constant decomposition time. The poly(dichlorophenylene oxide)s so synthesized were characterized by IR, ¹H NMR and ¹³C NMR spectral analysis, T_g determination, as well as measurement of molecular weight by a viscometric method.     

Synthesis and characterization of new aromatic poly(amide–imide)s based on 4‐aryl‐2,6‐bis(4‐trimellitimidophenyl) pyridines

New diimide–dicarboxylic acids, ie 4‐phenyl‐2,6‐bis(4‐trimellitimidophenyl)pyridine and 4‐p‐biphenyl‐2,6‐bis‐(4‐trimellitimidophenyl)pyridine, were synthesized by the condensation reaction of 4‐phenyl‐2,6‐bis(4‐aminophenyl)pyridine and 4‐p‐biphenyl‐2,6‐bis(4‐aminophenyl)pyridine with trimellitic anhydride in glacial acetic acid or dimethylformamide. The monomers were fully characterized by FT‐IR and NMR spectroscopies, and elemental analyses. A series of novel poly(amide–imide)s with inherent viscosities of 0.68–0.87 dl g^?1 was prepared from the two diimide–diacids with various aromatic diamines by direct polycondensation. The poly(amide–imide)s were characterized by FT‐IR and NMR spectroscopies. The λ_max data for the resulting poly(amide–imide)s were in the range of 260–292 nm. These polymers exhibited good solubilities in polar aprotic solvents. The 10 % weight loss temperatures are above 485 °C under a nitrogen atmosphere. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of hyperbranched poly(silyl ester)s

Hyperbranched poly(silyl ester)s were synthesized via the A₂ + B₄ route by the polycondensation reaction. The solid poly(silyl ester) was obtained by the reaction of di‐tert‐butyl adipate and 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The oligomers with tert‐butyl terminal groups were obtained via the A₂ + B₂ route by the reaction of 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyl‐trisi1oxane with excess amount of di‐tert‐butyl adipate. The viscous fluid and soft solid poly(silyl ester)s were obtained by the reaction of the oligomers as big monomers with 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The polymers were characterized by ¹H NMR, IR, and UV spectroscopies, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The ¹H NMR and IR analysis proved the existence of the branched structures in the polymers. The glass transition temperatures (T_g's) of the viscous fluid and soft solid polymers were below room temperature. The T_g of the solid poly(silyl ester) was not found below room temperature but a temperature for the transition in the liquid crystalline phase was found at 42°C. Thermal decomposition of the soft solid and solid poly(silyl ester)s started at about 130°C and for the others it started at about 200°C. The obtained hyperbranched polymers did not decompose completely at 700°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3430–3436, 2006     

Synthesis and characterization of novel aromatic poly(amide‐imide)s derived from 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl or 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl and various aromatic diamines

New aromatic diimide‐dicarboxylic acids having kinked and cranked structures, 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl (2a) and 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl (2b), were synthesized by the reaction of trimellitic anhydride with 2,2′‐bis(4‐aminophenoxy)biphenyl (1a) and 2,2′‐bis(4‐aminophenoxy)‐1,1′‐binaphthyl (1b), respectively. Compounds 2a and 2b were characterized by FT‐IR and NMR spectroscopy and elemental analyses. Then, a series of novel aromatic poly(amide‐imide)s were prepared by the phosphorylation polycondensation of the synthesized monomers with various aromatic diamines. Owing to structural similarity, and a comparison of the characterization data, a model compound was synthesized by the reaction of 2b with aniline. The resulting polymers with inherent viscosities of 0.58–0.97 dl g^?1 were obtained in high yield. The polymers were fully characterized by FT‐IR and NMR spectroscopy. The ultraviolet λ_max values of the poly(amide‐imide)s were also determined. The polymers were readily soluble in polar aprotic solvents. They exhibited excellent thermal stabilities and had 10% weight loss at temperatures above 500 °C under a nitrogen atmosphere. Copyright © 2003 Society of Chemical Industry     

Synthesis and properties of poly(aryl ether sulfone ether ketone ketone) (PESEKK)

4,4′‐bis(Phenoxy)diphenyl sulfone (DPODPS) was synthesized by reaction of phenol with bis(4‐chlorophenyl) sulfone in tetramethylene sulfone in the presence of NaOH. Two poly(aryl ether sulfone ether ketone ketone)s (PESKKs) with high molecular weight were prepared by low temperature solution polycondensation of DPODPS and terephthaloyl chloride (TPC) or isophthaloyl chloride (IPC), respectively, in 1,2‐dichloroethane and in the presence of aluminum chloride (AlCl₃) and N‐methylpyrrolidone (NMP). The resulting polymers were characterized by various analytical techniques, such as FT‐IR, ¹H‐NMR, DSC, TG, and WAXD. The results show that the T_g and T_d of PESEKKs are much higher, but its T_m is lower than those of PEKK. The other results indicate that PESEKKs exhibit excellent thermostabilities at 300 ± 10°C. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 489–493, 2005     

Synthesis,Characterization, and Antimicrobial Activity of Silver(I) and Copper(II) Complexes of Phosphate Derivatives of Pyridine And Benzimidazole

Two silver(I) complexes—{[Ag(4‐pmOpe)]NO₃}_n and [Ag(2‐bimOpe)₂]NO₃—and three copper(II) complexes—[Cu₄Cl₆O(2‐bimOpe)₄], [CuCl₂(4‐pmOpe)₂], and [CuCl₂(2‐bis(pm)Ope]—were synthesized by reaction of silver(I) nitrate or copper(II) chloride with phosphate derivatives of pyridine and benzimidazole, namely diethyl (pyridin‐4‐ylmethyl)phosphate (4‐pmOpe), 1H‐benzimidazol‐2‐ylmethyl diethyl phosphate (2‐bimOpe), and ethyl bis(pyridin‐2‐ylmethyl)phosphate (2‐bis(pm)Ope). These compounds were characterized by ¹H, ¹³C, and ³¹P NMR as well as IR spectroscopy, elemental analysis, and ESIMS spectrometry. Additionally, molecular and crystal structures of {[Ag(4‐pmOpe)]NO₃}_n and [Cu₄Cl₆O(2‐bimOpe)₄] were determined by single‐crystal X‐ray diffraction analysis. The antimicrobial profiles of synthesized complexes and free ligands against test organisms from the ATCC and clinical sources were determined. Silver(I) complexes showed good antimicrobial activities against Candida albicans strains (MIC values of ～19 μM ). [Ag(2‐bimOpe)₂]NO₃ was particularly active against Pseudomonas aeruginosa and methicillin‐resistant Staphylococcus epidermidis, with MIC values of ～5 and ～10 μM , respectively. Neither copper(II) complexes nor the free ligands inhibited the growth of test organisms at concentrations below 500 μg mL^?1.     

Structure and thermal degradation of poly(N‐phenyl acrylamide) and poly(N‐phenyl methacrylamide)

Poly(N‐phenyl acrylamide) (PPA) and poly(N‐phenyl methacrylamide) (PPMA) were prepared by using N‐phenyl acrylamide and N‐phenyl methacrylamide as monomer, respectively, in tetrahydrofuran using azobisisobutyronitrile as initiator. FT‐IR, ¹H‐NMR, and GPC were used to characterize their molecular structure. The PPA obtained exhibited higher molecular weight and wider molecular weight distribution than that of PPMA. Their thermal degradation and kinetics were systematically investigated in two atmospheres of nitrogen and air from room temperature to 800°C by thermogravimetric analysis at 10°C/min. Based on the thermal decomposition reactions in nitrogen and air, it is shown that a three‐step degradation process in nitrogen and a four‐step degradation process for two polymers were observed in this investigation. The initial thermal degradation temperature was lower than 190°C. Under two atmospheres, PPA exhibits higher degradation temperature, higher temperature at the maximum weight‐loss rate, faster maximum weight‐loss rates, and larger weight loss for the first‐stage decomposition, as well as higher char yield at 500°C than those of PPMA. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1065–1071, 2003     

Synthesis,Crystal Structure,and Thermal Behaviors of 3‐Nitro‐1,5‐bis(4,4′‐dimethylazide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP)

The energetic material, 3‐nitro‐1,5‐bis(4,4′‐dimethyl azide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP), was firstly synthesized by means of Click Chemistry using 1,5‐diazido‐3‐nitrazapentane as main material. The structure of NDTAP was confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy; mass spectrometry, and elemental analysis. The crystal structure of NDTAP was determined by X‐ray diffraction. It belongs to monoclinic system, space group C2/c with crystal parameters a=1.7285(8) nm, b=0.6061(3) nm, c=1.6712(8) nm, β=104.846(8)°, V=1.6924(13) nm³, Z=8, μ=0.109 mm⁻¹, F(000)=752, and D_c=1.422 g cm⁻³. The thermal behavior and non‐isothermal decomposition kinetics of NDTAP were studied with DSC and TG‐DTG methods. The self‐accelerating decomposition temperature and critical temperature of thermal explosion are 195.5 and 208.2 °C, respectively. NDTAP presents good thermal stability and is insensitive.     

Polymerization and characterization of bis(trichlorophenolato)di(pyridine) nickel(II) and bis(tribromophenolato)di(pyridine) nickel(II) dihydrate complexes in solution in the presence of iodine

The syntheses of bis(trihalophenolato)di(pyridine) nickel(II) complexes were achieved in aqueous solution, and their characterizations were performed by Fourier transform infrared (FTIR) spectroscopy, ultraviolet‐visible analysis, differential scanning calorimetry, and elemental analysis. The thermal polymerization of these complexes was studied in toluene solution in the presence of iodine. The effect of time, temperature, and amount of iodine added on the percentage conversion, structure of polymers, and intrinsic viscosity ([η]) were investigated. Polymers were characterized by FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopic analyses, glass‐transition temperatures determined by differential thermal analysis, and [η] values determined by the viscometric method. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2232–2239, 2002     

Synthesis of poly(urethane)s based on diphenyl‐silane/germane and oxyphenyl units: Structure–properties relationship

A series of poly(urethane)s (PUs) based on diphenyl‐silane or ‐germane and oxyphenyl units were synthesized by polycondesation of 4‐[4‐[9‐[4‐(4‐aminophenoxy)‐3‐methyl‐phenyl]fluoren‐9‐yl]‐2‐methyl‐phenoxy]aniline (3) and four bis(chloroformate)s ( I–IV ). These monomers were prepared and characterized in previous works. The best conditions for the polymerization reactions were investigated by a kinetic study. Also, a selection of the best solvent for the reaction was developed. Polymers were characterized by IR and ¹H, ¹³C, and ²⁹Si‐NMR spectroscopy and the results were in agreement with the proposed structures. Poly(urethane)s showed inherent viscosity values between 0.12 and 0.31 dL/g, indicative of low molecular weight species, probably of oligomeric nature. The glass transition temperature (T_g) values were observed in the 127–168°C range by DSC analysis. Thermal decomposition temperature (TDT_10%) values were above 300°C. All PUs showed good transparency in the visible region (>80% at 350 nm) due to the incorporation of the bulky monomer (fluorene) and oxyether linkages. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis,characterization and antibacterial activity of Pd(II), Pt(II) and Ag(I) complexes of 4-ethyl and 4-(p-tolyl)-1-(pyridin-2-yl)thiosemicarbazides

Pd(II), Pt(II) and Ag(I) ions were found to form stable complexes with 4-(p-tolyl)- or 4-ethyl-1-(pyridin-2-yl)thiosemicarbazides (Hp-TPTS or HEPTS). The complex structure was elucidated by analysis (elemental and thermal), spectroscopy (electronic, IR and ¹H NMR spectra) and physical measurements (magnetic susceptibility and molar conductance). The ligands coordinate to the metal ions as monobasic bidentate through nitrogen and sulfur atoms. The electronic spectra of the Pt(II) complexes in DMF showed a metal to ligand charge transfer transition at 11,935–13,260 cm^?1. The structural, electronic and vibrational features of HEPTS and Hp?TPTS were discussed on the basis of semi-empirical quantum mechanic calculations [ZINDO/S and semi-empirical parameterization (PM3)]. The simulated IR and electronic spectra are found reasonable in accordance with the experimental data. Finally, the antibacterial activities of the ligands and their complexes were investigated and some were found promising.     

Synthesis of poly(arylene benzimidazole) sulfone (PABIS) and preparation of hollow PABIS microspheres

4,4'‐Di(benzimidazolyl)benzene sulfone, as the monomer, is very readily available by the reaction of 4,4'‐dicarboxydiphenyl sulfone with o‐phenylenediamine, and poly(arylene benzimidazole) sulfone (PABIS) has been synthesized by the condensation polymerization of bis(4‐fluorophenyl) sulfone with di(benzimidazolyl)benzene sulfone via an N–C coupling reaction. The structure of the polymer was characterized by Fourier transform IR spectroscopy, ¹H NMR spectroscopy and elemental analysis, and the results showed agreement with the proposed structure. DSC and thermogravimetric measurements showed that PABIS possesses a high glass transition temperature (T_g = 321 °C) and good thermal stability with high decomposition temperature (T_d > 530 °C). Additionally, PABIS exhibits good solubility in most polar organic solvents. Based on the good chemical and physical properties, hollow PABIS microspheres with diameters in the range 0.3–1.8 mm were prepared by the micro‐liquid technique and the double‐layer latex technique. A new double T‐channel droplet generator was developed for continuous fabrication of controlled‐size hollow PABIS microspheres. The structures of the hollow PABIS microspheres were characterized, and they possessed equal wall thickness and good spherical symmetry. © 2013 Society of Chemical Industry     

Poly[6‐(2,6‐bis(1′‐methylbenzimidazolyl)pyridin‐4‐yloxy)hexyl acrylate] (PBIP) and its terbium (III) complex (PBIP‐Tb3+): Homopolymerization,optical, and magnetic performance

Poly[6‐(2,6‐bis(1′‐methylbenzimidazolyl)pyridin‐4‐yloxy)hexyl acrylate] (PBIP) and its terbium complex (PBIP‐Tb³⁺) were prepared and characterized by ¹H NMR and FT‐IR. The optical properties of PBIP‐Tb³⁺ complex were characterized by UV–vis spectroscopy and fluorescence spectroscopy. Both polymer PBIP and PBIP‐Tb³⁺ complex show good thermal stability. The magnetic property of PBIP‐Tb³⁺ complex was measured as a function of temperature (5–300 K) at 30 kOe and as a function of an external field (?50 to 50 kOe) at 5 K. Magnetic hysteresis loop of PBIP‐Tb³⁺ complex at 5 K shows typical “S” shape and PBIP‐Tb³⁺ complex is soft ferromagnetic. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44249.     

Synthesis,characterization, and comparison of properties of novel fluorinated poly(imide siloxane) copolymers

Four new poly(imide siloxane) copolymers were prepared by a one‐pot solution imidization method at a reaction temperature of 180°C in ortho‐dichlorobenzene as a solvent. The polymers were made through the reaction of o‐diphthaleic anhydride with four different diamines—4,4′‐bis(p‐aminophenoxy‐3,3″‐trifluoromethyl) terphenyl, 4,4′‐bis(3″‐trifluoromethyl‐p‐aminobiphenyl ether)biphenyl, 2,6‐bis(3′‐trifluoromethyl‐p‐aminobiphenyl ether)pyridine, and 2,5‐bis(3′‐trifluoromethyl‐p‐aminobiphenylether)thiopene—and aminopropyl‐terminated poly dimethylsiloxane as a comonomer. The polymers were named 1a , 1b , 1c , and 1d , respectively. The synthesized polymers showed good solubility in different organic solvents. The resulting polymers were well characterized with gel permeation chromatography, IR, and NMR techniques. ¹H‐NMR indicated that the siloxane loading was about 36%, although 40 wt % was attempted. ²⁹Si‐NMR confirmed that the low siloxane incorporation was due to a disproportionation reaction of the siloxane chain that resulted in a lowering of the siloxane block length. The films of these polymers showed low water absorption of 0.02% and a low dielectric constant of 2.38 at 1 MHz. These polyimides showed good thermal stability with decomposition temperatures (5% weight loss) up to 460°C in nitrogen. Transparent, thin films of these poly(imide siloxane)s exhibited tensile strengths up to 30 MPa and elongations at break up to 103%, which depended on the structure of the repeating unit. The rheological properties showed ease of processability for these polymers with no change in the melt viscosity with the temperature. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization and thermal degradation of poly[2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate]

In this work, 2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate (BPHEMA) [monomer] was synthesized by the addition of methacrylic acid to 1‐epoxyethyl‐3‐bromophenyl‐3‐methyl cyclobutane. The monomer and poly(BPHEMA) were characterized by FT‐IR and [¹H] and [¹³C]NMR. Average molecular weight, glass transition temperature, solubility parameter, and density of the polymer were also determined. Thermal degradation of poly[BPHEMA] was studied by thermogravimetry (TG), FT‐IR. Programmed heating was carried out at 10 °C min⁻¹ from room temperature to 500 °C. The partially degraded polymer was examined by FT‐IR spectroscopy. The degradation products were identified by using FT‐IR, [¹H] and [¹³C]NMR and GC‐MS techniques. Depolymerization is the main reaction in thermal degradation of the polymer up to about 300 °C. Percentage of the monomer in CRF (Cold Ring Fraction) was estimated at 33% in the peak area of the GC curve. Intramolecular cyclization and cyclic anhydride type structures were observed at temperatures above 300 °C. The liquid products of the degradation, formation of anhydride ring structures and mechanism of degradation are discussed. © 1999 Society of Chemical Industry     

Poly(amides) and poly(imides) containing silicon and germanium in the main chain: Synthesis,characterization and thermal studies

Poly(amides) and poly(imides) containing the heteroatoms Si or Ge in the main chain and bonded to four carbon atoms were synthesized and characterized by IR and ¹H, ¹³C and ²⁹Si NMR. The acid dichlorides bis(4‐chloroformylphenyl)‐dimethylgermane, bis(4‐chloroformylphenyl)‐diphenylgermane, bis(4‐chloroformylphenyl)‐dimethylsilane, and bis(4‐chloroformylphenyl)‐diphenylsilane were synthesized from the ditolyl derivatives, which were oxidized to the respective diacids. The dianhydrides bis(3,4‐dicarboxyphenyl)‐dimethylgermane dianhydride, bis(3,4‐dicarboxyphenyl)‐diphenylgermane dianhydride, bis(3,4‐dicarboxyphenyl)‐dimethylsilane dianhydride, and bis(3,4‐dicarboxyphenyl)‐diphenylsilane dianhydride were synthesized from the dixylyl derivatives, which were oxidized to the tetraacids. Fully aromatic diamines also containing Si or Ge were synthesized from 4‐bromo‐N,N‐bis(trimethylsilyl)‐aniline and diphenyl‐dichlorosilane or germane. The ditolyl and dixylyl derivatives were synthesized from 4‐bromo‐toluene or 4‐bromo‐xylene and dimethyl‐ or diphenyl‐dichlorogermane, dimethyl‐ or diphenyl‐dichlorosilane. The glass transition temperatures and the thermal stability were determined showing in general that the polymers with Si atom in the main chain presented higher values of both parameters due to the higher ionic character of the C? Si bond compared with the C? Ge one, and due to the lower size of the Si atom that presents lower rotational barriers. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 2768–2776, 2006     

Synthesis and Characterization of Sulfonated Cardo Poly(Arylene Ether Sulfone)s for Fuel Cell Proton Exchange Membrane Application

Sulfonated cardo poly(arylene ether sulfone)s ( SPPA ‐ PES ) with various degrees of sulfonation (DS) were prepared by post‐sulfonation of synthesized phenolphthalein anilide ( PPA ; N‐phenyl‐3,3′‐bis(4‐hydroxyphenyl)‐1‐isobenzopyrolidone) poly(arylene ether sulfone)s ( PPA ‐ PES ) by using concentrated sulfuric acid. PPA ‐ PES copolymers were synthesized by direct polycondensation of PPA with bis‐(4‐fluorophenyl)‐sulfone and 4,4′‐sulfonyldiphenol. The DS was varied with different mole ratios of PPA (24, 30, 40, 50 mol.%) in the polymer. The structure of the resulting SPPA ‐ PES copolymers and the different contents of the sulfonated unit were studied by Fourier transform infrared (FT‐IR) spectroscopy, ¹H NMR spectroscopy, and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymer with water. The ion exchange capacity (IEC) and proton conductivity of SPPA ‐ PES were evaluated according to the increase of DS. The water uptake (WU) of the resulting SPPA ‐ PES membranes was in the range of 20–72%, compared with 28% for Nafion 211®. The SPPA ‐ PES membranes showed proton conductivities of 23–82 mS cm^–1, compared with 194 mS cm^–1 for Nafion 211®, under 100% relative humidity (RH) at 80 °C.     

Tris(trimethylsilyl)methyl functionalized 4‐chloromethyl styrene polymers: Effects of side chain modification on polymer structure and glass transition temperature

4‐Chloromethyl styrene was copolymerized with various molar ratio of methyl methacrylate or ethyl methacrylate by solution free radical polymerization method, at 70 ± 1°C using α,α′‐azobis(isobutyronitrile) as an initiator. Then, very highly sterically hindered tris(trimethylsilyl)methyl substituent was covalently linked to the obtained copolymers with liberation of chlorine atoms. The structure of all polymers was characterized and confirmed by FT‐IR, ¹H and ¹³C NMR spectroscopy techniques. The average molecular weight and glass transition temperature of polymers were determined using gel permeation chromatograph and differential scanning calorimeter instruments, respectively. Study of differential scanning calorimetry analyses showed that chemical modification of 4‐chloromethyl styrene copolymers with tris(trimethylsilyl)methyl substituents leads to an increase in the rigidity and glass transition temperature of polymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 633–639, 2006     

Laser Initiation of Tris(carbohydrazide)metal(II) Perchlorates and Bis(carbohydrazide)diperchlorato‐copper(II)

The literature‐known tris(carbohydrazide)metal(II) perchlorates [M(CHZ)₃](ClO₄)₂ (MMg²⁺ ( 1 ), Mn²⁺ ( 2 ), Co²⁺ ( 3 ), Ni²⁺ ( 4 ), and Zn²⁺ ( 5 )) and the bis(carbohydrazide)diperchloratocopper(II) ( 6 ) were prepared and characterized by elemental analysis, IR and Vis/NIR spectroscopy. The sensitivities toward mechanical, thermal, and electrical stimuli were determined for all complexes 1 – 6 . Following, confined samples of 1 – 6 were irradiated with a monopulsed laser beam at a wavelength of 940 nm. The function times between beginning irradiation and complete decomposition (“breakout” at the end of the device) were measured. Further, the influence of light‐absorbing additives was investigated to proof if the laser initiation mechanism might be photothermal or photochemical. Addition of 1 % active carbon to the samples decreased the function time and the correlated initiation threshold enormously. This was an indication that the initiation mechanism seems to be thermal.     

Ionic liquid‐catalyzed aminolysis of poly(ethylene terephthalate) waste

Aminolytic depolymerization of poly(ethylene terephthalate) (PET) bottle waste with ethanolamine and hydrazine hydrate under atmospheric conditions was investigated in the presence of room temperature ionic liquids. 1‐Hexyl‐3‐methylimidazolium trifluoromethanesulfonate (Hmim.TfO) and 1‐butyl‐3‐methylimidazolium hydrogen sulfate (Bmim.HSO₄). (Hmim.TfO) was found to be the most efficient catalyst to obtain high yields of the aminolysis products bis(2‐hydroxy ethylene) terephthalamide and terephthalic dihydrazide using ethanolamine and hydrazine hydrate, respectively. These products were characterized by IR spectroscopy, ¹H NMR, ¹³C NMR, mass spectroscopy, and differential scanning calorimetry. The influence of experimental parameters, such as the amount of catalyst, reaction time, molar ratio of ethanolamine, and hydrazine hydrate with respect to PET was investigated. This protocol proves to be efficient and environmentally benign in terms of high yields (>84%) and low reaction times (up to 30 min). © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012