Effect of filler loading on cure time and swelling behaviour of SMR L/ENR 25 and SMR L/SBR blends

The effect of filler loading on the cure time (t₉₀) and swelling behaviour of SMR L/ENR 25 and SMR L/SBR blends has been studied. Carbon black (N330), silica (Vulcasil C) and calcium carbonate were used as fillers and the loading range was from 0 to 40 phr. Results show that for SMR L/ENR 25 blends the cure time decreases with increasing carbon black loading, whereas silica shows an increasing trend, and calcium carbonate does not show significant changes. For SMR L/SBR blends, the cure time of carbon black, silica and calcium carbonate generally decreases with increasing filler loading. The percentage swelling in toluene and ASTM oil no 3 decreases for both blends with increasing filler loading, with calcium carbonate giving the highest value, followed by silica‐ and carbon black‐filled blends. At a fixed filler loading, SMR L/ENR 25 blend shows a lower percentage swelling than SMR L/SBR blends. © 2003 Society of Chemical Industry     

Effect of blend ratio on Mooney scorch time of rubber blends

The Mooney scorch times of three rubber blends [epoxidized natural rubber (ENR) 50/SMR L, ENR 50/styrene butadiene rubber (SBR), and Standard Malaysian Rubber SMR L/SBR] were studied in the temperature range of 120–160°C using an automatic Mooney viscometer. N-Cyclohexyl-2-benzothiazyl sulfenamide was used as the accelerator, and the rubber formulation was based on the conventional vulcanization system. Results for the blends investigated indicate that a negative deviation of scorch time from the interpolated value was observed, especially for temperatures lower than 130°C. This observation was attributed to the induction effect of the ENR 50 in the ENR 50/SMR L and ENR 50/SBR blends to produce more activated precursors to crosslinks, thus enhancing interphase crosslinking. To a lesser extent, SMR L also exhibited such an induction effect in the SMR L/SBR blend. At 120°C, maximum induction effect occurred at around a 40% blend ratio of ENR 50 and SMR L in the respective blends. For the filled stock at 140°C, carbon black exhibited less effect on the scorch property of the blends compared to silica. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1301–1305, 1998     

Effects of palm oil fatty acid on curing characteristics,reversion and fatigue life of various natural rubber compounds

The effects of palm oil fatty acid concentration (0, 1, 3, 5, 7 phr) and epoxidation on curing characteristics, reversion and fatigue life of carbon black filled natural rubber compounds have been studied. Three different types of natural rubber, SMR L, ENR 25 and ENR 50 having 0, 25 and 50 mol% of epoxidation and conventional sulphur vulcanization were used. The cure time t₉₀, scorch time t₂, M_HR − M_L (maximum torque − minimum torque) and fatigue life of all rubbers were found to increase with increasing palm oil fatty acid concentration. However, the reversion of all rubbers decreases with increasing palm oil fatty acid concentration. At similar concentrations of palm oil fatty acid, ENR 50 compounds exhibit the shortest scorch and cure times followed by ENR 25 and SMR L compounds. For reversion, SMR L compounds show the lowest value followed by ENR 50 and ENR 25 compounds, whereas for fatigue life, the highest value is obtained with ENR 50 compounds followed by ENR 25 and SMR L compounds. © 1999 Society of Chemical Industry     

Adhesion properties of pressure-sensitive adhesives prepared from SMR 10/ENR 25, SMR 10/ENR 50, and ENR 25/ENR 50 blends

The adhesion properties, i.e. viscosity, tack, and peel strength of pressure-sensitive adhesives prepared from natural rubber/epoxidized natural rubber blends were investigated using coumarone-indene resin and toluene as the tackifier and solvent respectively. One grade of natural rubber (SMR 10) and two grades of epoxidized natural rubbers (ENR 25 and ENR 50) were used to prepare the rubber blends with blend ratio ranging from 0 to 100%. Coumarone-indene resin content was fixed at 40 parts per hundred parts of rubber (phr) in the adhesive formulation. The viscosity of adhesive was measured by a HAAKE Rotary Viscometer whereas loop tack and peel strength was determined using a Lloyd Adhesion Tester operating at 30 cm/min. Results show that the viscosity of the adhesive passes through a minimum value at 20% blend ratio. For loop tack and peel strength, it indicates a maximum at 60% blend ratio for SMR 10/ENR 25 and SMR 10/ENR 50 systems. However, for ENR 25/ENR 50 blend, maximum value is observed at 80% blend ratio. SMR 10/ENR 25 blend consistently exhibits the best adhesion property in this study, an observation which is attributed to the optimum compatibility between rubbers and wettability of adhesive on the substrate. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Curing Characteristics and Mechanical and Morphological Properties of Styrene Butadiene Rubber/Virgin Acrylonitrile-Butadiene Rubber (SBR/vNBR) and Styrene Butadiene Rubber/Recycled Acrylonitrile-Butadiene Rubber (SBR/rNBR) Blends

Curing characteristics and mechanical and morphological properties of styrene butadiene rubber/virgin acrylonitrile-butadiene rubber (SBR/vNBR) and styrene butadiene rubber/recycled acrylonitrile-butadiene rubber (SBR/rNBR) were investigated. Results indicated that the curing characteristics, such as scorch time, t₂, and cure time, t₉₀, of SBR/vNBR and SBR/rNBR blends decreased with increasing vNBR and rNBR content. At similar blend ratios, particularly up to 15 phr, SBR/rNBR blends exhibited higher t₂ and t₉₀ compared with SBR/vNBR blends. Minimum torque (ML) and maximum torque (MH) of SBR/vNBR blends significantly increased with increasing vNBR content. For SBR/rNBR blends, ML increased with increasing rNBR content, but MH exhibited the opposite trend. Tensile strength, elongation at break (E_b), resilience, and fatigue decreased with increasing virgin and recycled NBR content in both blends. Up to 15 phr, the tensile strength, E_b and fatigue life (Kc) of SBR/rNBR blends were higher than in SBR/vNBR blends. The M100 (stress at 100% elongation), hardness, and cross-linking density of both blends also showed an increasing trend with increasing vNBR and rNBR content. The scanning electron microscopy study indicates that rNBR exhibited a weak rNBR-SBR matrix interaction particularly when more than 15 phr of rNBR was used, thus decreasing the mechanical properties of SBR/rNBR blends.     

Curing Characteristics,Fatigue and Hysteresis Behaviour of Feldspar Filled Natural Rubber Vulcanizates

Curing characteristics, fatigue, and hysteresis behaviour of feldspar filled SMR L vulcanizates and feldspar filled ENR 50 vulcanizates were studied. Two different types of natural rubber, SMR L and ENR 50 having 0 and 50 mol% of epoxide groups were used. The feldspar filled natural rubber vulcanizates were compared at similar filler loading which were used at 0, 10, 20, and 30 phr of filler loading. The curing characteristics such as scorch time (t ₂) and cure time (t ₉₀) slightly increased with increasing feldspar loading for both rubber vulcanizates. Besides t ₂ and t ₉₀, maximum torque (M _HR) significantly increased for both rubbers with increasing feldspar loading. The fatigue test showed that fatigue life decreased with increasing extension ratio, strain energy and filler loading. As the filler loading increased, the poor wetting of the feldspar by the rubber matrix gave rise to poor interfacial adhesion between filler and rubber matrix. Results also indicate that the vulcanizates with the highest feldspar loading exhibited the highest hysteresis. The feldspar filled SMR L vulcanizates showed higher fatigue life and lower hysteresis compare to feldspar filled ENR 50 vulcanizates.     

The Effect of Electron Beam (EB) Irradiation in Presence of TMPTA on Cure Characteristics and Mechanical Properties of Styrene Butadiene Rubber/Recycled Acrylonitrile-Butadiene Rubber (SBR/NBRr) Blends

The effect of electron beam (EB) irradiation on the cure characteristics and mechanical properties of unirradiated and irradiated SBR/NBRr blends were investigated. The SBR/NBRr blends were prepared at 95/5, 85/15, 75/25, 65/35, and 50/50 blend ratio with and without the presence of a polyfunctional monomer, trimethylolpropane triacrylate (TMPTA). Results indicated that the scorch time t₂, cure time t₉₀ and minimum torque (M_L) of irradiated SBR/NBRr blend decreased, but the maximum torque (M_H) particularly at 35 and 50 phr of NBRr (recycled NBR) increased with the presence of TMPTA. The stress at 100% elongation (M100), hardness, cross-linking density and tensile strength (particularly after 15 phr of NBRr content) of irradiated SBR/NBRr blends increased after irradiation but the elongation at break (EB) and resilience decreased. The irradiated SBR/NBRr blends showed lower thermal stability than non-irradiated blends. Scanning electron microscopy proved the enhancement in tensile strength when more NBRr were added in SBR matrix where the irradiated surfaces demonstrate more irregularity with increasing crack branching (fracture planes are located at different heights) due to the increased of cross-linked density.     

THE EFFECTS OF A MULTIFUNCTIONAL ADDITIVE ON CURING CHARACTERISTICS,MECHANICAL PROPERTIES,AND SWELLING BEHAVIOR OF NATURAL RUBBER/POLYCHLOROPRENE RUBBER BLENDS

The effects of a diamine salt of fatty acid of general structure [RNH₂ ⁺[CH₂)₃NH⁺] [R′COO^?]₂ referred to as a multifunctional additive (MFA) on curing characteristics and mechanical properties and swelling behavior of natural rubber (SMR L) and polychloroprene (CR) rubber blends were studied. Compared to SMR L/CR blends without MFA, the incorporation of 2 phr (parts per hundred parts of rubber) of MFA in the blends increased mechanical properties, i.e., tensile strength, tensile modulus and hardness, and improved swelling resistance toward toluene and ASTM oil No. 1. However the scorch time, t ₅ and cure index, Δt _L decrease with incorporation of MFA into the blends.     

Properties of Halloysite Nanotube (HNT) Filled SMR L and ENR 50 Nanocomposites

Various HNTs loading filled SMR L and ENR 50 were prepared. Addition of HNTs caused increments in scorch time, cure time, tensile modulus, and thermal stability of nanocomposites. Optimum tensile strength of nanocomposites was achieved at 20 phr loading. Elongation at break, swelling percentage, and fatigue life decreased with increasing HNTs loading. ENR 50 nanocomposites show shorter scorch time, longer cure time, and lower curing rate index than SMR L nanocomposites. ENR 50 nanocomposites also show higher tensile modulus and thermal stability than SMR L nanocomposites. SEM images show that HNTs can be dispersed more uniformly at lower filler loading.     

STYRENE–BUTADIENE RUBBER/EPOXIDIZED NATURAL RUBBER BLENDS: THE EFFECT OF VULCANIZATION SYSTEM ON BLENDS PROPERTIES

The dynamic properties, curing characteristics, and swelling behavior of the blends cured using two types of vulcanization systems [i.e., conventional vulcanization (CV) and semiefficient vulcanization (semi-EV)] were investigated. Results indicate that the maximum elastic torque (S′ @MH) and the torque difference, S′ @MH–S′ @ML (maximum elastic torque minus minimum elastic torque) increased with the increasing epoxidized natural rubber (ENR) composition in the blend. However, a reverse trend was observed for tan δ @MH and viscous torque (S″ @MH). At a similar blend ratio, the CV system gives a higher S′ @MH and torque difference but a lower tan δ @MH and S″ @MH than the semi-EV system. The scorch time, t ₂ and cure time, t ₉₀, decreased with increasing ENR composition in the blends. Semi-EV system blends exhibit shorter t ₂ and t ₉₀ than CV system blends. The swelling degree decreased with increasing ENR composition in the blends and the CV system blends show better oil-swelling resistance.     

Dependence of Mooney scorch time of SMR L,ENR 25, and ENR 50 on concentration and types of antioxidants

The effect of concentration of antioxidants on the Mooney scorch time of two grades of epoxidized natural rubbers (ENR 25 and ENR 50) and one grade of natural rubber (SMR L) was studied using a Monsanto automatic Mooney viscometer (MV 2000). Three types of antioxidants, viz., 2,2′‐methylene‐bis(4‐methyl, 6‐tertbutylphenol) (AO 2246), N‐isopropyl‐N′‐phenyl‐p‐phenylenediamine (IPPD) and poly‐2,2,4‐trimethyl‐1,2‐dihydroquinoline (TMQ) were used, and the concentration range was varied from 0 to 5 phr. The conventional vulcanization system with 2‐mercaptobenzothiazole (MBT) as the accelerator was used throughout the study. Results show that increasing the phenol‐based antioxidant (AO 2246) concentration will increase the scorch time of ENR at a lower temperature of vulcanization while its effect on SMR L is not significant. This retardation effect is attributed to the “solvation” of epoxide group by the phenolic group in AO 2246, thus reducing the activation of adjacent double bond in ENR. The scorch time, however, is shortened by the amine‐based antioxidants (IPPD and TMQ) for the three rubbers studied, a phenomenon associated with the ability of the amine group to enhance the formation of more active sulfurating agent and subsequently increases the cure rate as the concentration of the amine‐based antioxidants is increased. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2940–2946, 1999     

The Effect of Rice Husk Powder on Standard Malaysian Natural Rubber Grade L (SMR L) and Epoxidized Natural Rubber (ENR 50) Composites

The effects of rice husk powder (RHP) loading and two types of natural rubber matrix (SMR L and ENR 50) on curing characteristics and mechanical properties were studied. The scorch time and cure time decreased with increasing RHP loading whereas maximum torque showed an increasing trend. SMR L composites possessed longer scorch time and cure time than ENR 50 composites. Incorporation of RHP into both rubbers improved tensile modulus significantly but decreased tensile strength and elongation at break. SMR L composites exhibited the lower tensile modulus and higher tensile strength and elongation at break than ENR 50 composites.     

Properties of styrene butadiene rubber (SBR)/recycled acrylonitrile butadiene rubber (NBRr) blends: The effects of carbon black/silica (CB/Sil) hybrid filler and silane coupling agent,Si69

The recycling or reuse of waste rubber by means of blending together with polymeric materials in addition of filler such as hybrid carbon black and silica (CB/Sil) to a polymer system can provides an opportunity to explore alternative product specifications. Therefore, in this work the investigation of recycled rubber blends based on styrene butadiene rubber/recycled acrylonitrile butadiene rubber (SBR/NBRr) blends reinforced with 50/0, 40/10, 30/20, 20/30, 40/10, 0/50 phr of carbon black/silica (CB/Sil) hybrid filler treated with and without silane coupling agent (Si69) were determined. Cure characteristics, tensile properties, and morphological behavior of selected SBR/NBRr blends at a fix 85/15 blend ratio were evaluated. Results showed that, cure time t₉₀, minimum torque (M_L), and maximum torque (M_H) of CB/Sil hybrid fillers filled SBR/NBRr blends with and without Si69 increased as silica content increased. However, t₉₀ and M_L of SBR/NBRr blends with Si69 were lower than without Si69 except for (M_H). The optimum scorch time (t_s2) of SBR/NBRr blends with and without Si69 was obtained at 30/20 phr of CB/Sil hybrid filler. However, t_s2 of SBR/NBRr blends with Si69 were longer than SBR/NBRr blends without Si69. The incorporation of Si69 has improved the tensile properties [(tensile strength, elongation at break (E_b), stress at 100% elongation (M100), and stress at 300% elongation (M300)] of CB/Sil hybrid fillers filled SBR/NBRr blends. These properties were influenced by the degree of crosslinked density as the silica content is increased. Scanning electron microscopy (SEM) of the tensile fracture surfaces indicated that, with the addition of Si69 improved the dispersion of hybrid fillers and NBRr in SBR/NBRr matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A study about the structure of vulcanized natural rubber/styrene butadiene rubber blends and the glass transition behavior

A study of the thermal behavior of cured elastomeric blends of natural rubber (NR) and styrene butadiene rubber (SBR) prepared by solution blending in toluene is presented. Binary blends with different compositions of NR/SBR were produced using a conventional cure system based on sulfur and TBBS (n-t-butyl-2-benzothiazole sulfonamide as accelerator. The compounds were vulcanized at 433 K up to an optimum time of cure determined by rheometric tests. From swelling tests, the crosslink densities of the compounds were obtained and compared with those obtained in similar blends prepared by mechanical mixing. The results were analyzed in terms of the disentangling of the chain structures of the SBR and NR phases and the achieved cure state of the blend. Using differential scanning calorimetry, the glass transition temperature T_g of each blend was measured. In most compounds, the value of T_g corresponding to each phase of the blend was determined, but in some blends a single value of T_g was obtained. The variation of T_g with the composition and cure level in each phase was analyzed. On the other hand, a physical mixture of two equal parts of NR and SBR vulcanized was measured and the results were compared to those of the NR50/SBR50 cured blend. Besides, to analyze the influence of the network structure, pure NR and SBR unvulcanized samples were measured. On the basis of all the obtained results, the influence of the interphase formed in the blend between SBR and NR phases is discussed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A Comparative Study on Curing Characteristics,Mechanical Properties,Swelling Behavior,Thermal Stability,and Morphology of Feldspar and Silica in SMR L Vulcanizates

Abstract

Comparison studies on effects of feldspar and silica (Vulcasil C) as a filler in (SMR L grade natural rubber) vulcanizates on curing characteristics, mechanical properties, swelling behavior, thermal analysis, and morphology were examined. The incorporation of both fillers increases the scorch time, t ₂, and cure time, t ₉₀, of SMR L vulcanizates. At a similar filler loading, feldspar exhibited longer t ₂ and t ₉₀ but lower values of maximum torque, M_HR, and torque difference, M_HR–M_L than did silica-filled SMR L vulcanizates. For mechanical properties, both fillers were found to be effective in enhancing the tensile strength (up to 10 phr), tensile modulus, and hardness of the vulcanizates. However, feldspar-filled SMR L vulcanizates showed lower values of mechanical properties than did silica-filled SMR L vulcanizates. Swelling measurement indicates that swelling percentages of both fillers-filled SMR L vulcanizates decrease with increasing filler loading whereas silica shows a lower swelling percentage than feldspar-filled SMR L vulcanizates. Scanning electron microscopy (SEM) on fracture surface of tensile samples showed poor filler–matrix adhesion for both fillers with increasing filler loading in the vulcanizates. However, feldspar-filled SMR L vulcanizates showed poorer filler–matrix adhesion than did silica-filled SMR L vulcanizates. Thermogravimetric analysis (TGA) results indicate that the feldspar-filled SMR L vulcanizates have higher thermal stability than do silica-filled SMR L vulcanizates.     

The Effect of Epoxidized Natural Rubber (ENR-50) or Polyethylene Acrylic Acid (PEA) as Compatibilizer on Properties of Ethylene Vinyl Acetate (EVA)/Natural Rubber (SMR L) Blends

The effect of epoxidized natural rubber (ENR) or polyethylene acrylic acid (PEA) as a compatibilizer on properties of ethylene vinyl acetate (EVA)/natural rubber (SMR L) blends was studied. 5 wt.% of compatibilizer was employed in EVA/SMR L blend and the effect of compatibilizer on tensile properties, thermal properties, swelling resistance, and morphological properties were investigated. Blends were prepared by using a laboratory scale of internal mixer at 120°C with 50 rpm of rotor speed. Tensile properties, thermal properties, thermo-oxidative aging resistance, and oil swell resistance were determined according to related ASTM standards. The compatibility of EVA/SMR L blends with 5 wt.% of compatibilizer addition or without compatibilizing agent was compared. The EVA/SMR L blend with compatibilizer shows substantially improvement in tensile properties compared to the EVA/SMR L blend without compatibilizer. Compatibilization had reduced interfacial tension and domain size of ethylene vinyl acetate (EVA)/natural rubber (SMR L) blends.     

Effect of epoxidized natural rubber on thermal properties,fatigue life,and natural weathering test of styrene butadiene rubber/recycled acrylonitrile‐butadiene rubber (SBR/NBRr) blends

The utilization of waste rubber powder in polymer matrices provides an attractive strategy for polymer waste disposal. Addition of recycled acrylonitrile‐butadiene rubber (NBRr) in rubber compounds gives economic (lowering the cost of rubber compounds) as well as processing advantages. In this study, the properties of styrene butadiene rubber (SBR)/NBRr blends with and without epoxidized natural rubber (ENR‐50) as a compatibilizer were determined. The results such as thermal gravimetric analysis (TGA), fatigue life, and natural weathering test of SBR/NBRr blends with and without ENR‐50 were carried out. Results showed that TG thermograms of SBR/NBRr blends with ENR‐50 show lower thermal stability compared blends without ENR‐50. The incorporation of ENR‐50 into SBR/NBRr blends has reduced char residue compared SBR/NBRr blends without ENR‐50. The incorporation of ENR‐50 in SBR/NBRr blends has increased the rigidity of the blends thus lowering the fatigue life. The increment in tensile properties retention of SBR/NBRr blends with ENR‐50 indicated the enhancement on weathering resistant. The surfaces of SBR/NBRr blends with ENR‐50 after 6 months exposure showed a minimal severity of crack compared with SBR/NBRr blends without ENR‐50. It revealed that the scale of cracks has reduced indicating well‐retaining interfacial adhesion between SBR and NBRr with the presence of ENR‐50 as a compatibilizer. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Novel ternary blends of natural rubber/linear low-density polyethylene/thermoplastic starch: influence of epoxide level of epoxidized natural rubber on blend properties

Novel degradable materials based on ternary blends of natural rubber (NR)/linear low-density polyethylene (LLDPE)/thermoplastic starch (TPS) were prepared via simple blending technique using three different types of natural rubber (i.e., unmodified natural rubber (RSS#3) and ENR with 25 and 50 mol% epoxide). The evolution of co-continuous phase morphology was first clarified for 50/50: NR/LLDPE blend. Then, 10 wt% of TPS was added to form 50/40/10: NR/LLDPE/TPS ternary blend, where TPS was the particulate dispersed phase in the NR/LLDPE matrix. The smallest TPS particles were observed in the ENR-50/LLDPE blend. This might be attributed to the chemical interactions of polar functional groups in ENR and TPS that enhanced their interfacial adhesion. We found that ternary blend of ENR-50/LLDPE/TPS exhibited higher 100 % modulus, tensile strength, hardness, storage modulus, complex viscosity and thermal properties compared with those of ENR-25/LLDPE/TPS and RSS#3/LLDPE/TPS ternary blends. Furthermore, lower melting temperature (T _m) and heat of crystallization of LLDPE (?H) were observed in ternary blend of ENR-50/LLDPE/TPS compared to the other ternary blends. Also, neat TPS exhibited the fastest biodegradation by weight loss during burial in soil for 2 or 6 months, while the ternary blends of NR/LLDPE/TPS exhibited higher weight loss compared to the neat NR and LLDPE. The lower weight loss of the ternary blends with ENR was likely due to the stronger chemical interfacial interactions. This proved that the blend with ENR had lower biodegradability than the blend with unmodified NR.     

Mechanical Properties and Thermooxidative Aging of a Ternary Blend,Pvc/Enr/Nbr,Compared with the Binary Blends of Pvc

In the quest to improve the thermooxidative aging of the poly(vinyl chloride)/epoxidized natural rubber (PVC/ENR) blend, nitrile rubber (NBR) was incorporated into the blend to yield a ternary blend of PVC/ENR/NBR. A Brabender Plasticorder with a mixing attachment was used to perform the melt mixing at 150°C and 50 rpm followed by compression molding. The mechanical properties, dynamic mechanical properties, and thermooxidative aging behavior of the ternary blend were compared with those of the binary blends (i.e., PVC/ENR and PVC/NBR). It was found that the ternary blend exhibits mechanical properties which are superior to those of PVC/ENR. A single glass transition temperature (T _g) obtained from dynamic mechanical analysis coupled with synergism in the modulus and some other mechanical properties indicate that PVC, ENR, and NBR form a single phase (miscible system) in the ternary blend. Di-2-ethyl hexylphthalate (DOP) plasti-cizer improves the aging resistance of the blends generally, whereas the presence of CaCO₃ as a filler only imparts minor influences on the properties and aging resistance of the blends.     

Homogeneous Styrene Butadiene/Acrylonitrile Butadiene Rubber Blends

The graft copolymerization of acrylonitrile (AN) onto butadiene rubber (BR) was carried out in toluene at 80°C, using dibenzoyl-peroxide (BPO) as initiator. The synthesized poly acrylonitrile-grafted-butadiene rubber (AN-g-BR) was characterized by N% elemental analysis and Fourier-transform infrared (FT-IR) spectroscopy. Styrene butadiene rubber/acrylonitrile butadiene rubber (SBR/NBR) blends were prepared with different blend ratios in presence and absence of AN-g-BR, where the homogeneity of such blends were examined with intrinsic viscosity (η) measurements, differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The scanning electron micrographs illustrate disappearance of the macro-scale phase separation of SBR/NBR rubber blend as a result of the incorporation of AN-g-BR into that blend. Viscosity measurements confirm homogeneity of that blend. Differential Scanning Calorimetry traces exhibit shifts in glass transition temperatures (T _g's) of SBR and NBR in their blend, indicating some degree of homogeneity. Physico-mechanical properties of the rubber blend vulcanizates with different blend ratios, in presence and absence of AN-g-BR, were investigated before and after accelerated thermal aging. The SBR/NBR (25/75) homogeneous blend possessed the best physico-mechanical properties after thermal aging, together with the best swelling behavior in motor oil. The physico-mechanical properties of SBR/NBR (25/75) filled blend with different types of inorganic fillers during thermal aging were studied.