Alkaline protease production by immobilized growing cells of Serratia marcescens with interpolymer complexes of P(TM‐co‐AAm)/PAA

The growing cells of Serratia marcescens (SM) were immobilized with the interpolymer complex carrier, which is formed by the cationic polymer, poly(allyltrimethyl ammonium chloride‐co‐acrylamide) [P(TM‐co‐AAm)], and poly(acrylic acid) (PAA). When the association degree of PAA is suitable to the cationic degree of P(TM‐co‐AAm), the effective crosslinking network provides the most favorable circumstances for the cell immobilization. The alkaline protease can be produced by the immobilized SM with high activity. Compared with the free cells, the immobilized SM has higher thermal stability, acid‐base stability, operational stability, and storage stability. Under the optimum immobilizing conditions, not only the living cells of SM but also thermophilic Bacillus firmus (TBF) were immobilized with the complex of P(TM‐co‐AAm)/PAA. The results show the carrier of P(TM‐co‐AAm)/PAA complex to be superior in properties to the usual carriers, such as Na‐alginate and carrageenan. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 178–183, 2002; DOI 10.1002/app.10293     

Thermosensitive nanoparticles prepared from poly(N‐isopropylacrylamide‐acrylamide‐vinilpyrrolidone) and its blend with poly(lactide‐co‐glycolide) for efficient drug delivery system

Temperature‐responsive polymers have become increasingly attractive as carrier for the injectable drug delivery systems. In the present work, we have studied the preparation of poly(N‐isopropylacrylamide‐acrylamide‐vinilpyrrolidone) (NIPAAm‐AAm‐VP terpolymer) nanoparticulated terpolymer and its blend with poly(lactide‐co‐glycolide, PLGA; molar ratio of lactide/glycolid 1/3). Thermosensitive terpolymer, poly(NIPAAm‐AAm‐VP) was prepared by free‐radical polymerization in aqueous solution. The nanoparticles of poly(NIPAAm‐AAm‐VP) and its blend with PLGA containing naltrexone were prepared using the evaporation and w/o emulsion‐solvent evaporation methods, respectively. Nanoparticles prepared from terpolymer‐PLGA blend at low polymer concentration (5%) shows larger particle size (>300 nm) and higher drug content%. Various types of nanoparticles showed a burst release of less than 10% after 24 h . The results suggest that by regulating different variables, desired release profiles of naltrexone can be achieved using a blend of PLGA‐poly(NIPAAm‐AAm‐VP) nanoparticulate system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Polymer gel electrolytes prepared from P(EG‐co‐PG) and their nanocomposites using organically modified montmorillonite

Polymer gel electrolytes were prepared by thermal crosslinking reaction of a series of acrylic end‐capped poly(ethylene glycol) and poly(propylene glycol) [P(EG‐co‐PG)] having various geometries and molecular weights. Acrylic end‐capped prepolymers were prepared by the esterification of low molecular weight (M_n: 1900–5000) P(EG‐co‐PG) with acrylic acid. The linear increase in the ionic conductivity of polymer gel electrolyte films was observed with increasing temperature. The increase in the conductivity was also monitored by increasing the molecular weight of precursor polymer. Nanocomposite electrolytes were prepared by the addition of 5 wt % of organically modified layered silicate (montmorillonite) into the gel polymer electrolytes. The enhancement of the ionic conductivity as well as mechanical properties was observed in the nanocomposite systems. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 894–899, 2004     

Water‐soluble copolymers. I. Biodegradability and functionality of poly[(sodium acrylate)‐co‐(4‐vinylpyridine)]

As a biodegradable functional polymer, poly[(sodium acrylate)‐co‐(4‐vinylpyridine)] [P(SA‐co‐4VP)] containing a small amounts of 4‐vinylpyridine groups were prepared and their biodegradability, dispersity, and complex performance were analyzed. The polymers can be useful as detergent builders and dispersants. It was found that the biodegradation of P(SA‐co‐4VP) was more conspicuous when content of the 4‐vinylpyridine in the copolymer was larger. This indicates that the 4‐vinylpyridine, which acts as biodegradable segments, should be incorporated into the polymer main chain in such a manner that they are digested by activated sludge. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1953–1957, 1999     

Water‐assisted formation of honeycomb films of poly(L‐lactic‐co‐glycolic acid)

The ordered honeycomb structures of poly(L ‐lactic‐co‐glycolic acid) and poly(D ,L ‐lactic‐co‐glycolic acid) fabricated in a humid atmosphere were reported in this paper. It was found that surfactants were important in the formation of honeycomb films of hydrophobic polymer. The affecting factors, such as the environment temperature, the atmosphere humidity, and the concentration of the polymer solution of the honeycomb porous structure, were also tested. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1013–1018, 2006     

Anthranilic acid assisted preparation of Fe3O4–poly(aniline‐co‐o‐anthranilic acid) nanoparticles

Magnetic Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles were prepared by a novel and simple method: anthranilic acid assisted polymerization. The synthetic strategy involved two steps. First, Fe₃O₄ nanoparticles capped by anthranilic acid were obtained by a chemical precipitation method, and then the aniline and oxidant were added to the modified Fe₃O₄ nanoparticles to prepare well‐dispersed Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles. Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles exhibited a superparamagnetic behavior (i.e., no hysteresis loop) and high‐saturated magnetization (M_s = 21.5 emu/g). The structure of the composite was characterized by Fourier‐transform infrared spectra, X‐ray powder diffraction patterns, and transmission electron microscopy, which proved that the Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles were about 20 nm. Moreover, the thermal properties of the composite were evaluated by thermogravimetric analysis, and it showed excellent thermal stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1666–1671, 2006     

Homogeneous complex solution formed through interactions of poly(acrylamide‐co‐acrylic acid)/poly(acrylamide‐co‐dimethyldiallylammonium chloride) complex with M n+ hydration metal ions in aqueous media

A homogeneous complex solution, formed through inter‐polyelectrolyte complexation of poly(acrylamide‐co‐acrylic acid) (P(AM‐AA)) with poly(acrylamide‐co‐dimethyldiallylammonium chloride) (P(AM‐DMDAAC)) and interaction of the P(AM‐AA)/P(AM‐DMDAAC) complex with M ⁿ⁺ hydrated metal ion, was prepared and the structure and properties of the P(AM‐AA)/P(AM‐DMDAAC)/M ⁿ⁺ homogeneous complex solution were studied by UV spectrometry, dynamic light scattering and viscometry. The experimental results show that the homogeneous complex solution can be obtained by controlling the composition of the P(AM‐AA)/P(AM‐DMDAAC) complex and the M ⁿ⁺ metal ion content. Compared to the constituents, ie the P(AM‐AA) solution, the P(AM‐DMDAAC) solution and the P(AM‐AA)/P(AM‐DMDAAC) complex solution, the P(AM‐AA)/P(AM‐DMDAAC)/M ⁿ⁺ complex solution has a new peak at 270 nm in its UV spectrum, a larger hydrodynamic radius, and hence a higher solution viscosity, all of which indicate that there exist specific interactions between polymers and M ⁿ⁺ metal ions. These interactions lead to the formation of a network structure and hence an obvious increase not only in solution viscosity but also in resistance of the polymer solution to simple salts, to temperature changes and to shearing. © 2001 Society of Chemical Industry     

Effects of Temperature and Surfactants on the Equilibrium Swelling Behavior of Poly[acrylamide‐co‐(itaconic acid)] Hydrogels

Summary: The swelling equilibrium of poly(acrylamide) [PAAm] and poly[acrylamide‐co‐(itaconic acid)] [P(AAm/IA)] hydrogels was studied as a function of temperature and IA content in aqueous solutions of surfactants: sodium dodecyl sulfate (SDS, anionic) and hexadecyltrimethylammonium bromide (HTAB, cationic). P(AAm/IA) hydrogels in water exhibited reentrant conformational transitions depending on temperature, whereas PAAm hydrogels were not affected with the change of temperature. The equilibrium‐volume‐swelling ratio of P(AAm/IA) hydrogels increased sharply in SDS solutions, with an increase of the mole percent of IA. However, in HTAB solution, the equilibrium‐volume‐swelling ratio of these hydrogels decreased with an increase of IA content.

The equilibrium volume‐swelling ratios of the hydrogels in water shown as a function of temperature.     

Preparation and characterization of poly(N‐tert‐butylacrylamide‐co‐acrylamide) ferrogel

Magnetic‐field‐sensitive gel, called ferrogel, was prepared by a two‐step procedure in which first step requires synthesis of the poly(N‐tert‐butylacrylamide‐co‐acrylamide) [P(NTBA‐co‐AAm)] hydrogel and during second step magnetite (Fe₃O₄) particles were formed in the hydrogel via coprecipitation of Fe(II) and Fe(III) ions in alkaline medium at 70°C. The obtained ferrogel was characterized by attenuated total reflectance Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy combined with energy dispersive spectroscopy, and electron spin resonance measurements. The magnetic responsive of the ferrogel was also investigated by applying magnetic field to the ferrogel. The extent of a bending degree of the ferrogel depends on the applied magnetic field strength. In addition, the magnetic responsive studies also indicated that formed magnetite content in the hydrogel is high enough to achieve considerable magnetic response to external magnetic field. As a result, the P(NTBA‐co‐AAm) ferrogel may be useful for potential applications in magnetically controlled drug release systems, magnetic‐sensitive sensors, and pseudomuscular actuators. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Study on synthesis and morphology control of poly(4‐vinylpyridine‐co‐butyl acrylate)/poly(styrene‐co‐butyl acrylate) composite microspheres

Monodispersed crosslinked cationic poly(4‐vinylpyridine‐co‐butyl acrylate) [P(4VP‐BA)] seed latexes were prepared by soapless emulsion polymerization, using 2,2′‐azobismethyl(propionamidine)dihydrochloride (V₅₀) as an initiator and divinylbenzene (DVB) or ethylene glycol dimethacrylate (EGDMA) as a crosslinker. The optimum condition to obtain monodispersed stable latex was investigated. It was found that the colloidal stability of the P4VP latex can be improved by adding an adequate amount of BA (BA/4VP = 1/4, w/w), and adopting a semicontinuous monomer feed mode. Subsequently, poly(4‐vinylpyridine‐co‐butyl acrylate)/Poly(styrene‐co‐butyl acrylate) [P(4VP‐BA)/P(ST‐BA)] composite microspheres were synthesized by seeded polymerization, using the above latex as a seed and a mixture of ST and BA as the second‐stage monomers. The effects of the type of crosslinker, the degree of crosslinking, and the initiators (AIBN and V₅₀) on the morphology of final composite particles are discussed in detail. It was found that P(4VP‐BA)/P(ST‐BA) composite microspheres were always surrounded by a PST‐rich shell when V₅₀ was used as initiator, while sandwich‐like or popcorn‐like composite particles were produced when AIBN was employed. This is because the polarity of the polymer chains with AIBN fragments is lower than for the polymer with V₅₀ fragments, hence leading to higher interfacial tension between the second‐stage PST‐rich polymer and the aqueous phase, and between PST‐rich polymer and P4VP‐rich seed polymer. As a result, the seed cannot be engulfed by the PST‐rich polymer. Furthermore, the decrease of T_g of the second‐stage polymer promoted phase separation between the seeds and the PST‐rich polymer: sandwich‐like particles formed more preferably than popcorn‐like particles. It is important knowledge that various morphologies different from PST‐rich core/P4VP‐rich shell morphology, can be obtained only by changing the initiator, considering P4VP is much more hydrophilic than PST. The zeta potential of composite particles initiated by AIBN in seeded polymerization shifted from a positive to a negative charge. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1190–1203, 2002     

Studies on blends of LLDPE and polar polymers compatibilized by a random copolymer

Compatibilization of blends of linear low‐density polyethylene (LLDPE)–poly(methyl methacrylate) (PMMA) and LLDPE–copolymer of methyl methacrylate (MMA) and 4‐vinylpyridine (poly(MMA‐co‐4VP) with poly(ethylene‐co‐methacrylic acid) (EMAA) have been studied. Mechanical properties of the LLDPE–PMMA blends increase upon addition of EMAA. In order to further improve interfacial adhesion of LLDPE and PMMA, 4‐vinyl pyridine units are introduced into PMMA chains, or poly(MMA‐co‐4VP) is used as the polar polymer. In LLDPE–poly(MMA‐co‐4VP)–EMAA blends, interaction of MAA in EMAA with 4VP of poly(MMA‐co‐4VP) causes a band shift in the infrared (IR) spectra. Chemical shifts of N_1s binding energy in X‐ray photoelectronic spectroscopy (XPS) experiments indicate a transfer of proton from MAA to 4VP. Scanning electron microscopy (SEM) pictures show that the morphology of the blends were improved upon addition of EMAA. Nonradiative energy transfer (NRET) fluorescence results attest that there exists interdiffusion of chromophore‐labeled LLDPE chains and chromophore‐labeled poly(MMA‐co‐4VP) chains in the interface. Based on experimental results, the mechanism of compatibilization is studied in detail. Compatibilization is realized through the interaction between MAA in EMAA with 4VP in poly(MMA‐co‐4VP). © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 967–973, 1999     

Immobilization of yeast alcohol dehydrogenase by entrapment and covalent binding to polymeric supports

Yeast alcohol dehydrogenase (YADH), which catalyzes oxidoreductions of a broad spectrum of substrates, was immobilized by entrapping it into a network of a poly(acrylamide‐co‐hydroxyethyl methacrylate) copolymer and was also covalently bound onto porous chitosan beads activated through glutaraldehyde. Maximum retention of YADH activity achieved was 90 and 24% for entrapment and covalent binding, respectively. The results obtained for thermal, storage, and operational stability of entrapped and covalently bound YADH were compared with free YADH. The immobilized enzyme showed improved thermal and storage stability. The immobilized enzymes also retained 50% activity after six and eight cycles. Enzyme‐catalyzed oxidation of ethanol was observed to be diffusion‐controlled through Lineweaver–Burk plots. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1299–1305, 2001     

Production and characterization of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) co‐polymer by a N2‐fixing cyanobacterium,Nostoc muscorum Agardh

BACKGROUND: Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [P(3HB‐co‐3HV)] co‐polymer has immense potential in the field of environmental and biomedical sciences as biodegradable and biocompatible material. The present study examines a filamentous N₂‐fixing cyanobacterium, Nostoc muscorum Agardh as a potent feedstock for P(3HB‐co‐3HV) co‐polymer production and characterization of co‐polymer film for commercial applications. RESULTS: Under photoautotrophic growth conditions, N. muscorum Agardh accumulated the homopolymer of poly‐β‐hydroxybutyrate (PHB), whereas synthesis of P(3HB‐co‐3HV) co‐polymer was detected under propionate‐ and valerate‐supplemented conditions. Exogenous carbons such as acetate, fructose and glucose supplementation with propionate/valerate was found highly stimulatory for the co‐polymer accumulation; the content reached 58–60% of dry cell weight (dcw) under P‐/N‐deficiencies with 0.4% acetate + 0.4% valerate supplementation, the highest value reported so far for P(3HB‐co‐3HV) co‐polymer‐producing cyanobacterial species. The material properties of the films were studied by mechanical tests, surface analysis and differential scanning calorimetry (DSC). CONCLUSION: N. muscorum Agardh, a photoautotrophic N₂‐fixing cyanobacterium, emerged as a potent host for production of P(3HB‐co‐3HV) co‐polymer with polymer content 60% of dry cell weight. The material properties of the films were found to be comparable with that of the commercial polymer, thus advocating its potential applications in various fields. Copyright © 2012 Society of Chemical Industry     

Relative strength of H‐bonding groups on biodegradable polymer‐based blends in solution

The intermolecular hydrogen bonding interactions between poly(3‐hydroxybutyrate) and poly(styrene‐co‐vinyl phenol) copolymers with mutual solvent epichlorohydrin were thoroughly investigated by steady‐state fluorescence and viscosity techniques. Fluorescence spectroscopy along with viscosity technique was used to asses the intermolecular hydrogen bonding between poly‐(3‐hydroxybutyrate) and its blends with five copolymer samples of styrene–vinyl phenol, containing different proportions of vinyl phenol but similar average molecular weight and polydispersity index. In the case of very low OH contents (2–4 mol %), as expected, both components of poly(3‐hydroxybutyrate) and poly(styrene‐co‐4‐vinylphenol) chains are well separated and remain so independently of the mixed polymer ratio and overall polymer concentration as well. Conversely, when the OH content reaches 5.8 mol % or more, a significant decrease of the intrinsic fluorescence intensity emitted by the copolymer is detected upon addition of aliquots of poly(3‐hydroxybutyrate). In these cases, an average value for the interassociation equilibrium constant, K_A = 8.7, was obtained using a binding model formalism. A good agreement of these results with those obtained from complementary viscosity measurements, through the interaction parameter, Δb, was found. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 900–910, 2006     

The synthesis of PHA‐g‐(PTHF‐b‐PMMA) multiblock/graft copolymers by combination of cationic and radical polymerization

A new and promising method for the diversification of microbial polyesters based on chemical modifications is introduced. Poly(3‐hydroxy alkanoate)‐g‐(poly(tetrahydrofuran)‐b‐poly(methyl methacrylate)) (PHA‐g‐(PTHF‐b‐PMMA)) multigraft copolymers were synthesized by the combination of cationic and free radical polymerization. PHA‐g‐PTHF graft copolymer was obtained by the cationic polymerization of THF initiated by the carbonium cations generated from the chlorinated PHAs, poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBHx) in the presence of AgSbF₆. Therefore, PHA‐g‐PTHF graft copolymers with hydroxyl ends were produced. In the presence of Ce⁺⁴ salt, these hydroxyl ends of the graft copolymer can initiate the redox polymerization of MMA to obtain PHA‐g‐(PTHF‐b‐PMMA) multigraft copolymer. Polymers obtained were purified by fractional precipitation. In this manner, their γ‐values (volume ratio of nonsolvent to the solvent) were also determined. Their molecular weights were determined by GPC technique. The structures were elucidated using ¹H‐NMR and FTIR spectroscopy. Thermal analyses of the products were carried out using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and thermal response behavior of poly(N‐isopropylacrylamide‐co‐a crylic acid) microgels via soap‐free emulsion polymerization based on AIBN initiator

Poly(N‐isopropylacrylamide‐co‐acrylic acid) (poly(NIPAM‐co‐AA)) microgels with different copolymer compositions were prepared through soap‐free emulsion polymerization at 80°C, and 2, 2′‐azobisisobutyronitrile (AIBN) was used as initiator. Scanning electron microscope (SEM) characterization shows that the prepared microgels are regular and smooth and not easy to distort. Result of ¹H‐NMR characterization shows that with increasing of the initial concentration of AA (AA in feed), the AA content in polymer chains increases. The thermal response of microgels latex was investigated by UV‐3010 spectrophometer through detecting the transmittance of the latex at different temperature in the range of 190–900 nm. The thermal response of the poly(NIPAM‐co‐AA) microgels was tested by dynamic light scattering (DLS). The results show that with the increase of AA content in polymer chains, the low critical solution temperature (LCST) of microgels latex first decreases and then increases. Still, with increasing of AA in poly(NIPAM‐co‐AA) microgels, the LCST of microgels first increases and then decreases. The basic reasons causing the changes of LCST of microgels latex and microgels are interpreted clearly in this article from the perspective of hydrogen bonding interaction. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effects of synthesis‐solvent composition and initiator concentration on the swelling behaviour of poly(N‐isopropylacrylamide) P(NIPAAM), poly(NIPAAM‐co‐dimethyl itaconate), and poly(NIPAAM‐co itaconic acid) gels

The effects of synthesis‐solvent composition, initiator concentration, comonomer type and monomer purity on the volume swelling ratios, and polymer‐solvent interaction parameter χ have been investigated as a function of temperature. Non‐ionic N‐isopropylacrylamide (NIPAAM) homopolymer gels, poly[NIPAAM‐co‐(dimethyl itaconate)] (P(NIPAAM‐co‐DMI)) and poly[NIPAAM‐co‐(itaconic acid)] (P(NIPAAM‐co‐IA)) gels containing hydrophobic (DMI) and hydrophilic (IA) comonomers were prepared by free radical polymerization using potassium persulfate (KPS) –N, N, N′, N′‐tetramethyl ethylene diamine (TEMED) (redox initiator) in the presence of an N, N′‐methylene bis(acrylamide) (MBAAM) cross‐linking agent. The synthesis‐solvent composition (40/60 mixture of water/methanol and water) and initiator concentration employed significantly affected the properties of the NIPAAM gels. The transition temperatures of P(NIPAAM‐co‐IA) gels synthesized in water/methanol mixture were higher than that of the gel obtained in water. Furthermore, χ values of the NIPAAM homopolymer gel prepared with higher KPS content was an increasing function of temperature, while χ values of the sample obtained with lower initiator concentration changed around a critical solubility value 0.50. The results obtained also show that the interactions between monomer and solvent molecules in the reaction media (ie composition of the pregel solution) have an important effect on the formation and properties of the network structure (ie pore sizes of the gels). © 2000 Society of Chemical Industry     

Preparation of electrorheological active ionomers from poly(2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine)

In this study, synthesis, characterization, partial hydrolysis, and salt formation of poly(2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine), (poly(HEMA)‐co‐poly‐(4‐VP)) copolymers were investigated. The copolymers were synthesized by free radical polymerization using K₂S₂O₈ as an initiator. By varying the monomer/initiator ratio, chain lengths of the copolymers were changed. The copolymers were characterized by gel permeation chromatography (GPC), viscosity measurements, ¹H and ¹³C NMR and FTIR spectroscopies, elemental analysis, and end group analysis methods. The copolymers were partially hydrolyzed by p‐toluene sulfonic acid monohydrate (PTSA·H₂O) and washed with LiOH_(aq) solution to prepare electrorheological (ER) active ionomers, poly(Li‐HEMA)‐co‐poly(4‐VP). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3540–3548, 2006     

Synthesis of poly(N,N‐diethylacrylamide‐co‐acrylic acid) hydrogels with fast response rate in NaCl medium

A series of thermo‐ and pH‐sensitive poly (N,N‐diethylacrylamide‐co‐acrylic acid) (P(DEA‐co‐AA)) hydrogels were prepared in NaCl aqueous solutions with different concentrations. Swelling and deswelling studies showed that in comparison with conventional P(DEA‐co‐AA) hydrogels (prepared in distilled water), the P(DEA‐co‐AA) hydrogels thus prepared had almost the same volume phase transition temperature (VPTT), but exhibited much faster response rates as the temperature was raised above their VPTT. Besides, the hydrogels prepared by this method had faster response rates in low pH buffer solutions, and the response rates increased with the increased concentration of the NaCl solutions used during the polymerization. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characteristics, and phase behavior of a thermosensitive and pH‐sensitive polyelectrolyte

A series of poly(N‐isopropylacrylamide‐co‐methacrylic acid‐co‐octadecyl acrylate) (poly(NIPAM‐co‐MAA‐co‐ODA)) with different monomer molar ratios was synthesized. Critical micelle concentration (CMC) of the polyelectrolyte solution was determined and the CMC increase with methacrylic acid content in the polyelectrolyte. The phase behaviors of the polyelectrolyte solution were studied, and the effects of various factors on the phase transition were discussed. The experimental results indicate that the lower critical solution temperature and the phase transition pH depend on the monomer molar ratio in the polyelectrolyte. Effect of polyelectrolyte concentration on phase transition pH was studied, and results shown that the phase‐transition pH is independent of the polyelectrolyte concentration. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011