Plasma induced graft polymerization of acrylic acid onto polypropylene monofilament

Plasma induced graft polymerization of acrylic acid onto polypropylene (PP) monofilament was carried to introduce carboxyl functionality on its surface. The monofilament was treated with oxygen plasma to create hydroperoxide groups and subsequent graft polymerization was initiated on this exposed monofilament. It was observed that in the absence of an added inhibitor, the grafting did not proceed because of the extensive homopolymerization which left behind hardly any monomer for the grafting reaction. The addition of ferrous sulfate to the grafting medium led to the homopolymer free grafting reaction. The addition of organics, such as methanol, butanone, and acetone led to complete inhibition of the homopolymerization at 60% content. However, the addition of butanone led to much lower degree of grafting than methanol and acetone. The contact angle of the monofilament showed drastic reduction by plasma treatment and by the subsequent grafting of acrylic acid. The grafting in ferrous sulfate medium showed higher contact angles as compared to the grafting in organic medium. The surface morphology was significantly influenced by the nature of the additive in the grafting medium. © 2007 Wiley Periodicals, Inc. JAppl Polym Sci, 2008     

Ce(IV)‐initiated graft polymerization of acrylic acid onto poly(ethylene terephthalate) fiber

Graft copolymerization of acrylic acid onto poly(ethylene terephthalate) (PET) fiber by a redox system using ceric (IV) initiator was studied with regard to various parameters of importance: acrylic acid concentration, ceric (IV) concentration, nitric acid concentration, reaction temperature, and reaction time. Based on the morphology of the PET fiber, it could be concluded that ceric (IV) in dilute nitric acid is a redox initiator for the surface graft copolymerization of the acrylic acid/PET system. The grafted PET fiber showed an increase in improved moisture regain to reach 900% at 39.5% graft yield. The dyeability with the basic dye and disperse dye significantly increased by 100 and 22%, respectively, as a result of the grafting onto PET fiber. Both tenacity and elongation gradually decreased by 51.2 and 28.9%, respectively, with increasing graft yield, which reduced the fiber service lifespan. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1952–1958, 2003     

Characterization of acrylic acid grafted poly(ethylene terephthalate) fabric

The preirradiation grafting of acrylic acid (AA) onto poly(ethylene terephthalate) (PET) had been found to affect the thermal and physical characteristics of fabric. The grafted fabrics with various graft levels were characterized by thermal gravimetric analysis (TGA), ATR‐FTIR spectroscopy, contact angle, differential scanning calorimetry (DSC), X‐ray diffraction (XRD), atomic force microscopy (AFM), and scanning electron microscopy (SEM). The initial decomposition temperature and T₅₀ were increased with the increase in degree of grafting. The percentage crystallinity was decreased as the degree of grafting increases. The detailed elemental analysis was done by X‐ray photoelectron spectroscopy (XPS). The atomic ratio (O_1s/C_1s) was found to increase significantly with increasing the degree of grafting and reached 0.64 at 14.5% grafting from 0.38 for virgin PET. The surface topography and morphology was strongly influenced as the degree of grafting was increased. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermal crosslinking of collagen immobilized on poly(acrylic acid) grafted poly(ethylene terephthalate) films

Graft polymerization of acrylic acid onto plasma‐treated poly(ethylene terephthalate) (PET) films was used to prepare surfaces suitable for collagen immobilization by dip‐coating. Such surfaces could be used as matrices for smooth muscle cell cultures in tissue engineering. Contact angle measurements showed that plasma‐treated and grafted PET films undergo considerable surface reorganization during storage under ambient conditions. However, after collagen immobilization the contact angle remained relatively stable. The amount of collagen initially attached to the film surface increased with increasing poly(acrylic acid) graft density, but subsequent washing in water led to significant collagen loss. This loss could nevertheless be substantially reduced by thermal crosslinking of the collagen in the range 110–130 °C. Atomic force microscopy (AFM) observations suggested that the washed crosslinked collagen has a very similar structure to that of the un‐crosslinked collagen. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1874–1880, 2002     

Characterization of acrylic acid‐grafted PP membranes prepared by plasma‐induced graft polymerization

Acrylic acid (AA)‐g‐polypropylene (PP) membranes were prepared by grafting AA on to a microporous PP membrane via plasma‐induced graft polymerization. The grafting of AA to the PP membrane was investigated using Fourier transform infrared spectroscopy (FTIR). Pore‐filling of the membranes was confirmed by field emission‐scanning electron microscopy (FESEM) and energy dispersing X‐ray (EDX). Ion exchange capacity (IEC), membrane electric resistance, transport number and water content were measured and analyzed as a function of grafting reaction time. The prepared AA‐g‐PP membranes showed moderate electrochemical properties as a cation‐exchange membrane. In particular, membranes with a degree of grafting of 155% showed good electrical properties, with an IEC of 2.77 mmol/g dry membrane, an electric resistance of 0.4 Ω cm² and a transport number of 0.96. Chronopotentiometric measurements indicated that AA‐g‐PP membranes, with a high IEC had a sufficient conducting region in the membrane. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Surface graft copolymerization of acrylic acid onto corona-treated poly(ethylene terephthalate) fabric

Acrylic acid (AA) was grafted onto the surface of poly(ethylene terephthalate) (PET) fabric after having short-time corona-discharge treatment (CDT) in an atmosphere in the presence of the initiator. The effect of N,N-dimethylformamide (DMF) pretreatment time, CDT time, graft copolymerization time and temperature, concentration of AA, and the content of initiator on graft yield of PET fabric was discussed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 1161–1164, 1999     

Graft polymerization of acrylic acid onto polypropylene monofilament by RF plasma

Plasma‐induced graft polymerization of acrylic acid onto polypropylene monofilament was carried out to introduce carboxyl groups on its surface. The monofilament was treated with oxygen plasma to create hydroperoxide groups and subsequent graft polymerization of acrylic acid on exposed filament was carried out. An increase in the plasma power led to higher graft levels. It was observed that the hydroperoxide build up on PP surface follows linear increase with the increase in the plasma treatment time only up to 180 s beyond which it slowed down significantly. The formation of oxygenated species was ascertained by X‐ray photoelectron spectroscopy, and the peroxide content was measured by the 2′‐diphenylpicrylhydrazyl (DPPH) estimation. The grafting was observed to be considerably influenced by the plasma exposure time, plasma power, reaction temperature, monomer concentration and the storage temperature. A maximum in the degree of grafting was observed at 40% monomer concentration beyond which grafting tended to decrease very fast. The grafting was also found to be maximum at 50°C followed by a sharp decrease, subsequently. The storage of the exposed filament at ?80°C led to the identical grafting all along the 16 days. However, the storage at 25°C showed significant reduction in the degree of grafting. The atomic force microscopy showed that surface morphology is transformed into a nonhomogeneous one after the plasma exposure, but tends to flatten out after the grafting process in the form of globular structures. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

UV‐radiation‐induced preirradiation graft copolymerization of methacrylic acid and acrylic acid onto jute fibre

UV‐radiation‐induced graft copolymerization of methacrylic acid and acrylic acid onto jute fibre was carried out using a preirradiation method with 1‐hydroxycyclohexyl‐phenylketone as a photoinitiator. 2‐methyl‐2‐propene 1‐sulfonic acid, sodium salt was incorporated into the grafting solution in suppressing the homopolymer/gel formation and facilitating graft copolymerization. In comparison, results showed that the type of monomer significantly influence on grafting. The results of the characterisation showed that the graft weight and the type of monomer have significant influence on the mechanical and water absorption properties in the case of grafted samples. Copyright © 2004 Society of Chemical Industry     

Radiation grafting of acrylic acid/N‐vinyl pyrrolidone binary mixture onto poly(ethylene terephthalate) fabric and growth of human mesenchymal stem cell

Radiation grafting of acrylic acid (AA)/N‐vinyl pyrrolidone (NVP) binary mixture onto poly(ethylene terephthalate) (PET) knittings was investigated by preirradiation technique. The influence of the grafting conditions, such as monomer composition, reaction temperature, and the effect of storage time with temperature after irradiation on the degree of grafting was determined. ATR‐FTIR spectroscopy analysis of the grafted knittings confirmed the existence of amide group of NVP in the knittings. The concentration of peroxides and effect of storage time on peroxide concentration were also determined by 2,2‐Diphenyl‐1‐picrylhydrazyl at different temperatures. There was an increase in surface roughness of grafted PET in comparison to virgin PET as determined by atomic force microscopy and scanning electron microscopy. The grafted knittings were subsequently immobilized with collagen Type I which was further apt for the study of growth and morphology of human mesenchymal stem cell (hMSC). The immobilization of collagen on PET knittings has provided an excellent surface for the growth of hMSCs. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Solid‐state polymerization and bulk crystallization behavior of poly(ethylene terephthalate) (PET)

The main variables involved in solid‐state polymerization of PET homopolymers, originally with molecular weight within the commercial range, were sequentially studied to determine their influence in polymerized products. These variables were precursor crystallinity, catalyst, and time and reaction temperature. An increasing molecular weight sequence was then used to study the bulk crystallization behavior with Avrami analyses. It was determined that thermal conditions at dissolution affect the prereaction morphology. This was important in the polymerization process because it was found that high crystallinity levels in precursors result in higher molecular weights. In agreement with other reports, typical catalysts used in melt polymerizations enhance postpolycondensation processes in the solid state. High reaction times and temperatures were also required to obtain high molecular weights. As the molecular weight increased, there was a decrease in nucleation density and Avrami analyses, applied to the isothermal bulk crystallization, indicating that the nucleation process changed from instantaneous to spontaneous with the increase in molecular weight. The consequences and relative importance of the observed results is discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 78–86, 2000     

低温等离子体引发丙烯酸在PET纳米纤维膜上的接枝聚合

介绍了低温等离子体引发丙烯酸（AA）表面接枝聚合对聚苯二甲酸乙二醇酯（PET）纳米纤维薄膜的改性研究。实验探索了放电时间和放电功率对薄膜润湿性的影响,在真空度60 Pa、AA气体流量3 L/min条件下,放电功率75～150 W范围内,放电时间60 s和放电功率150 W、放电时间30~60 s范围内,处理后薄膜的水接触角均为0°,结果说明了此改性PET纳米纤维膜具有超亲水性。通过扫描电镜、红外和力学性能等测试讨论了接枝处理前后薄膜的形态及性能的变化。实验结果表明气相低温等离子体接枝处理后,薄膜的断裂伸长率和断裂强度有一定的增强。低温等离子体引发AA表面接枝PET纳米纤维薄膜的方法有望成为电纺PET纤维膜表面改性的有效手段,具有积极的应用价值。     

Grafting of poly(acrylic acid) onto poly(amidoamine)-functionalized graphene oxide via surface-mediated reversible addition-fragmentation chain transfer polymerization

Graphene oxide was modified with third-generation poly(amidoamine) (PAMAM) to obtain dendrimer-grafted GO (DGO) with high content of functional groups. DGO's amine groups were conjugated with S-(thiobenzoyl)thioglycolic acid as proved by XPS and poly(acrylic acid) was grafted onto surface via RAFT polymerization (DGO@PAA). FT-IR results approved the synthesis of samples whereas TGA revealed 40.3% grafting of PAA. XRD patterns showed that with further modification, d-spacing increased. According to Raman spectra, modification resulted in more disordered structure whereas DGO@PAA showed a high value of I_D/I_G. Morphological studies were performed by SEM and TEM that showed a polymeric layer covered the surface of nanosheets.     

Graft reaction of acrylic acid onto metallocene‐based polyethylene‐octene elastomer

In this study, grafting of acrylic acid (AA) onto metallocene‐based polyethylene‐octene elastomer (POE) was investigated by using benzoyl peroxide as an initiator. Grafted product was characterized by using Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, X‐ray diffraction spectroscopy, and differential scanning calorimetry (DSC). Both the grafting percentage and the gel yield, at equilibrium, were higher for POE containing lower degree of comonomer content. In all cases, the crosslinking reaction was accompanied by the predominant graft reaction due to the competition of POE macroradical and excited AA. From the result of DSC and X‐ray characterizations, it was found that the change of crystallinity is slight when the gel is removed from POE‐g‐AA copolymers. It was also proven that the effect of gel formation on the properties of the copolymer could be neglected because of the low gel yield. So, the graft method proposed in this article can produce low gel yield copolymer. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2905–2912, 2002     

Graft polymerization of acrylic acid onto polyphenylene sulfide nonwoven initiated by low temperature plasma

Graft copolymerization of acrylic acid (AA) onto polyphenylene sulfide (PPS) nonwoven initiated by low temperature plasma was studied. The effects of various conditions on graft reaction and the grafting rate were investigated. SEM images showed that PPS nonwoven was grafted, and the graft copolymerization only occurred on the surface of PPS. It may be due to the chain transference going with the graft copolymerization. It was found that with the increasing of plasma power, treatment time, space between electrodes, monomer concentration, and temperature of graft polymerization, the grafting rate increased at first, went to the top, and then decreased. The PPS nonwoven surface graft reaction could be optimized by the following processing conditions: 120 s of plasma treatment time, 50 W of plasma power, 1.5 cm of space between electrodes, 30% (w/w) of monomer concentration, and 50°C of temperature of graft polymerization. Measurement of XPS showed that the peak of C1s of graft polyacrylic acid was existed, and the peak area increased with the increase of the grafting rate. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5884–5889, 2006     

Platelet adhesion on laser‐induced acrylic acid–grafted polyethylene terephthalate

To improve blood compatibility, acrylic acid (AAc) was grafted onto a polyethylene terephtalate (PET) film surface using lasers. The PET surface was irradiated with a CO₂ pulsed laser, and then graft copolymerization was carried out in an aqueous solution of AAc in the presence of Mohr's salt. Different techniques such as attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR), scanning electron microscopy (SEM), and contact angle measurements were used to characterize the modified PET surface. The ATR‐FTIR spectra confirmed the creation of new functional groups on the PET surface, and contact angle measurements revealed that the hydrophilicity of the PET surface increased as a result of the AAc graft polymerization. The electron micrographs showed that the grafting changed the surface morphology of the PET film. To evaluate the blood compatibility in vitro, the number of platelets adhering to the modified PET surface was determined using lactate dehydrogenase (LDH) activity measurement. The data from LDH method indicated that the extent of platelet adherence on the unmodified PET was much higher than that on the AAc grafted PET. The morphology of adhered platelets on the PET surface was investigated by SEM. The results showed that platelet adhesion and activation onto the PET surface was reduced because of AAc graft polymerization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3191–3196, 2002     

Plasma‐graft polymerization of vinyl monomer with an acid amide group onto a surface of carbon fiber and its adhesion to epoxy resin

The mechanical properties of a fiber‐reinforced plastic are influenced by the adhesion between a reinforced fiber and a matrix resin. In this work it is shown how to obtain strong adhesion between a carbon yarn and an epoxy resin through the formation of covalent bonds. Acid amide groups reactive with epoxy groups were introduced onto a surface of the yarn by means of plasma‐graft polymerization of acrylamide. The density of active radicals formed on a surface of the yarn by the plasma irradiation was first increased with increasing discharge power and plasma irradiation time, and then the rates of the increase were largely decreased. The degree of grafting was linearly increased with increasing the surface density of active radicals. The yarn embedded in diglycidyl ether of bisphenol‐A/triethylenetetramine mixture was pulled out to obtain pull‐out force after curing. Pull‐out force was increased with increasing degree of grafting and the failure in pulling out of the yarn was cohesive. The covalent bonds formed in the graft layer will result in an increment of pull‐out force. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 284–290, 2000     

Plasma‐induced,solid‐state polymerization of N‐isopropylacrylamide

The radio‐frequency plasma‐initiated polymerization of N‐isopropylacrylamide (NIPAM) in the solid state was performed. The isolated linear polymer was characterized by ¹³C‐NMR, ¹H‐NMR, and Fourier transform infrared spectroscopy, and the effects of selected operational plasma parameters (discharge power and time) on the conversion rates were studied. Reversible transitions at the volume‐phase‐transition temperatures of the swelled poly(N‐isopropylacrylamide) hydrogels were investigated by differential scanning calorimetry. The surface morphologies before and after plasma treatment were followed by scanning electron microscopy. With the obtained X‐ray diffraction results, we propose a solid‐state plasma polymerization mechanism for the NIPAM. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Grafting of polyacrylamide from poly(ethylene terephthalate) films

Poly(ethylene terephthalate) (PET) films were modified via the grafting of polyacrylamide (PAAM) onto the surface by surface‐initiated atom transfer radical polymerization and UV‐initiated grafting. The surface composition and morphology of the modified PET films were characterized by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and scanning electron microscopy (SEM). The results show that the surface of the PET film was grafted by PAAM, with its own surface morphology different from that of PET. The properties of the modified PET films were studied by contact‐angle, peeling force, penetrability, haze, and friction factor measurements. The results indicate that the peeling force and friction factor of the modified PET films were higher than those of the unmodified PET film. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Plasma treatment‐induced fluorine‐functionalized multi‐walled carbon nanotubes to modify poly(ethylene terephthalate) obtained via in situ polymerization

The introduction of carbon nanotubes in a polymer matrix can markedly improve its mechanical properties and electrical conductivity, and much effort has been devoted to achieve homogeneous dispersions of carbon nanotubes in various polymers. Our group previously performed successfully fluorine‐grafted modification on the sidewalls of multi‐walled carbon nanotubes (MWCNTs), using homemade equipment for CF₄ plasma irradiation. As a continuation of our previous work, in the present study CF₄ plasma‐treated MWCNTs (F‐MWCNTs) were used as a nanofiller with poly(ethylene terephthalate) (PET), which is a practical example of the application of such F‐MWCNTs to prepare polyester/MWCNTs nanocomposites with ideal nanoscale structure and excellent properties. As confirmed from scanning electron microscopy observations, the F‐MWCNTs could easily be homogeneously dispersed in the PET matrix during the in situ polymerization preparation process. It was found that a very low content of F‐MWCNTs dramatically altered the crystallization behavior and mechanical properties of the nanocomposites. For example, a 15 °C increase in crystallization temperature was achieved by adding only 0.01 wt% F‐MWCNTs, implying that the well‐dispersed F‐MWCNTs act as highly effective nucleating agents to initiate PET crystallization at high temperature. Meanwhile, an abnormal phenomenon was found in that the melt point of the nanocomposites is lower than that of the pure PET. The mechanism of the tailoring of the properties of PET resin by incorporation of F‐MWCNTs is discussed, based on structure–property relationships. The good dispersion of the F‐MWCNTs and strong interfacial interaction between matrix and nanofiller are responsible for the improvement in mechanical properties and high nucleating efficiency. The abnormal melting behavior is attributed to the recrystallization transition of PET occurring at the early stage of crystal melting being retarded on incorporation of F‐MWCNTs. Copyright © 2009 Society of Chemical Industry     

Simultaneous graft copolymerization of 2‐hydroxyethyl methacrylate and acrylic acid onto polydimethylsiloxane surfaces using a two‐step plasma treatment

Acrylic acid (AAc) and 2‐hydroxyethyl methacrylate (HEMA) mixtures were simultaneously grafted onto the surfaces of polydimethylsiloxane (PDMS) films using a two‐step oxygen plasma treatment (TSPT). The first step of this method includes: oxygen plasma pretreatment of the PDMS films, immersion in HEMA/AAc mixtures, removal from the mixtures, and drying. The second step was carried out by plasma copolymerization of preadsorbed reactive monomers on the surfaces of dried pretreated films. The effects of pretreatment and polymerization time length, monomer concentration, and ratio on peroxide formation and graft amount were studied. The films were characterized by attenuated total reflection Furrier transformer infrared (ATR‐FTIR) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), zeta potential, surface tension, and water contact angle measurements. The ATR‐FTIR spectrum of the modified film after alkaline treatment showed the two new characteristic bands of PHEMA and PAAc. Both increase the polar part of surface tension (γ_p) after grafting and the evaluation of surface charge at pH 1.8, 7, and 12 confirmed the presence of polar groups on the surface of grafted films with a mixture of HEMA/AAc. Morphological studies using both AFM and SEM evaluation illustrated various amounts of grafted copolymer on the surface of PDMS films. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007