Utilization of peanut shells as adsorbents for selected metals

Peanut shells of mesh size 10–20 were modified by combinations of treatments following a 3² factorial design. Treatments consisted of either no wash, water wash or base wash followed by no modification or modification with 0.6 M citric acid or 0.6 M phosphoric acid. The nine samples were evaluated for their uptake of five metal ions (Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II)) from solution. The results were compared with metal ion adsorption by three commercial cation exchange resins, namely, Amberlite® 200, Amberlite® IRC 718 and Duolite® GT‐73. The percent of metal ions adsorbed per gram of adsorbent was significantly increased by each of the acid treatments, average values ranged from 19 to 34% compared with non‐acid treated samples at 5.7%. The percent of metal ions adsorbed for base‐washed samples were higher than water‐washed or unwashed shells. Interaction between wash and acid treatment was not significant for most of the experimental conditions used. Acid‐treated samples were as effective as Duolite® GT‐73 in the adsorption of Cd(II) and almost twice as effective in the adsorption of Zn(II) from solutions containing a single metal ion. In solutions containing multiple metal ions, citric acid samples were found to be most effective and selective for Cu(II) compared with Cd(II), Ni(II), and Zn(II). In general, phosphoric acid‐modified shells removed the most metals from solution for the experimental samples and were more effective in removing Cd(II) and Zn(II) than two of the three commercial resins. Acid‐modified peanut shells are promising as metal ion adsorbents. © 1999 Society of Chemical Industry     

Sorption properties of the iminodiacetate ion exchange resin,amberlite IRC‐718, toward divalent metal ions

The sorption properties of the commercially available cationic exchange resin, Amberlite IRC‐718, that has the iminodiacetic acid functionality, toward the divalent metal‐ions, Fe²⁺, Cu²⁺, Zn²⁺, and Ni²⁺ were investigated by a batch equilibration technique at 25°C as a function of contact time, metal ion concentration, mass of resin used, and pH. Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Fe²⁺ and that the metal‐ion uptake follows the order: Fe²⁺ > Cu²⁺> Zn²⁺ >Ni²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of adsorbed metal ions and buffer nature on IgG separation from human plasma by column chromatography using an ion exchange resin,Amberlite IRC‐718

Fractionation of human plasma on ion exchanger resin was performed on Amberlite IRC‐718 saturated with metal ions. Depletion of human immunoglobulin G was carried out by column chromatography using Tris‐HCl, pH 7 at different concentrations. Results showed that, when Cu⁺² and Ni⁺² were adsorbed on the resin, one or two fractions of purified IgG were obtained, respectively. Whereas Fe⁺² and Zn⁺², both retain IgG and serum albumin or serum albumin alone. Furthermore, the Ni⁺²‐resin retention of serum proteins is too strong that the use of 700 mMTris‐HCl cannot liberate any other proteins than nonadsorbed serum albumin. In conclusion, this investigation demonstrates that immobilized metal ion affinity chromatography with Cu²⁺, Ni²⁺, and Fe²⁺ immobilized on Amberlite IRC‐718 has the potential to be developed as part of a process to purify IgG out of untreated human plasma as acceptable adsorption and elution levels of IgG could be achieved. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Removal of Cd2+, Cu2+, Ni2+, and Pb2+ ions from aqueous solutions using tururi fibers as an adsorbent

This work investigates the removal of Cd²⁺, Cu²⁺, Ni²⁺, and Pb²⁺ ions from aqueous solutions using tururi fibers as an adsorbent under both batchwise and fixed‐bed conditions. It was found that modification of the tururi fibers with sodium hydroxide increased the adsorption efficiencies of all metal ions studied. The fractional factorial design showed that pH, adsorbent mass, agitation rate, and initial metal concentration influenced each metal adsorption differently. The kinetics showed that multi‐element adsorption equilibria were reached after 15 min following pseudo‐second‐order kinetics. The Langmuir, Freundlich, and Redlich–Peterson models were used to evaluate the adsorption capacities by tururi fibers. The Langmuir model was found to be suitable for all metal ions. Breakthrough curves revealed that saturation of the bed was reached in 160.0 mL with Cd²⁺ and Cu²⁺, and 52.0 mL with Ni²⁺ and Pb²⁺. The Thomas model was applied to the experimental data of breakthrough curves and represented the data well. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40883.     

Microwave preparation and adsorption properties of EDTA‐modified cross‐linked chitosan

A novel chitosan‐based adsorbent (CCTE) was synthesized by the reaction between epichlorohydrin O‐cross‐linked chitosan and EDTA dianhydride under microwave irradiation (MW). The chemical structure of this new polymer was characterized by infrared spectra analysis, thermogravimetric analysis, and X‐ray diffraction analysis. The results were in agreement with the expectations. The static adsorption properties of the polymer for Pb²⁺, Cu²⁺, Cd²⁺, Ni²⁺, and Co²⁺ were investigated. Experimental results demonstrated that the CCTE had higher adsorption capacity for the same metal ion than the parent chitosan and cross‐linked chitosan. In particular, the adsorption capacities for Pb²⁺ and Cd²⁺ were 1.28 mmol/g and 1.29 mmol/g, respectively, in contrast to only 0.372 mmol/g for Pb²⁺ and 0.503 mmol/g for Cd²⁺ on chitosan. Kinetic experiments indicated that the adsorption of CCTE for the above metal ions achieved the equilibrium within 4 h. The desorption efficiencies of the metal ions on CCTE were over 93%. Therefore, CCTE is an effective adsorbent for the removal and recovery of heavy metal ions from industrial waste solutions. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,characterization, and bactericidal properties of composites based on crosslinked resins containing silver

Two different commercial crosslinked resins (Amberlite GT73 and Amberlite IRC748) were employed for anchoring silver. The ? SH and ? N(CH₂COOH)₂ groups, respectively, present on these resins were used for Ag⁺ chelation from an aqueous solution. The Ag⁺ ions were reduced with three different reductants: hydrazine, hydroxylamine, and formaldehyde (under an alkaline pH). The produced composites were characterized with thermogravimetry/differential thermogravimetry and scanning electron microscopy combined with a backscattered scanning electron detector. Energy‐dispersive X‐ray spectroscopy coupled to scanning electron microscopy allowed the observation of submicrometer particles of silver, and chemical microanalysis of emitted X‐rays revealed the presence of metal on the internal and external surfaces of the composite microspheres. The amount of incorporated silver was determined by titration. The antibacterial activity of the silver/resin composites was determined toward 10³–10⁷ cells/mL dilutions of the auxotrophic AB1157 Escherichia coli strain; the networks containing anchored submicrometer silver particles were completely bactericidal within a few minutes because of the combined action of silver and functional groups of the resins. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Removal of metal ions from aqueous solution by adsorption onto activated carbon cloths: adsorption competition with organic matter

Activated carbon cloths are recent adsorbents whose adsorption properties are well known for monocomponent solutions of organics or metal ions. However, to treat wastewaters with these materials, their performance has to be determined in multicomponent solution. This work studies adsorption competition between metal ions (Cu²⁺, Pb²⁺) and organic matter (benzoic acid). The first part investigates adsorption equilibrium of monocomponent metal ions solutions and shows the dependence of adsorption capacities on adsorbent porosity and metal ions chemical properties (molecular weight, ionic radius and electronegativity). The influence of pH is also demonstrated. The second part focuses on adsorption competition: (1) between both metal ions (a decrease of adsorption capacities is observed, whose value is related to adsorption kinetics of metal ions); (2) between metal ions and organic matter, in solution or adsorbed onto the activated carbon cloth (a strong influence of pH is shown: when benzoic acid is under benzoate form, in both cases adsorption is increased due to the formation of ligands between adsorbed benzoate ions and metals).     

Metal recovery by aged beads prepared using cell-suspension from the waste of beer fermentation broth

Lead, copper, and cadmium were adsorbed onto aged calcium alginate beads containing cell-suspension from the waste of beer fermentation broth. Beads prepared by adding 0.6% (w/v) sodium alginate into the cell suspension from the waste of beer fermentation broth and making the cell suspension drop into the 1% (w/v) calcium alginate solution were stored in the 1% (w/v) calcium chloride solution for 1 year. The specific metal uptake of the aged cell-suspension immobilized bead was 312 mg Pb²⁺, 158 mg Cu²⁺, and 112 mg Cd²⁺/g bead dry weight at pH 7.5 of the metal solution, respectively. The relation between the specific metal uptake by the aged cell-suspension immobilized beads and the equilibrium metal concentration was nonlinearly regressed and well described by the Freundlich isotherm. The specific cadmium uptake capacity of aged cell-suspension immobilized beads was between the specific cadmium uptake capacities of commercial beads Duolite GT-73 and Amberite IRA-400 and higher than those of the fresh Saccharomyces cerevisiae ATCC 834 and Saccharomyces cerevisiae ATCC 24858 immobilized beads.     

Electron Beam Grafted Polymer Adsorbent for Removal of Heavy Metal Ion from Aqueous Solution

Abstract

An electron beam grafted adsorbent was synthesized by post irradiation grafting of acrylonitrile (AN) on to a non‐woven thermally bonded polypropylene (PP) sheet using 2 MeV electron beam accelerator. The grafted poly(acrylonitrile) chains were chemically modified to convert a nitrile group to an amidoxime (AMO) group, a chelating group responsible for metal ion uptake from an aqueous solution. The effect of various experimental variables viz. dose, dose rate, temperature, and solvent composition on the grafting extent was investigated. PP grafted with the amidoxime group (AMO‐g‐PP) was tested for its suitability as an adsorbent for removal of heavy metal ions such as Co²⁺, Ni²⁺, Mn²⁺, and Cd²⁺ from aqueous solution. Langmuir and Freundlich adsorption models were used to investigate the type of adsorption of these ions. The adsorption capacities of the adsorbent for the metal ions were found to follow the order Cd²⁺>Co²⁺>Ni²⁺>Mn²⁺. The kinetics of adsorption of these ions indicated that the rate of adsorption of Cd²⁺ was faster than that of other ions studied.     

Thiourea modified hyper‐crosslinked polystyrene resin for heavy metal ions removal from aqueous solutions

A hyper‐crosslinked resin chemically modified with thiourea (TM‐HPS) was synthesized, characterized, and evaluated for the removal of heavy metal ions (Pb²⁺, Cd²⁺, and Cu²⁺) from aqueous solutions. The structural characterization results showed that a few thiourea groups were grafted on the surface of the resin with a big BET surface area and a large number of narrow micropores. Various experimental conditions such as pH, contact time, temperature, and initial metal concentration of the three heavy metal ions onto TM‐HPS were investigated systematically. The results indicated that the prepared resin was effective for the removal of the heavy metal ions from aqueous solutions. The isotherm data could be better fitted by Langmuir model, yielding maximum adsorption capacities of 689.65, 432.90, and 290.69 mg/g for Pd²⁺, Cd²⁺, and Cu²⁺, respectively. And the adsorption kinetics of the three metal ions followed the pseudo‐second‐order equation. FTIR and XPS analysis of TM‐HPS before and after adsorption further revealed that the adsorption mechanism could be a synergistic effect between functional groups and metal ions and electrostatic attraction, which may provide a new insight into the design of highly effective adsorbents and their potential technological applications for the removal of heavy metal ions from aqueous solutions. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45568.     

Dithiocarbamate functionalized Al(OH)3‐polyacrylamide adsorbent for rapid and efficient removal of Cu(II) and Pb(II)

Heavy metal ions such as Cu²⁺ and Pb²⁺ impose a significant risk to the environment and human health due to their high toxicity and non‐degradable characteristics. Herein, Al(OH)₃‐polyacrylamide chemically modified with dithiocarbamates (Al‐PAM‐DTCs) was synthesized using formaldehyde, diethylenetriamine, carbon disulfide, and sodium hydroxide for rapid and efficient removal of Cu²⁺ and Pb²⁺. The synthesized adsorbent was characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis, scanning electron microscopy–energy dispersive X‐ray spectroscopy analysis, and transmission electron microscope measurements. Al‐PAM‐DTCs showed rapid removal of Cu²⁺ (<30 min) and Pb²⁺ (<15 min) with high adsorption capacities of 416.959 mg/g and 892.505 mg/g for Cu²⁺ and Pb²⁺ respectively. Al‐PAM‐DTCs also had high capacities in removing suspended solids and metal ions simultaneously in turbid bauxite suspensions. FTIR, thermodynamic study, and elemental mapping were used to determine the adsorption mechanism. The rapid, convenient, and effective adsorption of Cu²⁺ and Pb²⁺ indicated that Al‐PAM‐DTCs has great potential for practical applications in purification of other heavy metal ions from aquatic systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45431.     

Stability constants of amidoximated chitosan‐g‐poly(acrylonitrile) copolymer for heavy metal ions

Amidoximated chitosan‐g‐poly(acrylonitrile) (PAN) copolymer was prepared by a reaction between hydroxylamine and cyano group in chitosan‐g‐PAN copolymer prepared by grafting PAN onto crosslinked chitosan with epychlorohydrine. The adsorption and desorption capacities for heavy metal ions were measured under various conditions. The adsorption capacity of amidoximated chitosan‐g‐PAN copolymer increased with increasing pH values, and was increased for Cu²⁺ and Pb²⁺ but a little decreased for Zn²⁺ and Cd²⁺ with increasing PAN grafting percentage in amidoximated chitosan‐g‐PAN copolymer. In addition, desorption capacity for all metal ions was increased with increasing pH values in contrast to the adsorption results. Stability constants of amidoximated chitosan‐g‐PAN copolymer were higher for Cu²⁺ and Pb²⁺ but lower for Zn²⁺ and Cd²⁺ than those of crosslinked chitosan. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 469–476, 1999     

Removal of phosphate ions with a chemically modified chitosan/metal‐ion complex

The adsorption of metal ions (Mo⁶⁺, Cu²⁺, Fe²⁺, and Fe³⁺) was examined on chemically modified chitosans with a higher fatty acid glycidyl (CGCs), and the adsorption of Cu²⁺ was examined on ethylenediamine tetraacetic acid dianhydride modified CGCs (EDTA‐CGCs) synthesized by the reaction of the CGCs with ethylenediamine tetraacetic acid dianhydride. The adsorption of phosphate ions onto the resulting substrate/metal‐ion complex was measured. Mo⁶⁺ depicted remarkable adsorption toward the CGCs, although all the Mo⁶⁺ was desorbed under the adsorption conditions of the phosphate ions. The other metal ions were adsorbed to some extent on CGCs by chelating to the amino group in the substrate, except for CGC‐1, which had the highest degree of substitution (83.9%). Considerable amounts of Fe²⁺ were adsorbed onto CGCs; however, only a limited number of phosphate ions was adsorbed onto the substrate/metal‐ion complex. As a result, the following adsorbent/metal‐ion complexes gave higher adsorption ability toward phosphate ions: CGC‐4/Cu²⁺, CGC‐4/Fe³⁺, and EDTA‐CGC‐3/Fe³⁺. Where, CGC‐3 is a chemically modified chitosan with the degree of substitution of 26.5 percentage, and CGC‐4 is one with the degree of substitution of 16.0 percentage. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Selective removal of copper ions from multi‐component aqueous solutions using modified silica impregnated with LIX 84

A silica support impregnated with 2‐hydroxy‐5‐nonylacetophenone oxime (LIX 84) was prepared after surface modification by ‐aminopropyltriethoxysilane. Fixed‐bed tests were conducted to investigate the capabilities of the prepared adsorbent with respect to the selective removal of copper ions from multi‐metal solutions. Break‐through curves were obtained using the modified silica for a solution containing Cu²⁺, Cd²⁺, Ni²⁺, Co²⁺ and Zn²⁺, as well as an industrial electronics wastewater sample. The copper adsorption capacities for the multi‐metal solution and the wastewater were 0.175 and 0.198 mmolg⁻¹, respectively under the conditions used in this study. The copper recovery ratios for the modified silica treated with the multi‐metal solution and the wastewater were 86 and 91%, respectively after treating with 0.1 moldm⁻³ HNO₃. The results show that the modified silica, prepared here, has potential value for the selective removal of copper ions from multi‐component aqueous solutions containing multi‐metals using a fixed‐bed reactor. © 2000 Society of Chemical Industry     

Welan Gum-Modified Cellulose Bead as an Effective Adsorbent of Heavy Metal Ions (Pb2+, Cu2+, and Cd2+) in Aqueous Solution

A novel welan gum-modified cellulose adsorbent was prepared through emulsification, regeneration, and modification. SEM and FTIR were used to characterize the modified cellulose adsorbent. The adsorption isotherms of metal ions on the adsorbent were well fitted by Langmuir model, with the maximum adsorption capacities of 83.6, 77.0, and 67.4 mg/g for Cd²⁺, Pb²⁺, and Cu²⁺, respectively. The adsorption kinetics was well described using the pseudo-first-order model. Moreover, the adsorption capacities for the three metal ions increased with the increase of temperature, and the optimal pH was 5. Furthermore, the thermodynamic analysis indicated that the adsorption processes were spontaneous and endothermic.     

Carbon-encapsulated magnetic nanoparticles as separable and mobile sorbents of heavy metal ions from aqueous solutions

Carbon-encapsulated magnetic nanoparticles (CEMNPs) are studied as mobile sorbents for removal of heavy metal ions (Cu²⁺, Co²⁺, Cd²⁺) from aqueous solutions. The ion uptakes achieve 95% for cadmium and copper. CEMNPs-based sorbents also have excellent adsorption capacities (between 1.23 and 3.21 mg/g), which are considerably higher than the capacities of activated carbons (between 0.37 and 0.39 mg/g).     

Preparation and adsorption properties of poly(N‐vinylformamide/acrylonitrile) chelating fiber for heavy metal ions

In this article we report a new chelating fiber that was prepared from a hydrolyzate of poly(N‐vinylformamide/acrylonitrile) by a wet‐spinning method. This fiber contains chelating groups, such as amidine groups, amino groups, cyano groups, and amide groups, with high densities. We examined the chelating abilities for several metal ions with this fiber, and present the morphological merit of the fibrous product compared with the globular resin. Based on the research results, it is shown that the fiber has higher binding capacities and better adsorption properties for heavy metal ions than the resin. The pH value of the metal ion solution shows strong influences on the adsorption of the metal ions. The maximum adsorption capacities of the fiber for Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, and Mn²⁺ are 112.23, 88.11, 141.04, 108.06, and 73.51 mg/g, respectively. In mixed metal ions solution, the fiber adsorbs Cr³⁺, Cu²⁺ and Co²⁺ efficiently. The adsorbed metal ions can be quantitatively eluted by hydrochloric acid. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1378–1386, 2002     

Formation of thermosensitive copolymer beads having phosphinic acid groups and adsorption ability for metal ions

Hydrophilic thermosensitive copolymer beads having phosphinic acid groups were prepared by suspension copolymerization of acryloyloxypropyl n‐octylphosphinic acid (APPO), N‐isopropyl acrylamide (NIPAAm), and tetraethyleneglycol dimethacrylate (4G). The thermosensitivity and the adsorption ability of the copolymer beads for metal ions beads were studied. The APPO‐NIPAAm‐4G copolymer beads were obtained in a good yield by suspension copolymerization of monomers (APPO, NIPAAm, and 4G) dissolved in chloroform, in a saturated Na₂SO₄ aqueous solution in the presence of surfactant and MgCO₃. The APPO‐NIPAAm‐4G copolymer beads had higher adsorption ability for lanthanide metal ions (Eu³⁺, Sm³⁺, Nd³⁺, or La³⁺) than for main transition metal ions (Cu²⁺, Ni²⁺, or Co²⁺). Furthermore, it was also found that the APPO‐NIPAAm‐4G copolymer beads had selective adsorption ability between lanthanide metal ions, and the order of adsorption ability for lanthanide metal ions was as follows: Eu³⁺ > Sm³⁺ > Nd³⁺ > La³⁺. The selective adsorption for these metal ions from their mixed solutions was performed by both a batch method and a column method. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 449–460, 2006     

Alanine containing porous beads for mercury removal from artificial solutions

N‐methacryloyl‐(L )‐alanine (MALA) was synthesized by using methacryloyl chloride and alanine as a metal‐complexing ligand or comonomer. Spherical beads with an average diameter of 150–200 μm were obtained by suspension polymerization of MALA and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. Poly(HEMA–MALA) beads were characterized by SEM, swelling studies, surface area measurement, and elemental analysis. Poly(HEMA–MALA) beads have a specific surface area of 68.5 m²/g. Poly(HEMA–MALA) beads with a swelling ratio of 63%, and containing 247 μmol MALA/g were used in the removal of Hg²⁺ from aqueous solutions. Adsorption equilibrium was achieved in about 60 min. The adsorption of Hg²⁺ ions onto PHEMA beads was negligible (0.3 mg/g). The MALA incorporation into the polymer structure significantly increased the mercury adsorption capacity (168 mg/g). Adsorption capacity of MALA containing beads increased significantly with pH. The adsorption of Hg²⁺ ions increased with increasing pH and reached a plateau value at around pH 5.0. Competitive heavy metal adsorption from aqueous solutions containing Cd²⁺, Cu²⁺, Pb²⁺, and Hg²⁺ was also investigated. The adsorption capacities are 44.5 mg/g for Hg²⁺, 6.4 mg/g for Cd²⁺, 2.9 mg/g for Pb²⁺, and 2.0 mg/g for Cu²⁺ ions. These results may be considered as an indication of higher specificity of the poly(HEMA–MALA) beads for the Hg²⁺ comparing to other ions. Consecutive adsorption and elution operations showed the feasibility of repeated use for poly(HEMA–MALA) chelating beads. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1222–1228, 2006     

Preparation of Chelating Resins Containing a Pair of Neighboring Carboxylic Acid Groups and the Adsorption Characteristics for Heavy Metal Ions

Abstract

For the functional enhancement of chelating resins containing carboxylic acids, copolymer beads were prepared by suspension polymerization of styrene (St), methyl methacrylate (MMA), and divinylbenzene (DVB) in the presence of toluene as diluent. The phenyl rings of the beads were directly chloromethylated, and the carboxylic ester groups of the beads were converted into hydroxymethyl groups by reduction followed by chlorination to give chloromethyl groups, respectively. The chelating resins containing a pair of neighboring carboxylic acid groups (NCAGs) were obtained by the alkylation of chloromethyl groups in copolymer beads with diethyl malonate in the presence of sodium hydride followed by hydrolysis using aqueous alkali solution. Accordingly, the structural effects of the resins on the adsorption of heavy metal ions were investigated. Poly(St‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, and Cu²⁺, whereas poly(MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Cu²⁺, Cd²⁺, and Co²⁺. On the other hand, poly(St‐co‐MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, Co²⁺, and Cu²⁺: a synergistic effect on the adsorption of heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, and Co²⁺ was observed. The adsorption ability of poly(St‐co‐MMA‐co‐DVB)‐based chelating resin among three kinds of chelating resins was relatively good.