壳聚糖接枝聚丙烯酸钠/高岭土复合树脂的吸水性能

利用溶液聚合法制备了壳聚糖接枝聚丙烯酸钠/高岭土复合树脂,研究了复合树脂在蒸馏水中的吸水速率、重复吸水性能和人工尿液中的吸水倍率,以及在不同温度、不同电解质溶液离子强度和不同pH值的环境下复合树脂的吸水性能。结果表明,复合树脂的吸水速率较慢,在多次重复吸水后吸水性能也逐渐降低,在人工尿液中的吸水倍率高于聚丙烯酸钠树脂,低于壳聚糖接枝丙烯酸钠树脂;随着温度的升高,复合树脂的吸水能力增强,超过50℃后变化较小;树脂的吸液倍率随着电解质溶液浓度和价态的增大而下降;随着pH值的增大而出现驼峰,在pH=3.5和pH=8.5处分别出现吸液倍率最大值。     

Synthesis and properties of a poly(acrylic acid)/montmorillonite superabsorbent nanocomposite

A novel superabsorbent nanocomposite was synthesized through the intercalation polymerization of partially neutralized acrylic acid and a sodium‐type montmorillonite powder with N,N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate and sodium sulfite as a type of mixed redox initiator. The effects of such factors as the amounts of the sodium‐type montmorillonite, crosslinker, and initiator and neutralization degree on the water absorbency of the nanocomposite were investigated. The structure and micrographs of the superabsorbent were characterized with Fourier transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscopy. The results showed that the acrylic acid monomer was successfully intercalated into the montmorillonite layers and banded together with them. The montmorillonite layers were exfoliated and basically dispersed in the composite on a nanoscale after the polymerization. The water absorbency of the nanocomposite was much higher than that of pure poly(acrylic acid). The optimum absorbency of the nanocomposite in distilled water and saline water (NaCl concentration = 0.9%) was 1201 and 83 g/g, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5725–5730, 2006     

Synthesis of poly(acrylic acid)/sodium humate superabsorbent composite for agricultural use

A novel poly (acrylic acid)/sodium humate superabsorbent composite was synthesized by graft copolymerization reaction of acrylic acid (AA) on sodium humate micropowder using N,N′‐methylenebisacrylamide (MBA) as a crosslinker and potassium peroxydisulfate (KPS) as an initiator in aqueous solution. The effects on water absorbency of factors such as reaction temperature, initial monomer concentration, and degree of neutralization of AA, amount of crosslinker, initiator, and sodium humate were investigated. The superabsorbent composite was characterized by scanning electron microscopy, and the graft copolymerization reaction of AA on sodium humate micropowder was characterized by IR spectroscopy. Results obtained from this study show that the water absorbency of the superabsorbent composite synthesized under optimal conditions for synthesis with a sodium humate content of 5.3% exhibited absorption of 684 g H₂O/g sample in distilled water. Water‐retention in soil is enhanced by the use of the superabsorbent composite. The effect of superabsorbent composite on the growth of corn is reported. The superabsorbent composite may be of use as water management materials for agriculture purposes in desert and drought‐prone areas. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5137–5143, 2006     

Preparation and water absorbency of a novel poly(acrylate‐co‐acrylamide)/vermiculite superabsorbent composite

A novel poly(acrylate‐co‐acrylamide)/expanded vermiculite (EVMT) superabsorbent composite was synthesized by aqueous solution polymerization method. The water absorbency of the superabsorbent composite still reaches 850 g/g when 50 wt % EVMT is added, which is significant in decreasing the production cost of the superabsorbent composites. By controlling the molar ratio of acrylic acid monomer and acrylamide monomer, and neutralization degree of acrylic acid, the hydrophilic groups on the composite can be adjusted, and it is found that the collaborative absorbent effect of ? CONH₂, ? COOK, and ? COOH groups is superior to that of single ? CONH₂, ? COOK, or ? COOH group. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 735–739, 2007     

Studies on poly(acrylic acid)/attapulgite superabsorbent composite. I. Synthesis and characterization

A novel poly(acrylic acid)/attapulgite superabsorbent composite was synthesized by graft copolymerization reaction of acrylic acid (AA) on attapulgite micropowder using N,N′‐methylenebisacrylamide (MBA) as a crosslinker and ammonium persulfate (APS) as an initiator in aqueous solution. The effects on water absorbency of such factors as reaction temperature, initial monomer concentration, degree of neutralization of AA, amount of crosslinker, initiator, and attapulgite were investigated. These crosslinked superabsorbent composites were characterized by thermogravimetetric analysis and scanning electron microscopy. The graft copolymerization reaction of AA on attapulgite micropowder was characterized by FTIR. The water absorbencies for these superabsorbent composites in water and saline solutions were investigated and water‐retention tests were carried out. Results obtained from this study show that the water absorbency of the superabsorbent composite synthesized under optimal synthesis conditions with an attapulgite content of 10% exhibited an absorption of 1017 g H₂O/g sample and 77 g H₂O/g sample in distilled water and in 0.9 wt % NaCl solution, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1596–1603, 2004     

Poly(acrylic acid)–poly(vinyl alcohol) copolymers with superabsorbent properties

Biodegradable polyacrylates were produced by a series of novel copolymerization and/or crosslinking techniques using poly(vinyl alcohol) (PVA) moieties modified by the incorporation of olefinic structures. PVA was modified by a tosylation and/or detosylation reaction. The functionalized PVA was copolymerized and/or crosslinked with acrylic acid or its partially neutralized form to give crosslinked polyacrylates that could swell in water. Their swelling behavior was determined under load. Degradation studies were performed in α-chymotrypsin, trypsin, and papain solutions. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 817–829, 1998     

Waste polystyrene foam‐graft‐acrylic acid/montmorillonite superabsorbent nanocomposite

A novel superabsorbent nanocomposite based on partially neutralized acrylic acid, waste polystyrene foam, and sodium type montmorillonite (Na‐MMT) powder was synthesized through emulsion polymerization using N, N′‐methylenebisacrylamide as a crosslinker, 2,2′‐azo‐bisiso‐butyronitrile, ammonium persulfate, and sodium sulfite as mixed redox initiators. The effects of such factors as amount of Na‐MMT, crosslinker, initiator, and neutralization degree on water absorbency of the superabsorbent were investigated. The composites were characterized by Fourier transform infrared spectroscope, X‐ray diffraction, thermo gravimetric analysis, and scanning electron microscope. The results show that acrylic acid monomer successfully grafted onto the polystyrene chain, the layers of Na‐MMT were exfoliated and dispersed in the composite at nano size after copolymerization. The introduction of waste polystyrene foam in the composite increased the water absorbency rate. The addition of Na‐MMT not only enhanced the thermal stability of the composites but also increased its water absorbency, and the optimal water absorbencies of distilled water and saline water (w_NaCl = 0.9%) of the nanocomposites were more than 1180 g H₂O/g and 72.6 g H₂O/g, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2341–2349, 2007     

聚丙烯酸/丙烯酰胺高吸水性树脂吸附性能

用反相悬浮聚合法合成了聚丙烯酸/丙烯酰胺高吸水性树脂(PAAAM),讨论了其吸附CuCl₂、NiCl₂、CoCl₂溶液中金属离子的性能,考察了溶液pH值和初始浓度对金属离子吸附的影响。结果表明,PAAAM在不同pH值及浓度区间,对金属离子的吸附能力有较大差异,可被用于Cu(II)、Ni(II)、Co(II)的分离。同时还探讨了PAAAM在混合金属离子溶液中的吸附性能及反复利用的可能性,发现在混合溶液中PAAAM表现出对Cu（II）有较好的选择性吸附能力;4次循环后对Cu(II)、Ni(II)、Co(II) 离子的吸附量为最大吸附量的80%以上,重复使用效果理想。     

腐殖酸-聚丙烯酸表面交联吸水性树脂的合成与性能

将交联剂N,N′-亚甲基双丙烯酰胺溶于甲醇溶液制成表面处理液,通过表面交联反应将磺化腐殖酸（HA）与聚丙烯酸(PAA)结合,制得一种适合于农林领域应用的腐殖酸-聚丙烯酸高吸水性树脂（HA-PAA）.研究了表面处理液浓度、交联剂用量和腐殖酸量对HA-PAA吸水性能的影响规律和吸水机理,以及产物在沙土中的保水性能,并通过扫描电镜分析了HA-PAA的表面结构.研究结果表明,当含有10% HA时,HA-PAA耐电解质性能良好,吸水性能最佳;当沙土中添加0.2%的HA-PAA时,可明显改善沙土的贮水、保水性能.HA-PAA作为农林领域用保水剂,可发挥抗旱保墒和促进植物生长的双重作用.     

Superabsorbent polymeric materials. XII. Effect of montmorillonite on water absorbency for poly(sodium acrylate) and montmorillonite nanocomposite superabsorbents

A series of novel xerogels based on sodium acrylate (NaA), montmorillonite (MMT), and N,N′‐methylene‐bisacrylamide (NMBA) were prepared by inverse suspension polymerization and water solution polymerization. The influences of pure MMT, intercalated MMT, the method of polymerization, and the content of the MMT in the copolymeric gels on the water absorbency and the initial absorption rate in deionized water and various salt solutions were investigated. Results showed that the water absorbency was increased by adding a small amount of the pure MMT into the copolymeric gels, but decreased by adding intercalated MMT into the gels. In addition, the water absorbency of the gels prepared by water solution polymerization was lower than that prepared by inverse suspension polymerization. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3422–3429, 2004     

A study of blending and complexation of poly(acrylic acid)/poly(vinyl pyrrolidone)

Poly(acrylic acid) (PAA) and poly(vinyl pyrrolidone) (PVP) were chosen to prepare polymer complex and blends. The complex was prepared from ethanol solution and the blends were prepared from 1-methyl-2-pyrrolidone solution. DSC results show that the T_gs of the PAA/PVP blends lie between those of the two constituent polymers, whereas T_g of the PAA/PVP complex is higher than both blends and the two constituent polymers. TGA results show that degradation temperature, T_d, of PAA increases upon adding PVP in the blend, but thermal stability of the complex is higher than that of the blends as reflected by the higher T_d. Both FTIR and high-resolution solid state NMR show strong hydrogen bonding between PAA and PVP by showing significant chemical shift. The T_1ρ(H) measurement shows that the homogeneity scale for the blend is at ∼20 Å and that for the complex is ∼15 Å.     

聚丙烯酰胺/蒙脱土复合材料热学性质的研究

高吸水性聚丙烯酰胺／蒙脱土复合材料热稳定性实验证明其具有较好的热稳定性。使用自制装置对其热学性质进行研究的结果显示了,该材料可以提高流体的保温性能,延长保温时间,具有较好的应用前景。     

Preparation of poly(acrylic acid)/poly(vinyl alcohol) membrane for the facilitated transport of CO2

Poly(acrylic acid) (PAA)/poly(vinyl alcohol) (PVA) membrane was prepared for the facilitated transport of CO₂. The carrier of CO₂ was monoprotonated ethylenediamine and was introduced in the membrane by ion exchange. The ion‐exchange capacity of the membrane was 4.5 meq/g, which was much higher than that of the Nafion 117 membrane. The membrane was highly swollen by the aqueous solution. Much higher selectivity of CO₂ over N₂ and higher CO₂ permeability were obtained in the PAA/PVA membrane than in the Nafion membrane because of the higher ion‐exchange capacity and solvent content. The highest selectivity was more than 1900 when the CO₂ partial pressure in the feed gas was 0.061 atm. Effects of ion‐exchange capacity, membrane thickness, and annealing temperature in conditions of membrane preparation on membrane performance were investigated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 936–942, 2001     

Thermal behavior of poly(acrylic acid)–poly(vinyl pyrrolidone) and poly(acrylic acid)–metal–poly(vinyl pyrrolidone) complexes

Thermal analysis (TGA and DTA) of samples of PAA, PVP, PAA–PVP complexes, containing different weight fractions of PAA and ternary polymer–metal–polymer complexes, were studied. The activation energy parameters for the thermal degradation were also calculated. The study of the effect of FeCl₃, NiCl₂, and Ni(NO₃)₂ on the TGA and DTA curves of the complexes showed that the decompositions are dependent on the concentrations and the nature of the metal ions. The DTA traces of PAA–PVP complex containing FeCl₃, NiCl₂, and Ni(NO₃)₂ showed that the treatment of the complex with these metal ions causes considerable changes in the thermal decomposition of PAA–PVP complex. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4049–4057, 2006     

Drug release behavior of electrical responsive poly(vinyl alcohol)/poly(acrylic acid) IPN hydrogels under an electric stimulus

The electrically modulated properties of interpenetrating polymer networks (IPN) composed of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAAc) under electric field were investigated for drug delivery systems. PVA/PAAc IPNs with various compositions were synthesized by a sequential method, that is, ultraviolet polymerization of AAc in the mixture of PVA and aqueous AAc monomer solution, followed by a freeze‐thawing process to prepare elastic hydrogels. The amount of loaded drug significantly increased with the content of PAAc containing ionizable groups in IPN. The amount of introduced ionic drug (cefazoline) was greater than that of the nonionic drug (theophylline). Release behaviors of drug molecules from negatively charged PVA/PAAc IPN were switched on and off in a pulsatile pattern depending on the applied electric stimulus. The released amount and the release rate of drug were influenced significantly by the applied voltage, ionic group contents in IPN, ionic properties of drug solute, and the ionic strength of release medium. In addition, the ionic properties of drug molecules dramatically affected release behaviors, thus the release of ionic drug was much more enhanced than that of the nonionic drug. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1752–1761, 1999     

Effect of preparation methods on thermal properties of poly(acrylic acid)/silica composites

Poly(acrylic acid)-silica composites have been prepared by two different methods and thermally characterized. The glass transition temperature (T_g) of the PAA-SiO₂ system prepared by mixture method was found to be 120°C irrespective of the type and amounts of silica involved in this work. However, the T_g varied between 132°C and 113°C in the systems prepared by polymerization reaction depending upon the type of silica and percentage conversion. The composites prepared by mixture and polymerization method have been investigated by using thermogravimetry (TGA) to follow the kinetics of anhydride formation and thermal degradation reactions. The activation energy of thermal anhydride formation and thermal degradation reaction was not found to change very much with ratio of PAA-SiO₂ when the composites were prepared by simple mixing. For the composites prepared by polymerization method the activation energy of anhydride formation and thermal degradation reaction were observed to change with percentage conversion. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 891–895, 1998     

合成聚丙烯酸/凹凸棒复合保水剂的中试放大实验

在100 L的中试设备上,用水溶液聚合法,以丙烯酸和凹凸棒黏土为主要原料,以N,N-亚甲基双丙烯酰胺为交联剂,V-50和过硫酸钾复配作为引发体系,进行了聚丙烯酸/凹凸棒复合保水剂的中试放大实验。考察了各种制备条件对产品性能的影响,得到的最佳工艺条件为:引发温度22℃;丙烯酸的中和度为60%;w(凹凸棒)=30%~45%;w(丙烯酸)=30%~35%;w(N,N-亚甲基双丙烯酰胺)=0.2%;w(复合引发剂)=0.5%;m(V-50)∶m(过硫酸钾)=2∶3;w(十二烷基硫酸钠)<0.2%。最佳制备条件下中试产品在蒸馏水及w(NaC l)=0.9%的水溶液中的吸水倍数分别为550~700和55~75。中试实验表明,该工艺生产的产品性能稳定,为工业化生产提供了参考。     

Glass polyalkenoate dental cements based on physical blends of poly(acrylic acid) and poly(vinyl phosphonic acid)

Physical blends of spray-dried poly(acrylic acid), PAA, with poly(vinyl phosphonic acid), PVPA, have been prepared and used in experimental dental cements by mixing them with basic sub-45 μm acid-degradable fluoroaluminosilicate glass powders and adding water. The effect of varying the ratio of PAA to PVPA, of altering the molar mass of PAA, and of using glasses of differing basicity have been investigated. The compressive strengths of the best of the cements formed from these blends were comparable to those formed from the individual polyacids, i.e. about 160 MPa.     

Characterization of polyelectrolyte effect in poly(acrylic acid) solutions

The viscometric behavior of poly(acrylic acid) solutions, as well as their ion transport properties, were monitored as a function of polymer concentration and the addition of KOH in nonisoionic conditions. Polyelectrolyte effect was studied and characterized by conductivimetry as well as viscometric properties at the infinite dilution limit. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 191–196, 2003     

Study on superabsorbent composite. XI. Effect of thermal treatment and acid activation of attapulgite on water absorbency of poly(acrylic acid)/attapulgite superabsorbent composite

The effect of acid activation and thermal treatment of attapulgite on water absorbency of superabsorbent composite were investigated. Under the same preparation conditions, superabsorbent composite prepared with natural attapulgite exhibited a water absorbency of 639 g/g and it merely kept 71% of its initial water absorbency after 5 times of swelling–deswelling–reswelling test. However, superabsorbent composites prepared with 2–10 M hydrochloric acid acidified attapulgite and 100–400°C thermal treated attapulgite respectively exhibited the water absorbency of 884–1,241 g/g and 701–1,515 g/g. Also, those superabsorbent composites can keep 87% and 85% of their initial water absorbency after 5 times of swelling–deswelling–reswelling test, respectively. These results showed that, compared with superabsorbent composite prepared with natural attapulgite, the comprehensive water‐absorbing properties of poly(acrylic acid)/ attapulgite superabsorbent composites were improved effectively by acid activation and thermal treatment of attapulgite. This improvement of water absorbencies and gel strength of superabsorbent composite may be due to synthetical factors such as changes in the crystalline structure and the specific surface area and improvement of the number and the activity of hydroxyl groups of attapulgite, which in turn influence the grafting efficiency of monomer, crosslinking density, and the structure of superabsorbent composite network. POLYM. COMPOS., 28:397–404, 2007. © 2007 Society of Plastics Engineers