Synthesis and characterization of novel block copolymer from trans‐4‐hydroxy‐L‐proline and poly(ethylene glycol)

A series of novel ABA‐type block copolymers were synthesized by polymerization of trans‐4‐hydroxy‐L ‐proline (HyP) in the presence of various molecular weight poly(ethylene glycol)s (PEGs), a bifunctional OH‐terminated PEG using stannous octoate as catalyst. The optimal reaction conditions for the synthesis of the copolymers were obtained with 5 wt % stannous octoate at 140°C under vacuum (20 mmHg) for 24 h. The synthesized copolymers were characterized by IR spectroohotometry, proton nuclear magnetic resonance, differential scanning calorimetry, and Ubbelohde viscometer. The glass transition temperature (T_g) of the copolymers shifted to significantly higher temperature with increasing the number average degree of polymerization and HyP/PEO molar ratio. In contrast, the melting temperature (T_m) decreased with increasing the HyP/PEO molar ratio. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1581–1587, 2001     

Ring opening metathesis polymerization of dicyclopentadiene catalyzed by titanium tetrachloride adduct complexes with nitrogen‐containing ligands

Ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) catalyzed by titanium tetrachloride adduct complexes such as TiCl₄ · 2L [L = pyridine (1), 2‐methylpyridine (2), 2,4,6‐trimethylpyridine (3), 3‐aminopyridine (4), 2‐hyroxypyridine (5)] and CH₃Li as cocatalyst was reported. The polymer was characterized by IR and ¹H‐NMR methods. Five influencing factors were also discussed. The catalyst systems TiCl₄ · 2L/CH₃Li (L = 2‐methylpyridine, 2,4,6‐trimethylpyridine) appeared to be very active for the ROMP of DCPD. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 3247–3251, 2000     

Microwave‐irradiated ring‐opening polymerization of D,L‐lactide under atmosphere

Poly(D ,L ‐lactide) (PDLLA) was synthesized by microwave‐irradiated ring‐opening polymerization catalyzed by stannous octoate (Sn(Oct)₂) under atmosphere. The effects of heating medium, monomer purity, catalyst concentration, microwave irradiation time, and vacuum level were discussed. Under the appropriate conditions such as carborundum (SiC) as heating‐medium, 0.15% catalyst, lactide with purity above 99.9%, 450 W microwave power, 30 min irradiation time, and atmosphere, PDLLA with a viscosity–average molecular weight (M_η) over 2.0 × 10⁵ and a yield over 85% was obtained. The dismission of vacuum to ring‐opening polymerization of D ,L ‐lactide (DLLA) under microwave irradiation simplified the process greatly. The temperature under microwave irradiation and conventional heating was compared. The largely enhanced ring‐opening polymerization rate of DLLA under microwave irradiation was the coeffect of thermal effects and microwave effects. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2244–2247, 2006     

Synthesis of novel azo‐containing polyureas derived from 4‐[4′‐(2‐hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione

4‐[4′‐(2‐Hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione ( HNAPTD ) ( 1 ) has been reacted with excess amount of n‐propylisocyanate in DMF (N,N‐dimethylformamide) solution at room temperature. The reaction proceeded with high yield, and involved reaction of both N? H of the urazole group. The resulting bis‐urea derivative 2 was characterized by IR, ¹H‐NMR, elemental analysis, UV‐Vis spectra, and it was finally used as a model compound for the polymerization reaction. Solution polycondensation reactions of monomer 1 with Hexamethylene diisocyanate ( HMDI ) and isophorone diisocyanate ( IPDI ) were performed in DMF in the presence of pyridine as a catalyst and lead to the formation of novel aliphatic azo‐containing polyurea dyes, which are soluble in polar solvents. The polymerization reaction with tolylene‐2,4‐diisocyanate ( TDI ) gave novel aromatic polyurea dye, which is insoluble in most organic solvents. These novel polyureas have inherent viscosities in a range of 0.15–0.22 g dL^?1 in DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3177–3183, 2001     

Investigation of kinetics of 4‐methylpentene‐1 polymerization using Ziegler–Natta‐type catalysts

The kinetics of 4‐methylpentene‐1 (4MP1) polymerization by use of Ziegler–Natta‐type catalyst systems, M(acac)₃‐AlEt₃ (M = Cr, Mn, Fe, and Co), are investigated in benzene medium at 40°C. The effect of various parameters such as Al/M ratio, reaction time, aging time, temperature, catalyst, and monomer concentrations on the rate of polymerization and yield are examined. The rate of polymerization increased linearly with increasing monomer concentration with first‐order dependence, whereas the rate of polymerization with respect to catalyst concentration is found to be 0.5. For all cases, the polymer yield is maximum at an Al/M ratio of 2. The activation energies obtained from linear Arrhenius plots are in the range of 25.27–33.51 kJ mol^?1. It is found that the aging time to give maximum percentage yield of the polymer varies with the catalyst systems. Based on the experimental results, a plausible mechanism is proposed that envisages a free‐radical mechanism. Characterization of the resulting polymer product, for all the cases, through FTIR, ¹H‐NMR, and ¹³C‐NMR studies, showed isomerized polymeric structures with 1,4‐structure as dominant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2468–2477, 2003     

Synthesis and properties of a novel (main‐chain)– (side‐chain) polymeric peroxide

A novel (main‐chain)‐(side‐chain) vinyl polyperoxide, poly(dipentene peroxide) (PDP), an alternating copolymer of dipentene (DP) and oxygen, has been synthesized by thermal oxidative polymerization of DP. The PDP was characterized by ¹H NMR, ¹³C NMR, FTIR, DSC, TGA, and EI‐MS studies. The overall activation energies of the degradation from Kissinger's method were 28 and 33 kcal/mol, respectively, for the endocyclic and acyclic peroxide units. The side‐chain peroxy groups were found to be thermally more stable than the main chain. Above 45°C the rate of polymerization increases sharply at a particular instant showing an “autoacceleration” with the formation of knee point. The kinetics of autoacceleration has been studied at various temperatures (45–70°C) and pressures (50–250 psi). © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1549–1555, 2001     

The investigation of novel non‐metallocene catalysts with phenoxy‐imine ligands for ethylene (co‐)polymerization

Phthaldialdehyde and phthaldiketone were treated with substituted phenols of 2‐amino‐4‐methylphenol, 2‐amino‐5‐methylphenol and 2‐amino‐4‐t‐butylphenol, respectively, and then treated with transition metal halides of TiCl₄, ZrCl₄ and YCl₃. A series of novel non‐metallocene catalysts (1–12) with phenoxy‐imine ligands was obtained. The structures and properties of the catalysts were characterized by ¹H NMR and elemental analysis. The catalysts (1–12) were used to promote ethylene (co‐)polymerization after activation by methylaluminoxane. The effects of the structures and center atoms (Ti, Zr and Y) of these catalysts, polymerization temperature, Al/M (M = Ti, Zr and Y) molar ratio, concentration of the catalysts and solvents on the polymerization performance were investigated. The results showed that the catalysts were favorable for ethylene homopolymerization and copolymerization of ethylene with 1‐hexene. Catalyst 10 is most favorable for catalyzing ethylene homopolymerization and copolymerization of ethylene with 1‐hexene, with catalytic activity up to 2.93 × 10⁶ gPE (mol Y)^?1 h^?1 for polyethylene (PE) and 2.96 × 10⁶ gPE (mol Y)^?1 h^?1 for copolymerization of ethylene with 1‐hexene under the following conditions: polymerization temperature 50 °C, Al/Y molar ratio 300, concentration of catalyst 1.0 × 10^?4 L^?1 and toluene as solvent. The structures and properties of the polymers obtained were characterized by Fourier transform infrared spectroscopy, ¹³C NMR, wide‐angle X‐ray diffraction, gel permeation chromatography and DSC. The results indicated that the obtained PE catalyzed by 4 had the highest melting point of 134.8 °C and the highest weight‐average molecular weight of 7.48 × 10⁵ g mol^?1. The copolymer catalyzed by 4 had the highest incorporation of 1‐hexene, up to 5.26 mol%, into the copolymer chain. © 2012 Society of Chemical Industry     

Polymerization of acrylonitrile catalyzed by single yttrium tris(2,6‐di‐tert‐butyl‐4‐methyl phenolate)

Polymerization of acrylonitrile was carried out using yttrium tris(2,6‐di‐tert‐butyl 4‐methyl‐phenolate) (Y(OAr)₃) as single component catalyst for the first time. The effects of concentrations of the monomer and catalyst, kinds of rare earth element and solvent, as well as temperature and polymerization time were investigated. The overall activation energy of polymerization in n‐hexane and THF mixture is 18.3 kJ mol^?1. Polyacrylonitriles (PANs) obtained by using Y(OAr)₃ in n‐hexane and THF mixture at 50 °C are predominantly atactic, while yellow PANs obtained in DMF under the same conditions have a syndiotactic‐rich configuration (>50%), and their highly branched and/or cyclized structures have also been found. © 2002 Society of Chemical Industry     

Poly(pent‐1‐ene) Synthesized with the Syndiospecific Catalyst i‐Pr(Cp)(9‐Flu)ZrCl2/MAO

1‐Pentene was polymerized with the syndiospecific catalyst system i‐PrC(Cp)(9‐fluorenyl)ZrCl₂/MAO. The molar mass of the resulting polymers depends strongly on the reaction temperature and decreases from M̄_w = 126 000 at 0°C to M̄_w = 46 000 at 100°C, but is more or less independent of the monomer and the MAO concentration. The influence of reaction temperature and concentrations of MAO and monomer on the type of end‐groups generated during the chain termination, as well as on the type of stereoerror, was investigated. The degree of tacticity was dependent on the polymerization temperature with [rrrr] > 0.99 at 0°C and [rrrr] = 0.75 at 100°C.     

Synthesis of vinyl substitute poly(silphenylene‐siloxane) via silyl hydride‐dialkoxysilane process

The synthesis of vinyl‐substituted silphenylene‐siloxane polymer through B(C₆F₅)₃ catalyzed polycondensation of 1,4‐bis(dimethylsilyl)benzene and vinylmethyldimethoxysilane is described. ¹H‐NMR, ²⁹Si‐NMR, and UV spectroscopy indicate that the vinyl groups remain undamaged during the polycondensation reaction. No hydrosilylation side reaction is observed under the reaction conditions. The microstructure of the polymer is not perfectly alternating with a randomization of 20%. The temperature for 5% mass loss is 430°C in inert atmosphere and 417°C in oxidative atmosphere with a residue of 56% at 700°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Preparation and structural characterization of water‐soluble O‐hydroxypropyl chitin derivatives

Water‐soluble hydroxypropyl chitin (HPC) derivatives were prepared by the reaction of chitin with propylene oxide in homogeneous conditions using a dimethylacetamide/5% lithium chloride solvent system. The reaction conditions for a proper substitution of the hydroxypropyl group were an 80°C reaction temperature, 24‐h reaction time, and 48‐h aging time. ¹H‐NMR and ¹³C‐cross‐polarization/magic angle spinning NMR spectroscopy were used for determining the substitution value and reaction site of substitution. It was found that the substitution reaction occurred mainly at the C₆? OH group in the chitin molecules and water‐soluble chitin derivatives could be obtained at a substitution value higher than 0.35, which is known as a critical substitution value. X‐ray diffraction analysis and FTIR spectroscopy showed that the structural characteristics of HPC derivatives were dependent on the substitution value. As the substitution value of the HPC derivative increased the α‐chitin crystal structure changed to the water‐soluble β‐chitin form in higher substitution values. Differences in the interchenic hydrogen bonding, interplanar spacing of the crystal lattice plane, and crystallinity can explain the structural changes upon substitution. The thermal decomposition temperature was also related to the characteristics of the crystalline structure, depending on a critical substitution value. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2624–2632, 2001     

Synthesis and characterization of a random terpolymer of L‐lactide, ϵ‐caprolactone and glycolide

A random terpolymer of L ‐lactide (LL), ?‐caprolactone (CL) and glycolide (G) has been synthesized in bulk at 130 °C using stannous octoate as the coordination–insertion initiator. The terpolymer, poly(LL‐ran‐CL‐ran‐G), has been characterized by a combination of analytical techniques: GPC, ¹H NMR, ¹³C NMR, DSC and TG. Molecular weight characterization by GPC shows a unimodal molecular weight distribution with values of M _n = 1.01 × 10⁵ g mol^?1 and M _w / M _n = 2.17. Compositional and microstructural analysis by ¹H NMR and ¹³C NMR, respectively, reveal a terpolymer composition of LL:CL:G = 74:15:11 (mol%) with a chain microstructure consistent with random monomer sequencing. This latter view is supported by the terpolymer temperature transitions (T_g and T_m) from DSC and the thermal decomposition profile from TG. The results and, in particular, the conclusion that it is a random rather than a statistical terpolymer are discussed in the light of current theories regarding the mechanism of this type of polymerization. © 2001 Society of Chemical Industry     

Accelerated crystallization of poly(L‐lactide) by physical aging

The low‐temperature physical aging of amorphous poly(L ‐lactide) (PLLA) at 25–50°C below glass transition temperature (T_g) was carried out for 90 days. The physical aging significantly increased the T_g and glass transition enthalpy, but did not cause crystallization, regardless of aging temperature. The nonisothermal crystallization of PLLA during heating was accelerated only by physical aging at 50°C. These results indicate that the structure formed by physical aging only at 50°C induced the accelerated crystallization of PLLA during heating, whereas the structure formed by physical aging at 25 and 37°C had a negligible effect on the crystallization of PLLA during heating, except when the physical aging at 37°C was continued for the period as long as 90 days. The mechanism for the accelerated crystallization of PLLA by physical aging is discussed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Accelerant‐promoted free radical polymerization of methacrylates by stabilized nitroxide unimolecular initiators: synthesis and characterization

BACKGROUND: This investigation evaluates the effectiveness of initiator adducts for living and controlled polymerization of methacrylates, crosslinking of dimethacrylates and thermal stabilities of the resulting polymers. Adducts of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy with benzoyl peroxide and with azobisisobutyronitrile were prepared and evaluated as stabilized unimolecular initiators for the free radical polymerization of methacrylate monomers using sulfuric acid as catalyst. The monomers used were methyl methacrylate, triethylene glycol dimethacrylate (TEGDMA) and ethoxylated bisphenol A dimethacrylate (EBPADMA). RESULTS: Successful polymerization was achieved at 70 and 130 °C with reaction times ranging from 45 min to 120 h. The dispersity (D) of poly(methyl methacrylate) (PMMA) was 1.09–1.28. The livingness and extent of control over polymerization were confirmed with plots of M_n evolution as a function of monomer conversion and of the first‐order kinetics. The glass transition temperature (T_g) for PMMA was 123–128 °C. The degradation temperature (T_d) for PMMA was 350–410 °C. T_d for poly(TEGMA) was 250–310 °C and for poly(EBPADMA) was 320–390 °C. CONCLUSION: The initiators are suitable for free radical living and controlled polymerization of methacrylates and dimethacrylates under mild thermal and acid‐catalyzed conditions, yielding medium to high molecular weight polymers with low dispersity, high crosslinking and good thermal stability. Copyright © 2008 Society of Chemical Industry     

Ring‐opening polymerization of D,L‐lactide by rare earth 2,6‐dimethylaryloxide

Ring‐opening polymerization of D,L ‐lactide (LA) has been successfully carried out by using rare earth 2,6‐dimethylaryloxide (Ln(ODMP)₃) as single component catalyst or initiator for the first time. The effects of different rare earth elements, solvents, monomers and catalyst concentration as well as polymerization temperature and time on the polymerization were investigated. The results show that La(ODMP)₃ exhibits higher activity to prepare poly(D,L ‐lactide) (PLA) with a viscosity molecular weight of 4.5 × 10⁴ g mol^?1 and the conversion of 97 % at 100 °C in 45 min. The catalytic activity of Ln(ODMP)₃ has following sequence: La > Nd > Sm > Gd > Er > Y. A kinetic study has indicated that the polymerization is first order with respect to both monomer and catalyst concentration. The apparent activation energy of the polymerization of LA with La(ODMP)₃ is 69.6 kJ mol^?1. The analyses of polymer ends indicate that the LA polymerization proceeds according to ‘coordination–insertion’ mechanism with selective cleavage of the acyl–oxygen bond of the monomer. Copyright © 2004 Society of Chemical Industry     

Preparation and kinetic analysis of PS‐b‐PBA block copolymer by 4‐oxo‐TEMPO capped polystyrene macroinitiators

Polystyrene‐block‐poly(n‐butyl acrylate) block copolymers were prepared from 4‐oxo‐2,2,6,6‐tetramethylpiperidinooxy (4‐oxo‐TEMPO) capped polystyrene macroinitiators at a high temperature, 165°C. It was found that the number‐average molecular weight of PBA chains in block copolymers could reach above 10,000 rapidly at early stage of polymerization with a narrow polydispersity index of 1.2–1.4, but after that, the polymerization seemed to be retarded. Furthermore, according to the kinetic analysis, the concentration of 4‐oxo‐TEMPO was increased mainly by the hydrogen transfer reaction of hydroxylamine (4‐oxo‐TEMPOH) to growing radicals during polymerization. This increase in 4‐oxo‐TEMPO concentration could retard the growth of polymer chains. The rate constant of the hydrogen transfer reaction of 4‐oxo‐TEMPOH to growing radicals, k_H, estimated by the kinetic model is about 9.33 × 10⁴M^‐1s^?1 at 165°C. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of diacylglycerol‐enriched palm olein by phospholipase A1‐catalyzed partial hydrolysis

Partial hydrolysis of palm olein catalyzed by phospholipase A₁ (Lecitase Ultra) in a solvent‐free system was carried out to produce diacylglycerol (DAG)‐enriched palm olein (DEPO). Four reaction parameters, namely, reaction time (2–10 h), water content (20–60 wt‐% of the oil mass), enzyme load (10–50 U/g of the oil mass), and reaction temperature (30–60 °C), were investigated. The optimal conditions for partial hydrolysis of palm olein catalyzed by Lecitase Ultra were obtained by an orthogonal experiment as follows: 45 °C reaction temperature, 44 wt‐% water content, 8 h reaction time, and an enzyme load of 34 U/g. The upper oil layer of the reaction mixture with an acid value of 54.26 ± 0.86 mg KOH/g was first molecularly distilled at 150 °C to yield a DEPO with 35.51 wt‐% of DAG. The DEPO was distilled again at 250 °C to obtain a DAG oil with 74.52 wt‐% of DAG. The composition of the acylglycerols of palm olein and the DEPO were analyzed and identified by high‐performance liquid chromatography (HPLC) and HPLC/electrospray ionization/mass spectrometry. The released fatty acids from the partial hydrolysis of palm olein catalyzed by phospholipase A₁ showed a higher saturated fatty acid content than that of the raw material.     

An investigation into the degree and rate of polymerization of poly(methyl methacrylate) in the ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate

Room‐temperature ionic liquids (ILs), including 1‐butyl‐3‐methylimidazolium hexafluorophosphate, [bmim⁺][PF₆^?], were investigated as replacements for volatile organic compounds in the free‐radical solution polymerization of poly(methyl methacrylate) (PMMA). The latter was synthesized in benzene and [bmim⁺][PF₆^?] at 70 °C via a free‐radical process and the degree and rate of polymerization were compared based on the solvent used. The degree of polymerization was found to be five times higher in [bmim⁺][PF₆^?] than in benzene, while the rate of reaction was approximately four times faster in [bmim⁺][PF₆^?]. The results indicate the potential for using ILs to produce high‐molecular‐weight polymers and block structures based on the increased free‐radical stability in ILs. Copyright © 2004 Society of Chemical Industry     

Preparation of thermal‐responsive poly(propylene) membranes grafted with n‐isopropylacrylamide by plasma‐induced polymerization and their water permeation

Poly(propylene) (PP) membrane grafted with poly(N‐isopropylacrylamide) (PNIPAAm), which is known to have a lower critical solution temperature (LCST) at around 32°C, was prepared by the plasma‐induced graft polymerization technique. Graft polymerization of PNIPAAm onto a PP membrane was confirmed by microscopic attenuated total reflection/Fourier transform IR spectroscopy. The grafting yield of PNIPAAm increased with the concentration of N‐isopropylacrylamide monomer and the reaction time of graft polymerization. The average pore size of the PP membrane also affected the grafting yield. From the field emission scanning electron microscopy (FE‐SEM) measurement, we observed a morphological change in the PP‐g‐PNIPAAm membrane under wet conditions at 25°C below LCST. The permeability of water through the PP‐g‐PNIPAAm membrane was controlled by temperature. The PP‐g‐PNIPAAm membrane (PN05 and PN10) exhibited higher water permeability (L_p) than the original PP substrate membrane below LCST. As the temperature increased to above LCST, L_p gradually decreased. In addition, the graft yield of PNIPAAm and the average pore size of the PP substrate influenced water permeability. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1168–1177, 2002; DOI 10.1002/app.10410     

Kinetics of hydrogenation of 4‐chloro‐2‐nitrophenol catalyzed by Pt/carbon catalyst

Hydrogenation of 4‐chloro‐2‐nitrophenol (CNP) was carried out at moderate hydrogen pressures, 7–28 atm, and temperatures in the range 298–313 K using Pt/carbon and Pd/γ‐Al₂O₃ as catalysts in a stirred pressure reactor. Hydrogenation of CNP under the above conditions gave 4‐chloro‐2‐aminophenol (CAP). Dechlorination to form 2‐aminophenol and 2‐nitrophenol is observed when hydrogenation of CNP is carried out above 338 K, particularly with Pd/γ‐Al₂O₃ catalyst. Among the catalysts tested, 1%Pt/C was found to be an effective catalyst for the hydrogenation of CNP to form CAP, exclusively. To confirm the absence of gas–liquid mass transfer effects on the reaction, the effect of stirring speed (200–1000 rpm) and catalyst loading (0.02–0.16 g) on the initial reaction rate at maximum temperature 310 K and substrate concentration (0.25 mole) were thoroughly studied. The kinetics of hydrogenation of CNP carried out using 1%Pt/C indicated that the initial rates of hydrogenation had first order dependence with respect to substrate, catalyst and hydrogen pressure in the range of concentrations varied. From the Arrhenius plot of ln rate vs 1000/T, an apparent activation energy of 22 kJ mol^?1 was estimated. © 2001 Society of Chemical Industry