Thermoreversible hydrogels. IX. Swelling behaviors of thermosensitive hydrogels copolymerized by N‐isopropylacrylamide with 1‐vinyl‐3‐(3‐sulfopropyl) imidazolium betaine

A series of thermosensitive hydrogels were prepared from the various molar ratios of N‐isopropylacrylamide, 1‐vinyl‐3‐(3‐sulfopropyl) imidazolium betaine (VSIB), and N,N′‐methylene‐bis‐acrylamide. The influence of the amount of VSIB in the copolymeric gels on the swelling behaviors in water, in various saline solutions, and at various temperatures was investigated. The results indicated that the higher the VSIB content in the hydrogel system, the higher the swelling ratio and the gel transition temperature. In the saline solution the results showed that when the concentration of salt is higher than the minimum salt concentration (MSC) of poly(VSIB), the deswelling behavior of the copolymeric gel was more effectively suppressed as more VSIB was added to the copolymeric gels. In addition, only the sample containing 12 mol % VSIB (V4) exhibited an antipolyelectrolyte's swelling behavior when the concentration of salt was higher than the MSC of poly(VSIB). This means that the swelling ratio of the hydrogel can be improved with a higher concentration salt solution. In addition, the anion effects were larger than the cation effects in the presence of a common anion (Cl⁻) with different cations and a common cation (K⁺) with different anions for the hydrogel. Finally, the more VSIB in the hydrogel, the higher the diffusion coefficient in dynamic swelling. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 14–23, 2000     

pH‐reversible hydrogels. IV. Swelling behavior of the 2‐hydroxyethyl methacrylate‐co‐acrylic acid‐co‐sodium acrylate copolymeric hydrogels

A series of 2‐hydroxyethyl methacrylate (HEMA) and sodium acrylate (SA50) copolymeric gels were prepared from HEMA and the anionic monomer SA50 with various molar ratios. The influence of SA50 on the copolymeric gels on their swelling behavior in deionized water at different temperatures and various pH buffer solutions was investigated. Results indicated that the poly(2‐hydroxyethyl methacrylate) (PHEMA) hydrogels exhibited an overshooting phenomenon in their dynamic swelling behavior. The maximum overshooting value decreased with increasing of the temperature. The same results were also found in the HEMA/SA50 copolymeric gels with a lower SA50 content. On the contrary, the overshooting phenomenon for HEMA/SA50 copolymeric gels with a higher content of SA50 was exhibited only under higher temperature (over 35°C). These copolymer gels were used to assess drug release and drug delivery in this article. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1360–1371, 2001     

Poly(2-hydroxyethyl methacrylate-co-sulfobetaine) hydrogels. II. Synthesis and swelling behaviors of the [2-hydroxyethyl methacrylate-co-3-dimethyl(methacryloyloxyethyl)ammonium propane sulfonate] hydrogels

A series of the 2-hydroxyethyl methacrylate/3-dimethyl-(methacryloyloxyethyl)ammonium propane sulfonate (HEMA/DMAPS) copolymeric gels was prepared from various molar ratios of HEMA and the zwitterionic monomer DMAPS. The influence of the amount of the zwitterionic monomer in the copolymeric gels on the swelling behaviors in water, various saline solutions, and temperature was investigated. The results indicate that the PHEMA hydrogel (D0) and lower DMAPS content of the HEMA/DMAPS copolymeric gel (D1) exhibit overshooting phenomena in the dynamic swelling behavior. The maximum overshooting value decreases with increase in temperature. In the equilibrium swelling ratio, the PHEMA hydrogel exhibits a minimum swelling ratio at 55°C. Then, the minimum swelling ratio diminishes gradually with increasing of the DMAPS content in the HEMA/DMAPS copolymeric gels. In the saline solution, the swelling ratios of HEMA/DMAPS copolymeric gels increase rapidly with increasing of concentration of the salt with a smaller ratio of the charge/radius. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 2021–2034, 1998     

Thermoreversible hydrogels. VIII. Effect of a zwitterionic monomer on swelling behaviors of thermosensitive hydrogels copolymerized by N‐isopropylacrylamide with N,N′‐dimethyl (acrylamidopropyl) ammonium propane sulfonate

A series of thermosensitive hydrogels were prepared from the various molar ratios of N‐isopropylacrylamide, zwitterionic monomer, N,N′‐dimethyl (acrylamidopropyl) ammonium propane sulfonate (DMAAPS), and N,N′‐methylene‐bis‐acrylamide. The influence of the amount of DMAAPS in the copolymeric gels on the swelling behaviors in water, various saline solutions, and various temperatures was investigated. Results indicated that the higher the DMAAPS content in the hydrogel system, the higher the swelling ratio and the gel transition temperature. In the saline solution results showed that, when the salt concentration was greater than the minimum salt concentration (MSC) of poly(DMAAPS), the deswelling behavior of the N‐isopropylacrylamide gel was suppressed more effectively when more DMAAPS was added into the copolymeric gels; but the swelling ratios of the present copolymeric gels did not significantly change while the salt concentration was lower than the MSC of poly(DMAAPS). In addition, only the sample containing 12 mol % DMAAPS (D4) exhibited an antipolyelectrolyte's swelling behavior when the salt concentration was greater than the MSC of poly(DMAAPS). In other words, only when the amount of DMAAPS added into the gel is over some proportion, can the hydrogel show an antipolyelectrolyte's swelling behavior in concentrated salt solution. In saline solutions, the anion effects were greater than the cation effects in the presence of common anion (Cl⁻) with different cations and common cation (K⁺) with different cations for these gels. Finally, the more DMAAPS content in the hydrogel, the higher the diffusion coefficient in dynamic swelling. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2170–2180, 1999     

Poly[2-(hydroxyethyl methacrylate)-co-(sulfobetaine)]s hydrogels: 1. Synthesis and swelling behaviors of the 2-(hydroxyethyl methacrylate)-co-2-(vinyl-1-pyridinium propane sulfonate) hydrogels

A series of the 2-hydroxyethyl methacrylate/2-vinyl-l-pyridinium propane sulfonate (HEMA/VPPS) copolymeric gels have been prepared from HEMA and zwitterionic monomer VPPS of various molar ratios. The influence of the amount of VPPS in copolymeric gels on their swelling behavior in water and various saline solutions at different temperatures was investigated. Results indicate that the PHEMA hydrogels exhibit an overshooting phenomenon in their dynamic swelling behavior. The maximum overshooting value decreases with increasing temperature. The same results are also shown for the lower VPPS content HEMA/VPPS copolymeric gels. In the equilibrium swelling ratio, the PHEMA hydrogel exhibits a minimum swelling ratio at 55 °C. Then, the minimum swelling ratio disappears gradually with increasing VPPS content in HEMA/VPPS copolymeric gels. In the saline solution, the swelling ratios of HEMA/VPPS copolymeric gels increase rapidly with increasing salt concentration, for salts with a smaller ratio of charge/radius.     

pH‐thermoreversible hydrogels. I. Synthesis and swelling behaviors of the (N‐isopropylacrylamide‐co‐acrylamide‐co‐2‐hydroxyethyl methacrylate) copolymeric hydrogels

A series of pH‐thermoreversible hydrogels that exhibited volume phase transition was synthesized by various molar ratios of N‐isopropylacrylamide (NIPAAm), acrylamide (AAm), and 2‐hydroxyethyl methacrylate (HEMA). The influence of environmental conditions such as temperature and pH value on the swelling behavior of these copolymeric gels was investigated. Results showed that the hydrogels exhibited different equilibrium swelling ratios in different pH solutions. Amide groups could be hydrolyzed to form negatively charged carboxylate ion groups in their hydrophilic polymeric network in response to an external pH variation. The pH sensitivities of these gels also depended on the AAm content in the copolymeric gels; thus the greater the AAm content, the higher the pH sensitivity. These hydrogels, based on a temperature‐sensitive hydrogel, demonstrated a significant change of equilibrium swelling in aqueous media between a highly solvated, swollen gel state and a dehydrated network response to small variations of temperature. pH‐thermoreversible hydrogels were used for a study of the release of a model drug, caffeine, with changes in temperature. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 221–231, 1999     

Thermoreversible hydrogels X: Synthesis and swelling behavior of the (N‐isopropylacrylamide‐co‐sodium 2‐acrylamido‐2‐methylpropyl sulfonate) copolymeric hydrogels

A series of thermosensitive hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm) and sodium‐2‐acrylamido‐2‐methylpropyl sulfonate (NaAMPS). Factors such as temperature and initial total monomer concentration and different pH solutions were investigated. Results indicated that the more the NaAMPS content in hydrogel system, the higher the swelling ratio and the gel transition temperature; the higher the initial monomer concentration, the lower the swelling ratio. The result also indicated that the NIPAAm/NaAMPS copolymeric hydrogels had different swelling ratios in various pH environments. The present gels showed a pH‐reversible property between pH 3 and pH 10 and thermoreversibility. The swelling ratios of copolymeric gels were lower in a strong alkaline environment because the gels were screened by counterions. Finally, the drug release behavior of these gels was also investigated in this article. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1760–1768, 2000     

Synthesis and characterization of poly(HEMA‐MAA) hydrogel carrier for oral delivery of insulin

Poly(HEMA‐MAA) hydrogel particles were synthesized by redox free‐radical polymerization using 2‐hydroxyethylmethacrylate, different concentration of methacrylic acid as monomer, ethyleneglycol dimethacrylate as crosslinking agent, and APS/TEMED as free‐radical initiator. Fourier transform infrared spectrum of poly(HEMA‐MAA) hydrogels showed intense absorption peak of carbonyl group at ～ 1700 cm^?1 due to carboxylic acid groups of MAA, peak at ～ 2960 cm^?1 due to CH stretching and vinylic peak at 1700 cm^?1 independent of MAA concentration. Highest swelling percentage 587% was observed in case of poly(HEMA‐MAA) hydrogel synthesized using 30% of MAA while lowest swelling percentage 413% was observed in hydrogel synthesized 10% of MAA at basic pH (8.0). Scanning electron micrograph of copolymeric particles showed the irregular shape of poly(HEMA‐MAA) particles with conglomeration with each due to ionization of carboxylic groups. Insulin was radiolabeled using technetium‐99m radionuclide and the radiolabeling efficiency was found to be 99%. Poly(HEMA‐MAA) hydrogel having 60% of MAA showed the highest insulin loading efficiency of 68% while lowest 37% was observed in case of 10% MAA hydrogel. Insulin release studies showed only 35–65% of insulin was released into the medium from particles at pH 2.5 in 60 min, while insulin release was significantly higher at pH 7.4. Hypoglycemic effect of the 60 and 80 I.U./kg insulin dose loaded in poly(HEMA‐MAA) copolymeric particles were carried out in fasted diabetic rats and highest decrease in blood glucose level from 506 mg/dL to 170 mg/dL was observed within first 3 h. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Thermoreversible hydrogel. XVII. Investigation of the drug release behavior for [N‐isopropylacrylamide‐co‐trimethyl acrylamidopropyl ammonium iodide‐co‐3‐dimethyl (methacryloyloxyethyl) ammonium propane sulfonate] copolymeric hydrogels

A series of copolymeric hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm), trimethyl acrylamidopropyl ammonium iodide (TMAAI), and 3‐dimethyl (methacryloyloxyethyl) ammonium propane sulfonate (DMAPS). Results showed that the swelling ratios of these copolymeric hydrogels increased with an increase of TMAAI content. The drug release behavior of the ionic thermosensitive hydrogels related to their ionicity and drug types. Results indicated that the release ratio of caffeine in the hydrogels was not affected by the ionicity of hydrogels, but increased with increasing of the swelling ratio. The anionic solute (phenol red) strongly interacted with cationic hydrogel (very large K_d), so the phenol red release ratio in cationic gels was very low. On the other hand, CV was adsorbed only on the skin layer of the cationic hydrogel because of the charge repulsion, and released rapidly. Therefore the release ratio was highest for cationic hydrogel to cationic drug. In addition, the partition coefficients (K_d) and the drug delivery behavior of the present gels were also investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1592–1598, 2002     

Release of vitamin B12 from poly(N‐vinyl‐2‐pyrrolidone)‐crosslinked polyacrylamide hydrogels: A kinetic study

Hydrogels, composed of poly(N‐vinyl‐2‐pyrrolidone) and crosslinked polyacrylamide, were synthesized and the release of vitamin B₁₂ from these hydrogels was studied as a function of the degree of crosslinking and pH of the external swelling media. The three drug‐loaded hydrogel samples synthesized with different crosslinking ratios of 0.3, 0.7, and 1.2 (in mol %) follow different drug‐release mechanisms, that is, chain relaxation with zero‐order, non‐Fickian and Fickian, or diffusion‐controlled mechanisms. To establish a correlation between their swelling behavior and drug‐release mechanism, the former was studied by the weight‐gain method and, at the same time, the concentration of the drug released was studied colorimetrically. Various swelling parameters such as the swelling exponent n, gel‐characteristic constant k, penetration velocity v, and diffusion coefficient D were evaluated to reflect the quantitative aspect of the swelling behavior of these hydrogels. Finally, the drug‐release behavior of the hydrogels was explained by proposing the swelling‐dependent mechanism. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1706–1714, 2000     

Colon‐specific oral delivery of vitamin B2 from poly(acrylamide‐co‐maleic acid) hydrogels: An in vitro study

Hydrogels, composed of poly(acrylamide‐co‐maleic acid) were synthesized and the release of vitamin B₂ from these gels was studied as a function of the pH of the external media, the initial amount of the drug loaded, and the crosslinking ratio in the polymer matrix. The gels containing 3.8 mg of the drug per gram gel exhibit almost zero‐order release behavior in the external media of pH 7.4 over the time interval of more than their half‐life period (t_1/2). The amount of the drug loaded into the hydrogel also affected the dynamic release of the encapsulated drug. As expected, the gels showed a complete swelling‐dependent mechanism, which was further supported by the similar morphology of the swelling and release profiles of the drug‐loaded sample. The hydrophilic nature of the drug riboflavin does not contribute toward the zero‐order release dynamics of the hydrogel system. On the other hand, the swelling osmotic pressure developed between the gels and the external phase, due to loading of the drug by equilibration of the gels in the alkaline drug solution, plays an effective role in governing the swelling and release profiles. Finally, the minimum release of the drug in the swelling media of pH 2.0 and the maximum release with zero‐order kinetics in the medium of pH 7.4 suggest that the proposed drug‐delivery devices have a significant potential to be used as an oral drug‐delivery system for colon‐specific delivery along the gastrointestinal (GI) tract. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1133–1145, 2002; DOI 10.1002/app.10402     

Radiation synthesis and characterization of 2‐hydroxyethyl‐methacrylate‐based hydrogels containing di‐ and tri‐protic acid and its application on wastewater treatment

Radiation‐crosslinked 2‐hydroxyethylmethacrylate/citric acid (HEMA/CAc), 2‐hydroxyethylmethacrylate/tartaric acid (HEMA/TA), and 2‐hydroxyethylmethacrylate/succinic acid (HEMA/Sc) copolymers were prepared by using ⁶⁰Co γ‐rays. The gel fraction yield and the swelling behavior of the prepared hydrogels were studied. It was shown that increasing irradiation doses was accompanied by an increase in yield of gel fraction and a decrease in swelling degree. The parameters of equilibrium swelling, maximum swelling, initial swelling rate, swelling exponent, and diffusion coefficient of the hydrogels were determined by studying the swelling behavior of the hydrogels prepared. It was seen that the equilibrium swelling degree increases as the content of acid increases, as a result of introducing more hydrophilic groups. When the hydrophilic polymer (acids) varies in the content range of 40–80 mg, swelling exponents (n) decreases, thereby indicating a shift in the water‐transport mechanism from the anomalous (non‐Fickian)‐type to the Fickian‐type. Characterization and some selected properties of the prepared hydrogels were studied, and accordingly the possibility of its practical use in the treatment of industrial wastes such as dyes and heavy metals (Fe, Ni, Co, and Cu) were also studied. The effect of treatment time, pH of feed solution, initial feed concentration, and temperature on the dye and heavy metals uptake was determined. The uptake order for a given metal was HEMA/TA hydrogel > HEMA/CAc > HEMA/Sc hydrogel. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Swelling behavior of pH‐ and temperature‐sensitive copolymers containing 2‐hydroxy‐ethyl methacrylate and N‐vinyl‐2‐pyrrolidone crosslinked with new crosslinkers

Copolymers of 2‐hydroxyethyl methacrylate (HEMA) and N‐vinyl‐2‐pyrrolidone (VP) and homopolymers of HEMA and VP were crosslinked in the presence of different mol% of melamine trimethacrylamide (MMAm) and melamine triacrylamide (MAAm) as crosslinkers by bulk radical polymerization. The resultant xerogels were characterized by extracting the soluble fractions and measuring the equilibrium water content. Lower critical solution transition temperatures (LCST) were measured by DSC. The properties of crosslinked HEMA and VP copolymers, VP and HEMA series were evaluated in terms of compositional drift of polymerization, heterogeneous crosslinking, and chemical structure of the relevant components. Soluble fractions of the crosslinked networks were reduced by varying the MAAm and MMAm concentrations. The influence of environmental conditions such as temperature and pH on the swelling behavior of these polymeric gels was investigated. The swelling behaviors of the resulting gels show pH sensitivity. This behavior is explained on the basis that amide groups of VP or crosslinkers could be hydrolyzed to form negatively charged carboxylate ion groups in the produced networks in response to an external pH variation. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of 2‐hydroxyethylmethacrylate/2‐(3‐indol‐yl)ethylmethacrylamide‐based novel hydrogels as drug carrier with in vitro antibacterial properties

In this study, a new cationic monomer 2‐(3‐indol‐yl)ethylmethacrylamide (IEMA) derived from tryptamine was synthesized in a single step and characterized by Fourier transform infrared (FTIR), ¹H‐NMR, and ¹³C‐NMR. Then, one‐step preparation of novel poly[2‐hydroxyethylmethacrylate‐c‐2‐(3‐indol‐yl)ethylmethacrylamide], or p(HEMA‐c‐IEMA), copolymeric hydrogels has been performed successfully with IEMA and 2‐hydroxyethylmethacrylate (HEMA) as monomers using free radical aqueous polymerization. The hydrogels were characterized with scanning electron microscopy, FTIR, elemental analysis, thermogravimetric analysis, and texture profile analysis instruments. p(HEMA‐c‐IEMA) hydrogels were used for swelling, diffusion, drug release, and antibacterial activity studies. The drug‐release behavior of the hydrogels was determined as a function of time at 37 °C in pH 1.2 and 7.2. The swelling and drug‐release studies showed that an increased IEMA amount caused a higher increase in swelling and drug‐release values. Additionally, zero‐order, first‐order, and Higuchi equation kinetic models were applied to the drug‐release data, and the data fit well in the Higuchi model, and the Peppas power‐law model was applied to the release mechanism. Finally, the antibacterial activities of the hydrogels were screened against Gram‐positive bacteria (Bacillus cereus and Staphylococcus aureus) and Gram‐negative bacteria (Escherichia coli and Salmonella typhimurium). © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45550.     

Ion-stimuli responsive dimethylaminoethyl methacrylate/hydroxyethyl methacrylate copolymeric hydrogels: mutual influence of reaction parameters on the swelling and mechanical strength

Novel ion-stimulus-responsive copolymeric hydrogels were synthesized by free radical crosslinking copolymerization from the monomers N,N-dimethylaminoethyl methacrylate (DMAEMA) and 2-Hydroxyethyl methacrylate (HEMA) in the presence of a crosslinker, diethyleneglycol dimethacrylate (DEGDMA). The influences of the reaction parameters, the comonomer composition and the ionic strength of salt solutions on the swelling behavior of P(DMAEMA-co-HEMA) hydrogels were examined. The ion-stimulus-responsive swelling behavior of the prepared copolymers was studied in water as well as in aqueous solutions of NaCl, KCl, KBr, KI, CaCl₂, BaCl₂ and MgCl₂. It was found that, starting from some characteristic concentration of a salt, a further increase of the salt concentration results in the shrinking of copolymeric P(DMAEMA-co-HEMA) hydrogels. The Flory-Rehner theory correctly predicts the swelling behavior of the hydrogels in salt solutions if the variation of the comonomer HEMA content is taken into account. The calculation of the interaction parameter χ between P(DMAEMA-co-HEMA) network and water showed that the specific interactions between cations and side groups of polymeric network affect the mixing term of the free energy. The extent and kinetics of water absorption were studied to determine their relationship with the reaction parameters. The kinetics of the hydrogel collapse is strongly dependent on the kind of salt used. The swelling results will be useful in designing and developing novel controlled delivery systems.     

Thermoreversible hydrogels. XIX. Synthesis and swelling behavior and drug release behavior for the N‐isopropylacrylamide/poly(ethylene glycol) methylether acrylate copolymeric hydrogels

A series of thermosensitive copolymeric hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm) and poly(ethylene glycol) methylether acrylate (PEGMEA_n), which was synthesized from acryloyl chloride and poly(ethylene glycol) mono methylether with three oxyethylene chain lengths. Investigation of the effect of the chain length of oxyethylene in PEGMEA_n, and the amount of the PEGMEA_n in the NIPAAm/PEGMEA_n copolymeric gels, on swelling behavior in deionized water was the main purpose of this study. Results showed that the swelling ratio for the present copolymeric gels increased with increasing chain length of oxyethylene in PEGMEA_n and also increased with increase in the amount of PEGMEA_n in the copolymeric gels. However, the gel strength and effective crosslinking density of these gels decreased with increase in swelling ratio. Some kinetic parameters were also evaluated in this study. Finally, the drug release and drug delivery behavior for these gels were also assessed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1683–1691, 2003     

Synthesis,characterization, and swelling behavior of new pH‐sensitive hydrogels derived from copolymers of 2‐hydroxyethyl methacrylate and 2‐(diisopropylamino)ethylmethacrylate

The aim of this work was to synthesize and to characterize new pH‐sensitive hydrogels that can be used in the controlled release of drugs, useful for dermal treatments or ophthalmology's therapies. Copolymers containing 2‐hydroxyethyl methacrylate (HEMA) with different amounts of 2‐(diisopropylamino)ethyl methacrylate (DPA) (10 and 30 wt %) and different amounts of crosslinker agent, ethylene glycol dimethacrylate (EGDMA) (1 and 3 wt %) were prepared by bulk photo‐polymerization. The copolymers were fully characterized by using Fourier‐transform infrared (FTIR) spectra, differential scanning calorimetry, thermogravimetric analysis, UV–visible spectroscopy, and measuring water content and dynamic swelling degree. The results show that modifications in the amount of DPA and/or crosslinker in the hydrogel produce variations in the thermal properties. When adding of DPA, we observed an increase in the thermal stability and decomposition temperature, as well as a change in the mechanism of decomposition. Also a decrease in the glass transition temperature was observed with regard to the value for pure pHEMA, by the addition of DPA. The water content of the hydrogels depends on the DPA content and it is inversely proportional to both the pH value and the crosslinking degree. Pure poly‐HEMA films did not show important changes over the pH range studied in this work. The dynamic swelling curves show the overshooting effect associated with the incorporation of DPA, the pH of the solution, and the crosslinking density. On the other hand, no important variations in the optical properties were observed. The synthesized hydrogels are useful as a drug delivery pH‐sensitive matrix. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Fabrication of citric acid crosslinked β‐cyclodextrin/hydroxyethylcellulose hydrogel films for controlled delivery of poorly soluble drugs

β‐cyclodextrin grafted hydroxyethylcellulose (βCD‐g‐HEC) hydrogel films were prepared for the controlled release of poorly soluble model drug (ketoconazole) using citric acid as crosslinking agent. The active βCD and carboxyl content of the hydrogel films were determined by phenolphthalein assay and acid–base titration. The films were characterized by solid state ¹³C NMR, ATR–FTIR, thermogravimetric analysis, and differential scanning calorimetric, and analyzed for tensile strength, swelling ratio, drug loading, release, hemocompatibility, in vitro cytotoxicity, and implantation test. An increase in the concentration of βCD in feed increased the active βCD content of the hydrogel films but reduced their extent of interpolymer crosslinking. The βCD‐g‐HEC hydrogel films with high active βCD content showed maximum drug loading whereas those with high crosslinking density were capable of controlling the drug release for long duration. Hemolysis assay and in vitro cytotoxicity study revealed the biocompatible nature of the hydrogel films whereas implantation test indicated their minimal inflammatory effect. From the overall results, βCD‐g‐HEC hydrogel films were found to be better alternative to the previously reported βCD‐HPMC and βCD‐CMC hydrogel films for enhanced loading and long‐term release, respectively, of the poorly soluble drugs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46452.     

Swelling and drug‐release behavior of the poly(AA‐co‐N‐vinyl pyrrolidone)/chitosan interpenetrating polymer network hydrogels

A series of novel hydrogels were prepared from acrylic acid (AA), N‐vinyl pyrrolidone (NVP), and chitosan by photopolymerization. The swelling behavior, gel strength, and drug release behavior of the poly(AA/NVP) copolymeric hydrogels and corresponding interpenetrating polymer network hydrogels were investigated. Results showed that the swelling ratios for the present hydrogels decreased with an increase of NVP content in the gel, but the gel strength increased with an increase of NVP content in the gel. Results also showed that the drug‐release behavior for the gels is related to the ionicity of drug and the swelling ratio of the gel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2135–2142, 2004     

Synthesis and characterization of amphiphilic pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine copolymers and their micelles as a drug carrier

A new Pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine (DPPE) (Pluronic (F68)–DPPE) copolymer was synthesized with Pluronic (F68) and DPPE. The chemical structure and physical properties of copolymers were determined by FTIR, ¹H NMR, ¹³C NMR, ³¹P NMR, and TGA. Environmental scanning electron microscopy, fluorescence spectroscopy, and dynamic light scattering method confirmed the formation of copolymeric micelles of Pluronic (F68)‐DPPE. To estimate the feasibility as novel drug carriers, the copolymer micelles were prepared by the phase separation dialysis method. Amphotericin B as a lipophilic model drug was incorporated into copolymeric micelles and the drug release behavior was investigated. It was found that the chemical composition of the micelle was a key factor in controlling micelles size, drug‐loading content, and drug release behavior. As DPPE segment weight ratio increased, the micelle size and drug‐loading content increased, and the drug release rate decreased. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010