Synthesis of poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate) triblock copolymer by atom transfer radical polymerization

The synthesis of triblock copolymer poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate), using atom transfer radical polymerization (ATRP), is reported. The copolymers were prepared in two steps. First, polystyrene was synthesized by ATRP using α,α′‐dichloro‐p‐xylene/CuBr/bpy as the initiating system; Second, polystyrene was further used as macroinitiator for the ATRP of octadecyl acrylate to prepare ABA triblock copolymers in the presence of FeCl₂·4H₂O/PPh₃ in toluene. Polymers with controlled molecular weight (M_n = 17,000–23,400) and low polydispersity index value (1.33–1.44) were obtained. The relationship between molecular weight versus conversion showed a straight line. The effect of reaction temperature on polymerization was also investigated, showing a faster polymerization rate under higher temperature. The copolymers were characterized by FTIR, ¹H‐NMR, DSC, and GPC and the crystallization behavior of the copolymers was also studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1539–1545, 2004     

Atom transfer radical polymerization grafting of highly functionalized polystyrene and poly(4‐methylstyrene) macroinitiators with tert‐butyl acrylate

Two monodisperse graft copolymers, poly(4‐methylstyrene)‐graft‐poly(tert‐butyl acrylate) [number‐average molecular weight (M_n) = 37,500, weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.12] and polystyrene‐graft‐poly(tert‐butyl acrylate) (M_n = 72,800, M_w/M_n = 1.12), were prepared by the atom transfer radical polymerization of tert‐butyl acrylate catalyzed with Cu(I) halides. As macroinitiators, poly{(4‐methylstyrene)‐co‐[(4‐bromomethyl)styrene]} and poly{styrene‐co‐[4‐(1‐(2‐bromopropionyloxy)ethyl)styrene]}, carrying 40% of the bromoalkyl functionalities along the chain, were used. The dependencies of molecular parameters on monomer conversion fulfilled the criteria for controlled polymerizations. In contrast, the dependencies of monomer conversion versus time were nonideal; possible causes were examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2930–2936, 2002     

Atom transfer radical polymerization of styrene and methyl (meth)acrylates initiated with poly(dimethylsiloxane) macroinitiator: Synthesis and characterization of triblock copolymers

Poly(dimethylsiloxane)(PDMS)‐based triblock copolymers were successfully synthesized via atom transfer radical polymerization (ATRP) initiated with bis(bromoalkyl)‐terminated PDMS macroinitiator (Br‐PDMS‐Br). First, Br‐PDMS‐Br was prepared by reaction between the bis(hydroxyalkyl)‐terminated PDMS and 2‐bromo‐2‐methylpropionyl bromide. PSt‐b‐PDMS‐b‐PSt, PMMA‐b‐PDMS‐b‐PMMA and PMA‐b‐PDMS‐b‐PMA triblock copolymers were then synthesized via ATRP of styrene (St), methyl methacrylate (MMA) and methyl acrylate (MA), respectively, in the presence of Br‐PDMS‐Br as a macroinitiator and CuCl/PMDETA as a catalyst system at 80 ^oC. Triblock copolymers were characterized by FTIR, ¹H‐NMR and GPC techniques. GPC results showed linear dependence of the number‐average molecular weight on the conversion as well as the narrow polydispersity indicies (PDI < 1.57) for the synthesized triblock copolymers which was lower than that of Br‐PDMS‐Br macroinitiator (PDI = 1.90), indicating the living/controlled characteristic of the reaction. Also, there was a very good agreement between the number‐average molecular weight calculated from ¹HNMR spectra and that calculated theoretically. Results showed that resulting copolymers have two glass transition temperatures, indicating that triblock copolymers have microphase separated morphology. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of poly(n‐butyl methacrylate)‐b‐polystyrene diblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate) (PBMA)‐b‐polystyrene (PSt) diblock copolymers were synthesized by emulsion atom transfer radical polymerization (ATRP). PBMA macroinitiators that contained alkyl bromide end groups were obtained by the emulsion ATRP of n‐butyl methacrylate with BrCH₃CHCOOC₂H₅ as the initiator; these were used to initiate the ATRP of styrene (St). The latter procedure was carried out at 85°C with CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as the catalyst and polyoxyethylene(23) lauryl ether as the surfactant. With this technique, PBMA‐b‐PSt diblock copolymers were synthesized. The polymerization was nearly controlled; the ATRP of St from the macroinitiators showed linear increases in number‐average molecular weight with conversion. The block copolymers were characterized with IR spectroscopy, ¹H‐NMR, and differential scanning calorimetry. The effects of the molecular weight of the macroinitiators, macroinitiator concentration, catalyst concentration, surfactant concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are also reported. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2123–2129, 2005     

Living/controlled radical autopolymerization of styrene in the presence of CuCl2 and 2,2′‐bipyridine

The bulk autopolymerization of styrene (St) was successfully conducted in the presence of CuCl₂ and 2,2′‐bipyridine (bpy) at 110 and 130°C. We found that this polymerization was a living/controlled radical polymerization at a [St]₀/[CuCl₂]₀/[bpy]₀ ratio of 54:1:2.5. The resulting number‐average molecular weights linearly increased with conversion, and the polydispersity indices were very narrow (<1.5). The polymerization rate increased with temperature. Increasing the ratios (i.e., 129:1:2.5, 259:1:2.5, and 386:1:2.5) led to a decrease in the ability to control the autopolymerization of St, even uncontrolled polymerization (i.e., 643:1:2.5). The analysis of end groups by ¹H‐NMR indicated that the spontaneous generation of radicals from St were generated by a Mayo‐type process, and this living/controlled radical polymerization might have underwent a reverse atom‐transfer radical polymerization process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1532–1538, 2003     

Graft copolymers from commercial chlorinated polypropylene via Cu(0)‐mediated atom transfer radical polymerization

Commercially available chlorinated polypropylene has been used as a macroinitiator for the Cu(0)‐mediated atom transfer radical polymerization of methyl methacrylate and tert‐butyl acrylate to obtain well‐defined graft copolymers. The relatively narrow molecular weight distribution in the graft copolymers and linear kinetic plots indicated the controlled nature of the copolymerization reactions. Both Fourier transform infrared and ¹H NMR studies confirmed that the graft reactions had taken place successfully. After graft copolymer formation, tert‐butyl groups of poly(tert‐butyl acrylate) side chains were completely converted into poly(acrylic acid) chains to afford corresponding amphiphilic graft copolymers. © 2016 Society of Chemical Industry     

High‐molecular‐weight polyacrylonitrile by atom transfer radical polymerization

A single‐pot atom transfer radical polymerization was used for the first time to successfully synthesize polyacrylonitrile with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.18. This was achieved with CuBr/isophthalic acid as the catalyst, 2‐bromopropionitrile as the initiator, and N,N‐dimethylformamide as the solvent. The effects of the solvent on the polymerization of acrylonitrile were also investigated. The induction period was shorter in N,N‐dimethylformamide than in propylene carbonate and toluene, and the rate of the polymerization in N,N‐dimethylformamide was fastest. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. When chlorine was used in either the initiator or the catalyst, the rate of polymerization showed a trend of decreasing, and the molecular weight deviated from the theoretical predication significantly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3372–3376, 2006     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

Towards a one‐pot synthesis of a polystyrene–PMMA block copolymer via atom‐transfer radical polymerization

The solution atom‐transfer radical copolymerization of styrene and methyl methacrylate in butyl acetate at 110 °C in the presence of Cu(II) bromide and 2,2′‐bipyride was investigated. Polystyrene was polymerized by atom‐transfer radical polymerization using benzyl bromide as initiator and MMA was then added to the system. Block copolymers were formed when MMA was added at ≤90% styrene conversion. Molecular weight distributions (M_w/M_n) of the block copolymers were ≤1.5. The possibility of end‐capping the polystyrene precursor as a means of improving its initiating efficiency towards MMA was also investigated but did not improve the system. © 2002 Society of Chemical Industry     

Atom transfer radical polymerization of styrene with 2‐(1‐bromoethyl)‐anthraquinone as an initiator

2‐(1‐Bromoethyl)‐anthraquinone (BEAQ) was successfully used as an initiator in the atom transfer radical polymerization of styrene with CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as the catalyst at 110°C. The polymerizations were well controlled with a linear increase in the molecular weights (M_n's) of the polymers with monomer conversion and relatively low polydispersities (1.1 < weight‐average molecular weight (M_w)/M_n < 1.5) throughout the poly merizations. The resultant polystyrene thus possessed one chromophore moiety (2‐ethyl‐anthraquinone) at the α end and one bromine atom at the ω end, both from the initiator BEAQ. The intensity of UV absorptions of the resultant polymers decreased with increasing molecular weights of the polymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2081–2085, 2006     

Synthesis of diblock and triblock copolymers from butyl acrylate and styrene by reverse iodine transfer polymerization

Well‐defined AB and BA diblock copolymers were obtained by a one‐pot two‐step sequential block copolymerization by reverse iodine transfer polymerization (RITP), A being a poly(styrene) block and B a poly(butyl acrylate) block. High monomer conversions during the formation of the first block avoided the purification steps before growing the second block. In a third sequential step, the diblock copolymers were further extended to synthesize ABA and BAB triblock copolymers. Furthermore, the synthesis of ABA and BAB copolymers in only two steps by RITP was investigated starting with the formation of the central block using 2,5‐di(2‐ethylhexanoylperoxy)‐2,5‐dimethylhexane as a difunctional initiator and then resuming the polymerization to grow the external blocks in a second step. The obtained copolymers were analyzed by size exclusion chromatography, transmission electron microscopy, and differential scanning calorimetry. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of novel polystyrene‐block‐polyurethane‐block‐polystyrene tri‐block copolymers through atom transfer radical polymerization

Background: Radical polymerization is used widely to polymerize more than 70% of vinyl monomers in industry, but the control over molecular weight and end group of the resulting polymers is always a challenging task with this method. To prepare polymers with desired molecular weight and end groups, many controlled radical polymerization (CRP) ideas have been proposed over the last decade. Atom transfer radical polymerization (ATRP) is one of the successful CRP techniques. Using ATRP, there is no report on the synthesis of polystyrene‐block‐polyurethane‐block‐polystyrene (PSt‐b‐PU‐b‐PSt) tri‐block copolymers. Hence this paper describes the method of synthesizing these tri‐block copolymers. To accomplish this, first telechelic bromo‐terminated polyurethane was synthesized and used further to synthesize PSt‐b‐PU‐b‐PSt tri‐block copolymers using CuBr as a catalyst and N,N,N,N″,N″‐pentamethyldiethylenetriamine as a complexing agent. Results: The ‘living’ nature of the initiating system was confirmed by linear increase of number‐average molecular weight and conversion with time. A semi‐logarithmic kinetics plot shows that the concentration of propagating radical is steady. The results from nuclear magnetic resonance spectroscopy, gel permeation chromatography and differential scanning calorimetry show that the novel PSt‐b‐PU‐b‐PSt tri‐block copolymers were formed through the ATRP mechanism. Conclusion: For the first time, PSt‐b‐PU‐b‐PSt tri‐block copolymers were synthesized through ATRP. The advantage of this method is that the controlled incorporation of polystyrene block in polyurethane can be achieved by simply changing the polymerization time. Copyright © 2007 Society of Chemical Industry     

Reverse atom transfer radical polymerization of stearyl methacrylate using 2,2′‐azobisisobutyronitrile as the initiator

The living/controlled radical polymerization of stearyl methacrylate was carried out with a conventional radical initiator (2,2′‐azobisisobutyronitrile) in N,N‐dimethylformamide in the presence of a 2,2′‐bipyridine complex of hexakis(N,N‐dimethylformamide)iron(III) perchlorate. The polymerization mechanism was thought to proceed through a reverse atom transfer radical polymerization. The molecular weights of resulting poly(stearyl methacrylate) increased with conversion, and the resulting molecular weight distributions were quite narrow. The rates of polymerization exhibited first‐order kinetics with respect to the monomer. A probable reaction mechanism for the polymerization system is postulated to explain the observed results. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1236–1245, 2002     

Self‐condensing atom transfer radical polymerization of inimers of different reactivity ratios with styrene and the thermal properties of poly(2,6‐dimethyl‐1, 4‐phenylene oxide)/branched polystyrene blends

Although the self‐condensing atom transfer radical polymerization (SCATRP) of inimers with typical comonomers has been extensively performed, there have been few reports to correlate the reactivity ratio with the growth of the molecular weights (MWs) and the development of branched structures. Thus, the SCATRP of inimers of different reactivity ratios, namely, 4‐chloromethylstyrene (CMS) and maleimide (MI) inimers, with a large excess of styrene (St) were carried out, respectively, to examine the effect. The conversion and MW were monitored by gas chromatography, gel permeation chromatography, and multiangle laser light scattering. The results suggested that CMS merely functioned as an initiator for St at the early stage; this led to linear macroinimers, which underwent SCATRP and gave rise to randomly branched polystyrene (PS) only at high conversion. The MI inimers formed charge‐transfer complexes with St and underwent the SCATRP to result in hyperbranched copolymers at first; this initiated the atom transfer radical polymerization of St and led to star‐shaped PS. With the objective of improving the processability and melt fluidity, the physical properties of poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) blends with linear, randomly branched, and star‐shaped PS were compared. In comparison with those with linear PS, the PPO/branched PS blends exhibited a higher glass‐transition temperature, a higher melt flow index, and a comparable thermal stability because of the spherical architecture of the branched PS. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Graft copolymerization of methyl methacrylate with an N‐substituted maleimide–liquid‐crystalline copolymer by atom transfer radical polymerization

The synthesis of novel copolymers consisting of a side‐group liquid‐crystalline backbone and poly (methyl methacrylate) grafts were realized by the use of atom transfer radical polymerization (ATRP). In the first stage, the bromine‐functional copolymers 6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate and (2,5‐dioxo‐2,5‐dihydro‐1H‐pyrrole‐1‐yl)methyl 2‐bromopropanoate were synthesized by free‐radical polymerization. These copolymers were used as initiators in the ATRP of methyl methacrylate to yield graft copolymers. Both the macroinitiator and graft copolymers were characterized by ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. The ATRP graft copolymerization was supported by an increase in the molecular weight of the graft copolymers compared to that of the macroinitiator and also by their monomodal molecular weight distribution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Novel poly(methyl methacrylate)‐block‐polyurethane‐block‐poly(methyl methacrylate) tri‐block copolymers through atom transfer radical polymerization

Poly(methyl methacrylate)‐block‐polyurethane‐block‐poly(methyl methacrylate) tri‐block copolymers have been synthesized successfully through atom transfer radical polymerization of methyl methacrylate using telechelic bromo‐terminated polyurethane/CuBr/N,N,N,N″,N″‐pentamethyldiethylenetriamine initiating system. As the time increases, the number‐average molecular weight increases linearly from 6400 to 37,000. This shows that the poly methyl methacrylate blocks were attached to polyurethane block. As the polymerization time increases, both conversion and molecular weight increased and the molecular weight increases linearly with increasing conversion. These results indicate that the formation of the tri‐block copolymers was through atom transfer radical polymerization mechanism. Proton nuclear magnetic resonance spectral results of the triblock copolymers show that the molar ratio between polyurethane and poly (methyl methacrylate) blocks is in the range of 1 : 16.3 to 1 : 449.4. Differential scanning calorimetry results show T_g of the soft segment at ?35°C and T_g of the hard segment at 75°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effects of the solvent polarity on the atom transfer radical polymerization of methyl methacrylate initiated by 4‐(chloromethyl)phenyltrimethoxysilane

The controllability of the atom transfer radical polymerization of methyl methacrylate in the polar solvent N,N‐dimethylformamide and the nonpolar solvent xylene with 4‐(chloromethyl)phenyltrimethoxysilane as an initiator and with CuCl/2,2′‐bipyridine and CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as catalyst systems was studied. Gel permeation chromatography analysis established that in the nonpolar solvent xylene, much better control of the molecular weight and polydispersity of poly(methyl methacrylate) was achieved with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system than with the CuCl/2,2′‐bipyridine as catalyst system. In the polar solvent N,N‐dimethylformamide, unlike in xylene, the polymerization was more controllable with the CuCl/2,2′‐bipyridine catalyst system than with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2751–2754, 2007     

原子转移自由基聚合机理及其应用

原子转移自由基聚合(ATRP)是目前研究的热点之一。该文介绍了ATRP的反应机理及其应用。     

New fluorous bipyridine ligands for copper‐catalyzed atom transfer radical polymerization of methyl methacrylate in the thermomorphic mode

The atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) is often carried out under homogeneous conditions, so the residual metal catalyst in the polymer often influences the quality of the polymer and causes environmental pollution in the long run. Novel CuBr/4,4′‐bis(R_fCH₂OCH₂)‐2,2′‐bpy complexes (R_f = n‐C₉F₁₉, n‐C₁₀F₂₁, or n‐C₁₁F₂₃; 2,2′‐bpy = 2,2′‐bipyridine) are insoluble in toluene at room temperature yet readily dissolve in toluene at elevated temperatures to form homogeneous phases for use as catalysts in the ATRP reaction, and the Cu complexes precipitate again upon cooling. The CuBr/4,4′‐bis(n‐C₉F₁₉CH₂OCH₂)‐2,2′‐bpy system produced the best results (e.g., polydispersity index by gel permeation chromatography = 1.26–1.41), in that the residual Cu content in the polymer was as low as 19.3 ppm when the ATRP of MMA was carried out in the thermomorphic mode. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008