Novel flame‐retardant epoxy based on zinc methylethyl phosphinate

A novel flame retardant zinc methylethylphosphinate (Zn(MEP)) was used to fill epoxy resins (EPs). The structure of Zn(MEP) was conformed with Fourier transform infrared, hydrogen nuclear magnetic resonance and phosphorus nuclear magnetic resonance, and X‐ray fluorescent and X‐ray diffraction. The flammability, decomposition behavior, and glass transition temperature (T_g) of cured EP/Zn(MEP) were investigated. Zn(MEP) is stable below 406°C. EP containing 20 phr of Zn(MEP) achieves 27.5% of limiting oxygen index and UL‐94 V0 rating. Scanning electron microscopy‐energy‐dispersive X‐ray and Fourier transform infrared spectroscopy investigations show that a condensed char layer with carbon‐rich and phosphorus‐rich components was formed during heating Zn(MEP)/EP, the atomic ratio of P to Zn on the surface of the char is reduced compared with the initial sample. The P‐rich components and lower atomic ratio of P/Zn on the char surface implies that the Zn(MEP) acts in both condensed phase and gas phase. TGA investigation shows that there are interactions between Zn(MEP) and EP when they are copyrolyzed. The interactions lead to a modification in degradation process and promote the char forming. Compared with aluminum diethylphosphinate Zn(MEP) filled EP shows lower limiting oxygen index but higher T_g. In addition, the interactions between polymer and additive are different when aluminum diethylphosphinate instead of Zn(MEP) is added into EP. Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation of a chitosan‐based flame‐retardant synergist and its application in flame‐retardant polypropylene

A novel flame‐retardant synergist, chitosan/urea compound based phosphonic acid melamine salt (HUMCS), was synthesized and characterized by Fourier transform infrared spectroscopy and ³¹P‐NMR. Subsequently, HUMCS was added to a fire‐retardant polypropylene (PP) compound containing an intumescent flame‐retardant (IFR) system to improve its flame‐retardant properties. The PP/IFR/HUMCS composites were characterized by limiting oxygen index (LOI) tests, vertical burning tests (UL‐94 tests), microscale combustion calorimetry tests, and thermogravimetric analysis to study the combustion behavior and thermal stability. The addition of 3 wt % HUMCS increased the LOI from 31.4 to 33.0. The addition of HUMCS at a low additive amount reduced the peak heat‐release rate, total heat release, and heat‐release capacity obviously. Furthermore, scanning electron micrographs of char residues revealed that HUMCS could prevent the IFR–PP composites from forming a dense and compact multicell char, which could effectively protect the substrate material from combusting. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40845.     

A novel intumescent flame‐retardant system for flame‐retarded LLDPE/EVA composites

A new intumescent flame retardant (IFR) system consisting of ammonium polyphosphate (APP) and charing‐foaming agent (CFA) and a little organic montmorillonite (OMMT) was used in low‐density polyethylene (LLDPE)/ethylene‐vinyl acetate (EVA) composite. According to limiting oxygen index (LOI) value and UL‐94 rating obtained from this work, the reasonable mass ratio of APP to CFA was 3 : 1, and OMMT could obviously enhance the flame retardancy of the composites. Cone calorimeter (CONE) and thermogravimetric analysis (TGA) were applied to evaluate the burning behavior and thermal stability of IFR‐LLDPE/EVA (LLDPE/EVA) composites. The results of cone calorimeter showed that heat release rate peak (HRR‐peak) and smoke production rate peak (SPR‐peak) and time to ignition (TTI) of IFR‐LLDPE/EVA composites decreased clearly compared with the pure blend. TGA data showed that IFR could enhance the thermal stability of the composites at high temperature and effectively increase the char residue. The morphological structures of the composites observed by scanning electron microscopy (SEM) and X‐ray diffraction (XRD) demonstrated that OMMT could well disperse in the composites without exfoliation, and obviously improve the compatibility of components of IFR in LLDPE/EVA blend. The morphological structures of char layer obtained from Cone indicated that OMMT make the char layer structure be more homogenous and more stable. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and properties of novel 4,4′‐biphenylene‐bridged flame‐retardant cyanate ester resin

The bisphenol‐containing 4,4′‐biphenylene moiety was prepared by the reaction of 4,4′‐bis(methoxymethyl) biphenyl with phenol in the presence of p‐toluenesulfonic acid. The bisphenol was end‐capped with the cyanate moiety by reacting with cyanogen chloride and triethylamine in dichloromethane. Their structures were confirmed by Fourier transform infrared spectroscopy, ¹H‐NMR, and elemental analysis. Thermal behaviors of cured resin were studied by differential scanning calorimetry, dynamic mechanical analysis, and TGA. The flame retardancy of cured resin was evaluated by limiting oxygen index (LOI) and vertical burning test (UL‐94 test). Because of the incorporation of rigid 4,4′‐biphenylene moiety, the cyanate ester (CE) resin shows good thermal stability (T_g is 256°C, the 5% degradation temperature is 442°C, and char yield at 800°C is 64.4%). The LOI value of the CE resin is 42.5, and the UL‐94 rating reaches V‐0. Moreover, the CE resin shows excellent dielectric property (dielectric constant, 2.94 at 1 GHz and loss dissipation factor, 0.0037 at 1 GHz) and water resistance (1.08% immersed at boiling water for 100 h). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Study on flame‐retardancy and thermal degradation behaviors of intumescent flame‐retardant polylactide systems

Two intumescent flame‐retardant (IFR) additives, IFR‐I and IFR‐II, were synthesized and their structure was confirmed by Fourier transform infrared spectroscopy and nuclear magnetic resonance. Polylactide (PLA) was modified by the two IFRs to obtain flame‐retardant composites. The flammability of the PLA/IFR composites was characterized by the vertical burning test UL‐94 and limiting oxygen index. The limiting oxygen index values of the PLA composites increased with increase of IFR content. The PLA composite with 20 wt% IFR‐I could pass the UL‐94 V0 rating, while the composite with 30 wt% IFR‐II could not. The results of pyrolysis combustion flow calorimetry showed that the heat release capacity of PLA composites with 30 wt% IFR‐I decreased 43.1% compared with that of pure PLA. The thermal degradation and gas products of PLA/IFR‐I systems were monitored by thermogravimetric analysis and thermogravimetric analysis infrared spectrometry. Scanning electron microscopy was used to investigate the surface morphology of the char residue. Copyright © 2011 Society of Chemical Industry     

The flame‐retardant effect of calcium hypophosphite in various thermoplastic polymers

The flame‐retardant behavior of calcium hypophosphite (CaHP) was investigated in different thermoplastic polymers including polyamide 6 (PA), poly (lactic acid) (PLA), thermoplastic polyurethane (TPU), and poly methyl metacrylate (PMMA). CaHP was used at three different amounts of 10, 20, and 30 wt%. The characterization of the composites was performed using limiting oxygen index (LOI), vertical burning test (UL 94), thermogravimetric analysis (TGA), and mass loss calorimeter test. According to the test results, CaHP enhances the fire‐retardant properties in different levels depending on the polymer type. The CaHP exhibits its flame‐retardant effect via the formation of foamed char structure in the condensed phase and via the dilution and radical scavenging effect in the gas phase.     

Microencapsulation of intumescent flame‐retardant agent: Application to flame‐retardant natural rubber composite

The first part of this investigation focused on the synthesis and characterization of a microencapsulated intumescent flame retardant (MIFR) agent. Two steps were used in the synthesis process. The structure was characterized by scanning electron microscopy, thermogravimetric anaylysis, and Fourier transform infrared spectroscopy. The addition of this MIFR agent into natural rubber (NR) led to an improvement in its physicomechanical and flame‐retardant (FR) properties. The second part focused on the evaluation of such characteristics as cure characteristics, FR property, tensile properties, abrasion resistance, and dynamic mechanical analysis of MIFR filled NR composites. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1828–1838, 2007     

Phosphazene cyclomatrix network polymers: Some aspects of the synthesis,characterization, and flame‐retardant mechanisms of polymer

Novel phosphazene cyclomatrix network polymers were synthesized via nucleophilic displacement of activated nitro groups of tri(4‐nitrophenoxy)tri(phenoxy)cyclotriphosphazene and hexa(p‐nitrophenoxy)cyclotriphosphazene with the hydroxyls of bisphenol A. Both the monomers and polymers were characterized by Fourier transform infrared (FTIR) and ¹H‐NMR spectroscopy, and their structures were identified. The thermal and flame‐retardant properties of the polymers were investigated with thermogravimetric analysis in air, pyrolysis, and combustion experiments. Both solid and gaseous degradation products were collected in a pyrolysis process and analyzed with FTIR spectroscopy, gas chromatography/mass spectrometry, and scanning electron microscopy. The results demonstrated that the cyclomatrix phosphazene polymer would have excellent thermal stability and flame‐retardant properties if it could form a crosslinked phosphorous oxynitride structure during pyrolysis or combustion. A flame‐retardant mechanism of “intumescent” was proposed to elucidate the pyrolysis and combustion process. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 880–889, 2005     

Eco-friendly flame retardant epoxy nanocomposites based on polyphosphonate and halloysite nanotubes

The preparation of a novel polyphosphonate (PSFR) is described here, starting from phenylphosphonic dichloride and an equimolecular mixture containing equal amounts of two bisphenols, namely 4,4′-dihydroxydiphenyl sulfone and 2-(6-oxido-6H-dibenzo<c,e><1,2>oxaphosphorin-6-yl)-1,4-benzenediol, following the polycondensation reaction in solution. Then, new environmental-friendly nanocomposites having improved flame retardancy have been prepared by incorporating PSFR and halloysite nanotubes (HNTs) into epoxy resin. The effect of PSFR and HNTs contents on the chemical and physical characteristics of epoxy nanocomposites was investigated. The success of the reactions was monitored by infrared spectroscopy (FTIR) while microscopic related techniques (SEM) gave information on the morphology of the products. The thermosets exhibit glass transition temperatures in the range of 62.4–97.1°C and thermal decomposition temperatures in the interval of 296–359°C. The appearance of the char residues obtained by pyrolysis was studied by SEM measurements. The flammability behavior has been studied by microscale combustion calorimetry (MCC) tests. A considerable improvement in the flame retardancy of the thermosets was obtained by simultaneous incorporation of HNTs (10 wt%) and PSFR (equivalent of 1 wt% P) into epoxy resin.     

Synergistic flame‐retardant effect of halloysite nanotubes on intumescent flame retardant in LDPE

Synergistic flame‐retardant effect of halloysite nanotubes (HNTs) on an intumescent flame retardant (IFR) in low‐density polyethylene (LDPE) was investigated by limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis (TGA), cone calorimeter (CC) test, and scanning electronic microscopy (SEM). The results of LOI and UL‐94 tests indicated that the addition of HNTs could dramatically increase the LOI value of LDPE/IFR in the case that the mass ratio of HNTs to IFR was 2/28 at 30 wt % of total flame retardant. Moreover, in this case the prepared samples could pass the V‐0 rating in UL‐94 tests. CC tests results showed that, for LDPE/IFR, both the heat release rate and the total heat release significantly decreased because of the incorporation of 2 wt % of HNTs. SEM observations directly approved that HNTs could promote the formation of more continuous and compact intumescent char layer in LDPE/IFR. TGA results demonstrated that the residue of LDPE/IFR containing 2 wt % of HNTs was obviously more than that of LDPE/IFR at the same total flame retardant of 30 wt % at 700°C under an air atmosphere, and its maximum decomposing rate was also lower than that of LDPE/IFR, suggesting that HNTs facilitated the charring of LDPE/IFR and its thermal stability at high temperature in this case. Both TGA and SEM results interpreted the mechanism on the synergistic effect of HNTs on IFR in LDPE, which is that the migration of HNTs to the surface during the combustion process led to the formation of a more compact barrier, resulting in the promotion of flame retardancy of LDPE/IFR. In addition, the mechanical properties of LDPE/IFR/HNTs systems were studied, the results showed that the addition of 0.5–2 wt % of HNTs could increase the tensile strength and the elongation at break of LDPE/IFR simultaneously. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40065.     

Effects of flame‐retardant flax‐fiber on enhancing performance of the rigid polyurethane foams

The original flax fibers (FF) and the modified FFs were subjected to the treatment with the flame retardant, were used to improve the performance of rigid polyurethane foams (RPUF). The mechanical properties of composites were evaluated by compressive strength test, torsion strength test, and shear stress test. The fire characteristics (smoke and heat production) were studied using cone calorimeter. And the thermal decomposition and flammable properties were further evaluated using thermogravimetric analysis and limiting oxygen index. The results showed that the FF could improve the mechanical properties of RPUF and had a good prospect in reducing the fire hazard for RPUF. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46436.     

Expandable graphite systems for halogen‐free flame‐retarding of polyolefins. II. Structures of intumescent char and flame‐retardant mechanism

The structures of the intumescent charred layers formed from polyolefin (PO) blends with expandable graphite (EG) and/or the other free‐halogen flame retardant (HFFR) and their flame‐retardant mechanism were studied by Fourier transform infrared (FTIR) spectroscopy, X‐ray photoelectron spectroscopy (XPS), laser Raman spectroscopy (LRS), scanning electron microscopy (SEM), differential thermal analysis (DTA), and thermal conductivity (TC) measurements. The FTIR, XPS, and LRS data showed that the carbonaceous structures of intumescent charred layers consist of EG and various numbers of condensed benzene rings and/or phosphocarbonaceous complexes attached by the P—O—C and P—N bonds or quaternary nitrogen or dehydrated zinc borate (ZB). These results and the morphologic structures observed by SEM have demonstrated that the compact structures of charred layers slow down heat and mass transfer between the gas and condensed phase and prevent the underlying polymeric substrate from further attack by heat flux in a flame. The DTA data provide the positive evidence for the flame‐retardant mechanism of the PO/EG/HFFR systems, which works by increasing the oxidation temperature and decreasing thermal oxidation heat. At the same time, the TC data reveal the flame‐retardant essence of the charred layers as good heat‐insulated materials whose TC value is only about 1/10 of the corresponding blend. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1190–1197, 2001     

Effect of expandable graphite on the properties of intumescent flame‐retardant polyurethane foam

Water‐blown rigid polyurethane foam (PUF) with two different particle sizes (180 and 300 μm) of expandable graphite (EG) as a flame‐retardant additive were prepared, and the effects on the mechanical, morphological, water absorption, thermal conductivity, thermal, and flame‐retardant properties were studied. In this investigation, EG content was varied from 5 to 50 php by weight. The mechanical properties of PUF decreased with increasing EG loading in both cases. The water absorption of the PUF increased with an increase in the EG loading mainly because of the collapse of foam cells, as evidenced from the scanning electron microscopy pictures. The thermal conductivity of the EG‐filled PUF showed that the insulation properties decreased with EG loading. The flame‐retardant properties (limiting oxygen index and char yield measurement) of the PUF improved with increasing EG loading. PUF filled with the higher particle size EG showed better mechanical properties and fire‐retardant properties than the PUF filled with the lower particle size EG. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Study on the performance of flame‐retardant esterified starch‐modified cassava dregs‐PBS composites

Esterified starch was used as an interfacial modifier to treat the surface of cassava dregs. The treated fiber was used to prepare flame‐retardant poly(butylene succinate) (PBS)/cassava dregs fiber composites with the incorporation of intumescent flame retardants (IFR). The mechanical performance and flame‐retardant properties of composites were investigated. Experimental data showed that an appropriate cassava fiber loading favored the mechanical performance of composites. When the total filler content was 30 wt % [m(cassava dregs):m(IFR) = 1:5], in comparison with those of composite prepared by 30 wt % IFR, the tensile and impact strengths of composite increased by 40 ± 7 and 62 ± 8%, respectively. Besides, the limited oxygen index value of 37.3% and UL‐94 V0 rate of composite could be achieved. Possible flame retardant mechanism was proposed. The combusted residue of incorporated cassava dregs could play a support effect in the three‐dimensional charred layer formed by the combustion products of IFR and PBS. The three‐dimensional intumescent charred layer, and the formation of incombustible gas, such as NH3, play an important role in insulation, oxygen barrier, thereby effectively improving the flame retardancy and thermal stability of composites. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46210.     

Synthesis and characterization of water‐dispersed flame‐retardant polyurethane resin using phosphorus‐containing chain extender

In this research, a flame‐retardant water‐dispersed polyurethane resin was synthesized through incorporating phosphonate groups into the polyurethane structure in the chain‐extension step. A phosphorus‐containing reactive flame‐retardant compound was synthesized for this purpose. First, bis(4‐nitrophenyl)phenyl phosphine oxide was synthesized and then converted to bis(4‐amino phenyl)phenyl phosphine oxide (BAPPO) by reducing its nitro groups into amines. The obtained products were characterized by IR, ¹H‐NMR, and ³¹P‐NMR, and the thermal properties of the polymers were determined by DSC analysis. The BAPPO‐containing polyurethane showed physical properties that were almost similar to those of phosphorus‐free polyurethane and exhibited good flame resistance with a limiting oxygen index value of 27. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1314–1321, 2004     

Thermal degradation and combustion behavior of intumescent flame‐retardant polypropylene with novel phosphorus‐based flame retardants

The objective of this study was to develop an environmentally friendly fire‐retardant polypropylene (PP) with significantly improved fire‐retardancy performance with a novel flame‐retardant (FR) system. The system was composed of ammonium polyphosphate (APP), melamine (MEL), and novel phosphorus‐based FRs. Because of the synergistic FR effects among the three FRs, the FR PP composites achieved a V‐0 classification, and the limiting oxygen index reached as high as 36.5%. In the cone calorimeter test, both the peak heat‐release rate (pHRR) and total heat release (THR) of the FR PP composites were remarkably reduced by the incorporation of the novel FR system. The FR mechanism of the MEL–APP–FR–PP composites was investigated through thermogravimetric analysis and char residue characterization, and the results reveal that the addition of MEL–APP–FRs promoted the formation of stable intumescent char layers. This led to the reduction of pHRR and THR and resulted in the improvement of the fire retardancy. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45962.     

Effect of nano‐titanium nitride on thermal insulating and flame‐retardant performances of phenolic foam

In this work, titanium nitride (TiN) nanoparticles were employed to achieve enhanced thermal insulation and flame retardance of phenolic foam (PF)/TiN nanocomposites (PFTNs) via in situ polymerization. The morphologies of PFTNs were observed by scanning electron microscope and the images showed that the PFTNs have more uniform cell morphologies compared with pure PF. Thermal insulating properties of PFTNs were evaluated by thermal conductivity tests. The introduction of TiN obviously decreased the thermal conductivities of PF over a wide temperature range (?20 to 60 °C). Significantly, the thermal conductivity of PFTNs gradually decreased as the temperature increased from 30 to 60 °C, showing a contrary tendency with that of pure PF. Moreover, the thermal stability and flame‐retardant properties of PFTNs were estimated by thermogravimetric analysis (TGA), UL‐94 vertical burning and limited oxygen index (LOI) tests, respectively. The TGA and LOI results indicated that PFTNs possess enhanced thermal stabilities and fire‐retardant performances with respect to the virgin PF. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43765.     

Highly flame‐retardant polyurethane foam based on reactive phosphorus polyol and limonene‐based polyol

Polyurethane foams are in general flammable and their flammability can be controlled by adding flame‐retardant (FR) materials. Reactive FR have the advantage of making strong bond within the polyurethane chains to provide excellent FR over time without compromising physico‐mechanical properties. Here, phenyl phosphonic acid and propylene oxide‐based reactive FR polyol was synthesized and used along with limonene based polyol for preparation of FR polyurethanes. All the obtained foams showed higher closed cell content (above 96%). By the addition of FR–polyol, the compressive strength of the foams showed 160% increment which could be due to reactive nature of FR–polyol. Moreover, 1.5 wt % of phosphorus (P) content reduced the self‐extinguishing time of the foam from 81 (28% weight loss) to 11.2 s (weight loss of 9.8%). Cone test showed 68.6% reduction in peak heat release rate along with 23.4% reduction in thermal heat release. The change in char structure of carbon after burning was analyzed using Raman spectra which, suggests increment in the graphitic phase of the carbon over increased concentration of phosphorus. It can be concluded from this study that phosphorous based polyol could be blended with bio‐based polyols to prepare highly FR and superior physico‐mechanical rigid polyurethane foams. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46224.     

Intumescent char structures and flame‐retardant mechanism of expandable graphite‐based halogen‐free flame‐retardant linear low density polyethylene blends

The structures of the intumescent charred layers formed from expandable graphite (EG)‐based intumescent halogen‐free flame retardant (HFFR) linear low‐density polyethylene (LLDPE) blends and their flame‐retardant mechanism in the condensed phase have been studied by dynamic Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), laser Raman spectroscopy (LRS), scanning electron microscopy (SEM), differential thermal analysis (DTA) and thermal conductivity (TC) measurements. The dynamic FTIR, XPS and LRS data show that the carbonaceous structures of intumescent charred layers consist of EG and various numbers of condensed benzene rings and/or phosphocarbonaceous complexes attached by the P? O? C and P? N bonds or quaternary nitrogen products. The addition of EG can hasten the formation of these phosphocarbonaceous structures. The above results show that the flame‐retardant mechanism in the condensed phase is that the compact char structures, as observed by SEM, slow down heat and mass transfer between the gas and condensed phase and prevent the underlying polymeric substrate from further attack by heat flux in a flame. The DTA and TC data show that carbonaceous charred layers are good heat‐insulating materials, the TC value of which is only about one‐tenth of that of the corresponding blend and that they increase the oxidization temperature and decrease thermal oxidization heat of the LLDPE/EG/HFFR systems. © 2003 Society of Chemical Industry     

Durable flame‐retardant finished cotton fabrics characterized by thermal degradation behaviors

After a series of investigations on the durable flame‐retardant finishes, it was thought to be important to study these durable flame‐retardant finished materials from the thermal analytical standpoint. Accordingly, cotton fabric was finished with N‐methylol dialkyl phosphonopropionamide (Pyrovatex C) by thermofixation and tetrakis (hydroxymethyl) phosphonium sulfate (THPS) precondensate by ammonia cure (Proban), as well as with THPS monomer by heat cure under various conditions, and subjected to the thermogravimetry (TG) to observe thermal degradation behaviors and obtain apparent activation energy (E_a). TG curves of Proban‐finished samples showed the largest shift to lower temperatures with a steep slope; thermofixed THPS‐finished sample gave a smaller shift with similar steep slope, whereas Pyrovatex‐finished samples exhibited a similar shift but with a gradual slope. E_a versus residual ratio curves led us to conclude that C N bond‐rich Proban polymer requires the highest E_a and decomposes with considerable rapidity, whereas ethylene‐bond‐rich Pyrovatex‐finished samples with melamine crosslinking decompose gradually with the lowest E_a. As for the relationship between flame retardance and E_a distribution in the process of thermal degradation, typical differences among the above three kinds of finished samples were found, which are compared and discussed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 975–987, 1999