Superabsorbent resin of acrylic acid/ammonium acrylate copolymers synthesized by ultraviolet photopolymerization

A new method of synthesizing a superabsorbent resin (SAR) from an acrylic acid/ammonium acrylate copolymer by direct UV photopolymerization was studied. The effects of the degree of neutralization of acrylic acid, the photoinitiators, the crosslinking agents, and the UV‐light exposure time on the water absorbency (Q) were investigated. The results showed that Q of an SAR based on Irgacure 1700 or Irgacure 1800 and Irgacure 651 was high, reaching about 1200 mL/g, but under the same conditions, Q was low for an SAR based on other photoinitiators. The UV absorption spectrum proved that the photoinitiators matched the UV light source. Among the crosslinking agents, N,N′‐methylene bisacrylamide was more efficient than the others at a small concentration and a high value of Q. ¹³C‐NMR spectrometry was used to identify the mechanism of the crosslinking reaction through the esterification of hydroxyethyl acrylate (HEA) and 2‐hydroxypropyl acrylate with carboxylic acid group in acrylic acid/ammonium acrylate copolymerization, but the efficiency of the crosslinking reaction by esterification was lower than that of the copolymerization of vinyl groups in the crosslinking agent. Q of the acrylic acid/ammonium acrylate copolymer for the SAR reached 1255 mL/g under certain conditions (degree of neutralization of acrylic acid = 75%, Irgacure 651 concentration = 0.2 wt %, [HEA] = 0.2 wt %, exposure time = 10 min). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 546–555, 2005     

Superabsorbent hydrogel of acrylic acid/potassium acrylate copolymers by ultraviolet photopolymerization: Synthesis and properties

Synthesis of superabsorbent hydrogel (SAHG) of acrylic acid‐potassium acrylate copolymer by direct Ultraviolet (UV) photopolymerization is a new method. The effects of degree of neutralization of acrylic acid (AA), photoinitiators, crosslinking agents, and exposure time of UV light on water absorbent properties were investigated. The results showed that the water absorbency (Q) and the salt solution (NaCl, 0.9%) absorbency (Qs) of SAHG, based on Irgacure 651, are high, reaching about 1400 and 130 mL/g, respectively. UV absorption spectrum proved that peak of UV absorption of Irgacure 651 matched the UV light source we used. Among the crosslinking agents, N,N′‐methylene bisacrylamide is more efficient than others, because of its very small content and high Q. ¹³C NMR spectrometry was used to identify the mechanism of crosslinking reaction through esterification of hydroxyethyl acrylate (HEA) and 2‐hydroxypropyl acrylate (HPA) with carboxylic acid group in acrylic acid‐ammonium acrylate copolymerization, but efficiency of crosslinking reaction by esterification was lower than that of copolymerization of vinyl group in crosslinking agent. The Q of acrylic acid‐potassium acrylate copolymer of SAHG reaches 1592 mL/g under the following conditions: degree of neutralization of acrylic acid is 80%, content of Irgacure 651 is 0.25 wt %, content of HEA is 0.2 wt %, and exposure time is 10 min. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1181–1187, 2006     

Kinetic study on the UV‐induced photopolymerization of epoxy acrylate/TiO2 nanocomposites by FTIR spectroscopy

The kinetics of the photopolymerization of epoxy acrylate/TiO₂ nanocomposites, with 2′2‐dimethoxy‐1,2‐diphenylethan‐1‐one (Irgacure 651) or benzophenone/N‐methyl diethanolamine as photoinitiators, were studied by FTIR spectroscopy. It was found that nanocomposites had a decreasing photopolymerization rates in comparison with pure epoxy acrylate. The photopolymerization rate of the nanocomposite could also be influenced by initiator types, oxygen, film thickness, irradiation intensity, dispersing media of TiO₂ slurry, and so forth. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3281–3287, 2006     

pH‐response superabsorbant hydrogel synthesized by ultraviolet photopolymerization

A new synthesis method of pH‐response superabsorbent hydrogels (SHG) was achieved by direct ultraviolet (UV) photopolymerization, and in particular, the synthesis of SHGs of acrylic acid (AA), sodium acrylate (AANa), and methacrylcholine chloride (MACC) tricomponent copolymer by UV photopolymerization were investigated. The pH value responsive behavior of SHG with different monomer ratios of MACC and AA was researched, and SHG showed large swelling properties at pH value approximately 7. Influences of monomer ratio (mol) of AANa to AA, photoinitiators, crosslinking agents, and exposure time of UV light on the water absorbent properties were studied. The results showed that the water absorbent capacity of SHG based on photoinitiators: Esacure KTO46 or Irgacure 651 can reach comparatively high, N,N′‐Methylene bisacrylamide and diethylene glycol diacrylate (DEGDA) were high efficient crosslinking agents for its crosslinking the molecular chains through attending the copolymerization with monomers. When the exposure time was 10 min, the distilled water absorbency of SHG was 1503 mL/g under the condition: content of MACC, 14.3 wt %; monomer ratio (mol) of AANa to AA: 5.67; content of DEGDA and Irgacure 651, 0.0025 and 0.25 wt %. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1847–1852, 2007     

Preparation,mechanical properties of waterborne polyurethane and crosslinked polyurethane‐acrylate composite

The waterborne polyurethane (PU) prepolymer was first prepared based on isophorone diisocyanate, polyether polyol (NJ‐210), dimethylol propionic acid (DMPA), and hydroxyethyl methyl acrylate via in situ method. The crosslinked waterborne polyurethane‐acrylate (PUA) dispersions were prepared with the different functional crosslinkers. The chemical structures, optical transparency, and thermal properties of PU and PUA were confirmed by Fourier transform infrared spectrometry, ultraviolet–visible spectrophotometry, and differential scanning calorimetry. Some physical properties of the aqueous dispersions such as viscosity, particle size, and surface tension were measured. Some mechanical performances and solvent resistance of PUA films were systemically investigated. The experimental results showed that the particle sizes of the crosslinked PUA aqueous dispersions were larger than the PU and increased from 57.3 to 254.4 nm. When the ratios of BA/St, BA/TPGDA, and BA/TMPTA were 70/30, PUA films exhibited excellent comprehensive mechanical properties. The tensile strength and elongation at break of the film were 2.17 MPa and 197.19%. When the ratio of BA/St was 30/70, the film had excellent water resistance and was only 6.47%. The obtained PUA composites have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings, and wood finishes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Chain‐extended polyurethane–acrylate ionomer for UV‐curable waterborne coatings

Conventional and chain‐extended UV‐curable waterborne polyurethane–acrylate (PUA) ionomers were prepared from diisocyanate, polyethylene glycol (PEG), dimethylolpropionic acid, and hydroxyethyl methacrylate, and identified with FTIR spectra and 500‐MHz ¹H‐NMR spectra. The number‐average molecular weight (M_n) and polydispersity of chain‐extended PUA were determined by gel permeation chromatography. For the synthesis of chain‐extended PUA, water was employed as the chain extender. The two kinds of PUA prepolymer could be easily dispersed in water in the form of self‐emulsified latex after the carboxyl group attaching to the backbone of PUA was neutralized with tertiary amine. The effects of M_n of PEG, carboxyl content, and type of diisocyanate on the interfacial tension and rheological behavior of PUA dispersions were investigated. The chain‐extended PUA prepolymer could photopolymerize to a greater extent than the conventional PUA, as indicated by differential photocalorimetry. The photopolymerization kinetics of chain‐extended PUA, based on different substrates, were also investigated. The differential scanning calorimetry analysis for the photo‐cured films from PUA dispersions suggested that lower M_n of PEG tended to favor phase mixing between soft and hard segment phases, and higher M_n of PEG would provoke phase separation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1818–1831, 2002; DOI 10.1002/app.10384     

Structural effect of photoinitiators on electro‐optical properties of polymer‐dispersed liquid crystal composite films

Two types of photoinitiators were synthesized: (1) a α,ω‐telechelic oligomeric photoinitiator, by the reaction of poly(propylene glycol) diglycidylether (PPGDGE) and 2‐hydroxy‐2‐methyl‐1‐phenyl‐propan‐1‐one (Darocur 1173), and (2) a polymeric photoinitiator, by copolymerization of a monomer that had a liquid crystalline property, 4‐[ω‐(2‐methylpropenoyloxy)decanoxy]‐4′‐cyanobiphenyl, with a vinyl monomer that had a photosensitive group. For comparison, low‐molecular‐weight (low‐MW) photoinitiator (Darocur 1173) also was used. Attention was directed to the structural effect of the photoinitiators on the electro‐optical properties of polymer‐dispersed liquid crystal (PDLC) film in which the LC phase occupied a major volume (80 wt % of the composite film). For the preparation of PDLC films by the polymerization‐induced phase separation method, the optimum UV‐curing temperature was observed at 50°C, a temperature slightly higher than the cloud temperature (T_cloud) of the low‐MW LC/matrix‐forming material mixture. It was found that the electro‐optical performance of the PDLC cell fabricated with the oligomeric or polymeric photoinitiator was better than that of the PDLC cell made with a low‐MW photoinitiator (Darocur 1173), exhibiting lower driving voltage (V₉₀) and higher contrast ratio under identical formulation conditions. Oligomeric photoinitiators allowed premature phase separation between the LC and matrix phases, resulting in relatively pure LC‐rich phases. For the polymeric photoinitiator, incorporation of mesogenic moieties into the photoinitiator resulted in not only a well‐defined LC/matrix morphology but also in low driving voltage (V₉₀) because of reduced friction at the LC/matrix interfaces. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 162–169, 2006     

Preparation of poly(styrene‐b‐2‐hydroxyethyl acrylate) block copolymer using reverse iodine transfer polymerization

Reverse iodine transfer polymerizations (RITP) of 2‐h‐ydroxyethyl acrylate (HEA) were performed in N,N‐dimethylformamide at 75°C using AIBN as initiator. Poly(2‐hydroxyethyl acrylate) (PHEA) with M_n = 3300 g mol^?1 and M_w/M_n <1.5 were obtained. Homopolymerization of styrene in RITP was also carried out under similar conditions using toluene as solvent. The resulting iodo‐polystyrene (PS‐I) with (M_{n, SEC} = 607 g mol^?1, polydispersity index (PDI) = 1.31) was used as a macroinitiator for the synthesis of amphiphilic block copolymers based on HEA with controlled well‐defined structure. Poly(styrene‐b‐2‐hydroxyethyl acrylate) (PS‐b‐PHEA) with M_n = 13,000 g mol^?1 and polydispersity index (M_w/M_n) = 1.4 was obtained, copolymer composition was characterized using ¹H‐NMR and FTIR, whereas SEC and gradient HPLC were used to confirm the formation of block copolymer and the living character of polymer chains. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

UV固化丙烯酸酯胶粘剂的合成及性能研究

以甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、甲基丙烯酸缩水甘油酯(GMA)和丙烯酸羟乙酯(HEA)为共聚单体,并以二缩三丙二醇二丙烯酸酯(TPGDA)为交联剂、十二烷基硫醇(NDM)为链转移剂和乙酸乙酯为极性溶剂,采用核/壳溶液聚合法合成了侧链含C=C的丙烯酸酯预聚体;然后以此为基体树脂、丙烯酸异冰片酯(IBOA)和三羟甲基丙烷二丙烯酸酯(TMPTA)为活性稀释剂、651为自由基光引发剂和碘鎓盐为阳离子光引发剂,制备了UV固化胶粘剂。研究结果表明:合成丙烯酸酯预聚体的最佳工艺条件是m(BA)∶m(MMA)∶m(GMA)∶m(TPGDA)∶m(HEA)=20∶60∶10∶4∶6、n(TPGDA)∶n(NDM)=2∶2、w(热引发剂)=3%和w(乙酸乙酯)≥70%(均相对于共聚单体总质量而言);自由基/阳离子混杂双重UV固化胶粘剂比单一自由基UV固化胶粘剂具有更大的附着力和耐酸碱性,此时前者的最佳配方中w(预聚体)=55%、w(651或碘鎓盐)=5%、w(IBOA)=15%、w(TMPTA)=12%和w(GMA)=8%(均相对于胶粘剂总物料质量而言)。     

Synthesis and properties of UV‐curable poly(imideurethane) acrylates

Poly(imideurethane) acrylates (PIUAs) were obtained in solution by a three‐step method, from cycloaliphatic diisocyanate, benzophenone tetracarboxylic acid dianhydride, three kinds of diols, and two kinds of monohydroxyacrylic esters (HEA, PETA). These polymers were used as components of the photosensitive compositions together with two reactive diluents and four photoinitiators. Using a mercury lamp (power 375 W) and Irgacure 907 as the photoinitiator some compositions spin coated on glass were cured rapidly within 10–30 s. In the preliminary photolithographic study with less advantageous exposure of λ_max 406 nm, patterns with 10‐μm resolution were acquired. The cured PIUAs exhibited in thermogravimetric analysis a superior thermostability to 400°C than known poly(urethaneacrylates) and poly(urethaneimide) acrylates from aromatic diisocyanates. DSC and DMTA were used to characterize the thermomechanical stability and the glass‐transition temperatures of the PIUA segments. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 971–980, 2004     

Ultraviolet‐curing behavior and mechanical properties of a polyester acrylate resin

Ultraviolet (UV) curing technology has been widely used in many applications because it has several distinct advantages compared to solvent‐based processes or thermal‐curing technology. The effects of photoinitiator types and their contents as well as reactive diluent types and their contents on the UV‐curing behavior and mechanical properties of a UV‐curable polyester acrylate resin were investigated in this study. Three photoinitiators, Irgacure 184, Darocur 1173, and benzophenone, were used in this study. Hexanediol diacrylate, tripropylene glycol diacrylate, and trimethylol propane triacrylate were used as reactive diluents to modify the properties of the acrylate resin. The change of chemical structure during UV curing was monitored by FTIR. A universal testing machine was used to measure the tensile properties of various UV‐cured acrylate films of different compositions. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3921–3928, 2004     

Synthesis of superabsorbent resin by ultraviolet photopolymerization

Synthesis of superabsorbent resin (SAR) was achieved by a new method, that of direct UV photopolymerization, and in particular the synthesis of a SAR of acrylic acid–potassium acrylate copolymer by UV photopolymerization was investigated. Influences of ratio (mol) of acrylate monomer to acrylic acid monomer, photoinitiators, crosslinking agents, and exposure time of UV light on the water‐absorbent properties were investigated. The results showed that the water absorbency (Q) of SAR based on Irgacure 1700 or Irgacure 1800 was 545–530 mL/g, but under the same conditions Q was 450 mL/g for the SAR based on Irgacure 651. N,N′‐Methylene bisacrylamide, hydroethyl acrylate, and glycerol were used as crosslinking agents, of which N,N′‐methylene bisacrylamide was the most effective. It crosslinked the molecular chains through attending the copolymerization with acrylic acid (AA) and potassium acrylate. When the exposure time was 5 min, the value of Q was 1368 mL/g (the content of N,N′‐methylene bisacrylamide was 100 ppm). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1618–1624, 2004     

Preparation and properties of UV‐curable fluorinated polyurethane acrylates

A series of UV‐curable polyurethane acrylates (PUA0, FPUA3, FPUA6, FPUA 9 FPUA12, FPUA15, where the numbers indicate the wt % of perfluoroalkyl acrylate), were prepared from a reactive oligomer [4,4 ?‐dicyclohexymethanediisocyanate(H12MDI)/ poly(tetramethylene glycol)(PTMG)/2‐hydroxyethyl methacrylate (HEMA): 2/1/2 molar ratio, prepolymer:40 wt %] and diluents [methyl methacrylate (MMA, 20 wt %)/ isobornyl acrylate (IBOA, 40–25 wt %)/heptadecafluorodecyl methacrylate (PFA, 0–15 wt), total diluents: 60 wt %]. This study examined the effect of PFA/IBOA weight ratio on the properties of the UV‐curable polyurethane acrylates for antifouling coating materials. The as‐prepared UV‐curable coating material containing a 15 wt % PFA content in diluents (MMA/IBOA/PFA) form a heterogeneous mixture, indicating that a PFA content of approximately 15 wt % was beyond the limit of the dilution capacity of diluents for the oligomer. In the wavelength range of 400–800 nm, the UV‐cured PUA0 film sample was quite transparent (transmittance%: near 100%). On the other hand, the transmittance% of the FPUA film sample decreased markedly with increasing PFA content. XPS showed that the film‐air surface of the UV‐cured polyurethane acrylate film had a higher fluorine content than the film‐glass dish interface. As the PFA content increased from 0 to 12 wt %, the surface tension of the UV‐cured urethane acrylates decreased from 26.8 to 15.6 mN/m, whereas the water/methylene iodide contact angles of the film–air surface increased from 90.1/63.6° to 120.9/87.1°. These results suggest that the UV‐curable polyurethane acrylates containing a PFA content up to 12 wt % have strong potential as fouling‐release coating materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40603.     

Influences of the grafting percentage of natural rubber‐graft‐poly(2‐hydroxyethyl acrylate) on properties of its vulcanizates

The graft copolymerization of 2‐hydroxyethyl acrylate (HEA) monomer onto natural rubber (NR) latex was successful using cumene hydroperoxide and tetraethylene pentamine as redox initiators. The grafting of poly(2‐hydroxyethyl acrylate) (PHEA) on the NR particles was confirmed by Fourier transform infrared spectroscopy, ¹H NMR spectroscopy and TEM. The NR‐g‐PHEA with various grafting percentages (0%, 8.7%, 14.3% and 18.7%) was compounded on a two‐roll mill with a sulfur vulcanization system. The effects of grafting percentage on the cure characteristics, dielectric properties, thermal properties and physical properties of NR‐g‐PHEA vulcanizates were investigated. It was found that increased grafting caused NR‐g‐PHEA vulcanizates to have reduced water contact angle, scorch time and cure time, while the dielectric constant and dissipation factor increased. The NR‐g‐PHEA vulcanizate with 8.7% grafting exhibited the highest delta torque (M_H ? M_L), crosslink density, tensile strength, moduli at 100%, 200% and 300% strains, and hardness, with insignificant loss of elongation at break in comparison to the other cases. © 2018 Society of Chemical Industry     

Studies on cross-linked polyurethane acrylate-based electrolyte consisting of reactive vinyl/divinyl diluents

A series of cross-linked polyurethane acrylate (PUA) electrolytes have been prepared by using 4,4′-methylene bis(phenyl isocyanate), polyethylene glycol, hydroxyethyl methacrylate and different reactive vinyl/divinyl diluents, such as methyl methacrylate (MMA), ethyl acrylate and acrylonitrile, tripropylene glycol diacrylate (TPGDA). The electrolytes were prepared by UV radiation induced cross-linking of the PUA-diluent mixture followed by swelling in a liquid electrolyte (LP-30). Depending upon the composition of the components, these electrolytes exhibited a wide range of mechanical and electrical properties. The system containing MMA as reactive diluent showed highest conductivity, but poor mechanical properties and stability in the liquid electrolyte. The TPGDA cross-linked system possesses a good combination of ionic conductivity and stability in liquid electrolytes. These systems showed good compatibility with Li-electrodes and sufficient electrochemical stability to allow safe operation in rechargeable Li-batteries.     

Preparation and properties of UV-curable polyurethane acrylates

UV-curable polyurethane (PU) acrylates have been synthesized from polypropylene glycol (PPG), isophoron diisocyanate (IPDI), and three types of reactive diluents, i.e., 2-hydroxyethylacrylate (HEA), tripropyleneglycol diacrylate (TPGDA), and trimethylolpropane triacrylate (TMPTA). The effects of soft segment length, type, and concentration of reactive diluent on the mechanical and dynamic mechanical properties have been determined. When the soft segment length was short (750) tensile strength (σ_b) decreased, and elongation at break (ϵ_b) generally increased with increasing HEA concentration, due respectively to the inferior strength of HEA homopolymer, and increased molecular weight between crosslinks (M_c). Initial modulus (E) and σ_b increase and elongation at break (ϵ_b) decreased with the increase of TPGDA concentration, and the effect was more pronounced as the soft segment length decreased. The hardness and σ_b increase with diluent concentration in PPG 2000-based materials was more pronounced with higher functionality diluent, due to the increased crosslinking density. The lower temperature glass transition peak of PU was not influenced by the TPGDA incorporation, whereas the higher temperature one moved toward still higher temperature. This was interpreted in terms of possible compatibility of hard segments and acrylates due to their similar polarity and hydrogen bonding. © 1996 John Wiley & Sons, Inc.     

Novel binder system for ultraviolet‐curable coatings based on tobacco seed (Nicotiana rustica) oil derivatives as a renewable resource

Several coatings have been developed to reduce volatile organic component emissions, such as water‐borne coatings, high‐solid coatings, powder coatings, and radiation‐curable coatings. Ultraviolet‐curable coatings are one such boon to paint industries, not only reducing volatile organic components but also increasing productivity. Most polymers industrially produced nowadays are based on petroleum, which is a limited resource. Developing new procedures for making polymers based on natural renewable resources is a resounding theme for this decade and the future also. In response to both these needs, we have investigated the use of tobacco seed (Nicotiana rustica) oil in the synthesis of radiation‐curable coatings. In this work, the alcoholysis of oil in various ratios with polyhydroxyl compounds was performed to prepare novel polyols, and these different polyols were reacted further with excess polyisocyanate to produce isocyanate‐terminated prepolymers. The prepolymer were further reacted with hydroxyethyl methacrylate to produce urethane acrylate oligomers. The radiation‐curable coating compositions were than prepared by the mixing of these oligomers with different reactive diluents, photoinitiators, and activators. These coating compositions were studied for their various physical and film characteristics, and certain coating compositions from tobacco seed oil were found to show very excellent overall coating properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Binary phase solid‐state photopolymerization behavior of acrylate cryogels under different light sources

Two types of cryogels were obtained using 2‐hydroxyethyl acrylate (HEA) and 2‐hydroxyethyl methacrylate (HEMA) by homogeneous mixing with poly(ethylene glycol) diacrylate (PEGDA) as crosslinker at subzero temperature followed by photopolymerization with two different light initiation sources (high‐pressure Hg arc lamp and UV‐LED).The solution was frozen unidirectionally at ?60 °C before polymerization and finally photopolymerized at the same temperature. The cryogels were characterized using photo‐DSC, UV–vis and Fourier transform infrared spectroscopy, and scanning electron microscopy techniques. The cryogels cured with an LED light showed a higher polymerization rate and better morphological characteristics than ones cured with a high‐pressure Hg arc. The water intake ratio of HEA/PEGDA was higher than HEMA/PEGDA for both curing sources. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46686.     

Study on the synthesis,characterization, and kinetic of bulk polymerization of disproportionated rosin (β‐acryloxyl ethyl) ester

Disproportionated rosin ((β‐acryloxyl ethyl) ester (DR‐2‐HEA) was synthesized by esterification of dispoportionated rosin (DR) with 2‐hydroxyethyl acrylate (2‐HEA) and evaluated by FTIR spectroscopy, GC/MS, ¹³C‐NMR spectroscopy. Kinetics parameters of bulk polymerization of DR‐2‐HEA in the presence of initiator AIBN was studied by using DSC. It has been assumed that the process of polymerization obey nth order empirical kinetic model to evaluate the kinetic parameters. The relative molecular weight and glass transition temperature of polymer of DR‐2‐HEA at different temperature was measured by GPC and DSC, respectively. The results showed that the temperature had no significant effect on the enthalpy of polymerization and the velocity of polymerization increased by the increase of temperature. DSC experimental data fit the simulation well while the reacted fraction (α) in the interval of 0.4<α<1. The polymer of DR‐2‐HEA is oligomer. The molecular weight and T_g did not affect by polymerization temperature. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Influence of an oligomer polyol and monomers on the structure and properties of core–shell polyurethane–poly(n‐butyl acrylate‐co‐styrene) hybrid emulsions

The free‐radical polymerization of alkenyl‐terminated polyurethane dispersions with styrene and n‐butyl acrylate was performed to obtain a series of stable polyurethane–poly(n‐butyl acrylate‐co‐styrene) (PUA) hybrid emulsions. The core–shell structure of the emulsions was observed by transmission electron microscopy, and the microstructure was studied by ¹H‐NMR and Fourier transform infrared spectroscopy. The effects of the poly(propylene glycol)s (number‐average molecular weights = 1000, 1500, and 2000 Da) and the mass ratios of polyurethane to poly(n‐butyl acrylate‐co‐styrene) (PBS; 50/50, 40/60, 30/70, 20/80, and 10/90) on the structure, morphology, and properties of the PUAs were investigated. The average particle size and water absorption values of the PUAs increased with increasing of PBS content. However, the surface tension decreased from 34.61 to 30.29 mN/m. PUA‐2, with a bimodal distribution, showed Newtonian liquid behaviors, and PUA‐3 showed a great thermal stability, fast drying characteristics, and excellent adhesion to packaging films. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43763.